problem with alarms - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hallo,
I seem to have the following problem with WM5.
it happens sometimes that the alarm rings, however the notification message does not appear and I can't turn the alarm off. So it keeps ringing a lot of time, even if I disable alarms and notifications. If I turn off the volume (which is not a solution anyway) it still vibrates. Also, the red light in the upper right corner keeps on flashing. Soft resetting the device doesn't solve the problem: after reloading, the alarm is still ringing.
I have 3 alarms that are set to ring at an interval of 10 minutes, like 7 am, 7.10 am, 7.20 am.
It looks like this happen when the third alarm rings and the device is turned off.
Has anyone experienced the same problems?
any clue?
thanks

Related

No notifications anymore after longer time on silent of vibrate profile

Normally my notifications are working fine. But when i switch to another profile, silent or vibrate, and after a while back to normal, my notifications (clock alarms etc) are not working anymore. No display warning, no sound, nothing.
I'm using pocket Travel Alarm, but also these alarms are not working anymore. After a soft reset, all the notifications (alarms) are coming at the same time, and my Kaiser is hanging. I have to do a soft reset again.
Does anyone have the same problem or better: a solution?
Thanks in advance.

Alarm volume doesn't work

my alarm volume doesn't seem to work, i have the volume turned on, i have the volume cheked in sounds and notifications. I worked before, the only thing i do is turn the phone on vibrate when i go to work and turn the volume back on when i get off, i've been doing this every since i got the phone in november, now all of the sudden the volume doesn't want to work on teh alarm when i have the volume on, when i go to the alarm i get the popup that says make sure the volume is turned on in the sounds and notifications settings, which it is. i did a soft reset that didn't work, i then took out the battery and sim and put them back in thinking the phone just needed to clear itself or what ever kind of like shutting down a pc completely, and that didn't work either, any ideas on this? also every since taking out the battery and sim card, i now i have a blue circle in the top bar next the atenna were if i push it, it brings up the option to ativate PTT anyone know how to get rid of this?
brianlb said:
my alarm volume doesn't seem to work, i have the volume turned on, i have the volume cheked in sounds and notifications. I worked before, the only thing i do is turn the phone on vibrate when i go to work and turn the volume back on when i get off, i've been doing this every since i got the phone in november, now all of the sudden the volume doesn't want to work on teh alarm when i have the volume on, when i go to the alarm i get the popup that says make sure the volume is turned on in the sounds and notifications settings, which it is. i did a soft reset that didn't work, i then took out the battery and sim and put them back in thinking the phone just needed to clear itself or what ever kind of like shutting down a pc completely, and that didn't work either, any ideas on this? also every since taking out the battery and sim card, i now i have a blue circle in the top bar next the atenna were if i push it, it brings up the option to ativate PTT anyone know how to get rid of this?
Click to expand...
Click to collapse
anyone? i managed to get teh second part were i get the blue icon on the top bar to go away, but the alarm part i can not figure out.
Perhaps you should try custom alarm applications like Pocket WakeUp or Mortplayer or something the like.
Most of them can override volume control to a fixed point (even if you put your Kaiser on vibrate, the alarm app starts itself and sets the volume to a chosen strength, like 50%)
Stay0Puft said:
Perhaps you should try custom alarm applications like Pocket WakeUp or Mortplayer or something the like.
Most of them can override volume control to a fixed point (even if you put your Kaiser on vibrate, the alarm app starts itself and sets the volume to a chosen strength, like 50%)
Click to expand...
Click to collapse
i'm not really looking to get a new program, what i had did work fine for me, i just can't figure out what is making it not work, the alarm vibrates, just no sound.
brianlb said:
i'm not really looking to get a new program, what i had did work fine for me, i just can't figure out what is making it not work, the alarm vibrates, just no sound.
Click to expand...
Click to collapse
I had sound problems once. It happened when I set a music program to associate with mp3's (default is Windows Madia Player), once I removed the association, all played normal again.
I think I changed it with the back Advanced Configuration Tool.
Or try your alarm with a wav or mwa file, perhaps you'll get sound then.
No sound
I've had my Tilt for 2 days, and since I flashed the latest Dutty 6.1 ROM I have no sound from alarms, music, sliding keyboard, phone ringer...nothing. I can hear the other caller talking and they can hear me. My phone vibrates but does not ring, even though I have it set for vibrate and ring. Can anyone help?

HD7 bugs with alarmclock?

Is anyone else experiencing these bugs?
This usually happens after an alarm has went off or if i have not noticed that one has been going off.
* The bottom speaker just turns off, no sound is received. So i'll get a phone call and i answer but no one can hear me, reboot fixes the issue but wtf.
* just 10 min ago the alarm went off to remind me of something and i hit dismiss and the phone went back to the main tiles. I tried to lock the phone and it didn't do anything. I hit the back button and nothing happened, i then try to navigate and the screen is frozen. Live tiles are still moving but no input is read. The power button doesn't work as well, i had to pull the battery.
Anyone have these problems?
I have the same issue about the alarm. I have multiple alarm setup and then if one of them alarms go off and i didn't turn it off the screen just froze, there is no input from the touchscreen but the tiles are working. I guess it is a bug in the programming that disables the touchscreen if the alarm that goes off wasn't turn off.
Hopefully this is fixed with the rumored update on thursday.
Alarm Bug
+1 with the alarm bug. Hope the software update fixes the poor sound level as well, as a working alarm would be nice but a working alarm that i can hear is much better
+1
Same problem
I use Nokia X2 for alarm clock
Alarm Problems
I use an app called Nightstand clock from the Marketplace. The sound of the alarm tones is much louder than wp7 alarm tones. Give it a try it hasn't let me down yet & more importantly has never froze. It can even run under the lockscreen. It hasn't affected the sound on my HD7 either.
Well i have the same problem and for now i download alarm clock 7 and only works if the phone its not lock cause in lock status the alarm does not sound.
I also have this problem
alarm goes off, and if i don't hit dismiss and let it run, the mic gets turned off
grrr
+1, i am also having the same issue
+1, i am also having the same issue. :laugh:
I have HTC HD7

[Q] Note makes harsh alarm sound but no alarm set and no way to cancel?

Hi all,
Randomly my galaxy note makes a very harsh alert sound, as if an alarm has been set but the noise it makes is not one of the available alarm tones and there is no way to stop it, no alarms are set and no alarm notification in the notification bar and no alarm snooze screen is displayed when it goes off.
There's no pattern to it, it just happens at random but never when the phone is sat idle, only ever when I am using it. If I reboot the phone it continues to make the sound, the only thing I can do it turn down the ringer volume and eventually it will stop on its own.
I thought it may be some kind of overheat warning as the first time I experienced it the phone was quite warm but its happened several times now when the phone has been cold, that said it must be some kind of hardware warning because when the phone is rebooted, the sound starts even before android is booted.
Any ideas?
I don't spose someone registered, or could have registered your device with a service such as lookout?
I know they can remotely activate alarms similar to what you describe with the only way to deactivate it to turn the phone off.
Just a thought?
davexeno said:
I don't spose someone registered, or could have registered your device with a service such as lookout?
I know they can remotely activate alarms similar to what you describe with the only way to deactivate it to turn the phone off.
Just a thought?
Click to expand...
Click to collapse
Extremely unlikely, I've had the phone just a few months from new in a factory sealed box and the phone is never out of my sight. Thanks for the suggestion though

Question Sometimes alarm has no sound in silent mode

Hi, sometimes I will put my phone on silent and on a couple of occasions, I have been awake when my alarm is due to go off, and the screen changes to the alarm screen and has the slider to turn it off, but there is no sound at all.
Most of the time there is, but I wonder why sometimes there isn't.
Has this happened to anyone else?
I have checked the alarms, and they all have the volume set to full.
Regards
James
It happened to me too. Today too. I would like to understand if there is a issue or I am to switch off the alarm while sleep

Categories

Resources