I got this at SF Planet for $13+shipping. It is well-made. The Athena is a snug fit width-wise but the sides are elastic. The case looks very professional and like it is made for the Athena. My only complaints are it could be a little wider and I would prefer a magnetic closure instead of Velcro.
Here are some pics:
http://picasaweb.google.com/cbhausen/AthenaInKrusell75134/photo#5137659532977009954
Here is SF Planet's order page:
http://www.sfplanet.com/product/75...r_Leather_Case_L_with_Slide_Swivel_Clip.html
So you have to remove from the case to use?
toyfreak said:
I got this at SF Planet for $13+shipping. It is well-made. The Athena is a snug fit width-wise but the sides are elastic. The case looks very professional and like it is made for the Athena. My only complaints are it could be a little wider and I would prefer a magnetic closure instead of Velcro.
Here are some pics:
http://picasaweb.google.com/cbhausen/AthenaInKrusell75134/photo#5137659532977009954
Here is SF Planet's order page:
http://www.sfplanet.com/product/75...r_Leather_Case_L_with_Slide_Swivel_Clip.html
Click to expand...
Click to collapse
wgary said:
So you have to remove from the case to use?
Click to expand...
Click to collapse
Yes, unless you have x-ray vision
I wish someone would make a belt clip case with holes for the screen and buttons so we could use the Athena without taking it out. The screen could face outward (away from the body) and be protected with a flip cover.
I filled out the form on Vaja's web site with this suggestion. They should make an Athena case which has a flip cover like their iPhone cases.
I carry my device bare without keyboard, and this looks like an excellent design. The price looks good too.
It looks just a little little too tight. Is it easy to put the unit in and out? I also prefer to leave the pouch hanging on my waist while the unit is removed for use. The current design seems to be such that the whole pouch with the device comes off the waist.
Is there any option to leave the secured on the waist when the device is removed? I think it is a hassle, not knowing what to do and where to place the empty pouch when the device is being used.
Search ebay for "HTC X7500 leather" and/or "HTC X7501 Leather".
There's plenty of great cases.
looks nice, but no belt clip:
http://cgi.ebay.com/FITFOR-HTC-ADVA...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
This one has belt clip:
http://cgi.ebay.com/New-Genuine-Lea...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Many people here have had experience with the 2nd case you list. The clip breaks in 1-2 days, and on mine the post (that the clip attaches to) came unglued on the 3rd day. If I hadn't noticed it before I wore it again, the whole thing would have dropped to the ground as the clip & post stayed on my belt. Mine went right in the trash because trying to get a refund would have eaten up the refund since they require that you send the case back. If I got a replacement case I would have immediately sold it (not trusting to use it anymore), costing money to list it and I probably would have had to undercut the other cases listed to ensure a sale, costing money again...
Do not buy it! Many others here will agree. You'll save money by buying a decent (but more expensive) case first, that will last you for years. Forget about the cheap ebay cases.
How do you guys keep the buttons from getting pressed in the tight cases?
I have the screen/lock on but after a call somes in the buttons still get pressed.
any ideas?
G
eaglesteve said:
I carry my device bare without keyboard, and this looks like an excellent design. The price looks good too.
It looks just a little little too tight. Is it easy to put the unit in and out? I also prefer to leave the pouch hanging on my waist while the unit is removed for use. The current design seems to be such that the whole pouch with the device comes off the waist.
Is there any option to leave the secured on the waist when the device is removed? I think it is a hassle, not knowing what to do and where to place the empty pouch when the device is being used.
Click to expand...
Click to collapse
The case could be a little wider but it is elastic on the sides and expands to fit. I put my X7501 in one corner first (slightly diagonally) and push it to one side to get the other corner started. Once both corners are in it is not difficult to push all the way in. There is plenty of room to grasp the top corners of the unit to pull it out.
The pouch stays on my waist (attached to belt) when I am using the unit. I have to squeeze the belt clip to take the pouch off clip and all or push down on the release button on the clip to take the pouch off but leave the clip on my belt.
This is not a "quick draw" case. One does have to be deliberate putting the Athena in. Taking it out is easier, especially when the case stays on the belt.
Also, the corners of the Athena are not protected if the case is dropped with the Athena inside. I look at this case as a good balance between cost and functionality. My quest for the "perfect" case continues...
Yes, indeed there is no pouch that meets my requirements yet.
Another of my requirement is that when I sir down with the pouch on my front hip, it should not cause discomfort to my body. This means it can't be made of hard leather, and the belt loop should be made of elastic material.
Got it.
Pro:
- excellent quality;
- fits the Athena almost to the millimeter;
- holds miniSD cards quite nicely;
- belt-clip much better, IMHO, than previous "rotary" ones. Besides, it can be removed without having the pod-thing it attaches to sticking out and taking up room for nothing.
Cons:
- big and bulky;
- has to be "worked" a bit to close once the Athena's inside. Now ok but after about two-weeks of "massaging";
All in all a great "long-trip" type case IMHO, but no good for day to day use, especially if you don't care about the keyboard all that much.
Krusell 75134 not available any longer?
Toyfreak,
Thanks for posting. I like the case, but the problem is that Krusell does not make it any longer. Even their web site does not list the 75134 model. Do you remember for what device it was originally listed. Like IPAQ model XX or so? Then I could try to find a similar Krusell model. I like the tight fit. Searched a lot and even went to a couple stores, I find them all too bulky.
Thanks a lot.
bengl said:
Toyfreak,
Thanks for posting. I like the case, but the problem is that Krusell does not make it any longer. Even their web site does not list the 75134 model. Do you remember for what device it was originally listed. Like IPAQ model XX or so? Then I could try to find a similar Krusell model. I like the tight fit. Searched a lot and even went to a couple stores, I find them all too bulky.
Thanks a lot.
Click to expand...
Click to collapse
Krusell discontinued the 75134 a long time ago but SF Planet had some left when I bought mine. Try the link in post #1 of this thread and see if they still have them.
EDIT: I just tried the link and the page is gone... I'm still looking for the perfect case and I will share any finds I make. It might be worth a call anyway.
toyfreak,
Thanks for checking. SFplanet did not have it any longer on their web but I will give them a call to find out what other case might have a similar size. Would it be too much to ask if you can take the inside measurements of the case and post it?
Thanks
Ben
bengl said:
toyfreak,
Thanks for checking. SFplanet did not have it any longer on their web but I will give them a call to find out what other case might have a similar size. Would it be too much to ask if you can take the inside measurements of the case and post it?
Thanks
Ben
Click to expand...
Click to collapse
Apx. 130x88x28mm inside but the elastic on the sides allows it to expand to fit the width of the Athena (see pictures in first post)
toyfreak,
Thank you very much. With the measurements I can continue my hunt. I will post any findings under Athena accessories.
You need search no farther than http://forum.xda-developers.com/forumdisplay.php?f=351
This is the only case I know of designed for the Advantage that has a secure belt clip. There is another case available there, Series 270, that is slightly smaller to hold the device without the HTC case on it.
As far as I am concerned, there is nothing else available to match it.
Brad M
i just ordered it from sf, its changed numbers , but still works its 75 something else just not 7534 i ordered it works great
found it here it is http://www.sfplanet.com/product/75170/Krusell_75170_Universal_Holster_M_with_Slide_Swivel_Clip.html i ordered it got it right here works great
Krussel case
Hi folks,
Just got one here, quick delivery. fits well, but case is very stiff new, will soften up im sure.
Jay
http://www.fonejuice.co.uk/products...rusell+Pictor+PDA+Pouch+Large+94117+&x=26&y=8
This doesn't look near as nice as the Nutshell case(if you're not familair, read in this forum, there's a thread somewhere with links). The clip on the nutshell case is pretty much immune to wearing out. Downside is it can cost from $60 to over $100 and can take up to 2 weeks to ship. Worth every penny and minute in my book.
Related
I believed lots of people are looking for a belt clip case for your U1000/Ameo, and not much can be found in the market.
After buying Lowepro SlipLock™ Pouch 20, still find that it is not very professional to carry around with business pants, so decided to get a tailor to do a custom case.
This is the 1st trial, and more design will be coming for him (a new business for him), got 3 different fabric, leather alike (PVC as shown), computer slipcase 1 and computer slipcase 2.
As for the belt clip, it has a pass through loop and magnet loop (so no need to remove your belt).
As for the flap cover, there are 2 different kind (magnet & Velcro).
The final product should have a complete flip to cover rather than open top.
Now, he is giving me for free, as I think he found a new business, going to sell the case for S$35, which I think it is okay, as the workmanship is good and best of all, none in the market for now.
more picture.
All pictures are with my Dopod U1000 in it, real slim & fitting !
where can i buy this case?
it is very beatiful
This is EXACTLY what I am looking for. Why does nobody sell anything like this ?
johnnykok said:
more picture.
All pictures are with my Dopod U1000 in it, real slim & fitting !
Click to expand...
Click to collapse
If he can start taking orders now he's got a winner! Has he got a website? Does he want one? Hosted free? Taking Paypal Order? I'll sort it all out for him ;-)
apphoen said:
If he can start taking orders now he's got a winner! Has he got a website? Does he want one? Hosted free? Taking Paypal Order? I'll sort it all out for him ;-)
Click to expand...
Click to collapse
I am still waiting for his 2nd trial (complete top flip and other material).
This is only available in Singaproe, as he is just a local Chinese old tailor, so no website, no Paypal, only got Singapore local number and only speak Chinese and Cantonese
looks good.. just the rear clip portion looks cheap,,, but gd idea.... wat abt any bigger to contain keyboard.
johnnykok said:
I am still waiting for his 2nd trial (complete top flip and other material).
This is only available in Singaproe, as he is just a local Chinese old tailor, so no website, no Paypal, only got Singapore local number and only speak Chinese and Cantonese
Click to expand...
Click to collapse
Ah well, not to worry - I'm sure there will be similar offerings over here soon enough.
Just visited him again, still do not have the 2nd design, as he is real busy with his real business (PDA case is a new business).
He just shown me a new fabric, real sheep leather, very thin & soft. I do not think it can hold as belt clip case, but can make it into a slipcase, just a protective case over the Ameo in case of scratches
johnnykok said:
Just visited him again, still do not have the 2nd design, as he is real busy with his real business (PDA case is a new business).
He just shown me a new fabric, real sheep leather, very thin & soft. I do not think it can hold as belt clip case, but can make it into a slipcase, just a protective case over the Ameo in case of scratches
Click to expand...
Click to collapse
That's still a good idea. I for one wouldn't be attaching it to my belt - the case would be purely for protection whilst on my travels.
2nd prototype
He just called up, managed to rush out the 2nd prototype, using notebook slipcase material, complete top flip and using velcro.
This 2nd prototype is so much better, using better material (softer, thicker, elastic, better protection) and slightly bigger, so easier to take in/out when compare to the former (too tight fitting)
P/S : dont have my DC with me, so it is taken by my Ameo
i´d like more the first
the first is TOTAL
johnnykok said:
He just called up, managed to rush out the 2nd prototype, using notebook slipcase material, complete top flip and using velcro.
This 2nd prototype is so much better, using better material (softer, thicker, elastic, better protection) and slightly bigger, so easier to take in/out when compare to the former (too tight fitting)
P/S : dont have my DC with me, so it is taken by my Ameo
Click to expand...
Click to collapse
Excellent, it would be a good idea to place some kind of thin hard material under the leather on the front in order to protect the screen whilst in transit (stitched between two layers of material I mean).
If possible, I recommend a "cut-out" with plastic covering for the status window of the Athena when the phone is closed. Only Piel Frama's is reported to have this once it's in production.
johnnykok said:
I believed lots of people are looking for a belt clip case for your U1000/Ameo, and not much can be found in the market.
After buying Lowepro SlipLock™ Pouch 20, still find that it is not very professional to carry around with business pants, so decided to get a tailor to do a custom case.
This is the 1st trial, and more design will be coming for him (a new business for him), got 3 different fabric, leather alike (PVC as shown), computer slipcase 1 and computer slipcase 2.
As for the belt clip, it has a pass through loop and magnet loop (so no need to remove your belt).
As for the flap cover, there are 2 different kind (magnet & Velcro).
The final product should have a complete flip to cover rather than open top.
Now, he is giving me for free, as I think he found a new business, going to sell the case for S$35, which I think it is okay, as the workmanship is good and best of all, none in the market for now.
Click to expand...
Click to collapse
Dear Johnny Kok ,
I am pleased with this first pvc designed look , however for S$35 price is so so , but the metal magnetic button at the belt loop is a bit thick .
The second fabric case looked less attractive , price should be cheaper i think , but the belt loop area should be better , no protuding metal button .
I am from Malaysia , is there a way to buy from you either one of these ? Thanks and regards , pls reply me .
[email protected]
http://www.calculatorsource.com/tp-pda.html
It looks like it might work given the fact they will custom build it..
The longer flap also has a piece of plastic inside to help protect the screen.
Looking for some feed back. I may order one to give it a shot..
Thanks Kevin
Looks like it would work well, and has the right price (if you don't want leather).
Ok..I ordered one in a horizontal layout with a belt clip. I will take some pictures and post them when I get it. About 2 weeks.....
hs1333a said:
Ok..I ordered one in a horizontal layout with a belt clip. I will take some pictures and post them when I get it. About 2 weeks.....
Click to expand...
Click to collapse
Hs1333a, has it arrived? Looking forward to your picture
edit: could'nt wait, so have gone ahead to place my order too.
Not yet...They told me it shipped from the mfg on or about 1/16 so it should be here any day. I will get some pics up as soon as I get it...Hopefully it's well made and practical..fingers crossed.
Thanks Kevin
Ok...I just got the case and it's made very well. The only thing that wasn't done to my spec was that I asked for a metal spring clip for my belt instead of the belt loop. I have a call into the mfg about correcting this. I went with the dimensions of 5 1/4" x 3 7/8" x 5/8" Horizontal Layout and that allows enough room to have the keyboard attached as well. I'm going to see about having one made up using a smaller thickness of about 3/8" this should make for a nice snug fit for just the device. Any questions give a shout..
If anyone is interested I would go through the mfg directly.
The Pouch Inc
www.thepouchinc.com
1-800-727-6824
Just an update..The Mfg called back and they were very polite and helpful. Because of the mishap with the belt clip they are going to send me another case. I changed the 5/8" to 3/8" on this one to get a tighter fit. I never expect anything for free and since I'm changing the original dimensions they are only charging me half price for the new unit, which I feel is fair.
New case with belt clip
I just received the updated case with the belt clip and smaller width(thickness). The unit fits in nice and snug. The material they use stretches so it keeps everything in place. The case is pretty nice and very well made.
Thanks Kevin
Did you order the thin case with a hard flap to protect the screen from impact damage when not connected to the keyboard?
I like the spring clip, but without any covering I've always found that they really scratch up the belt after using it for awhile. Is the other option the belt / clip web strap?
Can you post a picture of the bigger case with the complete device with keyboard attached. I'd like to see how bulky it looks.
Thanks
hitch said:
Did you order the thin case with a hard flap to protect the screen from impact damage when not connected to the keyboard?
I like the spring clip, but without any covering I've always found that they really scratch up the belt after using it for awhile. Is the other option the belt / clip web strap?
Can you post a picture of the bigger case with the complete device with keyboard attached. I'd like to see how bulky it looks.
Thanks
Click to expand...
Click to collapse
Here's a couple of comparisons of the two cases. The tinner one also has the flap with the plastic on the inside to help protect the screen. The bigger case has the belt loop and I believe the other clip is a locking buckle(see pic).
All in All I like the unit without the keyboard and it fits great in the thinner case...
The picture 2nd from left on above post is the unit with keyboard in the larger case
http://cgi.ebay.com/Leather-Carrying-Case-for-HTC-Advantage-X7500-X7501-New_W0QQitemZ180231674522QQihZ008QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just wondering if anyone's tried this case. It would be nice to know about the quality and fitting. I'm also very curious if that belt clip will last.
Thanks in advance!
J
hello,
I've not tried this case but I've had several with the plastic belt clip
and if you have a job that involves sitting a lot they can be fragile,
or if you do lots of manual work. I find the sewn belt loops flatter
and stronger. the krussel case is hard to beat
jay
Never used it, but i'm certain you'll soon be disappointed if you buy that case. IMO, a good case is an absolute must. You don't want your Athena falling off your hip when getting out of the car do you? This always happened with my old axim case with a plastic clip. Nutshell guarantees their case, including the steel clip or leather loop (whichever you get), for two years. Expensive though, but worth every penny to protect my athena.
http://tuff-as-nuts.com/index.asp?PageAction=VIEWPROD&ProdID=564
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
skyungjae said:
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
Click to expand...
Click to collapse
Just watch the screen. I once put my universal in a case in my trousers pocket, you guessed it the screen cracked! cost £100 to fix it. lord knows how much the athena's screen would cost, more than the machine is worth I guess.
I have one, the 2nd week the belt clip brike getting in the car. Not to mention the phone slipped right out from it twice, with my foot action as a cushion (broke a piece of th tab on the battery door) and the 2nd time was last week at the gas station. The cases are designed with crappy materials but with a bit of mod I saved mine from going into the garbage. I had to cut the back open and put a piece of plastic in it for more support against it flopping. I used a hot air gun to soften the side holders and bend them in slightly for a more snugged fit. At the end of all that the next morning I broke the plastic tab on the case going into the car. Now I still have the case using but only because I've not finished mounting the belt clip on the OEM case as yet, as i've already already cut a caller display into the case and used that strip to make a leather flap to close it. Once I find a steardy belt clip I will post pictures of the mod. If I can't find one strong enough that will not break I will go for a standard clip mounted back and stitched on for a better look.
Back to this clip, I would recommend getting it if you can do a little bit of mod on your own, but BE WARNED if you don't mod the rails on it, your liable to damage your device, when (i said when, because eventually it will) slide out.
See what I said about that ebay case, and what you should buy instead on my thread: http://forum.xda-developers.com/showthread.php?t=344605
Bottom line, run FAR, far away from that ebay case.
Tuff-as-Nuts now has an option to get a slightly larger Athena case that will accomodate the Athena+case (thanks to my having one special ordered one). You can now have it either way.
Brad Miter
Ebay Trash
I had the ebay case for one week before the clip broke. It is made of the cheapest, thinnest plastic I have ever seen. I have a Verizon phone from my employer that came with a clip similar to this one. Even though the Verizon phone is about 80% lighter than the Advantage, the clip that came with it has plastic three times thicker. After the Ebay clip broke, I started using the case with my Verizon clip. It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
LocoHarami said:
I It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
Click to expand...
Click to collapse
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Abram said:
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Click to expand...
Click to collapse
A very good, protective black leather case. No belt clip.
http://cgi.ebay.co.uk/Book-Type-Lea...hash=item120199602780&_trksid=p3911.m14.l1318
Post 12 from wajiguqu0223 reported. Completely meaningless in the context of this entire board, and my guess is its a precursor to some major spam campaign.
edit: old post 12 has been deleted. Good. (which now makes this post 12, lol)
Hi Guys, just received this in today's post and only cost me £2.50 (was ordered on Boxing Day, they are now costing £2.99) including postage and packing from Hong Kong. My partner also bought one for her Tocco and the total cost was £5 by Paypal. What a bargain.
It is superb, leather, and exactly as described with magnetic catch. Leo fits perfectly but unfortunately the screen guard is a midge's too large but it isn't needed anyway.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250552030138&ssPageName=STRK:MEWAX:IT
Regards, Baz
Nice find How long did shipping take, and I presume the magnet doesn't effect the screen, or the compass?
It took exactly 10 days from ordering to delivery this morning. My partner's brother bought one for his HTC and showed me on Christmas Day. I ordered mine the next day and it arrived this morning. It's brilliant, especially as it was only £2.50 (although selling now for £2.99). Includes case, screen protector and screen wiper.
Magnet doesn't affect the screen as it's on the flap. I have tried the compass and the needle is affected if you move the magnet over or under the phone.
Regards, Baz
That is so darned cheap!!! I am impressed!
Thanks Baz - Ordered
I will use it for those 'rough & tumble' times when the phone needs more than my (ill fitting) Zagg
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
robertsmith1873 said:
Hi,
how is the HD2 held in the case i can't see from the photograph?
is the proximity sensor ok?
thanks
Click to expand...
Click to collapse
One of the pictures lower down show a plastic section that it clips into.
so it does, i did not hover the mouse, silly me.
Look ok for 3 of the queens pounds, i'm havin that.
TATA
Just taken delivery of one of these cases and I must say it's very good value. OK it's not 'true' leather but bonded leather so probably won't be as durable in the long-term as top-grain case, but unless you're extreme in your use of the HD2 then it'll probably last the 18-24 months of a typical phone contract.
The quality is very good and it fits very well, the plastic housing into which the phone fits offers great additional protection around the external perimeter of the phone so will reduce the risk of screen damage should the phone be accidentally dropped. The aperture for the camera lens in sufficiently deep enough to cover the lens cover so you don't get the annoyance of the sharpish lens from rubbing when in your pocket or on a nice polished table! Importantly (for me) it doesn't add too much bulk to the phone so it still slips easily into a shirt pocket and the phone can be easily popped-out so I can place it on my desktop cradle or in-car holder.
The finish looks very professional with the light grain being very similar to the grain on the original HTC leather pouch. It's a little more shiny than the original pouch finish and is in black, which I personally think suits the phone better. The stitching on mine is finished in a deep golden thread (slightly darker that the thread used on the HTC pouch) which adds a nice detail. The inside of the case is finished with a fine man-made suedette lining which shouldn't scratch or mark the phone in any way. There's no pockets for business cards or SD cards, but these would only add to the bulk and are not needed for most users I would have thought.
The fit is excellent and the phone fits into the hosing very snugly without the need for annoying clips or straps across the face of the phone. The magnetic clasp seems to hold very well and closes with a reasuring 'snap'. The volume control, Micro USB connector and headphone socket are all easily accessible when the case is open, although annoyingly there's no pass-through hole in the case to attach headphones when the case is closed. Apart from that and the compromise on the leather, there's little to fault this case and for the very low price you really can't beat it for smart looks and a good degree of protection for your phone.
In addition to the case, I was also supplied with a screen protector (with small cleaning cloth) which looks to be of reasonable quality although I haven't fitted this myself as I find these tend to lift at the edges and also reduce the responsiveness of the screen.
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
For £2.99, this is a no brainer. Just orderd mine.
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Still waiting for mine (ordered 6th Jan...), so not sure what the material is in that area.
At your own risk,
If 'leather', use a belt hole punch.
Or a small SHARP drill (& if its hard plastic).
If (also) fabric, put a dab of super glue on the fabric, to seal the weave, first & let it dry before holing it.
If a man made woven fabric, heat the hole punch, so that it will fuse the cut edges of the hole when pierced.
Metal grommet / ferule not recommended in case it causes a short when inserting / removing the headphone jack. Over a period of time, might remove the gold plating off of a jack too.
Leather case
Picked up one of these a day or so after I got my device, same seller as OP.
The case is nice enough, have dropped it once already - no damage to the device thankfully. The front flap can fold all the way back round the device and be held there by the backside of the magnet in case you're watching a film/browsing/gaming and don't want the flap in the way.
The only downside that I can see is that it's an absolute git to get out of the plastic 'cradle' (more like a bleeding strait jacket) if you want to change memory card/battery or just get it out to show it off.
any comments?
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
omneity said:
Given the low purchase price, I'll probably take a tool to the case and cut a whole for the headphone jack, I just need to find a suitable grommet/ferule or means to seal the hole so it doesn't fray or look too untidy. Any hints or tips on how perhaps to achieve this this would be welcome.
Click to expand...
Click to collapse
Will it fit into a paper punch?
bakabear said:
was looking to get something along these lines, with slots for cards so I don't have to carry along my wallet at times, but without the belt clip/knob
the hand stitched cow leather is customizable but at 100euros, alittle out of my budget
Click to expand...
Click to collapse
Beware the proximity sensor for your ear. In that image it looks to be covering it!
robertsmith1873 said:
Beware the proximity sensor for your ear. In that image it looks to be covering it!
Click to expand...
Click to collapse
Thanks for the reminder! almost forgot bout it, is it across the top row beside the notification LED? looked through the manual but no reference to it
BTW, found a cheaper alternative, just as functional from another thread
these ones bout 40euros each, the tan one allows access to the bottom ports whereas I dont think the black one does
which would you guys prefer? worry that the tan one might block the sensor as well
Just ordered one, thanks for the tip!
Simon
Leather slideout sleave for the HD2
Hi Community, I like my HD2, so I bought a leather case for it. It's like WOW.
It costs 13,90 Euro - i.e. not the world and fits very well
Check it out in EBay:
SunCase Etui Tasche Ledertasche Case LUXUS für HTC HD2
The seller is: sale-hamburg
http://cgi.ebay.de/SunCase-Etui-Tas...temQQptZDE_PDA_Zubehör_KM?hash=item23043167fb
Have fun, as I am having
Regards
Just got my £2.99 case today. It's epic value for money I'm hoping that this will be enough to protect my HD2 when I go snowboarding in a couple of weeks time.
damn i noticed this thread too late... they are sold out i hope they will get some more for salle
Hello all
I'm looking for a soft material (leather, fake leather, canvas what ever) belt clip holster for a Note 5 that is in a Otterbox defender as well.
Hopefully the holster would host most of the device but still be easy to slip out and also would have a magnetic closing clip.
Basically I need to the Otterbox due to my environment, and tried it yesterday for the first time and it was great, but the clip on holster for it that comes with that I can see is not going to work.
For the one smartphone I had before it was considerably smaller but I had a holster for that, and in using both, I know that is what I need.
So does anyone have any ideas?
Thanks greatly for any help.
WBFAir said:
Hello all
I'm looking for a soft material (leather, fake leather, canvas what ever) belt clip holster for a Note 5 that is in a Otterbox defender as well.
Hopefully the holster would host most of the device but still be easy to slip out and also would have a magnetic closing clip.
Basically I need to the Otterbox due to my environment, and tried it yesterday for the first time and it was great, but the clip on holster for it that comes with that I can see is not going to work.
For the one smartphone I had before it was considerably smaller but I had a holster for that, and in using both, I know that is what I need.
So does anyone have any ideas?
Thanks greatly for any help.
Click to expand...
Click to collapse
I use one of these, I picked up when getting an oil filter for my car, holds my note 5 in an otterbox symmetry, as well as a nexus 6 in a slim case, at the same time. should be plenty for the note in a defender
http://www.oreillyauto.com/site/c/d...yword=phone&pt=N1687&ppt=C0107#itemDetailTab_
https://www.amazon.com/gp/product/B00CNWNTHO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Use this with my Note 5 and spigen case. Used this when I had a note 4 and commuter case as well.
Hey guys.
Been a while since I made this post so I kinda forgot about it, but thought I would post what I did end up getting.
Got this off ebay: http://www.ebay.com/itm/371557478974?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Given its price as you can expect its not top shelf quality in materials and construction.
Basically for this unit I actually found one of some other brand that had a dif imprint on the front, but it was completely the same in every other way. So I guess point is, there is probably some cheap maker who sells to a few resellers.
Again the quality is not great and for both they had some bad assembly quality and in actually in completely dif areas. So guess my point is, is kinda a crap shoot as to what issues is might have.
But if its just a little off at first, funny things with these is they do tend to stretch and eventually mold to your phone. But will say the one I am using now even had the center part for the clip a bit off the 0-180 mark, so its already getting worn out an loose.
But probably the biggest thing I would say is that while the phone and with the otter box cover fit into the sleeve part nice, the front cover really did not close right at first.
Basic problem is that as it uses a magnet, the phone with the otter box was a little to tall an so the cover could not wrap around the top enough to meet its counterpart contact inline.
So basically the cover would just sit flapped open a bit.
For this though it actually was not that far away, so what I did was spend sometime with a heat gun and the phone in the case and just heated the outside and pulled on it till I stretched it enough that it made good contact.
Thankfully I was able to do this without doing and physical damage to the material either.
In the end the case is pretty good for me, was nice and cheap which if you're in a harsh environment like me is good as any is going to get destroyed, so at least I am not doing that to a more costly case.
Fit is good enough and while in need of a little work when I got it, after now is fine.
Down sides is I am sure given the quality it will only last a year or two, but hey who keeps any device longer then that. Also its a gamble to what ever defects it might have when it comes and perhaps if bad enough, may not be usable at all.
Hope that is help to others.