Database Develop

Hard SPL for Wizard G3!!!

Removed pending posting of instructions.

What is this for?
Thanx.

Prislav said:
Hi!
Subj - http://rapidshare.com/files/76444771/wzg3.7z
Click to expand...
Click to collapse
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).

Totally agreed! I wouldn't go for it!

I don't mind to brick my wizard again!

mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.

mfrazzz said:
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).
Click to expand...
Click to collapse
Lokiwiz has been a trusted and faithful friend. Until I get more info, instructions, screeners even...I will keep using my trusted friend Loki.
No offense to the OP, but "read my other posts" doesn't tell us much. Your other posts are just like this one. Short and to the point, no real info given...nothing telling me how to install/run it. Nothing troubleshooting if an issue should arise. Read the Loki thread, or Dr. P's tutorial...everything anyone needs to know about Loki is there. Yours...not so much.

Hey, all I need is a "no-answer" answer from the poster and that's enough for me to hold back.

Prislav said:
mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.

i tried on my friends wizard not mine.. .copy alll those files on wizard.. and click spl.lnk..and see the difference...

zabardast_1 said:
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.
Click to expand...
Click to collapse
Very true!!
IF, you check his entries, other posts like this one have been made in other device sections. Now how all the mighty guru's here have somehow overlooked this ability, and he has manged to make it happen...
When a dev here releases something, it is does with so much info that if something does happen, a person KNOWS it can be fixed. To say:
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Tells me this person really gives a sh*t less about whether or not my usage helps or kills my device. Real nice attitude there...makes me really confident about using the linky.
And to the poster above...you feel so confident about it that you tried it on a friends wizard??? If it does work, as you say, please give us more details about it...since we have none really.

Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.

jwzg said:
Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.
Click to expand...
Click to collapse
Thank you.
I certaily wasn't about to take the risk, especially with the attitude from the OP.
Again, thanks.

Guys dont bombard like this , Prislav has always presented raw content like this in Prophet forum also. Maintaining the terminology, just see diagram, might be useful- simple
But im not favouring any one. please!

I force nobody. Do not want, it is not necessary. To me it is not important.

Well this thread seems nice and hostile .
Unless I am missing something all Prislav has done is to use JumpSPL by Pof (Nice WinCE Tramp by the way ) to fire off a patched G3 SoftSPL and from there let you launch into the ROM update routine.
Prislav’s post may have been a little short on details but there is plenty of info on the board and in his previous threads on the subject. Pof's JumpSPL thread is also a goldmine of info.
Prislav also seems to have been kind enough to provide a patched 'flashable' SPL for G3 devices.
I have not tried this yet (my G3 junkers are at home, so I will tonight) but looking at the dumps of the files and the steps that Prislav has gone through I think this should work.
The SoftSPL seems to contain nothing dangerous and I test launched it on a G4 I have on my desk to no adverse affect (in fact it did almost what I expected, not sure it is putting the device into the correct 'wait for USB' state mind you but it does answer to prods from MTTY ).
Looking at the way the file is patched (and my limited knowledge in this area may let me down, I am more of an ARM Linux hacker) is very interesting. It also looks very much like this could be wrapped into a SoftSPL flashtool that just soft patches a G3 before flashing (and also gives users a choice to flash a HardSPL if wanted, just like we do with G4’s and most modern HTC devices).

Ok,
Just an update to my last post,
I found an old G3 with a broken keyboard under my desk. IPL/SPL 2.17, ancient radio and AKU2.
SoftSPL via JumpSPL from Pof/Prislav seems to work fine .
Converted the Hard-SPL.nb to an nk.nbf (with just the SPL in it).
Flashed the resulting nk.nbf.
Device is now running a patched SPL (2.H4).
Just upgraded device to WM6 from an off the shelf ROM (had Jag 4.0 handy) using the usual NVID update tool.
The end result is an old, unhacked WM5 G3 upgraded to WM6 in a matter of mins.
Download: I will edit this post when I get home and have had a chance to upload the files to my site. - Stuck at work right now.
Edit @ 22:00, 17th Jan: Download is now up here. Use with care and don't come crying to me (or Prislav ).
HowTo: Install PatchedSPL on a G3 Wizard (or just run a SoftSPL if you flash another OS ROM at step 7 with the included flash tool).
Warning: I have only tried this with 2.* IPL’s/SPL’s, I can’t be sure it will not brick devices running 3.* or 1.* IPL’s/SPL’s. It will be a few days before I can test this so if you have a 3.* or 1.* bootloader I would suggest you leave this well alone. Do not try this on a G4, there is no point and you may well brick it .
1: Install latest ActiveSync (If you’re upgrading from WM5-6 your going to need it)
2: Download the rar from my website.
3: Copy the contents of the “Copy to root of G3 Wizard device” folder to the ROOT of your Wizard using ActiveSync.
4: From File Explorer run the SPL shortcut from the root of the device.
5: Wait for the screen to go white (you are now running a patched SoftSPL running from RAM),
6: Unplug and reconnect the USB lead to the PC (you can check the connection with MTTY if your so inclined).
7: Wait a few seconds and start the ROM upgrade in “Flash-WizG3-PatchedSPL”.
If all goes well this will work just like a normal ROM update (without anything shown on your Wizard’s screen) and your device will reboot after a few mins.
Check the version of the SPL running, if it is SPL version 2.H4 all should be fine and your now running a CID unlocked device that can take any Wizard ROM.
John

What's the difference between CID unlock(using LokiWiz) and this proceudure (Hard Spl)?

AldoWeb said:
What's the difference between CID unlock(using LokiWiz) and this procedure (Hard Spl)?
Click to expand...
Click to collapse
To be honest, very little. Both leave you free to flash a ROM of your choice .
This just uses the same 'methods' as used with newer HTC devices and the G4 Wizards.
It will also be easy enough to wrap with ROM's to create 'G3' SoftSPL upgrades that flash to any G3 device without messing about. Just grab the installer, drop your nb.nbf of choice and run the upgrade.
I'll try and bundle up such an installer tonight if I get time.
Hmmm, why do I feel like I have hijacked this thread .
John

So You mean:
You can Create such an installer than given a certain NBF (OS) does even the CID unlock itself.
It would be great
Aldo

P3600i Flashing Tutorial

OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have

Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o

o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.

about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks

whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.

Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.

gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol

Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?

gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.

woot it works! thanks

zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while

joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.

Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!

Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL

genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.

genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?

All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!

Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help

i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery

Hard-SPL Unlocker for Xperia X1 - Released!

yes, the xperia seems to have a normal HTC SPL... so it will probably need a hardspl. =)
[size=+2]UPDATE: RELEASE TIME[/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
UPDATE - NEW: 0.78.OliNex Hard-SPL, I was asked to help with this as 0.78 seems to work better for some newer devices. it's the attachment xperia078_2.zip - to flash this over your existing Hard-SPL, you can just use customruu or SD flash. you can also flash it via SSPL (such as Xperia-SSPL-Manual EXE) or if you overwrite NBH file in X1_HardSPL_v1 after running the exe.
thanks for any donations, you can see the donation link in our signature - the big link saying "elite project".
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
***
IMPORTANT: extra Xperia-specific notes: the prerelease roms out there in the X1 ROMs thread are not going to flash on retail devices because the radios they include are only flashable on prerelease devices ("Security unlocked" message in SPL can be seen on these). so what you need to do is repack the NBH without the radio - this will only work with Hard-SPL though, as repacking breaks the HTC sign on the NBH file.
I had a tester upload a repackaged UK image, which will flash fine. you can find it in the x1 roms thread. =)
***
TROUBLESHOOTING TIPS:
- read the instructions.
- read the instructions.
- read the instructions.
- if you get connection error in RUU after the device goes to tricolour screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. read the thread for even more tips that I don't remember now. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if hardspl EXE won't run, and you are on vista, try to right click it and use "run as Administrator" option
- if SSPL-Manual.exe or enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
***
extra how to: how to restore Stock SPL for warranty reasons.
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.
5. go on with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour screen with 0.52.OliNex version), it goes to 100%, reboots, done.
+1. to verify, enter bootloader (see description above in this post), and check version number on tricolour screen. it should say 0.72.0000.

OliNex said:
yes, the xperia seems to have a normal HTC SPL... so it will probably need a hardspl.
so, let us know if you have a prerelease device to test on... we looked in this forum and saw several people who have one. thanks.
Click to expand...
Click to collapse
I just got my xperia and i'll be willing to use my x1 to test hardspl. Its a retail version and not a prerelease x1 if thats any help.

I have, and have already dumped all rom to raw. You can pm me what you need or catch me on msn.

I can do my best to help.

What is a SPL ?

Does anyone have a working version of the hardspl for the X1 so we can try it? Thanks

Yeah we need SPL big time, any genius working on it?

I said that Olipro and cmonex will make Xperia Hard-SPL. So people, it's time for test :d
And the most important don't forget to say "thanks" and click on donate link

borce_razor said:
I said that Olipro and cmonex will make Xperia Hard-SPL. So people, it's time for test :d
And the most important don't forget to say "thanks" and click on donate link
Click to expand...
Click to collapse
THANX
but I dont see the test download

I sent them a msg a while back (weeks maybe) saying i had a proto x1 and was willing to sacrifice it for the cause. Still am - Nothing back though.

I for one will donate for the cause need a generic uk rom without the crap bluetooth problem

the_flyer said:
I for one will donate for the cause need a generic uk rom without the crap bluetooth problem
Click to expand...
Click to collapse
i've got a generic uk xperia but still have the dreaded bluetooth problem

damn. I have had more luck today with the bluetooth and touch wood havent had any problems since the wifi was switched off...

Have you tryed switching off standby mode? It sorted the bluetooth prob out for me, untill i installed afew new apps. Problem back again

[size=+2]UPDATE[/size]
we will start work today (we = OliNex = Olipro & cmonex)
I'll check the PM's soon, as we need testers.
as for donations: yes we would appreciate them much, would help a lot (the big link in first post, don't worry about it saying diamond/raphael)
P.S.: bluetooth etc offtopic problems should be posted elsewhere, please. thanks

Xleecher said:
I just got my xperia and i'll be willing to use my x1 to test hardspl. Its a retail version and not a prerelease x1 if thats any help.
Click to expand...
Click to collapse
retail version is better! PM me with your MSN contact address

@ Cmonex
I've got X1i (vodafone) retail as well and willing to help in beta testing too.
Also donated £10.00

hassan said:
@ Cmonex
I've got X1i (vodafone) retail as well and willing to help in beta testing too.
Also donated £10.00
Click to expand...
Click to collapse
thanks have you got MSN ?

cmonex said:
thanks have you got MSN ?
Click to expand...
Click to collapse
Yes just click that small icon under uk flag in the right corner.

Donated £10. Thanks for your help with the hardspl guys.

Jade / Touch 3G Hard-SPL Unlocker

well, Hard-SPL is released now! sorry for delay, this was ready last week, but I did not have a chance to get to my PC much.
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]Donations are always appreciated to the big link in our signature ("elite project"). You can also donate via the link offered in the new Hard-SPL program. Thank you!![/size]
[size=+2]EDIT: ATTENTION - I removed the V3 version, everyone who flashes new version (2.32.OliNex) on 1.40 stock ROM, should simply upgrade to a new 2.xx ROM afterwards.
also, new version of HSPL package (V5.2) is here which has some of the issues fixed.[/size]
Preparations:
first an important note, if you want to flash more than one Jade, contact cmonex for additional licenses via http://support.htc-unlocks.com. (the first license is transparently granted and free, so normal users do not need to worry.)
0) this package is for Jade (Touch 3G) devices. for JADE100 so far (SSPL loader checks this and gives a warning), apparently JADE110 is also ok, but if your ModelID is different, contact us for testing!! we will happily help. contact by posting in this thread or by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently. until then, JADE110 etc is also accepted if you click "yes" to continue but it's your own risk to take.
1) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download latest Hard-SPL package (currently v5.20) from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) NEW: internet access is required as the program checks online for updates and license.
4) run Jade-Hard-SPL EXE on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is strongly recommended, on XP administrator login is required. important: if your AV (norton/symantec mainly) warns about a virus, ignore it, it just doesn't like the packer I used to pack the program.
5) if possible, always use Automatic flash mode (for uses of Manual mode, see troubleshooting section)
6) it will ask you to wait while it prepares for the flashing, press OK. follow steps in the program and then in the RUU.
7) some notes: it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred).
more notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
8) device should go to a tricolour screen now that says 1.40.1000 (not .0000!!!), this is the SSPL version, which is temporary.
9) SPL flashes, device automatically reboots, job done.
10) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.32.OliNex, which is the Hard-SPL version.
if it is 1.64.xxx instead then please make sure you actually download last version (v520) and flash using that. 2.32.OliNex is the correct Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
Manual flash mode for USB issues: you should usually go for Automatic flash mode; you must only attempt the Manual mode option if Automatic flash mode or SSPL-Manual.exe already put device in SSPL tricolour screen and you got USB issues. any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
ModelID checking:
- if SSPL loader says it's for a different device, please contact cmonex in PM for testing SPL on that too. check modelid by entering SPL tricolour screen manually and note what it says (JADE100, or something else).
nothing happens on the device, does not enter tricolour screen mode:
- anyone having problems with the device entering SSPL automatically, please make sure you watch the device screen if it asks about running files. also try unchecking advanced usb functionality in settings.
- if it crashes instead of entering SSPL, you need to use Automatic mode.
general usb connection error problems if you get connection error in RUU after the device goes to 1.40.1000 screen:
- try manual SSPL: copy SSPL-Manual-Jade exe to the device and run it, then when it went to 1.40.1000 tricolour screen and shows "USB" at the bottom in this screen, use Manual option in the Hard-SPL program on the PC.
- make sure device was still synced via USB to the PC at the point of it entering SSPL (the 1.40.1000 screen)!
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but device still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
other issues:
- if Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- if device reboots instead of going to SSPL screen (1.40.1000), contact us by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!:
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
+1. [SIZE=+2]WARNING!!! do not flash 1.40 STOCK SPL on a 2.xx ROM!!!![/SIZE]
1. take the SPL relocker attachment, and run the EXE - this will flash 2.32.0000 stock SPL. simple as that!
(or if you want to manually pick an SPL version, then take a stock spl attachment (1.40 or 2.32), extract file and put it in customruu folder or any other ruu package and make sure you overwrite any existing RUU_Signed.NBH and delete any other *.NBH files in this folder)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 1.40.0000 or 2.32.0000. if 1.40, then stock ROM must be 1.40.xx too, if 2.32, then must be 2.32.xx.
credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> EXE program concept that runs on the PC, Hard-SPL concept,
cmonex -> new PC EXE & SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
Updates:
MOD EDIT:
Hard SPL V2 Uploaded for Olipro: Server issue should now be fixed.
EDIT by OliNex:
v2 removed, hardspl in it was not the final one. everyone who used v2 to flash hardspl, please update to newest one.
EDIT by OliNex:
v41: new Hard-SPL, 2.32.OliNex, you do not need to update this currently.
EDIT by OliNex:
v520: new Hard-SPL, fixes some stability issues, if you already have 2.32.OliNex from v41, you do not need to update this Hard-SPL.

Nice work again guys
I can now close all the request threads
*Stickied*
Ta
Dave

Touch 3G Hard-SPL
Touch 3G Hard-SPL, Thanks!!

i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution

in bootloader my device is
JADE064N
SPL-1.40.000
MicroP-Jade (led) v5

here the same
i will tray it from a other PC because it appears the second time, on the first i got something like "server not ready" but reading your post i guess it will also not help.
anyway thanks to the olinex and i'm sure they will help us later
huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse

yeah i hope so, maybe next version will help us
anyway thank you very much

It does not work
My jade is MODEID is jade100, but this hard spl does not work

hmmmm i tried it ... but first time he said Server not rechable try again later...
later he said that i tried it before and it seemed to be commercial ....
But i only unlocked my MDA 4 a long time ago ...
so my Jade German Version has no HardSPl snifffff...
Michael

GOOD WORK Mr. Olipro & Mr. Cmonex
I'll try on the Jade t3232 brown german edition today, and post
the result asap.
Anyone got an italian shipped rom? it will be much appreciated
in Italy i've seen the blue edition and the black edition, maybe they're suitable
for a rom dump...
c ya soon

huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5

jatekung said:
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
Click to expand...
Click to collapse
Same here...

Unable to install Enablerapi.cab and after that same as others peoples "hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"

Some here
Originally Posted by huysanhdieu
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution

Hi all,
The need of Server connection does not give me any confident.
Is there anyone having heard about such necessity during Hard Spl operation?
I think, it should be explained for the satisfaction of Jade owners.

Many thanx Olinex team... But unfortunately it seems that there is a problem with Jade-Hard-SPL_V1.exe
When I try to run it, it shows nothing...

For no_more_sm
If you are running windows vista, right click on the archive and then "run as administrator", the archive run properly but doesn´t work

my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
same here.
Anyway, I don't like the fact that we have to connect to the internet to do it, and I will not do it (given also that nobody reported having succeeded!)

huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only, we have detected that you appear to already have unlocked a device, if you wish to unlock commercially"
Click to expand...
Click to collapse
I have the same. Jade-Hard-SPL_V1.exe is not working on my device.
In bootloader:
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5

Program always say: "Server appears to be down..."

Unable to install rom

Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?

i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.

jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.

RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.

Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.

Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.

If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along

RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed