Can anyone tell me what's going on with my XDA2i pls. It's been very stable for the past 6 months which is the last time I Sprite backuped. But last week the camera disappeared and Windows media player appeared on the camera button. So I thought I would re-install the ROM then restore from the June Sprite backup - remember I have been using the camera which must have been on that backup.
After the ROM install, the camera is there and working, but if I try to then do a restore from the Sprite backup, the camera is removed.
Thanks
Mike
search it at here, im sure you'll find any camera software to install....
if you need something great camera application, try CoolCamera at www.ateksoft.com
you can do it! Mike!
thanks
Thanks Clustered .... I will definitely try that camera app, - does it improve the quality of the images (I find them much worse than the supposedly poorer camera in my old XDA 2)
I have since discovered that the camera app is not being removed (there are still 4 camera related files in the Windows directory), but all reference to these are being removed somehow, so that the camera program is not visible in the 'Programs' section, nor is it associated with the camera button on soft boot.
I have temporarily got round the problem by placing the camera.exe icon in the SPB Today function, so at least I can get it started with the stylus
Any clues .... should I be looking at some registry entries.
By the way .... ironically I would like to reprogram the default for the camera button to scroll-down which I use in microsoft reader. Do you know how I could do this (tried Vito button mapper yonks ago but it seemed to cause quite a few problems)
Thanks
Mike
I had this, do you find the battery is discharging at a quicker rate??
The history with mine was it lost the cam function swapping to WMP on the button. Only way to cure it was to hard reset.... of course it would go and do the cam fail just when i had got everything set up and running nice for a few months. I found as it went further down the line that using the back up i had would instigate the cam error quicker than if i didnt.
It started to do it more and more. So i sent it back, they said all fixed. of course it wasnt 'cos the internal battery had discharged thus doing a hard reset clearing the error
Finaly on the 3rd return they did a board swap... which meant i had to get tomtom to re do the activation codes for me.
Load of hastle but it hasnt been a problem in 3 months now.
Aaargh ! yes that's exactly what's happening - battery running down quickly, so I just ordered a coupla new ones (fortunately didn't pay the O2 price of £39 and have ordered from Hong Kong at about a fiver).
Sounds like it isn't worth me returning it to O2, as a board swap would cost a lot - it's 13 months old now
Interestingly though ..... a hard reset puts it right, but as soon as I restore data and programs from a Sprite backup, the problem is back. And yet the Sprite backup was done back in June when I definitely wasn't having this problem. And an earlier backup does not cause it. Does it seem possible that one of the applications we are using has a time -related problem? Only thing I can think of recently was the British summer time auto correction.
Thanks
Mike
dont worry bout it being 13months old they got 2 yr warranty!!!! get it down to them now. you will get it sent off, if they dont replace the board, call the number for the repair company as soon as you get it back, tell them its doing the same (as you can tell from my post before the prob clears n they just turn it round) they send you a package and you send it off as a bouncer, give then a fault report, they will swap the board.
make a note of all yer device info, imea, mac address etc. to confirm the board has been replaced.
i put a pen mark on the warranty void sticker under the battery covering the screw to see if they went inside.... they didnt the first times it went back.
if you have tomtom you will need to scan n send them a copy of the board change document to get your codes reset, also send them the device code tomtom gives you when you try to run it. they require that. it took them about 5 days to sort out at tomtom
You know what gets me about this place is i could have just said send it back but i prefer to give folks as much explination... like i would in return.... unlike i have had on posts ive made where folks have said post it in the right section etc.... not telling me where or assuming you understand all about reg editors or rom changes..... following link from page to page is so frustrating... sorry rant over now
hope you get it sorted soon.,... wish i could get my Q's answered.
Thanks mate .... I'll do all that. Fortunately I can afford the time, as I've got a couple of working XDAII that two of our guys ditched in favour of execs, so I'll just set one of those up until they sort the XDAIIi
Thanks
Again
Mike
Me too
Hi Guys
You have described exactly what happened to me. I use a Motorola BT head set (820 I think) and the tom tom navigator 3 with BT satelite reciever.
I gave up in the end. It seemed to be due to the BT stack or somthing to do with the Tom Tom BT drivers. I have 2 xdaIIi's and I now use one as a gps only (does not even have a sim card) and the other one as a phone (with the Motorola head set) I dont have any problems.
If I try to use two BT items together..... with in about one week the moment i loose the camera and the battery lasts about 6 hours from full.
If I remember correctly the head set would stop working or lock up the phone, you then have to do a soft reset then the camera goes etc etc.
I can tell you I am absolutley fed up with BT I am yet to come across a BT anything that works first time every time. Even if it does work today, tomorrow who knows if it will work. The reason i am looking athe postings is because my new £400 Garmin Nuvi 660 wont connect to the XDA!!**!^%$!£"
Any way best ot luck, you are going to need it.
Hmmmmm .... don't think it's bluetooth, as I don't ever have it switched on - I prefer to use the bog standard handsfree speaker kit and don't use GPS/TomTom.
Plenty of things lock up the phone though :-(
I've gone back to my XDA II and ya know what .... I prefer it. The quality of colour saturation on the screen is much better - OK it's not quite as bright as the XDA IIi but the latter is not really any good itrself on a bright day.
.... and the camera in the II is just a gem - OK only 640k but the way it renders the image is just like silk compared to the naff camera in the IIi
... and I'm not really gonna miss the wifi, and I never really bothered using IE in landscape.
So I think I'll stick with the old II and see what you guys think of the Orbit (?) when it comes along
Mike
Well.... great service (eventually) from O2. They sent me a replacement without even waiting for the faulty XDA2i. Bad news is they sent an XDA2s ....but they then sent an XDA2i the next day. It's not brand new but presumably it's been 'reconditioned'.
Charged it up, did a hard reset - camera was there OK. Did a Sprite restore from a known good time (last June). But camera had disappeared again
I guess it's remotely possible that they have sent me the one that Richard (?)returned but I think he said they'd definitely done a board swap on his.
Despite the good advice on here, I'm still inclined to thhink this may be a software conflict problem rather than a hardware issue. And somehow it seems to be connected with time. I had not installed anything new when I suddenly lost the camera about 3 weeks ago. I'm restoring from a Sprite backup that definitely was not displaying any problems when I made it.
Regards
Mike
my cam issue would come back if i used a restore from a good point too. But that was on the old board. Ive just done a full clean install of everything and its seems to be ok. I did wonder is some gimp out there had writen some kind of virus that i had got somehow.
It might be the startup programs/services...
Try checking the Camera_Detect.lnk if it's functioning normally...
Although I'm really not sure if it is the cause but I have a similar problem but not with the camera...
Rather, it's the rotatescreen icon...
I hard reset and the icon is there but when I have installed programs it disappears once I soft reset... not sure which of the programs installed overrides the icon startup...
But I think it's during the startup that somehow make these services (camera, screen rotate, etc.) fail to run because some of the programs might be clashing with them on startups/bootups/soft reset...
I think you might be correct, as the replacemnt XDA2i that O2 sent displayed exactly the same problem when I put all my stuff back on it, but after another hard reset I put just a limited range of utilities back on, and so far in a week or so, it has been faultless
Mike
Related
Hi
i currently own a Vario 2 from Tmobile, had it about 18 months now and more than happy with it.
The question is, is it worth upgrading to a Vario 3. i have read some of this forum and seems to be a lot of negative views on the Vario 3.
So should i upgrade or just sit with my Vario 2?
the only reason would be if you needed integrated GPS...
In any other cases : NO
I dont really need a seperate GPS as i have a full tomtom.
so i guess the vario 3 does not add much more to the choice then.
more ram, more rom, larger storage capabilities.... its not just the gps chip
I would agree on the whole stability issue. My hermes was a nightmare for the whole 18 months i owned it. Soft resets several times a day, occaisonal spontaneous hard resets, crashes for no reason, sleep of death, non-functioning touch screen...the list goes on.
But the tytn 2 (which i do own) is a crippled platform (video drivers) and you may well find that waiting for something like the imate 9502 (if it ever comes) would be better.
I just bought one (but didnt have the II before to compare) and I have to say its far surpassed my hopes and expectations... so far that is... lol... I did and do own an Acer N50 premium pda and that I had to soft reset often and while the screen was a little larger the III is more clear and vibrant... all in all you wouldnt be going wrong getting one.
Yes forgetting the driver issue the Kaiser is better phone. Like Mike said much better feel and more stable. The extra RAM was really why I upgraded from Hermes and I am happy with it over all. I dont want to bring the driver thing to this thread also, but I wish HTC would do something about these issues. These days putting a unfinished product to the market is one thing, but saying we aint going to fix this is another.
I guess it comes down to how much you would have to pay. If you get a good deal and good price from your old phone why not.
I only use the office apps email etc. I dont use the camera, play games, watch video or use even the gps.
My heavyest use could be like: writing a new email, Word and Ecxel open for copying something for the email and i get a call, all in the same time. This is when i dont want my phone to crash and Kaiser is been working great for this type of use.
tsadek said:
But the tytn 2 (which i do own) is a crippled platform (video drivers)
Click to expand...
Click to collapse
Is it actually any worse that previous model in this respect though? As in, can it be lived with considering the fact you no longer have to:
tsadek said:
Soft resets several times a day, occaisonal spontaneous hard resets, crashes for no reason, sleep of death, non-functioning touch screen...the list goes on.
Click to expand...
Click to collapse
Personally I would put up with lag to some degree if it meant I no longer had to soft reset several times a day and risked loosing everything with a random hard reset...do you know how long it takes to re-install and re-configure these blooming things!
Steve-C said:
Ido you know how long it takes to re-install and re-configure these blooming things!
Click to expand...
Click to collapse
5 Minutes to be exact. sprite backup has made restoring a matter of minutes rather than hours. I do alot of testing with my TYTN II being an MS beta tester plus beta testing for a few other companies I have to do hard resets to change configuration. I have about 6 different backups on mine used for different tests but to hard reset its a breeze. sprite backup is well worth using (plug not intended)
I've been using Vario II for quite a long time. I had only issues with TomTom on the stock WM5 ROM. From the first cooked WM6 ROMs I've been quite happy. Nevertheless, I decided to change for Vario III. And I don't regret.
It's slimmer, I do feel that 128MB Ram make a difference.
There are 2 things I don't like. First one, I cannot use it as a torch when goin down the stairs to the loo in the middle of the night and that ****e quality rubber covering the microsd slot. After a few card swaps it looks as if it had been used for a year, not 2 weeks. If it was made from harder plastic, everything would be ok.
Steve-C said:
Is it actually any worse that previous model in this respect though? As in, can it be lived with considering the fact you no longer have to:
Personally I would put up with lag to some degree if it meant I no longer had to soft reset several times a day and risked loosing everything with a random hard reset...do you know how long it takes to re-install and re-configure these blooming things!
Click to expand...
Click to collapse
Its a tough one especially as i have a friend who owns a hermes and never has any problems with it.
Knowing what I know now I would probably not upgrade and wait a bit and see what appears in the next 6 months as well continue to pester orange for a properly functioning handset.
That said the Kaiser is VERY liveable with and does what i ask of it but the slowdowns are noticeable and quite disappointing.
I too have a Vario II from T-Mobile. Worlds worse phone by far. Mine's been back for repair twice. Keeps crashing, buttons lock up. Last time it went back because every time it crashed (twice a day) you had to reboot it. Then the alarm clock would go off for 40 minutes on vibrate and speaker and couldn't be stopped with out taking the battery out.
Totally fed up with this horrible phone. I was so fed up I put the phone in the microwave to trash the system board so T-Mobile had to give me a new one.
Got the phone yesterday and it crashed... pressed reset on the bottom with the stylus. This morning phones locked up again while selecting a ring tone. Argh....... I want my Nokia 9300 communicator back.
I'd love the Nokia E90. HSDPA and it has a good reputation.
I've an iPAQ 2790 with a 624Mhz cpu and 256Mb ram so I really don't need this thing from T-Mobile. Maybe ebaying it is the solution to my problems.
forgot to mention the new vario II back from T-Mobile has windows mobile 6 on it. Just as rubbish on this phone as windows mobile 5.
I personally find the Vario II with WM6 on it very stable. There is no comparison with WM5 - now I reset it more out of habit than any need. There are some issues but nothing that causes me real problems.
Having had both a Kaiser (on loan) and a Hermes for the last 4 months having to pay for an upgrade or going through loads of fuss to get one is not really worth the extras the Kaiser has over the Hermes.
A fresh user I would tell to get the Kaiser ofcourse.
Id also add that the vast majority of users in the Hermes section and from the people I know who use them havent had such extreme issues as soft resets daily and random Hard resets, most of the issues people encounter are due to 3rd party apps conflicting with eachother.
The driver issue with the kaiser is a pretty poor point personally since I tend to use coreplayer quite alot and the playback on the Hermes is flawless.
Id say if you already have a hermes then the added extras on the kaiser aint really enough to justify an upgrade (since knowing HTC a TyTN III or something like is soon around the corner), but for a brand new user its worth getting one.
I had a VarioII for 18 months before upgrading to a VarioIII, and I know exactly this dilemma.
Does the VarioIII have enough to persuade you to ditch the II?
My answer is yes - but with qualifications.
I had the BT GPS/TomTom/powered car kit setup on my VarioII, so the in-built GPS is of value. My TT Navigator software installed with no fuss on the VarioIII, and that is more stable (I had occasional hang ups in TT6 which hitting OK then opening the TT6 dsoftware again alays got past). Its behaved flawlessly in this regard, even though the GPS unit isnt as good as my BT SirfStarIII unit its certainly up to the job.
Like others have said, the extra RAM seems to make a huge difference to performance - very few soft resets and NO hard resets in the month I've had the phone. Also, I had the classic VarioII "screen align drift" issue, and I've not had to recalibrate once with the VarioIII yet.
My biggest issue is with the screen slide going the "wrong" way. It just seems daft. This means putting the stylus away with the screen in landscape is now a left handed function and damn fiddly, and dont get me started on where the scroll wheel is now! It used to be so easy to roll with your thumb in landscape mode - now its a right index finger job, and is behind the open screen. Poor decision, HTC.
I flashed my VarioII to WM6 via the t-mobile website, and that has performed better since, so maybe a VarioIII isnt a necessary purchase. However, I'm enjoying mine, and that is the best acid test of all.
Good luck.
This phone is making me like...crazy!
and this is why:
I synct some playlists to the phone with windows media player 10, suddenly all playlists on my diamond are empty.
When i removed all the playlists on windows media player 10 to sync them again, it deleted all my songs!
now i got all my songs onto the device again, and wanted to alter 1 playlist, it took windows media player 6 minutes, to just alter, replace, 1 pooping playlist!\
Its not possible to remove a playlist created in the touchflo music player itself.
Not able to select it and then delete it.
Half of the icons in the games folder are ****ed up, we already have a thread with solutions(i tried all of them), but none of them worked.
And the performance, even with the tlr rom or whatever the name was, the diamond still goes slow!
And the battery depletes quickly, with auto attach off, and incoming beam off.
Cant receive a file with bluetooth, with incoming beam on or off, it keeps saying my pc is a new device and asks if i want to set a password, no matter if i set a password or not, it goes back to the menu, and still says my pc is a new device
And i used a mod of the diamond tweaks thread, to auto lock my diamond when the screen goed off.
Well, 1/5 times, it autounlocks itself when i turn the screen back on. not good...
And finally, the opera browser is sometimes not doing what i want. sometimes goes to a random place on the page, if i move and let the stylus go, it moves back to that random page, to fix this i need to quit, then restart opera.
This happens about 1/5 times i use opera.
Is this where i payed 481 euro's for...?
Any ideas how to fix this sh!t is welcome, i already did a hard reset to try getting rid of some problems.
borgqueenx said:
This phone is making me like...crazy!
and this is why:
Click to expand...
Click to collapse
Nothing to complain about the phone?
marco899 said:
Nothing to complain about the phone?
Click to expand...
Click to collapse
what do you mean?
theres a whole list of bad things there.
btw: forgot to mention that the diamond stylus made some nasty scratches on the screen when wiping over the screen in opera to scroll page, or goto next photo in touchflo, ect.
Got a protector included for that.
Install a fresh rom, I don't have any of your problems.
I use bluetooth a lot:
Sending files (goes hell fast), don't want to use cable when using .cab files here
For my parrot
For use as a modem (have reached 120kbyte/second) when online with phone!
All flawless.
I have very very good results with HTC's own new rom update via e-club.
TLR nr. 2 was quite buggy at my phone.
GOod luck!
borgqueenx said:
This phone is making me like...crazy!
and this is why:
...
Any ideas how to fix this sh!t is welcome, i already did a hard reset to try getting rid of some problems.
Click to expand...
Click to collapse
Spare yourself next trouble to come and sell it, as I did with mine
czbird said:
Spare yourself next trouble to come and sell it, as I did with mine
Click to expand...
Click to collapse
what have you got now may i ask?
Humbly returned to my previous P535.
I must admit that apart from Diamond, there is currently not many devices to choose from on the market... Was thinking about getting P750, but still unsure...
Xperia scares me, mainly because of the unusual screen resolution (dunno how all the apps will handle it) and that also is supposed to be made by HTC...
Maybe Diamond Pro will not suffer from these newborn diseases that my Diamond had - will see...
i think im going for the iphone 3g. will be expensive though...
the touch diamond really disappoints me...
borgqueenx said:
Its not possible to remove a playlist created in the touchflo music player itself.
Not able to select it and then delete it.
Click to expand...
Click to collapse
Use the hardware buttons beneath the screen. You can navigate to the playlist you want to delete, and hold the 'enter' button to get the menu to get the 'right mouse button menu'.
Using your fingers it is impossible as it automatically selects the playlist if you press it. No menu will pop up.
borgqueenx said:
i think im going for the iphone 3g. will be expensive though...
Click to expand...
Click to collapse
What do you mean? It will be much cheaper than the Diamond.
I wonder if you're expecting to install applications on that phone, or do any customization...
Mwahahahahahha!!!!
Another Winer! XD
I'd give this post 5/5 for creativity, 6/5 for whining and -1 for usefullness ^^
you can almost FEEEL that you joined only after buying the phone, and I'd guess that it's your first WM one..
Anyway, regarding your problems..
If your phone really is that bad, it's probably broken (pre-production, grey, some dimwit dropped it in the shop or any other reason). In any case, return it by warranty, and get a new one..
Having so many people love this phone, and being able to fix the issues.. and only you and a handful of others run around whining.. Surely it's obvious that it's either a lack of hands.dll or a simple hardware failure..
I mean you should be smart enough to grasp it.... ermm.. right?
Cheers
P.S. Oh, and please don't be offended by this post.. It was mainly inspired by your post anyway, but it was written half-jokingly as I couldn't really answer seriously to that amount of QQ
@ 205_laCoste...
You're my hero.
Had a lot of trouble removing two playlists, but using the hardware buttons solved it right away....
Thank You!
I'm ready to throw my diamond out the window, for pretty much the same reasons. I paid way too much money to have so many problems. And I shouldn't have to flash a new rom. It should be good to go out of the box.
Before I'm also accused of being a whiner, there is a plethora of posts of people having the same problems....with no solutions. The bluetooth issue is a biggie. I tweak my phone to enhance it, but I shouldn't have to be a programmer to simply make it function properly. To suggest that is just arrogant.
There are things that I absolutely love about this phone, but simply as a phone it sucks.
most of the time it is not the fault of the phone but the person
using it.
a lot of people have come here after having a normal phone and
dont understand how to use this one.
treat it more like a computer than a phone.you dont have to be
a programer you just have to know how to read a thread and
follow the directions.
if you have a 1.37 rom you need to upgrade it to a 1.93.
1.37 is crap.okay it shouldnt have been but it was that why
it was upgraded to 1.93.
if you still dont get it then sell the phone.go buy a fruit
phone and get ripped off just like all the other sheep out there.
I have to stand up for nursie here. I've returned my diamond several months ago (yeah, it was driving me nuts) and am happily living with my P750... these offenses are absolutely not necessary and untrue as well as uncritically extolling the device - gee, it's just another PDA
czbird said:
I have to stand up for nursie here. I've returned my diamond several months ago (yeah, it was driving me nuts) and am happily living with my P750... these offenses are absolutely not necessary and untrue as well as uncritically extolling the device - gee, it's just another PDA
Click to expand...
Click to collapse
I have to agree, to an extent.
It's generally accepted on here that the Diamond is badly configured out of the box, which is why new users are recommended to flash a new ROM. This is not a good thing, although it's great we have such a good community of chefs to help solve the problem.
What's less well accepted is that much of the HTC software on the Diamond is slow and awkward. I'm talking about TF3D and the HTC dialer in particular, get rid of them and you can make the Diamond a great little phone just like your P750.
964rs777 said:
most of the time it is not the fault of the phone but the person
using it.
a lot of people have come here after having a normal phone and
dont understand how to use this one.
treat it more like a computer than a phone.you dont have to be
a programer you just have to know how to read a thread and
follow the directions.
if you have a 1.37 rom you need to upgrade it to a 1.93.
1.37 is crap.okay it shouldnt have been but it was that why
it was upgraded to 1.93.
if you still dont get it then sell the phone.go buy a fruit
phone and get ripped off just like all the other sheep out there.
Click to expand...
Click to collapse
I upgraded to 1.93. And I'm quite proficient at reading and researching. I'm also very proficient with current technology. I get it. What you don't get is that a consumer spending big bucks on this phone shouldn't have to resort to advanced tweaks (which I understand, BTW...you won't find me here asking newbie questions) in order to bring the phone up to basic performing standards.
Again.....yours is a fine example of ignorance masking itself as arrogance.
Heeeelpp !!!
I am going crazy over this problem :
I have had my HTC Diamond for less than two months and it has worked fine.
Two days ago it started misinterpreting my stylus' pointing on the screen.
It seem that the sensory-element in the screen has "moved"...
I have recalibrated the screen several times and it works for some 6 - 10 clicks.
Then the touch of the stylus is either not registered (if I try to reach something on top part of the screen) or I get results as if I was pointing between 0,1cm - 1,5 cm or more above og under (it varies) the actual contact point of the stylus (needless to say - I have given up using my fingertip).
I have tried with soft reset and have also tried the hard reset but to no avail.
It means that I can't use the phone for one thing and also, that most of the other functions are out of reach or very very hard to use because of the displacement.
Ozgur ? / Anybody ?
Chuckle
I have exactly the same problem on my wifes Diamond. Just havent got round to reporting it yet, thought i'd let her suffer a while first.
Suffering
mikey1963 said:
I have exactly the same problem on my wifes Diamond. Just havent got round to reporting it yet, thought i'd let her suffer a while first.
Click to expand...
Click to collapse
If it is acting up like mine, she must be crawling the walls by now and refusing any form of physical contact - just like the phone does ...
Mine is so bad now, that I can't call a number from my list or pick up the phone without 4 -5 tries at hitting the right spot let alone using any other function.
Against better knowledge I today updated the ROM with the new one from HTC - and it is quite evident, that is is a hardware thing.
I am handing in my complaints and the phone today.
I had the same problem on dutty's v2.2 rom yesterday. I reflashed a radio as i had problem with gps as well and it is good back again. Reflash your radio. If not flash radio and other rom. Usually HTC rom don't upgrade your radio!
Same problem here, my diamond stated misinterpreting slightly the stylus, now it's all just messed up, wherever you click, it detects the pulsation at the upper left side of the screen. It doesn't pass the calibration phase either.
I did not try to reflash the radio, just reflashed the stock SPL and original Vodafone ROM for sending it to RMA. However they are telling me that the whole RMA-thing will take AT LEAST 2 weeks. Over 15 days without my phone. I need it, that's madness! They should give the users a new phone and send the other back to HTC for whatever they want to do with it!
I think it happened after I tried playing a bad-formatted WAV file and the phone crashed. Should I try the Radio thing?
I just got my Diamond back from repairs and wanted to compare experiences:
1)
I first bought a Diamond two months ago. It came with 1.37 ROM series on it, the screen wasn't too yellowish, but touch function wasn't responsive and the GPS was a MESS!
(of course, I tried many ROMs official and unofficial, almost every Radio ROM and various Hard-SPL. None of that fixed the problems.)
I could cope with with the other flaws, but I just couldn't bear my GPS wasn't getting a fix, no matter how much sattelits were in view...
It worked at first, but soon started to display '66666' instead of the location and finally, it would never display any location again.
I tried every tips and tricks and softs, it helped giving me more and more satellits in view and apparently active, but at the end my crappy GPS could never turn the datas received into a proper location...
2)
I sent my device back to warranty (after flashing back to official ROM and SPL) and had to wait for about a month.
(the technician at first tought I was just a noob unable to set his phone properly, but after two days of attempts, he had to admit that there was something wrong with my phone and sent it to the the headquarter for replacement of motherboard and so on.
3)
The new phone I got came directly with 1.93 ROM and a little bit more yellowish screen, though, there is no spot or stain on it. So the coulour doesnt bother me.
But from the beginning I noticed the new phone was much more responsive even at the slightest touch.
From the first try, the GPS got a fix in about 1 mn time, with only 3-4 satelits in view.
I installed Hard-SPL and the latest Australian Official ROM, and though the screen seems now a little less responsive than before, the GPS is still working, fine.
I'm a VERY happy user of Diamond now, but I'm still wondering one thing:
it looks like once the warranty technicians understood that I was very demanding about quality and complete functions, they took time but gave me a phone totally different in terms of behaviour and quality of the components sensitivity of screen, GPS etc.
Is there some bad production series that they never tells publicly about, and much more better series that they give you as a replacement once they understand you will bother them until the end of time if you are not satsified?
Plz tell your experience about having received two new diamonds with totally different behaviour and quality of the components.
I guess you are totally right!!!
My first device was pealing paint in the aluminium frame on the second day, work very good by the way.
Now i´m on the second device and i my hardware keys, especially the call button is sometimes irresponsive and i have to push it several times to enter the dial.
Tried cooked rooms as well, and the call button issue still remains, so i´m a little unhappy with my diamond experience.
I've noticed that whenever i turn on my display after having left the diamond unused for sometime the lcd doesn't switch on smoothly, what i mean is that it first displays a grey pattern(only for a ms or so) and then the desktop( lcd off>>grey flash>>desktop). Usually the transition from off to desktop is quite smooth, but in my case its not!
Is this a s/w issue or h/w ?
I've never experienced that particular problem myself, but sounds like H/W problem to me...
just been through a couple of other threads related to the grey screen of death...i've had it once...it happened while i ended a call, had to soft reset to resolve it.
take a look at the grey screen of death i'm talking about
Pretty scary indeed!
It might not be a coincidence that you experienced both: grey transition when switching on the screen and once, the grey screen of death after a call...
Two different effects of the same defective part in your H/W?
a solution!, almost
untill now i've had auto brightness control switched off and the brightness was set to minimum to save battery life, but now i just tried switching on auto adjust backlight and the problem seems to have vanished.....coming out of standby is smooth as ever!
although i've to say that i don't quite understand the logic behind it.
*EDIT*
it doesn't help for long
blufade said:
a solution!, almost
*EDIT*
it doesn't help for long
Click to expand...
Click to collapse
This is what I was worrying about...
Your method sounded like a work around to avoid the display failure. But as a matter of fact, there must be a reason for the display to fail. (bad screen, power supply or something...)
By the way, I'm more and more convinced about my assumption that there are bad production series and better ones:
Today I had my device connected to my PC through USB for a couple of hours. In the meantime, I was downloading and deleting messages, watching google video on opera, after that I used wifi etc.
In this situation, my first Diamond would have got hot like hell and my hand could barely stand the pain...
Since many people were complaining about over-heat problems, I thought that was a common problem with Diamond.
But the new one did not get that hot. Just a little over-warmed, but definitely not too hot. From that phenomenon, I can see what I felt about a better touch-flow behaviour, a better GPS and so on is a part of a whole:
I was first sold a ****ty phone, and now I finally got a proper Diamond!
People with bad series, you don't have to cope with all those troubles, ask for a replacement phone!
my diamond gets heated up quite a bit at times....but i dont fully uderstand what exactly is the cause.....i've had experiences with the diamond getting pretty hot while using wifi & or gps and on another occasion i was watching a DVDRIP via wifi(@ full power) using core player and also with gps cycle running in the backgroud, still the diamond stayed well within reasonable limits.
i think it has to be a software problem, possibly the radio s/w
would you mind sharing the radio version of your diamond?
As written in my signature, I'm using the 1.00.25 which is included in all latest official ROMs.
By the way, I hope you did not cast a spell on me! (just kidding)
Today I experienced my first grey screen!!!
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Just for one second, looking like an old black and white TV screen trying to tune on channels.
Hope that was the first and last time. In ordinary calls, (without being synchronized to the PC at the same time, it never happened so far...
sorry to hear that my friend
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Click to expand...
Click to collapse
I'd the same experience except for the fact that my diamond wasn't connected to a PC.
I hard reseted my diamond yesterday, but the grey splash while i turn on the display from standby(post 3) still exists ( ......i don't suppose its a software problem anymore.
blufade said:
i don't suppose its a software problem anymore.
Click to expand...
Click to collapse
Why not trying to send it back to the seller and get a new one?
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
Click to expand...
Click to collapse
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
blufade said:
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
Click to expand...
Click to collapse
You can stay there and wait for 5 more minutes in the shop while they are attending other customers, just to proove your point.
If they are honest, they will not deny the fact!
foxium said:
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
Click to expand...
Click to collapse
knave said:
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
Click to expand...
Click to collapse
There might be some tweaks in the cooked ROMs that avoid the problem, or it might be due to some bad flashing or defective hardware.
If not, how do you explain that I've never experienced this with my previous HTC phones (wizard, Trinity...) nor I experienced it with my Diamonds (the first one and the new one) with stock or cooked ROMs.
except for that very special time, when I received a call while downloading messages through Active Sync.
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.