or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416
Hi All
I recently lost my ringtone and found a solution on here, so all is fine.....EXCEPT when the phone rings, the ringtone disappears when the scroll wheel (if that's what it's called) is moved.
Has anyone else come across this problem and if so found a fix???
The phone carries on ringing silently if I move the wheel, it's just the sound that disappears and that's obviously not very good if it's in my pocket!!
I've tried pressing all the other buttons when it's ringing to see if they make the sound disappear but they don't, it's only the wheel
Any one got any ideas????
Thanks
That's not a bug.
That's a feature...
My TyTN1 did that.
My P3600 did that.
My TyTN2 Does that.
It's the only way of making the phone go QUIET without canceling the call.
Quite usefull actually....
Honestly!!??
It's a feature??
How do I turn it off????
I like that feature very much, too. When someone calls and I don't want to talk to them I just hit the scroll wheel to silence the call but let it continue ringing for them. That way they don't know I'm ignoring them. I can plausibly be out of range of my phone or some other excuse. If you press the end key or hit "ignore" on the phone screen it sends the call immediately to voicemail and the person on the other line can tell they've been actively ignored...
I don't know if it's possible to turn it off.
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
livefastdiefun87 said:
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
Click to expand...
Click to collapse
The beginning of every sad story I've heard about screen cracks and phone damage, has always begun with , Well the phone was in my pocket and..............
When I pull my phone from it's padded holster I always look at the caller id first and do not wish to disturb other people while I decide. I appreciate the feature
I'm guessing it's a feature that can't be turned off then
This is rediculous.. but apparently winmo doesnt allow you to play music while the phone is set to vibrate...
Is there any way I can get around this?
I dont want my phone ringing in the middle of class, and I dont want to risk forgetting to switch my phone back into vibrate after i finish listening to music.
In all honesty i dont see how this will be possible. I understand your issue however the X1 is effectively cutting off all sound from the unit, pretty much like hitting MUTE on your desktop/laptop master. I could understand if third party software could get around this but i just tested out youtube player for example and good as gold it cut the sound right off whilst on vibrate.
I dont think there will be a solution for this to be honest...i hope im proven wrong though, sure there will be a genius on here with an answer
Maybe I really am just asking for too much. But all of my previous feature phones allowed playback through headphones in vibrate mode. And if no headphones were plugged in, the device asked if I wanted to continue and playback music through the speakers anyway (while keeping vibrate mode active).
i may be a bit confused about your question.
im not sure but your phone shouldnt ring on your phone outlet speaker with headset plugged in.
i guess you can make a null ring tone....
I noticed this the other day in class also. I put my phone on silent and went to the music player and it wouldn’t give any sound to the headphone, the only way was to put the volume back up but this meaning if any one text or rang your phone the class would all hear.
I hope there is a solution for this
one fix is in the volume setting ( the one that pops up when you press volume up or down), turn the phone setting all the way down... you wont hear your phone ring but you can still play music.
another way is to just set the phone ring setting to just vibrate mode only. (haven tried it tho yet as no need for me too but just trying to offer solutions). lots of options in the setting, sound notification menu.
it might not be a one touch solution but i think it can be set up to the way you want it too.
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Wait, can't you put the ringer on vibrate, but keep the system sound on? That's what I would do. I use the touch audio control so when I use the volume rocker I can switch between ringer and sytem.
Shadowdh said:
I dont have a solution but I gotta ask... listening to music in class???? At the risk of sounding old fogeyish (I cant believe the spell checker let that word through) shouldnt you be listening to the teacher/lecturer?
Click to expand...
Click to collapse
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Nippero said:
No no you missed the point.
I'd listen to music on the way to school. Then I'd turn off the bluetooth once i was done listening. Heres is the problem, once i turned off the bluetooth headset i use, the phone returns to normal sound mode, and is free to ring during class if I forget to switch it back to vibrate.
And I guess I could just manually switch everything to vibrate, but on the weekends I like being able to hear my phone ring.
I'll just have to change the phone to and from vibrate mode when i listen to music I guess...
Click to expand...
Click to collapse
Oh I did indeed misunderstand... apologies...
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Shadowdh, I was being a bit vague/mixed up, so the fault is mine. No need for apologies
Click to expand...
Click to collapse
dude you haven't even tried it and yet you already commented on it .heh
the answer is NO it doesn't set to vibrate not just yet. if you click you're speaker icon on your top left screen(almost) it will pop you up a volume panel which consist of left: the system sound and the right: the phone speaker sound consists of six levels each top most being the highest and bottom being 0%. then below a setting of 3 radio buttons for ON, VIBRATE, and OFF.
now setting the right slider to bottom most and setting the left slider on top most gives you full system sound but 0% phone speaker sound. the radio button is autonatically still at ON and not VIBRATE by then. that is your only choice so far.
another problem afterwhich is, you won't hear any phone ring whenever someone calls you up even through your earpiece. that's just darn. I guess it's just a winmo device problem aprt from your previous phones. SEs I guess.
things SE didn't consider to take a look coz SE people lifestyles are music, camera,and or business and or both.
one more thing, when you turn your volume maxed up. you phone will ring even when the earpiece is plug. there's just no setting to turn it off. I mean for silent users who lstens to music by earphones, most of the time they like it that the speakers are just off and every sound just goes by the earphones. There is simply no setting for that.
in previous model of SE's whenever you plug an earpiece and the phone recognizes it. the phone automatically turns to headphone mode, which utilizes only the earphone as the source of sound and nothing else UNLESS specified in the settings. there has been an issue that users forget to unplug their earpieces that they misses x number of calls the whole night while their phone vibrate silently on their bags or table with their earpieces plug. That is the reaon SEs newer models after k750i I think coz I got a k750 and a w800i which is consecutively released. the w800i and so forth features a earphone mode setting but their phone speakers still rings as well as sounds when an sms goes in even if the earpieces are plugged, without a setting to disable it.
It just the way it is, and some people still need that feature. Like me. I don't want people to hear my phone ringing in public places like a market, street at dawn or related areas. Whenever I wanted to listen to music when someone calls, send an sms, the phone just simply sounds off, publicly.
Another comment/workaround a read is a null tone. Might work, but you have to manually set a null tone for calls, as well as for SMS. without any automation like a uh NULL profile perhaps.
Nippero said:
Does setting ring volume to 0% make the phone vibrate?
Cause not hearing any ringing or getting any vibrating might be just as bad XD
Click to expand...
Click to collapse
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
this is like saying i wanna close my eyes and still be able to see something.
As a more lateral solution, have you tried using something like SPB Phone Suite to set either manual or time based profiles?
I'm thinking you could have something like a travelling profile with bluetooth on and sound on and a school one with the phone/system on vibrate and bluetooth off. You could then either change manually with two clicks of the home screen or have it change automatically dependant upon time.
ill always use flightmode! easy and safe...
skycamefalling said:
I've set my phone to always ring AND vibrate on incoming calls (so I recognize incoming calls even if the music in my living room is very loud ). So if I decrease the ring volume to 0% it does vibrate.
Click to expand...
Click to collapse
i do it this way too when i´m in school^^
skycamefalling said:
Why don't you set the ring volume to 0% (don't press silent or vibrate, just set the ring volume down) and leave the system volume where you want it?
Works without problems here.
Click to expand...
Click to collapse
the problem I encounter here is that phone calls are muted and it's great, but it will still ring through the speaker if an sms is received
any solutions?
this makes it impossible to listen to music at quieter (and most usually boring) places!
Possible Solution
I'm not sure if this works on the ROM you're using, but I'm using Touch-IT 3.5 and it allows me to automatically put the phone on vibrate during appointments.
You could set your classes as appointments and not need to worry about it from then on.
Hey folks any idea on this?
I've had my Diamond for just over 12 months until now ring tone has worked fine when i get an incoming call but now it's stopped working. I usually have it set to "vibrate then ring" but now it just vibrates, i've tried all the options including just plain and simple "ring" but to no avail. Interestingly when i preview it when i've made a change it plays the ring tone for incoming call fine so the speaker must be ok. I've also changed the ringtone played as well but has the same net result.
any thoughts welcome
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Viffer800 said:
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Click to expand...
Click to collapse
Spot on mate!! Many thanks for that as you say no idea how mine came to be on silent for Ring either. Thanks again
I have a problem with my ringtone that is driving me nuts. When the ringer starts, it is very quiet for maybe a second or two and then suddenly goes to the full ringer volume. I would like it to start at the preset volume level and continie; i.e. get rid of the soft-then-loud and just keep the loud.
For additional background I used ringdroid to make a few ringtones from .mp3s. The original .mp3 and created ringtones created sound perfect played through a media player so it is not the files themselves rather something weird on the phone.
This is one of the last items for me in setting up my new system so please help!
You can't fix that. Its a standard Samsung thing that they do with all devices.. No way as of yet to get around it.
This is terrible! Isn't there a way to remove this setting? This is an Android device after all!
Fret not, my friend.
As there's no solution to the native ringing behavior, here's a workaround to help offset the first low ring by extending the time your phone rings before rolling over into voicemail.
1. On your phone, dial *#61# and click Send.
2. Some information should be displayed: number that the calls are being forwarded to and the delay before the forwarding engages.
3. Write down the number (including +1)
4. Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum
5. Dial *#61# to verify that the new settings are active.
Dialing *#61# as instruction 5 suggests told me that my phone forwards to voicemail after 30 seconds.
I will give this a try. Any explanation for why this works?
Adaptive13 said:
I will give this a try. Any explanation for why this works?
Click to expand...
Click to collapse
Its not that it changes the tone like he said. All this does is make your phone ring for a longer period of time. I think the default is 20 secs.. using the settings above you extend that time by 10 more secs of ringing which helps so you can catch the phone. You still aren't stopping the actual soft first ring.
Exactly. This used to be changeable only via AT&T until I discovered the procedure elsewhere. Helps alot.
Hmm. This is not quite what I was looking for; I want to hear the beginings of my ringtones! Does anyone know the exact time the ringtone is softened? I guess I could use an .mp3 editor and bad nothingness to the beginning...
I downloaded audacity and put some blank space in the front of each one of my ringtones. 2 seconds seems to be the perfect amount of dead time for the ring to come up at full volume. This is actually kind of nice now vecause it gives me two seconds to reject the call before it starts making noise, so if I am in a meeting or something and forget to turn the ringer off (never happens I can dump the call.
Thanks Jack45, worked perfectly!