Hey people, look at these 2 pictures, that I just have taken:
With the backcover on:
http://www.4shared.com/file/53179104/2a29789d/Med_cover.html
And without:
http://www.4shared.com/file/53179169/2c2a3a6/Uden_cover.html
As you can see, there is a big difference. Hmm, why haven't HTC done something to this problem?
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
flaviopac said:
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
Click to expand...
Click to collapse
Yes I'm very sure about that. I have tried with more pictures.
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
happyguy82 said:
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
Click to expand...
Click to collapse
Haha, no i'm not that stupid Nothing "protection" is on.
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Syphon Filter said:
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Click to expand...
Click to collapse
Without the back cover, the Diamond takes decent pictures, still slow on focusing and shutter release(you should see the Samsung F480, this little fellow shoots pictures almost like a normal digital cam) but pretty good for a 3.2 MP cam.
WITH back cover however, the pictures look like crap to me. Sometimes it looks like if the pictures have been taken through light fog and I can clean the lens cover as much as I want(not easy, tiny little bastard), after some time, the lens gets dirty/whatever again. Horrible, HTC definetely needs to find a better solution.
Here some more http://www.howardforums.com/showthread.php?t=1365731&page=43&pp=15
info
remove the small mirorr in a back cover that protect the camera from dust
Aqrab said:
remove the small mirorr in a back cover that protect the camera from dust
Click to expand...
Click to collapse
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
mooooooa said:
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
Click to expand...
Click to collapse
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Aqrab said:
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Click to expand...
Click to collapse
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
mooooooa said:
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
Click to expand...
Click to collapse
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Aqrab said:
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Click to expand...
Click to collapse
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
well ideally you should or you should remember not to put you fingers on the lens (not an easy task given the camera position i know) but lets be fair here, i mean its not as if you would take your stand alone digital camera, smear you greasy hands over the lens all day (+ let dust collect on it) and then expect it to take perfect pics...
be practical, if you remove the case screen for long you are gonna end up with scratches on the actual camera lens! and that's not easily replaceable now is it (not like the back cover...) lol
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
yah i know
im jast saying when we want to clean it
remember not to put your fingers on the lens
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
tomchap said:
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
Click to expand...
Click to collapse
Your right!
white balance
Granted the backcover lens protector doesn't do justice to this phone. Adjusting the white balance does for improvement (say the lighhtbulb mode) I find. Again the camera does let this phone down, compared to others of similar spec. Can a software tweak solve the lag in motion when shooting in video mode at all? Is it as a 'simple' case as that I wonder!?
I just did some test shots with my xda diamond from germany and I honestly cant see a difference. can you tell which one is taken with the cover off?
Related
is it me or does anyone else have this problem
just searched but found nothing
saw on coolsmartphone and he said there was a cover on the lense?????
if i can't see it
anyone????
Take off the back cover of the phone and try again! You will see a DRAMATIC difference...
This is apparently due to the transparent plastic porthole of the phone's back cover.
so.....
you need to take the back of to take a good photo
It would appear so! I posted some pics on coolsmartphone with the cover on then the cover off and I could see a remarkable difference.
I think its the plastic lense cover on the back cover of the phone.
See the post here: http://www.coolsmartphone.com/forum/viewtopic.php?t=12579
also discussed at Modaco here: http://www.modaco.com/content-page/269622/camera-lens-cover/page/20/
Or you could try and clean your lens with a proper lens cleaner.
Surur
i choose to break the cover plastic
!
Tinngsmile said:
i choose to break the cover plastic
!
Click to expand...
Click to collapse
just pushed the lense cover out.....easy with no problem
we really shouldn't have to break the phone to make it work really should we
I'd like to say Thank You to everyone in this forum and providing such a great site for us. I am very admire all yours talent that I wish I have, but I don't. I did I a little mod to my Tilt camera lens and it came out good and I'd like to share it with you all. This mod require no drilling to original lens and look oem.
1. A piece of Micro Slice Glass. 20 cents
(used for microscope, you can get it from science store)
http://www.flickr.com/photos/[email protected]/2914039158/
2. Knife sharpening stone, fine gain.
3. Glass cutting tool $6
http://www.flickr.com/photos/[email protected]/2914039484/
4. Qtip
5. Double side tape
Instruction:Sorry I don't know how to attach pictures into my post. Have to link it to Flickr. Hope you don't mind.
-To remove the lens, use a Qtip & push the lens out from the back side of the cover, use your figure nail to lift the lens out from the chrome frame.
http://www.flickr.com/photos/[email protected]/2913195413/in/photostream/
http://www.flickr.com/photos/[email protected]/2914041602/in/photostream/
-Use the lens to mark the size onto the Micro Slice Glass and cutting it with the glass cutting tools, you may need to try a few time to have a straight cut. http://www.flickr.com/photos/[email protected]/2914039158/
http://www.flickr.com/photos/[email protected]/2914039484/
-Now you have the piece cut out, here the fun part. use a sharpening stone and work near the sink cause you need to wet the stone during the sanding.
while sanding the new lens, use the original lens to check the shape. I made my a bit bigger then the original so it can be fit in tight without using any glue. Double side tape used just for insurance purposes.
http://www.flickr.com/photos/[email protected]/2914080332/
-Here the final product.
http://www.flickr.com/photos/[email protected]/2914250782/
-That's it folks, this is the best and the cheapest and the oem look camera lens mod ever. Here some shots I took before and after. Let me know what you think. Pictures are in order, original lens->Moded Lens->no cover.
1.http://www.flickr.com/photos/[email protected]/2914040902/
2.http://www.flickr.com/photos/[email protected]/2913194597/
3.http://www.flickr.com/photos/[email protected]/2914040044/
I will take some picture tomorrow for you to see. Time to sleep.
Those before and after pictures just show what a Mickey Mouse lens cover HTC has provided us with. How about a petition for a new back cover with a glass lens cover?
Top mod, gonna do this one.
BS...
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
The generic name would be a cotton swab.
Without cover is still better, and having done the mod many months ago, the dust problem is overblown.
Surur
Srart-up?
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
I don't know how many kaisers are out in the market but a manufacturer in the far-east (due to cost) can make such back cover with integrated fixed lens in the cost of ~$0.10 (go for worst case 1$) each and I'm sure most of us are willing to pay... lets say $15 each ? so here is a win-win opportunity waiting for an entrepreneur.
I did a similar yet cheaper fix.
Pop out the stock lens.
Cut some plastic (used the package some RAM for my pc came in)
Use the double sided tape and place it there. It's not that noticable but the picture quality improves a great amount.
Great mod, just took my back cover off and the picture is much better. I'm going to try just removing the cover altogether.
Lol, this is so much nicer than my ghetto fix! I had just popped out the plastic lens cover (and succeeded in breaking the little chrome-painted piece in the process, of course) and put a little piece of extra screen protector over the actual lens to protect it from the dust and what not.
Gotta' try this!
my lil camera lens cracked so i removed it and it has been off for over a month. i dont really have issues with debris getting under the battery cover. besides, its not hard to remove the back and clean it with my shirt and put it back on
nice, I will have to try this
You really can notice the difference. I just quickly take the back cover off, take a photo and then put it back on. I really notice the difference now. Thanks heaps!!!!
Thanks for the info... from now on, when I want to take a picture, I'll remove the back cover
I was thinking of doing this mod but using glass designed for optics instead of standard glass. A quick web search found http://www.astraproducts.com/i_ptsheet.asp. Are there any photography experts out there who know if this type of glass work any better than standard glass?
Also, if someone (possibly myself) were to bulk purchase pieces of optical glass "pre-machined" to fit as a replacement to the tilt, would there be much interest in purchasing these? I suppose it would all depend on cost and I have no idea what the cost would be, but maybe worth looking into.
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
mata_mosca said:
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
Click to expand...
Click to collapse
My reason for the mod is because the lense on my back cover is cracked right down the middle so the camera hardly works at all. Replacement covers run $50-$60 so I'm looking for a less expensive fix. I don't really want to remove the lense entirely because of allowing dust into the case and also the actual camera lense would be exposed and liable to scratch.
I tried to find why my pictures are soo foggy.
With backplate...
http://i241.photobucket.com/albums/ff294/kiske13/TytnHotfix2.jpg
and without...
http://i241.photobucket.com/albums/ff294/kiske13/Hotfix3.jpg
It's obvious that the plastic window of the camera is of a poor quality!!!
kiske13 said:
I tried to find why my pictures are soo foggy.
With backplate...
http://i241.photobucket.com/albums/ff294/kiske13/TytnHotfix2.jpg
and without...
http://i241.photobucket.com/albums/ff294/kiske13/Hotfix3.jpg
It's obvious that the plastic window of the camera is of a poor quality!!!
Click to expand...
Click to collapse
dang thats a huge improvement man, it makes me want to try and take that piece out or fit a diffrent type of glass or sumthing there..
People always look at me weird because I pull off the faceplate right before a picture snap!
I thought everyone was aware of this already?
Pretty much everyone is aware, it is like taking the lens cap off before you take a picture.
Other solutions
I've seen some replacement battery cases where the lens cover is just a hole (usually for larger battery replacement covers) and heard of people carefully drilling a hole.
If I can get a replacement back cover I'd go for drilling although it would put the lens itself at risk
just try to pse some screen guard on it
or cleanwith and antistatic clot means fibre
this will solve problem
infact i m doin the same
i have pasted a skin guard on it
workking perfect
Hi,
I read somewhere that photo quality is bad because of automatic white balance, but even when using manual white balance settings, the photo quality is like blured. Like there is fog between the camera and the subject.
Anyone have the same issues ? Or my camera is defective ?
How you corrected it ?
Sample picture attached.
Hmm, that's weird. Try to really clean the lens protector and make another picture, seems to me it's blurry because you're back cover is all mess )
Clean with coton and alcohol you think ?
I cleaned both sides of the battery cover, and directly on the camera lense, lots better quality ^^ And as long as you clean it with something that doesn't leave a thin film or the like, it's ok. Just watch the edges of the rubber/plastic stuff on the backside of the cover heh.
kfallz said:
I cleaned both sides of the battery cover, and directly on the camera lense, lots better quality ^^ And as long as you clean it with something that doesn't leave a thin film or the like, it's ok. Just watch the edges of the rubber/plastic stuff on the backside of the cover heh.
Click to expand...
Click to collapse
Sorry I'm not good with english, could you explain a little more how you cleaned it ?
Thanks
Should I clean with this :
http://pedagosite.net/imagiers/img_0401/cotontig.jpg
with alcohol on it ?
damn, just rub it on your t-shirt
.:george:. said:
damn, just rub it on your t-shirt
Click to expand...
Click to collapse
easiest, cheapest, and most common solution......
Lol ok ty
I use to have this condition also, not just with my o2X, same thing happen to my DHD, desire and HD2.
The key to the problem is your LED flash.
If your finger during hold you O2X is too close to the LED, the flash will reflact back from your finger and disturbance the picture quality, making its show like there is a fog in your picture. Check back your finger on how you hold your O2X.
My 2 cents.
I used a kind of alcohol yes, and a Q-tip(?) like the one in your picture.
Does the camera touch the surface? Is the camera and lens cover recessed behind the battery cover?
I want to use the phone caseless, but there's no way I'm gonna let my camera lens get scratched.
Yes if you are using the stock cover, no if you are using the included flip cover.
EarlZ said:
Yes if you are using the stock cover, no if you are using the included flip cover.
Click to expand...
Click to collapse
The flip cover isn't always included with the Note (mine wasn't), but is an absolute must in my opinion! I hadn't even noticed that there was a recess on the flip cover, but not on the original back.
Regards,
Dave
Must be a regional thing, in my place its packaged by samsung as part of the purchase.
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Yumunum said:
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Click to expand...
Click to collapse
The back for the flip cover is necessarily thicker than the original back cover to allow for the "flip" to connect to it, which is why the camera is recessed whilst in it.
Regards,
Dave
foxmeister said:
The back for the flip cover is necessarily thicker than the original back cover to allow for the "flip" to connect to it, which is why the camera is recessed whilst in it.
Regards,
Dave
Click to expand...
Click to collapse
What confuses me is why Samsung put the camera lens higher than the original back cover in the first place. Could they have not put a lip just around the camera module? *sigh*
Yumunum said:
What confuses me is why Samsung put the camera lens higher than the original back cover in the first place. Could they have not put a lip just around the camera module? *sigh*
Click to expand...
Click to collapse
there is a physical limitation to what they can and cant do. if you want the camera recessed, you would need to increase the thickness of the phone. the slimness of the phone is one of the reasons why the phone still fits in most pockets despite its large screen.
by launching the flip cover and the device as separate items, they can still claim the device is slim, and still have the option of a recessed camera.
putting a lip around the camera model increases the device's thickness. cant really recess the camera into the case anymore due to the physical size of the camera unit and the amoled display. since the camera unit in our device partially behind the screen, not too much they can do. whereas with the iphone, the camera is in a corner which is not directly behind the screen, giving them a bit more room to play with.
samsung arent miracle workers. even they can only pack in so much.
Yumunum said:
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Click to expand...
Click to collapse
The phone came with the stock cover. Flip cover was included in a separate package for free though. You should see me trying to install it over the stock one. Happy days