While updating my (o2 mini s-K-jam-9100) with Aku rom, my ppc's battery get out of charge and updating interrupted.
I tried to power on the device but no answer. I put it to charge and connect to my computer , charging led doesn't light also I could not get into bootloader mode
Try charge it for a few hours with your original wall charger, or look for another (fully charged) battery from someone.
Then try to get it in bootloader mode, if that doesnt work I think you have a really big problem pal.
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
upgrade rom MrClean_RUU_WIZARD_2240001a_AKU23_WWE battery %25 bootloader mode impossible
I have a problem with wizard too. While loading rom error appeared and phone became dead (4 steps error message). I can't enter into bootloader mode. Phone takes ~0.11A and blinks while taking off battery. Battery changing and charging didn't help. Resets, manual bootloader mode, waiting for phone to boot... nothing. Totally no reaction. Any suggestion what's going on?
cold-reset to end main battery i wonder?
HELP! ya yardım ya hiçmi anlayan bilen yok yaa?
molski said:
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
Click to expand...
Click to collapse
LOL no kidding...the app should really make you check a box or something acknowledging that your battery is fully charged before you can continue. And while they're at it, put a latch on the USB port that won't let the cable go until the update is done. If I ever run into one of those people that yank the cord in the middle of an update and then whine about it, I'll kick his ass. I wonder if they set their clock's alarm, then yank the plug out of the wall and complain the next morning when they're late for work? :lol:
ne diyorlar biri türkçe açıkmala yapsın
Hi everyone
So I have the battery problem-it`s not charging!
at start it showed all the time that it`s charging-eaven when it was unplugged!
so I searched and disabled the usb charging,through registry.
But then started another problem-it shows that it`s connected to wallcharger and so,and it shows it`s charging,and how full the battery is...BUT!
it`s all fake! it shows 100% but after few mins dies!It only charges and holds the power normaly only when i charge it through differient methods-with just ac adapter(just two wires-my brothers electrician so he knews how to..).
but it`s not the batterys fault-I just bought a new one.
So-what could be the problem,any ideas?
thanks and have a nice day
P.S.
I got it used.its G4
the info,that i found in it was:
ROM version:2.17.7.2 WWE
Radio version:02.07.10
So do you think that rom updeite could fix it?
I'm betting on hardware problem; maybe charging IC's or something but it's easier to just try a Hard-reset or flash a new ROM to see if it goes away. Only problem is battery must be over 50% to complete the upgrading
so which rom could be the best to upgrade to?
First get the battery fully charged somehow,it won't complete the rom flash if its below 50%,then download the official stock rom and flash it.
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
First of all be sure that you haven't flashed a G4 ROM in a G3 device (or vice-versa) which would have made it a brick.
In case you haven't screwed up the bootloaders then look for the battery jump start thread that teaches how to revive a dead battery
good luck
ianestradalives said:
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
Click to expand...
Click to collapse
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
i've the same problem!!! i leave the phone attached the whole night to the charger...but it was in bootmode, so it doesn't charge!!! it hasn't the power to flash my phone...when it arrives to the 85% (when the phone write into the flash memory) it reboots.....what must i do? i tried to jump start...with a 12v adapter...but nothing....
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
F0ll3 said:
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
Click to expand...
Click to collapse
No need to buy a battery i say you use a External Battery Charger. Because even buying it would be cheaper then the battery itself and would help you in future too. I hope i helped. TC
Thanks
xda2_haseeb said:
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
No Problem but now remember if you find ppl with same problem (on the forum) dont forget to guide them to this Thread. And no need for the thanks. TC
zabardast_1 said:
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
Click to expand...
Click to collapse
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
scousemartin said:
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
Click to expand...
Click to collapse
Dude, sorry to disappoint you, but his advice was correct. My phone is now up and running, and it has NBD 9.2. The advice he has given is correct. It works.
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
zabardast_1 said:
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
Click to expand...
Click to collapse
In bootloader screen. If you were flashing a rom and it failed, you usually end up in the tri-color (aka "Bootloader") screen. Do what haseeb said (like I did) and plug your wizard to a wall charger and wait for a few minutes. When I plugged mine, it immediately lit up. Good hunting!
scousemartin said:
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
Click to expand...
Click to collapse
Nope. I'm sure the battery was drained. The other night, my phone was in the bootloader screen THE WHOLE NIGHT. And yesterday, I tried reflashing, but it won't start anymore because of - obviously - no battery power.
IF you don't believe me, fail a flash and drain the battery. Then plug it into the wall. It really works.
scousemartin
YUP! thats very true.
The question here is 'How did he charge in Bootloaders with a wall charger',it has to have a working OS on it to start the charging circuit,which isn't present while in Bootloaders.
Flashing is a separate issue.
it will light up as it has power but it WONT CHARGE IT. You were LUCKY that's all and you had power in your battery. You just never realised it. If you want to prove us wrong let the battery go low and then try your revival attempt again. I guarantee you will be buying another battery or charging it somewhere else
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
scousemartin said:
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
Click to expand...
Click to collapse
It did get sorted. But I am really sure about the battery thing. I guess this is an anomaly. Besides, the XDA is different from a Wizard.
lol the xda mini-s is exactly the same device a 8125 is, they re both wizards
hey guys, i was uploading wm5 back to my 9100, when at 90% it restarted, and in the installation it was showing me that my battery is empty, so i took out the battery, and placed it back and tried to put it in bootloader, but there was no hope, so i connected it to the charger, it was charging through the night and once or twice it turned on for 10sec`s ( itself) in bootloader...and now i took the phone off the charger and it has no sign of life, im trying to put it somehow in bootloader, but its not working...it looks like he`s dead...is there anyway that i can put it in bootloader!?!??thanks in advance!!!and even if i put it on USB through the computer it is not showing that its charging, and the same thing is happening when i put it on the charger, the orange light is not on...
Which is your device,G3 or G4 ?.If its a G3,the battery is dead and it won't charge in Bootloaders,It'll only charge with a wall charger,capable of 1amp out put or you may have to 'Jump Start' it and then it'll start to charge.
But,if its a G4 and if you had applied HardSPL to upgrade to wm6,it was essential to remove HardSPL and revert back to original official IPL/SPL and then reflash the wm5,otherwise the phone will be 'Bricked'
thanks for replying on my post,
i think that my my device is G4, probably, because the wm5 that i was installing it was Wizard_Love_2.26.10.2_WWE_Novii_CF2 for G4...
anyway how can i 'Jump start' my device?
thanks in advance
hey i was flashig the rom from tmobile and during the flashing the phone stoped at 90 percent and after that when you go to turn on the phone the screen with the red green blue white bars come up is there away to fix it
azek1988 said:
hey i was flashig the rom from tmobile and during the flashing the phone stoped at 90 percent and after that when you go to turn on the phone the screen with the red green blue white bars come up is there away to fix it
Click to expand...
Click to collapse
Did You tried to start from "My Wizard stuck at RGB Screen" section of flashing tutorial? Which phone did you broke?
i have a mda
azek1988 said:
i have a mda
Click to expand...
Click to collapse
Which IPL/SPL? G4 or G3 device?
the phones a g3
If you have not CID unlocked your G3, just download the official carrier ROM for you device and flash it, then you will get a restored Wizard.
i was flashing the offical rom that you can download the tmobile website and but today i took the phone to a cell repair place and told theguy that i was flashing the phone from tnt wm6.1 that was missing a few files to offical tmobile and the phone shut off at 90% and he pluged the phone in and it turned on to the red green blue screen and hey told me that the phone is not bricked thats made me happy i love this phone then he put my battery in another mda that worked and checked the battery and it was 5% charged and told me to charge the phone but i told him that i ready tired to charge the phone but the light that comes to tell its charging doesnt come on then he told to go home and order a external battery charger on the internet and charge the battery and try to flash the phone again
hey everyone got the external battery charger in the mail and charged the battery and still no luck at flashing the tmobile rom then i decide to try and buy a new battery and i went a bought a new battery and put the battery on the external battery charger and then let it fullly charge and then i tried to flash and the rom successfully downloaded now my mda is back and running like a champ