Database Develop

Think I have killed my dad's phone !! HELP

Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az

try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works

You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!

since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable

Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az

Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!

I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??

well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way

uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....

gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]

is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !

I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it

No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.

Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!

Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!

No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??

erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!

erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès

If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691

thank anyway,i will try it before tomorrow,cause i will send them my device for repair.

WM6 in other language than English ?

Palm released the WM6-Update in English now.
How long will they need to release the update in other languages, for example German ?
I asked Palm but they even have no planned release date they could tell ....................

wuffi said:
Thank you for contacting Palm(tm) Technical Support.
Your case number is: X-XXXXXXXX
You ask when the Windows Mobile 6 upgrade will be available for the generic Treo 750.
Unfortunately we do not have a date for the release, but the "coming soon" shoul mean about a month.
Click to expand...
Click to collapse
So updates in other languages seem to be far away ....................

Vodafone Austria has just released the german update >>> www.a1.net/treo

Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico

pls, give us a feedback
calico said:
Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico
Click to expand...
Click to collapse
Can u give us a feedback on such things as:
Are the alternate symbols working, i.e. umlaute like ä,ö,ü with on click, or do u still have to hit the navkey three times down to choose them?
What kind of branding does this rom offer? A1 or Vodafone splashscreen for powering on and off the phone? Any waste of storage, like program links known from the att rom?
I am really looking forward reeding u'r experiences.

The only branding in this Rom is the Vodafone logo at startup and shutdown. No additional crap and apps like in the AT&T one.To get rid of the Vodafone logo you could make the Treo vanilla by deleting the extrom as described in other threads here.To get the Umlauts just press the alt key.

After the vanilla procedure
CC-Cap : 000-000-001
Carrier DB: 251
Free memory
Data: 54.65 MB
Programs: 28.53 MB
Firmware and OS-build are the same as in the English Vodafone-Version.
The Software-Version remains unchanged.

Well, I cannot update. When I start the original Update I'll get the error, that the update isn't for my device. I have a REGULAR Treo 750 not the Vodafone branded one. So I know it's not the "right" one. Where do I get a patched RUU.exe or something?
I expanded the Updater .exe-File and started the T750URT.exe and he Flashed a ROM, and as there's only one, namely CHEEIMG_FW.nbh I thought I would have WM 6 on it, but I didn't.
So can it be, that I have to unlock my device? Or is it an other problem?

To upgrade you can use the SD-card method described in this forum.
Or try this one:
- start the updater, stop at the first screen
- look at your temp directory, there is a new folder created
- edit the file "payloads.xml", in the section "carrier codes" replace the 3 letters with the letters you see on your treos system info
- go on with the updater (start update)
good luck
calico

have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.

bezel said:
have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.
Click to expand...
Click to collapse
If you tell me how, I would surely make an image of my treo 750 without V before upgrading to wm6. I would also love to have an backup, but i got no idea how to do it. And there's no Information in the Wiki.

hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.

bezel said:
hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.
Click to expand...
Click to collapse
Couldn't find anything on the FTP regarding Dumping a Treo ROM.
Will search buzz's site but if I can't find anything there and nobody can tell how to dump, I will upgrade without a previous dump.

upgrade succeeded
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.14.VFD
Firmware-Version: 1.47.02.00
CC-Cap: VFG-VDE-013
everything is working fast and stable, sync with Vista and MDC 6.1 very fast, BT headphone Jabra 250 very good, UMTS/HSDPA with vodafone mobile flat very fast ...

OK, same for here:
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.16-RWG
Firmware-Version: 1.47.02.00
CC-Cap: VFG-DEF-003
everything is working very fast and stable, sync with Vista and MDC 6.1 very fast
Will test BT-GPS-Mouse and navi tomorrow.

i explain in this post why put your treo wm6 in all lenaguages!
http://forum.xda-developers.com/showthread.php?t=331024

Palm Treo750 ROM updates

For:
Spanish
English
German
French
Italian..
...HERE...

So... which update is this, and for some reason it doesn't take the serial number that is in my Treo.

I have just bootloaded it and this are the specs that came out:
ROM Update
Generic ROW
Firmware: 1.54.0.00 --> newer than 3AU
CC-Cap: GEN-ENG-005
Carrier DB: 296
WM6 version: 5.2.1239 (Build 17746.0.2.4)
Changes I noticed:
- the operator logo (when turning the radio on and off) disappeared! WOOHOO! Not that I minded the Vodafone logo since I do use a Voda sim, but incase I change sims, atleast now I dont have an operator logo..
- the click sounds have reverted back to being non-existent (which I think is the norm for WM6).. but I missed it from WM5 so I loaded the fix for the sounds..
- Band selection I remember was around 4 options, now there is only 2 - [1]GSM (900+1800)+UMTS 2100; [2]GSM(1900+850)+UMTS(1900+850)

Direct link
Anyone with a direct link to these?

invalid serial # ....somebody plz upload the link...

try this link for the English version

jho51e said:
try this link for the English version
Click to expand...
Click to collapse
Thanks for the link, downloading as I write. Will let you know how things go.

What's the SPL version in this updater?
EDIT: Answered my own question - it's the same as all other leaks/releases...bummer.

I have official Voda for my 750v. Simple question: does it worth updating with this one?
I mean if theres no significant difference it does NOT

unbranded eng here:
http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip

just so you know, this is the AT&T update we have all been waiting for... according to palm support

I Take That Back, After Further Question,, The At&t Update Is Still Forth Coming

My Phones Serial Number Won't Let Me Download It,, So I Used The Direct Link. I Try To Install And It Says Unsupported Device... Any Help?

Thanks to hb88xx link, i've been able to change the EN to FR in the direct D/L link and then I got: http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_FR_DesktopUpdater.zip
The French unbranded Rom for the Treo 750 (not V), not even available on http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=EUPalmSupportWKB_FR,ts=PALMEUWKB_FR,case=obj(2031)
Thanks a lot!

Here the direct links
Italian http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_IT_DesktopUpdater.zip
English http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip
French http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_FR_DesktopUpdater.zip
German http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_DE_DesktopUpdater.zip
Spanish http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_ES_DesktopUpdater.zip

I clicked on the updater icon and it kept saying error. Wondering if I need to unlock something. I updated mine to WM6 with the chetah through the memory card. Please help. Thanks

paypalbid said:
I clicked on the updater icon and it kept saying error. Wondering if I need to unlock something. I updated mine to WM6 with the chetah through the memory card. Please help. Thanks
Click to expand...
Click to collapse
You need to update via the SD method, search the forum for further details about it, there are hundreds of post.

so how do u update the sf version if u use the sd method?

Read up on the bootloader method (it's mentioned here quite a bit). Pretty simple:
- Back up everything important off the device as it'll all get wiped. Make sure your battery is well charged too (don't want it going flat mid-update)
- Extract the updater from the .zip file using Winrar or similar. Then when you get the .exe file, extract this as well - you'll get a whole bunch of files
- Look for a file called CHEEIMG_FW.NBH
- Rename this file to CHEEIMG.NBH and put it in the root directory of your memory card (make sure it's formatted in FAT32)
- Put the phone in bootloader mode (hold down the bottom side (PTT) button and the reset button under the miniSD flap together)
- The phone should then go into bootloader mode, detect the firmware on the card, and prompt you to install it by pressing the power button> Just follow the on-screen instructions, and soft reset when it tells you it's finished!

Thanks for your help Ben, after extracting the rar file and then extracting the exe. file I found the file that you were referring to. I guess last time when i downloaded the Wm6 it already has been extracted by the poster.

unlock mda vario III tmobile

Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all

dariob74 said:
Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all
Click to expand...
Click to collapse
i think u need this. http://forum.xda-developers.com/showthread.php?t=375583.if im wrong, apologise

dariob74 said:
Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all
Click to expand...
Click to collapse
First off to you and others, please remember that this is a library, not an HTC help line. You walk into the library and search the shelves for the volumes that you need, then you open them and search through for your answers.
You don.t walk up to the librarian get a library card, drop off a paper with questions and then say, " I will be back in an hour for the answers " What you are asking is Kaiser modding 101 and you should have searched yourself first.
Follow every step here, to unlock your phone
http://forum.xda-developers.com/showthread.php?t=433835

I have searched in the forum and I have performed all the information that I found ... everything works except the unlock of the phone, I requested further help because the rom installed is Italian and I do not know if there is some other step to unlock the sim ... thanks

dariob74 said:
I have searched in the forum and I have performed all the information that I found ... everything works except the unlock of the phone, I requested further help because the rom installed is Italian and I do not know if there is some other step to unlock the sim ... thanks
Click to expand...
Click to collapse
The rom has nothing to do with the sim. If you followed all the steps in mskip's tutorial, then your phone should be sim unlocked.
If you then flash an Italian rom, your rom will be in Italian. If you flash an English rom ,your rom will be in English. What exact result are you looking for ?

I'm trying to use the handheld with a sim H3G with Rom italian, I can use any rom it must be Italian also not original HTC (called rom cooked right? I am not expert on windows mobile) now you list what I did step by step :
1. I turn on the handheld
2nd when in windows mobile without sim and without the micro sd I connect to pc via usb cable, start KaiserUnlocker.exe, all three steps are completed successfully
3rd Restart handheld put the sim (at handheld off course) and I always Simlock top left on display.
4th I tried to copy the files on your handheld executable downloaded from xda forum, which unfortunately is English, but when I try to launch from the handheld, entering into windows obviously because I do not know how to start the executable in another way, I always say that not is the type of "phone" correctly, I tried one but more than anything, I would not have created a casino with the rom installed (currently there is RUU_Kaiser_HTC_ITA_3.29.408.0_radio_sign_25.83.40. 02_1.65.17.56_Ship)
thanks

Have you done everything here, step by step ? No shortcuts.
http://forum.xda-developers.com/showthread.php?t=433835

hello all ok I have solved, the three passages were always successful but ultimately unlock after 3 step came out on handheld combo from tick to accept the setting and the unlock code to unlock 00000000 thanks for the willingness and the help with your links
ps check the news of the 3 combo box I have not read anywhere I understood only by me
pps sorry for my schoolastic english

Please Help me to downgrade to WM2003

Hi, I have HTC Blue Angel running WM6.5 and find that it struggles to run at this level, i am looking to downgrade to the original wm2003 that it came with, I am on Orange UK
Current Seetings :-
Rom Version : 6.5.23004EN
Rom Date : 06/12/09
Radio Version : 1.15.00
Protocol Version : 1337.45
Extrom version : 23004-xplode
could anyone help and tell me excactly what files i need to download to restore to original shipped state and exactly how to carry out the downgrade.
Regards,
John.

welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony

Decided to go for windows pocket 2005
Thanks Chef_Tony im afraid im running vista and have tried using mtty but with no success, I have now decided to downgrade to pocket 2005, is this possible and how would i do it with windows vista as i am unable to downgrade to XP. Please help if possible.
Thanks John

Bootloader
Hi i dont know if this makes any difference my Bootloader is showing Version 2.05 Reagrds.

no, it does not make any difference, since the bootloader's version is not the problem. before you go on doing anything, you should have a good look at this site:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
and unless you are sure, the installation of the driver was successful, you should not attempt to flash the device, because then you will end up with a half-flashed device, that cannot be switched on and maybe also not flashed anymore.

http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?

I have the same problem, as i m downgrading to WM 2003, i followed all the instructions as u mentioned here, but when i run "maupgradeut_noid" it always said that this ROM is not for your device, i have Orange SPV M2000 (Blue Angel), please help i cant able to downgrade to WM 2003.
One more thing is there any way to Merge ExtROM with Storage in Windows MObile 6.5?

byudi23 said:
http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?
Click to expand...
Click to collapse
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now

subratamm said:
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now
Click to expand...
Click to collapse
still can't open http://firmware.atspace.com/Blueangel.html too

ok, we are dealing with several different things here:
1. the storage resize:
no, it can only be done in wm2003, no way to do it in wm5 or above, you have to downgrade
2. while attempting to downgrade, don't forget to put your device into bootloader mode, before connecting and starting maupgrade, then there will be no device error anymore.
3. of course for downgrading you need the original rom, at best from xplode's shipped rom archive, if you can't access it, just tell me your favoured language and country, and i will look it up and send you the direct download link. btw. xplode's site works fine!

favoured languange : English
Country : Indonesia
please send me the direct link. thx a lot. chef_tony

since he doesn't have indonesian roms and you are fine with english, here are the links of 2 different UK roms, you should be fine with.
T-Mobile UK WWE 1.42.00 1.42.112 1.13.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload)
O2 UK WWE 1.40.00 1.40.242 1.12.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload).
i hope these links work for you.

thx a lot chef_tony. I almost forgot. I want to ask whether the different rom can drain the battery fastly ? because my battery drain faster using WM6.5.

the power consumption of the device mainly consists of 2 things:
- wireless communications (gsm, gprs, bluetooth, irda, wi-fi)
- hardware usage (cpu & ram)
the wireless does not really vary from rom to rom but much like on the pc, graphically more intense applications use more power and since wm6.5 has a much nicer shell, it uses more ram and cpu to run. that uses more power.
if you want to save battery, reduce the backlight intensity, let the device switch off faster and end all applications that you don't need and de-activate wireless communications that you don't use. still then the battery life is limited but that is something you will have to learn to put up with.

thx chef_tony. I want to ask about the memory used ? is it better with storage 42mb and program 90 mb or repart it into default which is storage 60mb and program 60 mb ? is this RAM configuration also affect the battery consumption ?

no, that has nothing to do with that, because you don't resize the ram, you resize the extrom and the storage. that doesn't have any influence, kind of like the size of the sd card does not have influence.

Chef_Tony said:
welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony
Click to expand...
Click to collapse
THANK YOU VERY MUCH! It was very helpfull!

Showing white screen after hard reset
Dear Tony,
Since I wanted to get more space for my Xda iis tonight, so I install a unlock softwares to unlock the Extrom according to some indication on web, also I format it after scusseful to get a extrom, but I got a freezable white screen after using hard reset, the programe showing rom upgard scussefully but it cannot get into window: Could you teach me how to fix this problem? Can I save my xda IIS?
Thank you so much for your help.
Simon

please do not double post! i answered this exact question in the thread you opened for that.

thanks chef tony!