Database Develop

O2 XDA III English Upgrade

I have O2 XDA III (without camera).
Does anyone know is it posible to upgrade from german to english language. My software version is:
PH20B1 B 1 GER R O2102 1.31.01 0 1 1.31.137 1.10.00 10.00
I've looked all the tutorials on wiki.xda-developers.com, but could not find the answer for this phone?

maybe this will help http://forum.xda-developers.com/viewtopic.php?t=12419&highlight=german+english+repost
Can you also try to dump your radio rom and post it on the ftp? Thanks

efjay said:
maybe this will help http://forum.xda-developers.com/viewtopic.php?t=12419&highlight=german+english+repost
Click to expand...
Click to collapse
I'm not so sure that this can help. Has anyone tryed this on O2 germany XDA III ?
Can you also try to dump your radio rom and post it on the ftp? Thanks
Click to expand...
Click to collapse
Sure, but I don't have SD card. Is there any other way to backup my ROM?

Can you also try to dump your radio rom and post it on the ftp? Thanks
Click to expand...
Click to collapse
Sure, but I don't have SD card. Is there any other way to backup my ROM?[/quote]
i think you will need need an SD card.

SS
DreamerNS
Well you have 4 problems and one thing great that is going for you!
On the posative side you have the Radio 1.10.00 which we all want to get our fingers on, this will gain you many points when it comes to helping you.
Now to your problems
1) You have a PH20B1 which is a none camera rom. As you have read on wiki you need to fix this but you cant as there is no tool that works on the new rom encription (at the momnet its under developemnt) so you are going to get a device id error.
2) Your rom number is high and thus the only WWE upgrade that will work will put you back to 1.22 (if you can fix problem 1). Now this is infact a good rom and as you see I am still on it.
3) You wnat to cahnge to WWE and thus you will be confronted with the country code error, which again you cant fix due to tha lack of a tool.
3) You have no sd card, which is a shame and they are cheap.
What you could try.
There is a fix/hack for the county code issue
http://forum.xda-developers.com/viewtopic.php?p=98811#98811
Now maybe this works also for the Device ID, I have NO idea and have never tried the fix/hack myself.
I would think that as you are the 02 you would be able to use the o2 uk rom, again you would need to try it. (it is or was on wiki)
On the 02 UK rom, extract it and run the BaUpgradeUt.exe without the fix.bat
Also try the i-mate 1.22 of wiki with the fix bat.
What ever you do, delete the radio_.ndf form any upgrade folder for I am sure you want to keep the 1.10.00 radio.
This is all safe as long as after you have started the BaUpgradeUt.exe your do not go further than the screen that tells you what rom you have and what rom you are going to install. After that, well you could end up with a brick.
So you need a SD card to save your self or you need to find the German O2 Ship file to reflash if it goes bad.
Both options would again give US the radio 1.10.00 and I am sure you will find a few others that will help you in the hope that they can get that radio.
Viel spass!

Help mda vario t-mobile (NL)

Hello,
i have upgrade my mda vario to qtek9100. know im looking for the original t-mobile(NL) rom because i want to bring it back to the store ( want het beeldscherm pieptt als hij aan staat ) who can help my??
thankss

please help my
nobody who haves a backup of a dutch tmoblie mda vario??
please can somebody help me
thankss

I have a backup of the rom on my storage card and also backuped the extended rom. I'll upload both to the ftp in a few minutes.
Installing my MDA Vario now, so don't wanna bother it to much...

Mesh said:
I have a backup of the rom on my storage card and also backuped the extended rom. I'll upload both to the ftp in a few minutes.
Installing my MDA Vario now, so don't wanna bother it to much...
Click to expand...
Click to collapse
Keep on dreaming, no one suceded till now.

With an attitude like that you're at the wrong forum :roll:
I'll upload the dump as soon as I get my bluetooth to fully work again, can't send to my laptop now.

Mesh said:
With an attitude like that you're at the wrong forum :roll:
I'll upload the dump as soon as I get my bluetooth to fully work again, can't send to my laptop now.
Click to expand...
Click to collapse
Off topic sorry for that and with respect it is not my attitude but realism, you can hopefully confince me that I'm wrong :wink:

Heijdemann said:
Mesh said:
I have a backup of the rom on my storage card and also backuped the extended rom. I'll upload both to the ftp in a few minutes.
Installing my MDA Vario now, so don't wanna bother it to much...
Click to expand...
Click to collapse
Keep on dreaming, no one suceded till now.
Click to expand...
Click to collapse
Heijdeman, do you mean that a r2sd backup can't be restored to a MDA Vario? I want to try the QTEK and K-JAM roms since I understood a backup could be restored.
In your opinion, is it imposible to revert to a T-Mobile image until they provide a ROM upgrade?
TIA, Cheers,
Cactus

Mesh said:
I have a backup of the rom on my storage card and also backuped the extended rom. I'll upload both to the ftp in a few minutes.
Installing my MDA Vario now, so don't wanna bother it to much...
Click to expand...
Click to collapse
Can you also write down how you made this backup? I have tried many ways with mine without success. I'm also trying to backup my t-mobile ROM before updating to K-Jam. However, it seems like t-mobile made a change to the bootloader.

on buzzdev.net there is a completle guide how to do this

rwijnhov said:
on buzzdev.net there is a completle guide how to do this
Click to expand...
Click to collapse
Could you give the exact link so that I can dump my original t-mobile rom for Makis117?
Thanks

www.buzzdev.net

Heijdemann said:
Mesh said:
With an attitude like that you're at the wrong forum :roll:
I'll upload the dump as soon as I get my bluetooth to fully work again, can't send to my laptop now.
Click to expand...
Click to collapse
Off topic sorry for that and with respect it is not my attitude but realism, you can hopefully confince me that I'm wrong :wink:
Click to expand...
Click to collapse
Well I made a dump of the Rom, it's around a 100mb in size.
But I'm afraid it isn't going to help people. When rared it's 84kb in size...
And I can't seem to upload to the xda-developers ftp, anyone know why?

http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
mischien heb je hier wat aan? maybe this site can help you?
about that rar i down know! kun je het niet gewoon in een map zeten zonder rarren?
thanks for the help :lol:
sorry fot the bad english

Mesh said:
I have a backup of the rom on my storage card and also backuped the extended rom. I'll upload both to the ftp in a few minutes.
Installing my MDA Vario now, so don't wanna bother it to much...
Click to expand...
Click to collapse
Hi Mesh,
I couldn't put my Dutch MDA Vario into bootloader mode. The photo + voice + reset key method is not working with mine. Could you tell me how did you do it while making the backup of the ROM?
Thanks,

Hi guys
Tomorrow I'll buy a T-mobile MDA Vario and I want to unlock it and change the language to English (as I live in France but I like it in English).
I will first try to backup the Dutch ROM and I'll try to upload it to the forum's ftp unless the existing RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe is the one you seek.
Also if you have any tips and tricks on the howto backup and restore the ROM on the T-mobile MDA Vario (HTC Wizard) I would do it asap (tomorrow).

I've bought the T-mobile MDA Vario today did the specified steps to backup my ROM:
1) Sim unlocked
2) SuperCID it (they said that the warranty is lost if you do this but I didn't had any choice). Now other ROM's can be installed on the device.
3) Used the romupdate.exe and ntrw.exe to create a dump of my ROM on the provided 512 mb mini sd
4) Used my laptop's SD reader to dump the minisd on a file (~500Mb)
Until here is the backup process, next is the restore process
5) Used ntrw to write the dump file on the minisd
6) Put the minisd in the vario and power it up by holding the voice comm and camera buttons
7) Pressed the voice button when the message Install from SD card appeared
8 ) The Install was succesful and then I rebooted the Vario and had the same install procedure as the first time that I boot it. During the first one as during this one the screen freezed and I manually rebooted, but I think that trying to press the Start button will un-freeze it.
If anyone needs my ROM's dump, let me know.
Happy new year to all
PS: Additional infos
ROM Version : 1.3.2.3 NLD
Rom DAte : 9/29/05
Radio vers : 01.04.10
Protocol vers : 4.0.13.17
ExtROM vers : 1.3.2.103
ModelNr: WIZA200

YESSS!! :lol: Please i need your ROM backup can you put it on FTP?
your the man :wink:
thanksss

yes pls upload

would have been great if you used a smaller SD card for the backup, anyway its a start for many who want the dutch vario rom.
rgs
jim

Making the Backup
Hi all,
I'm trying to make a backup of my MDA myself before flashing a new ROM.
When connecting my MDA to the USB cable while holding the camera button I get the three colours screen and my Windows XP detects a new 'USB Device' and tries to install a driver for it.
It detects the MDA in a different way than when connecting it normally. When connecting it in this way, no driver is found.
I don't know if this is related, but when running the romupdate_115.exe, it takes a while until I get the program screen and in the list of ports, the USB is not present.
What I'm doing wrong?
Thanks in advance for your help.

xda 11s stuck with serial v02.07

help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks

CHALFONTCOURIERS said:
help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
Click to expand...
Click to collapse
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.

Kasush said:
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Click to expand...
Click to collapse
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB

CHALFONTCOURIERS said:
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
Click to expand...
Click to collapse
I honestly have no idea what that file you have is. Go here and follow the steps to upgrade to WM6:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
You can find several WM6 and WM6.1 ROMs here:
http://forum.xda-developers.com/forumdisplay.php?f=386
Those 2 links should provide everything you will need.

Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob

CHALFONTCOURIERS said:
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
Click to expand...
Click to collapse
Are you running windows XP or vista?
Do you have activsync 4.5 or newer installed?
Have you tried putting the phone into bootloader mode (serial/usb on top, version on bottom) and run MA_Upgrade that came with the Helmi files?

Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB

CHALFONTCOURIERS said:
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
Click to expand...
Click to collapse
For the phone not working soft-reset. Some say you need to soft-reset twice, but I have never had to. There is a flaw in WM6 that when you disconnect the battery then connect and boot it fails to load the phone module. After booting a soft-reset will load it no problem.
For the wi-fi issue. Goto CommManager and click settings (in the lower right) and then click WLAN settings. Click turn on WLAN. This step loads the wi-fi driver. Now go to CommManager and click on wi-fi and it will work. This step must be done after EVERY reset/boot. But it only must be done once. after that you can turn on and off the wi-fi using only the CommManager as much as you like.
Glad to hear you got WM6.1 loaded and everything though.

Treo 750 dead after flashing wrong rom

I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?

ojtan said:
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
Click to expand...
Click to collapse
If you can access the tri-color bootloader screen, then your Treo 750 is NOT dead.
The ROM is bad or wiped but the bootloader is good...that is sufficient for you to flash a good ROM & get it up & running.
What do you see on the bootloader screen?
Which ROM did you copy into the mini-SD card?
You could copy the .nbh file from the original WM6 ROM Upgrade package & change it to CHEEIMG.nbh into a freshly formatted (FAT32) mini-SD card & flash using the mini-SD card method.

thanks konker. I finally figure out the way to flash it with original ROM.

ojtan said:
thanks konker. I finally figure out the way to flash it with original ROM.
Click to expand...
Click to collapse
Great! I'm glad you got your phone working again.

glad to know its working again

Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam

Any answer
Hello Sam,
I actually had the same problem, did you get it fixed?
Please let me know, how?
Thanks a lot

Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.

Apoapo said:
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Click to expand...
Click to collapse
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)

safisam said:
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Click to expand...
Click to collapse
Have you tried re-downloading the ROM in case you have a bad file? Also, have you tried a different SD card, or re-formatting the SD card you are using? Sometimes that will help, and make sure the CHEIMG file is the only file on the SD card.

startngate said:
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
Click to expand...
Click to collapse
Thanks man, i was looking for any way to HARD SPL directly from the older loader, i couldn't find any.
But i already solved loading in the SD card an "original" ROM from palm.
Now i got this treo working again

Hi all
I have the same problem, after some progress during the update it stops and now I can see just the Palm logo inicialyzing...
I stil can get the Bootloader Screen (3 collors), but when I try to pass other ROM It says "file image corrupted"...
I´ve been trying with 4 SD card that I have (512Mbs up to 2Giga), but nothing works...
It seems that the Treo doesn´t recognize the SD card!!!!
How could I Pass a ROM not using the SD card??
Any help??

Palm treo 750 storage memory problem after flashing!Please help
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!

darabah said:
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
Click to expand...
Click to collapse
First of all, please indicate which ROM you loaded on your device.
Secondly, it would help the community to help you if you could state what software modifications you've performed on the phone. eg. HardSPL etc
Lastly, a list of installed software on your phone would be useful too.

Palm treo 750 storage memory problem after flashing!Please help
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!

darabah said:
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
Click to expand...
Click to collapse
From your description, it seems both of them are original stock ROM. Is your Treo a telco branded model or a unbranded unlocked model?
If the latter, you did not have to run the other utilities to unlock the phone...just flash the ROM.
I see that you ran the ExtROM unlocker...why did you have to do that?
The ExtROM is used to store device specific ROM customization that you should not have to bother too much if your ROM is a unbranded ROM (ie. not AT&T ROM etc).
If you left the ExtROM in it's unhidden state, that could be why the system is reporting the amount of free space to be so low. You should hide the ExtROM & then hard-reset the device again to see if that solves the problem.

Palm treo 750 storage memory problem after flashing!Please help
Thank u for your reply!
My Treo is unlocked model but i don't know if it is unbranded and it is from Palm Rom not AT&T ROM.
I'm news, can u tell me how to hide the ExtROM(Can u explain how to proced please?).
Thant u for all!!!!!

Downlgrade qtek 9090 from WM5 to WM2003SE

hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..

first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?

- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"

Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it

ok, i did exactly what you wrote and now everything work! thank for you help!

why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se

first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se

SIM TOOL KIT is the only reason one would want to downgrade

Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.