Help !~
My O2IIs Bluetooth when I turn on it and go to susupend(standby mode?!) around 5 min ,then I resume the OsIIs again but the bluetooth will be turn off and on .....that have a big problems when I"m using the handset and have incoming call ! The OsIIs is going to resume ..... then the handset will be disconnect (because the BT was turn off automatically)~~But any problem when I do it in 5 min !! ......and I'm sure is not my handset connection problem!!
How can I Sovle it??
Thx ~~
First thing I'd do is ugrade to the latest ROM - you are still using the older one. If you still have problems after that it may be worth going from BT3500 to 3900.
If you don't know how to do either of the above have a little search around the forum. The new ROM is on the O2 site and there are numerous postings about the 3500 to 3900 upgrade all over this forum.
R
rakh1 said:
First thing I'd do is ugrade to the latest ROM - you are still using the older one. If you still have problems after that it may be worth going from BT3500 to 3900.
If you don't know how to do either of the above have a little search around the forum. The new ROM is on the O2 site and there are numerous postings about the 3500 to 3900 upgrade all over this forum.
R
Click to expand...
Click to collapse
Don't bother. I have 3900 on my IIs and it still does the same thing.
Thanks for rakh1 and kevinnugent reply~~
In fact ,I tried to downlaod and upgrade the newest ROM form the O2 website ! but my O2IIs is not buy in UK ! so....
In the mean time ,I"m also "cooked" (crack?!.. I don't understand what difference on "cooked" and "crack",haha~) the ROM by the "XDA3nbtool",but have the error message on installation ,that show "Radio image file checksum Error ",when I replace the original radio image,that will show the other image file checksum error.....
And I contact the O2 Custom Center in HK ,but they ask me to contact the Singapore customer service ,and said "they just have a repair service only!they haven't technical support ! "
OMG!! haha...a sick joke !! :lol: :lol:
Finally,the Singapore Custom Center still haven't the solution about this problem !... they just send the "bluetooth BT3500 update patch " for me to try (haha!!...) it can solve this problem or not !!
I have the same problem about BT disconnection
I posted an item about the same problem two days ago...
And the "official" technical support did the same to me: send me the 3500 BT Stack (and I found it in the web and installed two weeks before. Great technical support!).
In fact it's frustrating: I need a car kit that works well for my job, but impossible with Qtek. So, if I want to have a hands free car kit...I must buy another phone?.
Incredible for an expensive machine like Qtek 9090.
I have'nt tryed for the sort of multiple patchs of 3900, but I have no faith in it.
I you find a solution, please let me know.
Good luck!.
j.m.
Hey ~I have the solution now?!~and I tried it a whole day~any problem!
Firstly You must stop the "Auto Power Off" Function on the O2IIs,then go to:
http://www.pocketgear.com/software_detail.asp?id=14621
to download the "screenlock" (software) and install it ,after the installation ,you will not have the icon on the “Program file “ (haha…may be the software bug),than go to “file exploroe” ->”My Device”->”Program files”->”screenLock”->”screenlock.exe”,When you run it the first time it will be create the icon on “program file”,If you want to leave it, press the button 1 and 4 (Calendar and Message button on the IIs) simultaneously! Now !the Bluetooth will be connected every time ~
but I still hoped the O2IIs announce the newest rom update for the Asia user soon……..
By the way, when updated the BT3500 ,the “auto resume” problem will be solve or not ??because I’m updated to BT 3900 still no change…..
Thx
Cangratulations Alextly!
ScreenLock works fine, and although this is like killing flyes with a bazooka, it's the only solution that I know about it, and this convert this solution in the better one.
The only question I've got now it's about power consumption. This program Locks (turns down) the screen but, if I understood well, with the screen locked the CPU is sitill gorking "underground", so the battery life can be reduced (I must do some proves).
As far as I know, the BT3500 doesn't solve the problem (I installed and it's the same). I ignore if the 3900 it does, but I'm afraid that it will not. I have not installed because the 3900 I've fount it's some sort of different patches that and they doesn't seem to be very reliable. So I prefer to wait for official Patche. And as says "kevinnugent" seems not to work.
Let's keep the faith for official technical service (my faith it's going down for minutes).
Thanks for you're finding and congratulations. I would never find this one.
j.m.
ScrrenLock
ScreenLock it's not as fantastic as I though: it shuts down the PDA automatically when you are in no-battery mode (for exemple when you're using TOMTOM), and increase battery consumption dramatically.
j.m.
Interesting... I don't seem to have the same symptoms with my SX66 paired with my SE HBH-300 and HCB-30 (car kit). When the SX66 goes into standby, the BT seems to stay connected. If it does disconect with either handsfree, I just press the call pick-up on the handsfree and it re-establishes the BT connection within 2-3 seconds.
I'm using 3900.
Ken
SX66
In fact I think the connection must not be disconnected. And with my Qtek if you have good luck and re-establish the in some way, maybe you will hear nothing...
My car kit it's Drive Blue from Parrot.
j.m.
Related
PLS forget this, after use BT head set several time, the same problem had been happened! Sorry about this!
BT Head set problem of un-resume with incomming call when the device is suspending. how to fix!
@;Download XDA2s_1-12-178-WWE_UK_Extended_ Rom.zip from below.
http://forum.xda-developers.com/viewtopic.php?t=13072
@And extract the zip and find BA_OEM_PD_BT_Headset.sa.CAB
@Copy&Past BA_OEM_PD_BT_Headset.sa.CAB into Blue Angel and tap it to install.
@Make worm reboot and you can already finish work for replacement the new version of BtCEStack.dll (V1.604)
@@@You can also download same CAB file (but i renamed to BT_Headset.cab) from http://www.asukal.jp/BT_Headset.CAB
Now Blue Angel had became the All Mighty Machine!!!! Enjoy it!
you can see same summary on my Blog
http://asukal.seesaa.net/article/1182756.html
Also you can see how to get the missing function of dial network client service on BlueAngel (replacment of the BTWIzardPrifile.dll)
http://asukal.seesaa.net/article/1031857.html
Attention for this thread
PLS forget this,
after use BT head set several times, the same problem had been happened!!
(sometimes effective,but sometimes not effective,also sometimes auto resume the device.not sure it`s side effect or natural function of this patch)
If you want to try this, plese dont forget it is your own lisk!
------------------------------------------------------------------------------
*for The Guys who already installed and wishes to uninstall due to some side effect. You must delete them manually with following steps.
@If you are using BT function, please turn off the BT, and make worm reboot it.
@Connect IIs to PC with Activesync, and use PC explore (Or use failer which can access dinamic librallies on IIs)and find following 3 files in the windows folder of IIs.
BTAudioGW.dll
BtCeStack.dll
HFPUI.exe
@Rename them to the names to eazy find them in next step（Example;"a" or "1", and make worm reboot again, then you can delete it. You can not delete those 3 files without rename. They were untachable.
@Make it worm reboot again. it have finished already and return to the default!
has anyone found this to work?
Has this worked for anyone? This is the biggest problem with the PDA2K...
Didn't work for me. This BT Headset problem really is a pain.
We were all looking for a solution to the voice dialling problem with the BT Headset on the XDAII and there's no solution to that.
Now a year on, a new 'improved?' model and to cap it all there's no solution to even getting a reliable BT Headset connection!
Now new test of solution
http://asukal.seesaa.net/article/1204039.html
Please watch my test!!!! but i am still not sure for myself!
Somebody please post your result with OzBT
Now my bluetooth head set still working with this ozBT.
But i think my result can't say it all for you,guys.
if somebody tried this, pls post your result, worked or not! Please.
After 3 days test, its workable for ME
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
BT headset problem
Thanks vey much for all this work trying to resolve this Blue Tooth problem. However, as a newbie with my Tmobile MDAIII, where can I get official upgrade files, ROMs, etc. unless it is only from this site? In other words,
is there a Blue Angel support site in English anywhere?
Thanks!
I follow instruction of Asukal and now BT headset are usable after standby of pda2k.
Now the only problem I have are that sometimes ppc wake up without motivation. the problem was present also before use ozbt and O2 patch.
Thank you Asukal!
BT headset problem
I've tried and it works fine with jabra 250 and kondor bt 25.
Thanks Asukal you solved my big big problem.
Thanks Again :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Re: After 3 days test, its workable for ME
Asukal said:
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
Click to expand...
Click to collapse
Sure it did Asukal :lol: , don't know what to say,
thaaaaaaaaaaaaaaaank youuuuuuuuu
works great on my Qtek-9090
good work :wink:
thanks guys!
Appreciated your posting, guys!
since my last post, noboday reported my work was usefull or not.
i have been afraid i am about to become a faker! :wink:
And glad to hear that was worked for you guys!
But please do not forget, sometimes suddenly fail to reconize BT head set.
, then you can re-detect it again, you can use it again.
Do not panish me if that time come please <very little probablity>
Answer to the Mr,Guest>
@this blue tooth patch was downloaded from this forum
@you had better not to inquire anything to the XdaO2IIs support center, they are not specialized mechanics for the PDA, but just a mobile phone serveice center, they will replay you with quite different solutions to your question, it make you worth. this is my suggestion.
Mr,ilvanni> auto wake up without any motivate.
Yes i knew it, but it was not coz of OzBT, but coz of BT patch. before i tried OzBT, it also happened with BT patch. Hope you watch the battery.
--------------other way of solution for this--------------------------
Some Thailand Guy said, use the softoware to turn off the screen(but the windows is runnning), works for this BT head set problem, too.
You can try this,too. (i forget to the name of soft---may be "Screen OFF" or something like that.)
but sorry i didnt try this. need much more attention for the battery.
Re: After 3 days test, its workable for ME
Hi Guys,
I'm a bit new to this pocket pc business. I can see where your coming from, but when I try this my screen, particularly the Todat screen, wont refresh properly, ie you cant read it!
Any ideas?
Sorry i cant catch what you want to say exactly,i guess two situations.
#1;Does it mean today plug-in soft were can`t be appeared aftre wake up?<with using ozBT>
On IIs(or PPC2003) has some non-conpatible with the previouse version of Today Plugs-in Soft<World Today, tAgenda, or exToday,etc>
#2;or does it mean IIs can`t return to windows? some like freeze with susspend? if this case, i have no exipierience about that yet. sorry.
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Anonymous said:
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Click to expand...
Click to collapse
Switching the Today background to something else, them back again, sorted this for me.
Today programs disapear
Now i got it.
i think it was coz of the New OS, even without those patch, some times happen to me.Or memory condition. Blue Angel lost memory very quick and be stacked easly(too much devise resources--wi-fi,bluetooth,keyboadm many hard bottms--- used i think)
(Himala upgraded with 2003Se is better)
the solution fo this,Mr,Sparkeyxda has right answer, i also try to open option----today---and off/on today plugs in, then return to today. they will come again.
I think it coz of un-compatible of old today programs.
So this moment, i gave up use some of Today programs.
sorry if someboday have better solution, please tell him!
I had the same problem and changing the theme back and forth like sparkyxda solved it for me.
is this worth trying on QTEK9090 ?
The bluetooth problem on 9090 is that whoever calls 9090-user wih BT headset, will hear him/herself really well.. it is as if the audio that is suppoed to get to 9090-user-ear *also* is sent back as if that was somthing 9090 used said. very clear audio loopback
Hi Akusal i wonder if you are working to solve the BT hands free problem & if you need anyhelp testing devices or SW i can do that
As some of you may have found out i-mate launched its FINAL bluetooth patch yesterday only to withdraw it this morning.
Well this afternoon (my time GMT+3) they launched it again. Knowing that quite a few of you folks are NOT members of clubimate and would like to get the patch, I've downloaded them (as there are five flavors of them depending on your which ROM you are using; WWE, FRA, PTB, ITA and SPA)
Device Support - Bluetooth Patch # 2 for i-mate™ PDA2k
i-mate™ is aware of the problems being experienced with the i-mate™ PDA2k Bluetooth. This is the second patch which will improve the bonding between the i-mate™ PDA2k and other devices. With this patch the bonding between the i-mate™ PDA2k and Bluetooth headsets will be more robust, after the PDA2k has entered Power Save (Sleep) Mode. Customers have previously observed that:
- when the i-mate™ PDA2k enters Sleep Mode for a period of time, any in-coming voice call alert is not relayed via the Bluetooth link to the Bluetooth headset, so no audible alert is heard.
- when the i-mate™ PDA2k is bonded to a Bluetooth headset and has entered Sleep Mode, the device will periodically wake-up while in an idle state, without prompting by the customer, leading to unnecessary power drain of the battery.
The patch does not correct the beaming problem between devices using the Brodcomm Bluetooth stack, like the i-mate™ PDA2k, and devices using the Microsoft Bluetooth stack. We are still working on a resolution to this issue. Some Jabra BT250 headsets will also still have audio quality issues and we recommend contacting Jabra for a solution.
The correct patch to install on your device can be determined by tapping Start > Settings > System > Device Information and checking the ROM version suffix, eg x.yy.zzz WWE.
Click here to select the patch appropriate for English devices and Arabic devices and download "OEM_WWE_122_008.sa.CAB" this file is approximately 3.8 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ITA language on your device and download "OEM_ITA_122_011.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the PTB language on your device and download "OEM_PTB_122_014.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ESN language on your device and download "OEM_SPA_122_012.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the FRE language on your device and download "OEM_FRA_122_009.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click to expand...
Click to collapse
Please click on the Click here in the quote above to get the files as per your needs. No fear they are hosted on my server and you don't have to be a member of clubimate to get them.
Bluetooth version on the PDA2K
hey
downloaded the lastest version of the bluetooth patch from i-mate guess what.
The first update they did they upgraded the stac from build 2500 to buid 3500.
Now with the new version they have gone back to version build 3000.
Now he is the problem bluetooth driver still insufficient drivers with both of the stacks.
With stack 3500 when I connect to my Parrot 3300 bluetooth in the car it works fine I even get the network signal saying ok.
Now when I upgraded to the new vesrion which is build 3000 when I connect to the Parrot bluetooth car kit the network signal is not shown anymore so what the hell is I-mate do can they just release the new version or not.
My brother has a Qtek 9090 his upgraded to the new rom he get the license has expired on the Italian version what a joke.
Hows fault is this CD or Broadcom the makers of the bluetooth drivers.
I would like to known so I can pester the right people.
Thanks
Gigino
help!
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
i can put this in XDA2 or qtek 2020
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
sacaman said:
i can put this in XDA2 or qtek 2020
Click to expand...
Click to collapse
I don't belive so, it is for the PDA2K/XDAIIs/MDAIII/Qtek 9090
raiderz said:
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
Click to expand...
Click to collapse
If its working don't change it, I perfer the 3500 rather than the 3000 'cuse it works better with my Jabra 100
Re: help!
Vega said:
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
Click to expand...
Click to collapse
Just after the setup, I had exactly the issues on my QTEK9090. Go in the parameters -> Today and change the theme. After this, you shouldn't have any more screen problem. After a short test, it seems the Bluetooth problems with my Jabra 200 fixed! Good luck
thanks...
Thanks, A320!
MDA III Warning
Just installed the Bluetooth patch on my MDA III and was presented with a completely black screen after Soft Reset. The only way around this was to Hard Reset. Yet to test the performance of the patch, but thought I would pass on the warning.
Had same problem on MDAII (black screen after reset - hard reset to cure) so am using previous patch
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
but where they on clubimate :?:
there only last ROM. Has not understood humour. :shock:
Could someone upload these patches to our xda-developers ftp server under the blueangel directory. There should be a bluetooth patches directory somewhere there......
Thanks
All you should need to do is remove it from the cradle,then put it back in the cradle and restart the upgrade again. It should start to run again.
If that doesn't work,there are a couple of other things you can try.
Anonymous said:
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
Click to expand...
Click to collapse
i can't download OEM_ITA_122_011.sa.CAB
where i can find it?
10x
links are dead. Please PLEASE re-upload!!
cannot download WWE version
xda IIs users
Can somebody confirm that it works for XDA IIs please? cheers
Resurrecting DEAD threads from December 2004 will only serve to confuse the unwary! If you NEED this patch, go to the iMate website, register your phone and download it. *sigh* FYI: The patch has been incorporated into the WM2003 ROMs released since.
Tuatara ,
Is this patch incoorperated in Helmi WM5 Rom ? If not, any effect if i install this patch into BA Helmi WM5 ?
Thanks!
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Just checked the o2 site and it seems this upgrade is now available, not tried it yet but will tonight
hi, which site are you downloading from?
www.my-xda.com
Any news on whether it is worth upgrading to the .171 ROM? Seems as though the radio is back to 1.00?
bobster007 said:
Just checked the o2 site and it seems this upgrade is now available, not tried it yet but will tonight
Click to expand...
Click to collapse
We are waiting for more info about the new rom!
Might be an anomoly but I tried the 171 ROM modified and my device has hard reset twice, with the original ROM the phone stopped working and needed a hard reset to sort it out, twice.
Think I'll keep to my 162 ROM. How's everyone else found it?
http://www.my-xda.com/xda2i_soft3.html
here's the direct link for 1.11.171 - just downloading and will let you know how I get on after discovering that 1.11.170 (blackberry)didn't work with radio version as supplied.
Hi!
When I have install it. It apeared the radio 1.100
So still old radio, not v1.104
phuong said:
Hi!
When I have install it. It apeared the radio 1.100
So still old radio, not v1.104
Click to expand...
Click to collapse
that is correct. Radio 1.104 is not compatible with the Blackberry system. This is the main reason that ROM 1.11.170 was removed from the o2 website as it had upgraded the Radio version from 1.100 to 1.104.
Hi! I've just bought an O2XDAIIi. I just wonder which ROM version I should use to upgrade my XDA. Could anyone give me an advice?
MrSandman said:
Hi! I've just bought an O2XDAIIi. I just wonder which ROM version I should use to upgrade my XDA. Could anyone give me an advice?
Click to expand...
Click to collapse
I'm using Blackberry and have upgraded to the latest o2 ROM - 1.11.171. If you aren't using Blackberry, try using Pugs cooked version of 1.11.169.
Is there any change to Blackberry functionality on 71 over 69?
Won't be changing if there isn't.
I belive that if your using the o2email open and not the BES version you won;t lose your Calendar options.
We use BES so no need to change then - thanks
Well ROM version 1.11.171 seems to be as stable as 1.11.169 and I don't have to use the workaround to sync Outlook Calendar.
I wonder if o2 are going to release more XDA phones that can use Blackberry - I quiet fancy the o2 Atom but it doesn't list BB which is a shame.
171 ROM is the BT reliability resolved
Symbasean,
Stating that the 171 ROM is as stable as the 169 ROM is a little bit of a two edged sword for me.
When I applied the O2 ROM last October / November it trashed my bluetooth functionality, effectively making my Jabra 250V a large black ear ring and the XDA 11i an electronic chocolate tea pot, for use in a car.
Can you sense my frustration with O2, who offered me £10 off my next bill as compensation and then didn't give it to me.
I switched to one of PUG's home cooked ROMs and this has been 80% successful, but randomly fails to deliver the sound.
His version has been a saviour, but would the 171 be an improvement for the BT stability and reliability?
Sorry for the incredibly rambling first post. :?: :roll:
I upgraded to the new software last night and have noticed one small annoyance. I used to be able to to deactivate GPRS by clicking the connectivity icon in the title bar and tapping disconnect. Now the disconnect option isn't there for GPRS. Eventually I discovered that I could turn off GPRS by holding the end call button.
Re: 171 ROM is the BT reliability resolved
dgt1963 said:
Symbasean,
Stating that the 171 ROM is as stable as the 169 ROM is a little bit of a two edged sword for me.
When I applied the O2 ROM last October / November it trashed my bluetooth functionality, effectively making my Jabra 250V a large black ear ring and the XDA 11i an electronic chocolate tea pot, for use in a car.
Can you sense my frustration with O2, who offered me £10 off my next bill as compensation and then didn't give it to me.
I switched to one of PUG's home cooked ROMs and this has been 80% successful, but randomly fails to deliver the sound.
His version has been a saviour, but would the 171 be an improvement for the BT stability and reliability?
Sorry for the incredibly rambling first post. :?: :roll:
Click to expand...
Click to collapse
two points:-
1. please spell my name correctly.
2. "Well ROM version 1.11.171 seems" - note also the word, "Seems". I make no direct comparison on stablity, only that mine has not crashed - caveat empore......
Apologies
Symbaseian
Sorry for the mistake.
I shall try the ROM and see.
I have to agree caveat emptor is an appropriate warning with this particular device.
If it worked as well as it is should, straoight out of the box, it would be excellent.
But it does have some way to go, and without the likes of these forums, it would not happen.
Dave
Re: Apologies
dgt1963 said:
Symbaseian
Sorry for the mistake.
I shall try the ROM and see.
I have to agree caveat emptor is an appropriate warning with this particular device.
If it worked as well as it is should, straoight out of the box, it would be excellent.
But it does have some way to go, and without the likes of these forums, it would not happen.
Dave
Click to expand...
Click to collapse
I totally agree. When I first got one of these I couldn't use TT3 let alone TT5 without it locking up all the time if I used anything other than my old 128mb Compaq SD card, but having listened and learned on this forum and also on pocketgpsworld I now have a stable XDAIIi with blackberry.
It's taken a long time to get to where I'm fully happy with the device (except camera performance - but I very rarely use that anyway) often involving Tomtom tech support, o2 tech support and these forums. If you feel happy using Pugs ROM version without blackberry please go ahead, but for me that's not an option.
It's just a shame that we have had to co-develope to get a product that is finally starting to show everything that it first promised.....
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
try downgrade your RADIO to 1.13
I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse
Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?
i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps
At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then
here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207
Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse
Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse
OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?
hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi
OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)
No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.