Waiting that WM 6 resolve the problem, with the help of JETware we found a reasonable solution.
1 - Install Jetware v 1.30;
2 – From Settings – Connections – Bluetooth – Devices, delet the paring with Jabra BT8010
3 – Softreset your Advantage;
4 – On your Jabra BT8010 select Settings and Factory Reset;
5 – From your Advantage (connected to ActiveSync or GPRS) go to this link www.jetwaremobile.com/bthfx/Device/Nokia_HS-12W.jcf.
6 - When you download that file from your phone, you should get a prompt asking which paired Bluetooth device the settings should apply to: Choose Jabra BT8010 and Done;
7 – Turn your Jabra BT8010 on, and pair him again with the Advantage, and that’s all.
If you go thru this steps as I sayd, you shold see your Jabra display caller ID (of course if the caller is in your constact list in the Adavantage).
With this solution we have, at least, 2 problems:
1 - In the call list (on Jabra) it stores the name, not the number, so you can't dial using the calll ist;
2 - If you have another bluetoth device (ex: Parrot CK3100) in your car the caller ID in that device may not display.
Dtread1
Can't get this to work. Any one.......?
victoradjei said:
Can't get this to work. Any one.......?
Click to expand...
Click to collapse
After step 7, don't forget:
- In Jabra BT8010 activate the show caller ID option (Settings - Display - Caller ID - ON).
- In JETware settings you should activate the Caller ID (Programs - Bluetooth Options - Hands-Free Config - Menu - Advanced Options).
I forget to mention: I have updated the Jabra software to V 1.33 (I'm not sure if this makes diference...)
carmenelectra said:
Hi, I wanted to share these with you guys:
bear chicago layout myspace
carmen electra nude
Click to expand...
Click to collapse
Don't click on any of the junk above. It's all SPAM and trash. Must not have had a date tonight so he resulted in spamming the forum. LOL
dtread1 said:
After step 7, don't forget:
- In Jabra BT8010 activate the show caller ID option (Settings - Display - Caller ID - ON).
- In JETware settings you should activate the Caller ID (Programs - Bluetooth Options - Hands-Free Config - Menu - Advanced Options).
I forget to mention: I have updated the Jabra software to V 1.33 (I'm not sure if this makes diference...)
Click to expand...
Click to collapse
finally I have it working. The fact is when you receive a call you need to push the button of the menu in the jabra and will appear the caller id.
thanks dtread1 for this solution, is great.
carmenelectra said:
Hi, I wanted to share these with you guys:
bear chicago layout myspace
carmen electra nude
Click to expand...
Click to collapse
It was nice of Carmen to come on here and direct us to some "Art Pamphlet" style photos of herself wasn't it?
Can you explain under what circumstance this fix is required? My Jabra BT8010 and Ameo worked perfectly straight out-of-the-box, caller ID and all.
spoonter said:
Can you explain under what circumstance this fix is required? My Jabra BT8010 and Ameo worked perfectly straight out-of-the-box, caller ID and all.
Click to expand...
Click to collapse
We are looking at displaying of caller names (from your Ameo contacts) when a call comes, and not just the +1234..... thing
OK, I see. That would be cool. Good luck!
In the mean time I have used the Jabra Software to set up a phonebook on my earpiece. One thing I noticed though was that I had to omit the +xx part of the phone number otherwise the callerid would not find a match.
Thanks for giving this long awaited solution to my Jabra BT8010. So far showing contacts on bluetooth headset only working with i.Tech Clip D. Good work, Bro!
beginner said:
finally I have it working. The fact is when you receive a call you need to push the button of the menu in the jabra and will appear the caller id.
thanks dtread1 for this solution, is great.
Click to expand...
Click to collapse
Hi beginner:
By default, the Jabra BT8010 doesn't show caller ID.
If you don't want to push the button every time you have an incoming call you must configure the Jabra like this:
(Settings - Display - Caller ID - ON).
dtread1 said:
Hi beginner:
By default, the Jabra BT8010 doesn't show caller ID.
If you don't want to push the button every time you have an incoming call you must configure the Jabra like this:
(Settings - Display - Caller ID - ON).
Click to expand...
Click to collapse
I know, the manual says that but the device doesn't want...
dtread1 said:
Hi beginner:
By default, the Jabra BT8010 doesn't show caller ID.
If you don't want to push the button every time you have an incoming call you must configure the Jabra like this:
(Settings - Display - Caller ID - ON).
Click to expand...
Click to collapse
Hey thanks dtread1 cool it works for me just great! Just wondering though i still have this weird problem that even though i have not selected the stereo option on after a while the bt8010 reverts to this; and all sound is routed through the ear piece. I check the BT settings on the phone and stereo is unchecked but appears to be over ridden by the bt8010. Dont suppose you have a solution for this?
faisal.husain said:
Hey thanks dtread1 cool it works for me just great! Just wondering though i still have this weird problem that even though i have not selected the stereo option on after a while the bt8010 reverts to this; and all sound is routed through the ear piece. I check the BT settings on the phone and stereo is unchecked but appears to be over ridden by the bt8010. Dont suppose you have a solution for this?
Click to expand...
Click to collapse
In my case, when I do not wish all sounds (including TomTom voices) to be routed to the Jabra, I just go to
Settings
Connections
Bluetooth
Devices
select Jabra BT8010 and unpick the option “Wireless Stereo”.
After + - 5 seconds, all sounds came thru Advantage speakers except the phone and stays like that until I revert this configuration.
Regards
In my case, every morning i turn on the jabara and athena they will auto connect but even the wireless option didn't ticked, all sound will routed to jabara. What i do just open the option and choose wireless stereo ok, then unthick again and work normally.
Actually is that any ways to repair that?
Thanks guys will give it a go ......
dtread1 said:
In my case, when I do not wish all sounds (including TomTom voices) to be routed to the Jabra, I just go to
Settings
Connections
Bluetooth
Devices
select Jabra BT8010 and unpick the option “Wireless Stereo”.
After + - 5 seconds, all sounds came thru Advantage speakers except the phone and stays like that until I revert this configuration.
Regards
Click to expand...
Click to collapse
The keyword here is "after + - 5 seconds". Thanks for this effective tip.
your tip work with the lg pen
thx
Combination of Jetware, Jabra BT8010 and Dopod U1000 give me the best performance. Thanks to this forum for bringing solution to my bulk Dopod.
dtread1 said:
I forget to mention: I have updated the Jabra software to V 1.33 (I'm not sure if this makes diference...)
Click to expand...
Click to collapse
It does - I couldn't get v1.25 to work. V1.33 works a treat. Thanks for this!
Related
Hi:
I can’t manage my Jabra (BT8010) to show caller ID, even with JETware (v1.30).
I recently made the upgrade on Jabra to V 1-33-0 and still can get caller id to function.
Anybody have a solution?
Thanks.
dtread1 said:
Hi:
I can’t manage my Jabra (BT8010) to show caller ID, even with JETware (v1.30).
I recently made the upgrade on Jabra to V 1-30-0 and still can get caller id to function.
Anybody have a solution?
Thanks.
Click to expand...
Click to collapse
you need to reset the Jabra to factory default and pair them again
wu5262 said:
you need to reset the Jabra to factory default and pair them again
Click to expand...
Click to collapse
Thanks for your hawser, but I did as you say, and the Jabra display only shows the number that is calling not the name that is in my contact list.
Could it be something that went wrong in the first boot of the Advantage?
Hi,
The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.
dtread1 said:
Thanks for your hawser, but I did as you say, and the Jabra display only shows the number that is calling not the name that is in my contact list.
Could it be something that went wrong in the first boot of the Advantage?
Click to expand...
Click to collapse
no, shouldn't be, btw, you need to have the caller ID function turn on from Jetware. Now delete the bluetooth headset from your device, software restart, reset your bluetooth headset to factory default, then pair again. Hope this will works
dpbakker said:
Hi,
The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.
Click to expand...
Click to collapse
are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.
dpbakker said:
Hi,
The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.
Click to expand...
Click to collapse
Forgive me but I don’t think it works like you said “The Jabra can't look into your contacts on your PDA”
IMHO, is the Advantage software that should “send” the caller id (name) to the Jabra.
That’s watt JETware does with several hands free devices like Parrot, etc.
As wu5262 said, and if the software is compatible, the caller id (name) must appear in headset as long as you have them in your contact list on the pda/phone.
I thing I’m going to do a hard reset in the Advantage to see if it works ok.
In the mean wile if anybody finds the solution, it will be welcome.
Thanks again
dtread1 said:
Forgive me but I don’t think it works like you said “The Jabra can't look into your contacts on your PDA”
IMHO, is the Advantage software that should “send” the caller id (name) to the Jabra.
That’s watt JETware does with several hands free devices like Parrot, etc.
As wu5262 said, and if the software is compatible, the caller id (name) must appear in headset as long as you have them in your contact list on the pda/phone.
I thing I’m going to do a hard reset in the Advantage to see if it works ok.
In the mean wile if anybody finds the solution, it will be welcome.
Thanks again
Click to expand...
Click to collapse
good luck with your try, just to let you know, it took me a while to get mine working, you might have to play around with the Jetware advance setting, i have the voice dialing and suspend after call disable, the others are all on. And also i am using version 1.2, the beta version doesn't work for me. And remember you need to factory default and pair the headset again when you done with changes.
wu5262 said:
are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.
Click to expand...
Click to collapse
Hi,
I just tested it (again). Or it shows the caller-id or the name stored in the Jabra BT8010. So you don't see the name stored in your (PDA)contactlist corresponding with the caller-id
wu5262 said:
are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.
Click to expand...
Click to collapse
Whats the "iTeck clip D"?
It is itech clip D, http://www.itechdynamic.com/en/products_spec.asp?cid=1&pid=01130
dpbakker said:
Hi,
I just tested it (again). Or it shows the caller-id or the name stored in the Jabra BT8010. So you don't see the name stored in your (PDA)contactlist corresponding with the caller-id
Click to expand...
Click to collapse
then i think you are doing something wrong, mine one shows exactly as what my contact in my PDA
wu5262 said:
then i think you are doing something wrong, mine one shows exactly as what my contact in my PDA
Click to expand...
Click to collapse
you have to train us. Mine is not working.
wu5262 said:
then i think you are doing something wrong, mine one shows exactly as what my contact in my PDA
Click to expand...
Click to collapse
Please kindly show us a step-by-step description on how to make that possible. Thanks in advance for your kindness.
wu5262 said:
are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.
Click to expand...
Click to collapse
Can you confirm the iTeck clip D to work well with Dopod U1000 as I'm planning to buy one?
dtread1 said:
Hi:
I can’t manage my Jabra (BT8010) to show caller ID, even with JETware (v1.30).
I recently made the upgrade on Jabra to V 1-33-0 and still can get caller id to function.
Anybody have a solution?
Thanks.
Click to expand...
Click to collapse
Where did you get V1.33?
The one on the site is V1.25.
ok firstly, the DOPOD U1000 works perfectly with iTech clip D, you can display caller Name on it with no problem.
The step is nothing special, personally i suggest you delete the pairing of headset first, then install Jetware, then go to Advance setting in Jetware, tick the caller ID box, then software restart you machine, make sure you factory default your headset, then pair them together again, now you can have caller Name on.
Slave1 said:
Where did you get V1.33?
The one on the site is V1.25.
Click to expand...
Click to collapse
1.33 is beta version, i am using 1.25 only
wu5262 said:
ok firstly, the DOPOD U1000 works perfectly with iTech clip D, you can display caller Name on it with no problem.
The step is nothing special, personally i suggest you delete the pairing of headset first, then install Jetware, then go to Advance setting in Jetware, tick the caller ID box, then software restart you machine, make sure you factory default your headset, then pair them together again, now you can have caller Name on.
Click to expand...
Click to collapse
Thanks a lot. At last I can relieve after you've convinced me.
Slave1 said:
Where did you get V1.33?
The one on the site is V1.25.
Click to expand...
Click to collapse
Go to this site and download.
http://uswww03.gnnetcom.com/myjabra/bt8010_control_center_na.html
If this is beta, in the jabra site, they dont say
Hello people,
i've been searching but couldn't find a thread about bluetooth carkit probs with diamond.
I have a parrot 3100 and always worked just fine with the wm6.1 device I had (Prophet).
But with diamond it's quite a mess.
When phone rings:
- Parrot rings
- Answers call
- Parrot mutes (? Mute-symbol on parrot)
- Cannot unmute, on phone there is no sound.
- Sometimes parrot disconnects a second or two.
When making call
- Also mute problem
- Other line can't hear me, must talk in phone?
Even buggy, sometimes hangs, just working really annoying, cannot rely on the carkit. Missed several callers today.
But, sometimes it just works...
Anyone recognised this, any fix or workaround? It should be able to work propery.
Also wonder, why my parrot gives the contacts as contact /m for mobile and contact /w for work in normal list, instead of grouping them under one name (contact -> work, mobile etc).
Have you tried firmware upgrade on your Parrot 3100?
http://www.parrot.com/uk/support/downloads
OMG what an Idea.
I'll take this laptop into my car and fix it.
I have the same parrot and I'm having similar issues. It's annoying because when it gets "muted", the parrot is functioning as if had a call and it blocks the music from the cd-player and it won't get unblocked until I turn off my car.
I think I'll try to update the parrot firmware as staroip said...
you can give this software a try.
http://www.jetwaremobile.com/
This has been solved similar problems with my CK3000.
\\yoshi
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Hi all,
I also have problems with bluetooth and my Audi Bluetooth kit:
Connecting and phoning works fine but:
the phonebook:
- Names are wrong displayed (Surename and name are switched)
- on every number he deleted the "+" ... :-( on the car-screen (MMI)
In the phonebook on the diamond all Numbers have the e.g. +49 ... but on the screen in my car there is no "+" and of course the number without the "+" does not work...
- special chars like ä, ö, .. are not displayed correktly...
So what can I do, and whats that Parrot software you are talking about? EDIT: I just saw the parrot is an external bluetooth kit, right? So no solution with parrot software for my problem
FYI: I had a sony ericsson W950i with Symbian before and there everything worked perfektly with my bluetooth car system, so I hope I can also fix the problems on my Diamond with WM 6.1 ...
Thanks,
MrDiamond.
How did you update your Parrot kit?
Can you do it over bluetooth?
Been using the TD in my Land Rover (Discovery 3) with its bluetooth PTI. Works like a dream.
Auto connects, access to dialled, missed and received calls. Address book navigation using head unit and steering wheel control.
Better than when using my Nokia N95... that never did work with the recent called, dialled, missed lists.
Ironically the LR PTI is made by Nokia
Just need a power charger now as having a bluetooth connection running all the time kills the battery big time.
yerfdog said:
How did you update your Parrot kit?
Can you do it over bluetooth?
Click to expand...
Click to collapse
Yes, look at parrot site. New firmware is available there too.
Version 4.18 an same problems
Riel said:
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Click to expand...
Click to collapse
I update to version 4.18 of the parrot software, and the same problems are here.
What is your Rom and Radio?.
Ok, not sure if anyone got the same problem as mine, but here is my problem:
I have a Diamond using AZTOR v7 Rom, radio vBS14 if that matters and Sony Ericsson DS205 as my headset. I start my bluetooth on my diamond and can pair up with the DS205 without any problem. I can also listen to music without lag and sound is also crystal and solid.
When there is a call kicks in, I can answer the call by pressing a button on my DS205..... However, the problem comes when I end my call, the headset will be disconnected afterward and I have to manually press a button on the DS205 to make it reconnect. Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
I don't have this problem, but i have another problem, when i use the orignal rom, i can use my headset(jabra bt3030) in my diamond and it will automatically connect to use hands free and wireless stereo mode when i turn on bluetooth, so when i change to use swift 7.5 full rom, i have to resetting the bluetooth in diamond everytime when i close bluetooth
I can only get wireless stereo for my Plantronics Bluetooth Stereo headset. Any ideas why I can't get hands-free. Radio issue?
It was possible with some earlier ROM, but I can't remember which... (yes, I'm a flashing addict).
I'm having the same exact problem & it's annoying as hell. At this point, I can't get the bluetooth function on the phone to activate at all. I use the same bluetooth on another phone with no problems whatsoever, so I know it's the phone. I'm running the original rom.....not a flasher.
Have you tried Jetware?
Sorry, just installing this doesn't change anything. Still no hands-free.
Is there a specific option you want us to set?
shinji_lee said:
Have you tried Jetware?
Click to expand...
Click to collapse
lit2fly said:
... Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
Click to expand...
Click to collapse
Yes - I have a very similar problem with my jabra SP700. The Diamond 'forgets' the wireless bluetooth mode every time I disconnect the two devices (although the Stereo Bluetooth icon is still showing in the status bar).
For a short while I was having to re-pair the devices every time I got in the car - until I found the same workaround as you.
There must be a proper solution???
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
juanfervs said:
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
Click to expand...
Click to collapse
I have this value in COD key but I have the problem anyway.
Any solution to this annoying problem?
i use my diamond with my bluetooth handsfree kit in the car, it is classed on the phone as a headset though. the sound is ok, a bit echoey but ok. but the microphone doesnt seem to pick up my voice, i have to really shout for people to hear me, on my old Xda Orbit it worked fine. any ideas?
Hi,
I'm having problems connecting my HTC HD2 to my Volvo S80 bluetooth, The phone sync's OK, I can dial calls but I get no audio through the cars speakers; neither does it dim the sound.
I happend to use a HTC TYTN II with the same car, where it all worked flawlessly.
Does anyone have the same problem with his/her Volvo?
Does anyone have a working combination of a HD2 + Volvo?
Any help/direction will be appreciated.
I have the same issue with my Jag.. have you tried to initiate the call FROM the car vs. from the phone?
warnink said:
Hi,
I'm having problems connecting my HTC HD2 to my Volvo S80 bluetooth, The phone sync's OK, I can dial calls but I get no audio through the cars speakers; neither does it dim the sound.
I happend to use a HTC TYTN II with the same car, where it all worked flawlessly.
Does anyone have the same problem with his/her Volvo?
Does anyone have a working combination of a HD2 + Volvo?
Any help/direction will be appreciated.
Click to expand...
Click to collapse
pjmurphy77 said:
I have the same issue with my Jag.. have you tried to initiate the call FROM the car vs. from the phone?
Click to expand...
Click to collapse
Yeah, I've tried it both from the phone, as well as the keypad of the car. Funny thing is that the phonebook seems to synchronize correctly between phone & car, so I have a working connection.
It's just the problem that I have described earlier in this thread.
Did you manage to solve it?
It is very wonky - I can see the addressbook on my car's display, i can dial and have a convo but it hangs after I hang up the phone. I cannot dial from the phone which is strange. I imagine a software patch could repair
warnink said:
Yeah, I've tried it both from the phone, as well as the keypad of the car. Funny thing is that the phonebook seems to synchronize correctly between phone & car, so I have a working connection.
It's just the problem that I have described earlier in this thread.
Did you manage to solve it?
Click to expand...
Click to collapse
Try setting the authenticated connection to OFF
Dunno if it will help, but from
Start-Settings, then <menu> All settings (its the quickmenu bottom right)
Bluetooth -
then you can set properties (nickname and authorized connections)
------------
Having similair problem with Bluetooth Headset and Cyberon Voice Speed dial software. Won't work unless initiated the call from phone)
WOW!!! You did it! thanks so much... who would have thought I should turn auth connection OFF!?!
lucid said:
Dunno if it will help, but from
Start-Settings, then <menu> All settings (its the quickmenu bottom right)
Bluetooth -
then you can set properties (nickname and authorized connections)
------------
Having similair problem with Bluetooth Headset and Cyberon Voice Speed dial software. Won't work unless initiated the call from phone)
Click to expand...
Click to collapse
Volvo Connection
Hi - I am having exactly the same issue with the connection in my C30, it syncs fine, connects okay just no audio on either the phone or the car
I have tried the fix above which didnt work for me - any ideas?
I have got it working fine on a bluetooth headset so not the phone
My Volvo dealer did it
Everything solved, by installing the latest bluetooth software into my car. It seems that an update is available twice a year, and I have just had my Volvo dealer install the latest into my one year old car.
Everything is now working fine.
(And then I thought that Bluetooth was a certified standard, but hey, I work in business software, so I probably should have known better )
I can highly recommend driving by your Volvo agent.
Volvo Bluetooth HTC HD2
Warnink:
Where are you located in the world? My Volvo dealer (and Volvo Norway) could not find any software update for my car. I have an 2010 V70 and I have the same issues as you had.
Did your dealer give you any details about the software?
André
I was lucky while it lasted
When I drove off from my dealer, he made sure that I had the last version of the bluetooth software. Everything worked smoothly then, and also for a couple of days.
Unfortunately I am back to square one now, since it stopped working again.
On another forum, I received some replies, telling me it has to do with the bluetooth stack, that is being used by the HTC HD2. I am sofar unable to verify this, and neither do I have a solution.
I have sent an email to HTC as well, telling them about this issue, but have so far not received any reply.
Hope that either Volvo, or HTC will pick up on this issue, because the combination of driving a Volvo, and using a HD2 can hardly be matched (but only if they function properly) If you encounter a solution, keep me (us) posted.
(By the way: I live in Holland )
the same...
Hi !
I do have the same problems with my XC70 MY10. My Bluetooth version in the car is 04.22_R. Which version do you have !?
In the past with my Touch HD I used Jetware bluetooth handsfree 1.40 and most of the time it worked. Unfortunately that version is not running on my HD2.
Is there anything planed like this to have for the HD2 ?
Which other solutions would be possible ? How many people are infected and is it only a VOLVO problem ?
Best regards !
Same here. Latest sofware version installed (already two time), now 4.22R. It's unbelievable. A Navigon or Tom Tom appliance, or any BT Handfree stuff of 100 euro's connects and works without any problem, but a 80.000 euro Volvo... I can't figure out why, the phonebook syncs, it dials, but no sound. Nor does it stop radio/cd/tv. Waiting for next upgrade (either BT of Volvo or the whole car?)
Not supported by Volvo yet
Here is a link for the Netherlands, where you can check what phone models are supported by Volvo bluetooth. Currently, the HD2 is not listed.
Dutch:
http://www.volvocars.com/nl/sales-services/sales/Bluetooth/bluetooth/Pages/default.aspx
English:
http://www.volvocars.com/uk/sales-services/sales/volvo-accessories/bluetooth/pages/default.aspx
Solved problem
Hi!
I had some initial problems pairing my HTC hd2 with my S80 from -06.
Now it works fine without any bluetooth updates from Volvo.
The problem I had was that the call was disconnected just as it was connected.
I could make the call but as soon as someone answered, the call was disconnected.
I'm not really sure what did the trick but I tried with the settings in:
Start -> Settings -> Meny -> More -> Bluetooth
Under Advanced there is an option to play system sound on the remote bluetooth device. I have it checked, not sure if that is needed.
So try to change the settings in Start -> Settings -> Meny -> More -> Bluetooth
If I get the time I'll try to write a more detailed guide...
The main thing is that with proper settings it works, without updates.
Douwe Bekius said:
Same here. Latest sofware version installed (already two time), now 4.22R. It's unbelievable. A Navigon or Tom Tom appliance, or any BT Handfree stuff of 100 euro's connects and works without any problem, but a 80.000 euro Volvo... I can't figure out why, the phonebook syncs, it dials, but no sound. Nor does it stop radio/cd/tv. Waiting for next upgrade (either BT of Volvo or the whole car?)
Click to expand...
Click to collapse
I had the same problem with no sound and problems muting the radio. But that was solved. See my other post...
Look at this thread
http://forum.xda-developers.com/showthread.php?t=583570&page=7
Although it does not enable you to sync your phonebook, you can at least call normally; this did the trick for me.
Quote: andy2111
Senior Member Join Date: Dec 2007
Posts: 120
Success!!!
--------------------------------------------------------------------------------
I tried the settings posted on the previous pages and for the first time my HD2 pairs with my Range Rover handsfree.
I didn't find the registry values exactly as in the previous post so here's an updated list of what worked for me:
I downloaded Mobile Registry Editor (freeware from here http://handheld.softpedia.com/get/De...or-10636.shtml
Then I made the following registry changes:
1. Modify the HandsFree plug-in: HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135 mine was 1379)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType DWORD 2
2. Modify the WIDCOMM bluetooth general settings: HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value) delete the existing key value
ii. Change DisableReopenAudio to 0 (default is 1) I didn't have this registry key so I created it with DWORD value 0
3. Reboot device
warnink said:
Hi,
Does anyone have the same problem with his/her Volvo?
Does anyone have a working combination of a HD2 + Volvo?
Any help/direction will be appreciated.
Click to expand...
Click to collapse
I found (on another thread) that just turning off the data connection enables most of the BT and audio-linked functionality... Though mine doesn't seem to update the recent calls list made from the car.
BUT the downside would be losing out on push email or other data services like weather, stocks (who cares!), and things like satnav live services (traffic, etc.) until you re-enable data. I haven't yet tried Tungsten's ideas above - hopefully tomorrow!
NB. which bluetooth version do you have? (In the menu on the sound system) I apparently have the current version and my Volvo dealer said that even an update could either maybe not work/work fine/trash my phone's BT UNLESS Volvo had by then listed my phone as compatible (HD2 currently not listed). Plus I would still be charged £60-70 so I opted not to risk it.
From what I can gather and although bluetooth is a "standard", it maybe to do with using different stacks - HTC apparently doesn't use the Microsoft stacks...
Problem fixed
Everyone...I picked up my HD2 on Thursday, same issue with my 2009 Volvo S80. Connected but no audio picked up or transferred...until today.
Complete the pairing with the vehicle.
Then
Go into the "OTHER SETTINGS" (Located toward the bottom of the Main Settings Section)
Under Other Settings is "CAR KIT"
Make sure to have a check box in both options. "Navi" & "Automatically transfer to Car Kit"
Save.
Your set..works like a charm.
Just curious
porscheman911 said:
Everyone...I picked up my HD2 on Thursday, same issue with my 2009 Volvo S80. Connected but no audio picked up or transferred...until today.
Complete the pairing with the vehicle.
Then
Go into the "OTHER SETTINGS" (Located toward the bottom of the Main Settings Section)
Under Other Settings is "CAR KIT"
Make sure to have a check box in both options. "Navi" & "Automatically transfer to Car Kit"
Save.
Your set..works like a charm.
Click to expand...
Click to collapse
Are you also using any data connection at the same time? It seems that when I leave push-mail on, that this does not do the trick for me.
ciao a tutti sono nuovo ho un htc hd2 leo vorrei un aiuto sul bluethooh non riesco a sentire l'audio sul mio auricolare,cosa devo fare?prima avevo un htc hd e funzionava perfettamente aspetto un aiuto grazie
Just got the watch and apart from the belt I really like it. The one thing that I can't get it to do is to show notification when someone is calling my phone... it simply doesn't do anything. Everything else works perfectly (gmail, whatsapp notifications etc). No custom image or anything - just updated OTA after I powered it on. I don't know if call notifications worked before.
Any clues?
Thanks.
stargatesg1 said:
Just got the watch and apart from the belt I really like it. The one thing that I can't get it to do is to show notification when someone is calling my phone... it simply doesn't do anything. Everything else works perfectly (gmail, whatsapp notifications etc). No custom image or anything - just updated OTA after I powered it on. I don't know if call notifications worked before.
Any clues?
Thanks.
Click to expand...
Click to collapse
Under the bluetooth settings in the watch have you enabled 'play phone audio on watch'?
I only have the options to rename or unpair under LG 7993.
stargatesg1 said:
I only have the options to rename or unpair under LG 7993.
Click to expand...
Click to collapse
You may have to disable numbersync or the 'watch shares number with phone' option in order for the 'play audio on watch' option to appear in the bluetooth settings. On my watch it's under settings> cellular> advanced>'watch shares number with phone '. If I turn this off, then I see the audio option in the bluetooth settings. There was a thread about this in the AC forums. Maybe it will help..... http://forums.androidcentral.com/showthread.php?t=664344
Both call and text are off in watch shares number with phone. But this setting in bluetooth would not make all audio from the phone go through the watch just like a bluetooth headset? Doesn't sound good - forget the pun
stargatesg1 said:
Both call and text are off in watch shares number with phone. But this setting in bluetooth would not make all audio from the phone go through the watch just like a bluetooth headset? Doesn't sound good - forget the pun
Click to expand...
Click to collapse
It doesn't make every sound go through the watch but it does need to be enabled for calls to ring through the watch. No luck with the option appearing? No way to disable numbering? (If it's enabled) The linked thread didn't help?
This is the way mine looks.....
Hah! Found it under settings - bluetooth. I was looking under cellular.
Thank you!
stargatesg1 said:
Hah! Found it under settings - bluetooth. I was looking under cellular.
Thank you!
Click to expand...
Click to collapse
No problem. Calls coming through now?
Yep! And media is on the phone exactly as it should be. Thanks.
stargatesg1 said:
Yep! And media is on the phone exactly as it should be. Thanks.
Click to expand...
Click to collapse
No problem.
Hello,
I was searching for this options also, with setups in this thread - now my watch see when somebody is calling, but when I answer it sound is directed to the watch... also it disconnects my other bluetooth headphone device... any other way so that LG will notify about call connection and just that?
Thanks for reply...
When I enable 'play phone audio on watch' my car bluetooth is not able to connect to the phone and bluetooth in-ear handsfree has the same problem. Looking at the BT icon on the phone it seems that the watch is acting as a hands-free and the phone does not allow to connect more of them. But the choice between having call notification on the watch and having car handsfree working is a hard one. Anyway able to have both of them simultaneously?
rastik said:
When I enable 'play phone audio on watch' my car bluetooth is not able to connect to the phone and bluetooth in-ear handsfree has the same problem. Looking at the BT icon on the phone it seems that the watch is acting as a hands-free and the phone does not allow to connect more of them. But the choice between having call notification on the watch and having car handsfree working is a hard one. Anyway able to have both of them simultaneously?
Click to expand...
Click to collapse
If you place a SIM card in the watch, then it is possible. Of course, the SIM card in the watch must have the same number as the one in your phone. Please note that not a provider offer this so-called MultiSIM option.
Thank you for the explanation. Is 'play phone audio on watch' working the same on Wear 1.5? I'm using AW2.0 and I haven't tried it on original firmware before upgrade.
Small update: on AW2.0 DP4 call notification works even without setting 'play phone audio on watch', active BT connection is enough. So it works and does not collide with hands-free.
Its pity that there is no way to pair AW 2.0 preview watch with iPhone