I just got a pair of Jabra BT8010 for my Tilt and was looking forward to enjoying them but they won't play music for me. The Jabra BT8010 has a regular BT headset that works like any other BT set but it also has a cable you can attach and make it into a stereo headset with another ear bud. You press a mode button to turn on the stereo/music function.
However, the music function of the headset is on and I can control the media player but either the sound plays for about 10 seconds and goes out or no sound comes through the headset at all. Jabra & ATT were no help. HTC claimed that phone doesn't work with this BT set because the device must have a dedicated BT music headset. That sounded shady to me so I decided to check several forums and noticed some people use the same model. I've contacted these people but no reply yet. Anyone have advice on what to do for a fix?
I had the same problem at first. Using the menu on the headset itself, I was able to reset it to the factory settings, repair it with my phone, and it worked just fine after that.
Hope that helps you out.
Related
This may have been talked about before but my search didnt come up with anything so i thought i'd ask
i have a sony bluetooth headset and when i make and recieve calls it works fine
when i listen to music it comes out of the speaker on the phone
i guess this is a known 'problem' .. is there a setting somewhere i need to set
thanks in advance guys
To get standard audio thru the headset it has to support Wireless Stereo otherwise it will only work as a voice command/phone unit.
If you have a BT headset such as the Promate PM-2006 (which looks like a small pair of headphones with a mike) when paired to the phone it will show two profiles, 'Hands Free' and 'Wireless Stereo'
To set up audio thru this headset you go to 'Settings' 'Bluetooth' 'Devices', hold the stylus on the paired device you want to use and select 'Set as Wireless Stereo from the small drop down menu.
yeah i have both wireless stereo AND hands free selected .. thats what was confusing
Just to be sure...
You need to select both profiles when you first pair it.
But every time you want to listen to audio through it you need to go and select it for 'Wireless Stereo'. The phone then connects to the headset for that purpose.
Hope that's clear.
cheers .. i'll take a look at that ..
seems a bit crap tho eh??
Same on all windows devices, you have to tell them to play the audio through BT whereas a phone is listening for a headset.
True, a quick connect button would be much more help and I am sure if you search around you can find one.
ive got a paitr of motorola ht820's they just automatically pair up and sort out the myusic and calls when i turn bluetooth on however, they dont play nice when wifi is turned on
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
Not having experience of this unit this may be down to the individual headset and I hope some others will come in with experience of this.
Does the headset support both Headset and Wireless Stereo profile?
If it does not, the function may not be supported. I use a Promate PM-2600 and it supports both and when I have selected Wireless Stereo (this has to be done manually!) it works without problem when answering a call and passing back to music or video play.
Hope someone with information on this particular unit gets back to you.
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Click to expand...
Click to collapse
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
jazzman-t said:
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
Click to expand...
Click to collapse
I'm facing the same issue as well! Tried numerous hard resets and fixes you would have thought imaginable! Unfortunately the problem is still existent and it is freaking irritating when you have to press the play button to repair the headset. Worst still - when the music starts playing through the speaker after a call, everyone starts to look at you like you are some moron.
I do really hope there is a way to resolve the problem. Any new fixes i can try???
Senior members? Any help?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
I have this exact same problem on my Sony Ericsson HBH-DS220.
The bluetooth will disconnect after hanging up a phone call. I don't press anything on the headset, I wait for the other person to hang up. When it hangs up, it immediately disconnects the bluetooth headset.
Annoying!
Probably a problem with the bluetooth stack then. The stack is already known to be very buggy and have problems with lots of Bluetooth devices. Luckily, unlike the graphics card, it looks like HTC will be releasing a fixed Bluetooth stack at some point in the future. In the mean time, you are probably out of luck.
Bluetooth connection problem also with Tilt
I have a Plantronics 510 BT earpiece that for no discernible reason is connected one minute and gone the next too. I haven't been able to determine any combination of actions, such as ending a call as the culprit. I always have to make the connection manually between the earpiece and the Tilt also - it never links automatically when I turn the earpiece on like it did with my Treo 650. I've had this Tilt for 3 days and this is probably going to be a show stopper and make me return it to at&t before the eval period in spite of everything else good about the phone. I also have a Plantronics Pulsar 590 stereo headset that I haven't experimented enough with yet to know if the connection is as flaky. But the bottom line is - I'll be damned if I'm going to try to fiddle with establishing a connection and all the steps it can take while I'm driving down the road!
HTC CLUB
I FOUND THIS FILE AT HTC CLUB... Dont know if it will fix your problem or not .. but its for some BLUETOOTH BUG ... This File is For TYTN2...
Description From HTC CLUB:
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Hope This Helps
Got a set of Motorola's S9 BT headphones for Xmas. It paired up just fine with with my Titan (P4000). Music playback works great, and the phone responds to the controls on the headset (volume up/down, play/pause, etc.) While stereo playback is great, it doesn't seem to operate at all on a call. It rings when a call comes in, and when I press to answer, all I get is a slight crackle of static with no inbound/outbound audio. The call seems to stay connected, but I'm unsure if there's something wrong with the BT on my phone or if it's a defective headset, since I don't own another BT headset to test it out with.
Are there any known Bluetooth issues with Telus' P4000 with their Windows 6.1 update? Or did I get a bum headset, and should I exchange it?
Thanks in advance!
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (