Help !! I have burned my hp6515 with image for imate jam
After it is burned, I have done an hard reset ( pressed ON and soft reset )
but it seems died
Can I return behind ?
try this
do a lot of hard resets
your boot loader will say Serial when you connect to the craddle will say USB download the 2003serom from hp in the correct lenguage upgrade it and enjoy
i hope this could help you
****nEuEzIel****
All OK!!
tank You londere.
For bootloader the device hw6515 I have pressed :
power on
camera
joy
soft reset
All at same time.
All OK!! I can do now the reflash of my device!!!!!!!
Tank You very much.
Ciao.
replly
tk3w said:
tank You londere.
For bootloader the device hw6515 I have pressed :
power on
camera
joy
soft reset
All at same time.
All OK!! I can do now the reflash of my device!!!!!!!
Tank You very much.
Ciao.
Click to expand...
Click to collapse
dont worry enjoy it
***nEuEzIeL***
Related
I have put back a wrong backup ( a backup from before I flashed my Wizard ). Now after I do a reset it keeps hanging in the Windows Mobile screen and won't start...In fact if I do a hard reset it does the same...it won't let me install all over...
HELP!
Found the solution: Hard resetting is slightly different than mentioned in the manual: :!:
DXL007 said:
You have to hold down the buttons (comm. manager+voice command
) then insert the stylus... then remove the stylus wile still holding the buttons and wait a second. then let go of the buttons.. it will then ask you to hit send to hard reset.
Click to expand...
Click to collapse
Found here: http://forum.xda-developers.com/viewtopic.php?t=45576&highlight=wizard+booting
Thank you so much!!!
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Yesterday, I installed the custom firmware OTP 7.5. The thing was, that this firmware is in english and I needed a swedish one, so I entered regestry editor and changed a couple of things and mae the keyboard swedish. Everything worked perfect till then. When I tried these,
HKLM-SOFTWARE-MICROSOFT-INTERNATIONAL
Here you can add the desired language code:
ACP: Regioal setting (Hungary is 1252)
LCID: Language setting (English is 1033)
plus I changed the mui to the swedish, my phone wont enter windows and the usb cant connect now. It gets to the screen where it says "OT7" then it sticks there.
PLEASE HELP.
hard reset
If nothing else works, you should do a hard-reset (you said you've just flashed your phone, so there's almost no data loss).
how do I do a hardreset?
how do I do a hardreset?
Press both the soft keys and reset the phone but dont leave the two soft keys untill you see the hardreset screen,then press the green button. It will then perform a hard reset for you.
Sid_dominic56 said:
Press both the soft keys and reset the phone but dont leave the two soft keys untill you see the hardreset screen,then press the green button. It will then perform a hard reset for you.
Click to expand...
Click to collapse
Can u show with pics what buttons I must hold in?
Thank you guys, everything worked out perfect
Ada DJ said:
Thank you guys, everything worked out perfect
Click to expand...
Click to collapse
hay man what did you do to it which buttons did you push..
Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
dhellb0y said:
Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
Click to expand...
Click to collapse
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
gtrix said:
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
Click to expand...
Click to collapse
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Between hope and hate
dhellb0y said:
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Click to expand...
Click to collapse
It is absolutely necessary that your device does enter bootloader mode.
Press On/Off button, DPad and Soft Reset all together!!
Your device should show 'Serial' now! Connect to your PC and the device should change to: 'USB'.
Otherwise you got a nice paperweight now, and that would be bad.
Did you follow this, as you flashed the first time?
http://forum.xda-developers.com/showthread.php?t=332215
Did you use XP od vista 32bit (64bit does not work!?!) and did you follow this guide?
http://forum.xda-developers.com/showthread.php?t=428469
Never disconnect the device or the power-charger while flashing.
Try to reflash to get your sweet back, for us it is the most important to find out what went wrong to prevent others to do the same mistake.
Good luck!
hi, i have a problem with my phone no longer wants to boot and do not know what to do. I tried the hard reset but did not want to start. Can you help me? I apologize for my bad English
have u tried to reset ur phon by small button under stylus the holding VOL Down
if u can see 3 colors screen u can just flash it
Yes I tried everything goes normally until I try to turn on phone. I think the phone can not boot ....
can any one help me please.....I tried with mtty and not work....
I solved it. It seems that the battery was defective