Anyone has an idea how to solve this?
i have installed the new RUU_Prodigy_2170706_21707106_20710_QTEK_FRA_Ship ROM on my qteck9100 and all went fine, all works perfectly execpt WIFI
Now each time i want to connect to my wifi network its goes on a neverending seraching, trying to connect end nothing.
I tryed wiht the WAP security on, without any security , without an mac adress filter but no way to connect.
i tryed also to go back to ROM RUU_Prodigy_2080702_102_11310_QTEK_FRA_Test that worked perfectly but i have an error message saying that the rom is not compatible with the device..
suggestions are welcome
thamks
sorry cant help too much, im in the same boat, tryed two different roms now, but no go
finds the network, asks if you want to connect, then after a few mins it stops trying to connect!
Also in the available networks list, they stay available even tho some of them i passed a mile or so ago in my car!
I finally could install RUU_Wizard_1050412_WWE_101_11210_WWE ROM and with the DJVW HTC Wizard Optimizer the Wifi wrok perfectly
with the old 2.08 test and the Optimizer,the wifi connection was fine.
Maybe with this last ROm 2,17 the Optimizer don't work ..
im running Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe.html
but still not working for me, whats this, DJVW HTC Wizard Optimizer ? cheers
DJVW HTC Wizard Optimizer installed and still the same, ohwell,
I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?
same issue for me ...
slurp said:
I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?
Click to expand...
Click to collapse
i had the k-jam ontop of the router, and nothing
I tryed the WIFI connection in a public place with a provider called
"monzoon" and its worked fine.
As this acces is a 802.11b i start really to belive that "Wizard optimizer" do not work with the new ROM
At home with my Belkin Pre-N router that works only on mode "G" and "B+G" i still have no connection.
There is no change if i change performance setting and by the way with the piblic network i was on "best battery" and not on "best performance"
hi i got my wing yesterday and i cant seem to get this wifi to work i have my network unsecured ..my wing finds it but when i try to connect it times out then gos unavailable then back to available ...no matter what i do it work connect ..any ideas ... cause if i cant fix it ill be sendin it back while i still can...
screwstone said:
hi i got my wing yesterday and i cant seem to get this wifi to work i have my network unsecured ..my wing finds it but when i try to connect it times out then gos unavailable then back to available ...no matter what i do it work connect ..any ideas ... cause if i cant fix it ill be sendin it back while i still can...
Click to expand...
Click to collapse
Unfortunately, I've always had the same problem with my secured network with both my MDA(HTC WIZARD) and my Wing(HTC Herald). Do you have Dlink router, by any chance?
Originally change the wifi settings, removing 4X mode and placing the TX rate to 11mb and not 22mb fixed the problem but the problem is back (but so is the 22mbps apparently..)
Just changed it back to 11mbps and it worked!!!
i have my network runnin off a linksys wireless b router model befw1154..and yea i tried changin them settins and still nothing like i said it still sees it and tries to connect but wont ....
I've got a similar problem. Secured network at home (Dlink 614+), won't connect. It'll go from connecting to unavailable, then available again. I've narrowed it down to the router (I think). Every time I change a setting on the router, it reboots itself. Directly after the reboot, I can connect with my wing and stay connected. As soon as I disconnect and try to reconnect, it won't do it. So my only fix so far is to reboot the router when I get home and keep the wifi on.
One time, I went out to get a haircut and connected to a wifi network around there, then as I came home, it was able to connect. Maybe it has to do with the wing "refreshing" a cache or something.
I haven't tried the 11mbps thing posted above. I'll have to try it when I get home. Hopefully that'll fix it, because constant rebooting of the router or finding another wifi spot isn't a real solution for me. I hope the wing will get a software upgrade or something that'll make it more compatible with more routers.
I have the same 614+, so it might work for you. I mean, it still happens but not as much as it did before.
I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!
Hi all - Just got a diamond 2 from ebay . I can get everything connected no problems through wifi however with the wifi off nothing connects phone works sms works sim is showing an HSDPA connection and o2 has changed to 3g o2 . Is there any settings i have missed to connect to the internet any other way except wifi.
Tried so far all report connection error.
Weather widget
Live messenger
data connection - won't turn on
Phone is on o2 in UK.
Other thing to mention is i left this sim in the phone overnight as my old number was being transferred to it have tried a soft reset as well.
Any help or suggestions would be appreciated.
Finally managed to find some settings hidden under about 15 different layers to change the gprs settings and connect to everything else. No idea where they are now so i'm afraid i can't help future users coming into this post but if i reflash with a different rom no doubt i will be tearing my hair out to enter them again and when i find them this time i will write them down.
(I'm doing this from memory so forgive me if I have left something out.)
Generally if you go to Settings\Connections\Connections and I believe you go to the advanced? tab, you should see 2 connections settings, set both to internet.
Thanks for the reply Bruce. Couldn't find it in the ROM i'm using so instead i found another way . Entered here incase anyone else comes up with the same problem.
1: goto settings>wireless controls - this also works if you go to weather and let it try to update over data.
2: click data connection - it will try to connect and fail.
3: on the failure screen click settings
4: on the settings tab adjust the internet settings for your provider in my case o2 active settings
5: click advanced and from there you can edit the details as you wish..
Hope that helps someone else out there and again thanks for the reply Bruce
Hi there.
I have WiFi at my Home. Whenever i get back home after work i have to manually connect my WiFi. Each time i have to go to Settings, then Uncheck the WiFi mark and then recheck that and then my WiFi connects, dont know why its happening.
Any suggestions?
Delete every WiFi point and reboot .
Make new points .
jje
raziiqdev said:
Hi there.
I have WiFi at my Home. Whenever i get back home after work i have to manually connect my WiFi. Each time i have to go to Settings, then Uncheck the WiFi mark and then recheck that and then my WiFi connects, dont know why its happening.
Any suggestions?
Click to expand...
Click to collapse
i think it is somthing with the ROM ver, since i downgrade to JPJPG i am having the same problem, you can install all kind of 3rd party that will search for WiFi every xx minutes, personaly i think it is neccesary, i do agree it is annoying.
my ROM is original, i just rooted my SGS thats it, never used Custom ROM