Related
Anyone know if Trinity can have TFLO working on it?
I imagine it would need a ROM upgrade. Anyone done this? Is it recommended?
I use my device a lot now in the car for satnav, so I'm looking for a way to make it as "finger" useable as possible.
Any other recommendations to make my Trinity finger friendly, I'd be most grateful. I already have spb mobile shell, which helps, but the scrolling feature doesn't work (which as far as I have read is a common problem with HTC phones).
Thanks,
Mattster.
Touchflo certainly does work on the Trinity.
I have flashed my Dopod D810 with Akeo's black 6.1 ROM and it has Touchflo.
I works well from what I could tell. I don't use it, preferring to use the stylus for a lot of things.
The ROM is very very good and well worth trying.
http://forum.xda-developers.com/showthread.php?t=390220
Hi Andych,
Thanks for the advice.
I tried that ROM (first time I've ever changed the ROM!) but it was way too complicated looking for my tastes. Gave me a chance to see what I was missing though, so thanks!
I'm boringly happy with my spb software. Simple but very practical, and that's what I need.
I did have to find a new ROM though, so I settled on "MARY v3.7 Super Lite" which has actually sorted an issue I had with the Today screen flashing up mid program.
BUT!!!!! I lost my Tomtom subscription to Speed Cameras AND my John Cleese Voice!!!
Is it true then that everytime you cahnge a ROM the device number changes, and therefore you lose e.g. Tomtom software that is reistered to the old device???
Hmm.... me thinks I should look that up in the forum later as all Tomtom said I could do was set up a new Tomtom account with the new device number and buy the software again! Damn!!!
Mattster.
Mattster_spv said:
Anyone know if Trinity can have TFLO working on it?
I imagine it would need a ROM upgrade. Anyone done this? Is it recommended?
I use my device a lot now in the car for satnav, so I'm looking for a way to make it as "finger" useable as possible.
Any other recommendations to make my Trinity finger friendly, I'd be most grateful. I already have spb mobile shell, which helps, but the scrolling feature doesn't work (which as far as I have read is a common problem with HTC phones).
Thanks,
Mattster.
Click to expand...
Click to collapse
SPB Mobile Shell does not have finger-scrolling, only animatin to swap screens. You need SPB Pocket Plus 4 for that.
Touch Flo and all variations are available in a lot of roms here in the Trinity forum. You should have read/searched a bit before asking this question, because there are already a lot of topics on this.
Good luck with the rom!
oVan said:
SPB Mobile Shell does not have finger-scrolling, only animatin to swap screens. You need SPB Pocket Plus 4 for that.
Touch Flo and all variations are available in a lot of roms here in the Trinity forum. You should have read/searched a bit before asking this question, because there are already a lot of topics on this.
Good luck with the rom!
Click to expand...
Click to collapse
Hi.
Yes, I meant SPB Pocket Plus 4.0, my mistake, and it's sorted now thanks.
As for the advice to "read/search a bit before asking this question, because there are already a lot of topics on this".... that made me laugh out loud as I spent all weekend researching the problem in xda and in spbclub forums. There are pages and pages and pages out there with people going crazy, Touchflo devices being the main problem. Thanks for trying to help though.
Mattster.
Mattster_spv said:
Hi.
Yes, I meant SPB Pocket Plus 4.0, my mistake, and it's sorted now thanks.
As for the advice to "read/search a bit before asking this question, because there are already a lot of topics on this".... that made me laugh out loud as I spent all weekend researching the problem in xda and in spbclub forums. There are pages and pages and pages out there with people going crazy, Touchflo devices being the main problem. Thanks for trying to help though.
Mattster.
Click to expand...
Click to collapse
Try the Trinity Mobile 6 forum here on XDA instead of the Trinity Upgrading forum, because that's where the action happens. You'll find a lot of custom roms with TouchFlo and variations.
Mattster_spv said:
I'm looking for a way to make it as "finger" useable as possible.
Any other recommendations to make my Trinity finger friendly, I'd be most grateful.
Click to expand...
Click to collapse
Use FTouchFlo v1.4.1 + FTouchFloConfig v0.9, or newest FTouchSL 2.7
tomme45i said:
Use FTouchFlo v1.4.1 + FTouchFloConfig v0.9, or newest FTouchSL 2.7
Click to expand...
Click to collapse
i am with you on that one, even for WM5. I have maanged to get an almost styluis free Trinity with the following:
SPB Mobile Shell, tweaked from this forum
iContact
PocketCM - alternative contact manager
ThumbCal
A_C's S2P - Media Player
A_C's S2V - Image Viewer
A_C's S2U - Slide 2 Unlock
Apart from MobileShell the rest can be found in the Developemnt and Hack sub forum here on XDA.
Just found this vid demo of Shell Mobile 2.1, lots of touch options I never knew existed!
http://vikrammaliwal.co.cc/spb-mobile-shell-21-update-available
With all this I have no real need for touchflo. Just shows, always read the instructions first!
Mattster_spv said:
Just found this vid demo of Shell Mobile 2.1, lots of touch options I never knew existed!
http://vikrammaliwal.co.cc/spb-mobile-shell-21-update-available
With all this I have no real need for touchflo. Just shows, always read the instructions first!
Click to expand...
Click to collapse
Thanks for link to this video. I didn't knew that MobileShell have so many cool options!
tomme45i said:
Thanks for link to this video. I didn't knew that MobileShell have so many cool options!
Click to expand...
Click to collapse
Glad you found it enlightening!
Feels good to give something back to the forum instead of just asking for help!
It is a rather cool find isn't it.
Mattster.
Hello!
Anyone know if there is a Stock exchange application on the Touch Diamond?
Just like the one in the IPhone.
Feltherre
http://www.sqmbl.com/
used it on the tytn, now on TD
works fine, somewhat small buttons on vga
digitalb said:
http://www.sqmbl.com/
used it on the tytn, now on TD
works fine, somewhat small buttons on vga
Click to expand...
Click to collapse
*sigh*
Im getting used to that response. Theres simply nothing new these days that works WITH the Diamonds VGA screen rather than against it.
Im seriously beginning to wonder why I bought a Diamond.
darthbane2k said:
*sigh*
Im getting used to that response. Theres simply nothing new these days that works WITH the Diamonds VGA screen rather than against it.
Im seriously beginning to wonder why I bought a Diamond.
Click to expand...
Click to collapse
I'm seriously beginning to wonder why you don't shutup. Stop moaning! You didn't even start this thread.
ljames28 said:
I'm seriously beginning to wonder why you don't shutup. Stop moaning! You didn't even start this thread.
Click to expand...
Click to collapse
Okay so whats the solution for the stock exchange app then? There isnt one.
There are no damn apps being developed anymore for WM especially on high end VGA devices.
I too would like a decent stock exch app.. if im moaning over nothing, point me in the right direction and i'd gladly shut up
Well it wasn't a good app.I better just wait for a better app to come a long.
digitalb said:
http://www.sqmbl.com/
used it on the tytn, now on TD
works fine, somewhat small buttons on vga
Click to expand...
Click to collapse
I can only see about 1/2 of the cells vertically. I guess it only works if you reduce your text size in windows... but then the phone itsn't finger friendly anymore.
yes,i also have that problem.
Try this:
http://www.pocketx.net/products/pocketstockmonitor_ppc/index.html
I used on my Kaiser and use in my Diamond...
Works perfect.
It has only one issue...
SOmetimes, when you starts the program, there is a fade on the screen... But you have only to press the power button twice and the programs goes well...
Would be great if HTC Home has a tab for stock exchange and share price update. HTC did it for weather, why stop there. Stock price should be next.
Yes,i agree. Hopfully a application that will work perfectly with the TouchFLO 3D.
Stock App Think Anywhare
I use Think Anywhere from Think Or Swim, its pretty cool, but is more than just quotes, Its a whole trading platform. Need subscription, but no deposit requiredment. You can do Paper trading with it.
http://www.thinkorswim.com/tos/displayPage.tos?webpage=wirelessPlatform&displayFormat=hide
Ok,il think i going to try it out.
Check out this video: http://tests.magnus.de/mobile/artikel/exklusiv-video-htc-touch-hd.html
It's the new Touch HD with HTC's Stock Market Tab in manilla! Who will be the first to port it on diamond?
Wow,that one looks really great. Hope somone can make it to the Diamond
Feltherre said:
Wow,that one looks really great. Hope somone can make it to the Diamond
Click to expand...
Click to collapse
its already happening, check out the development and hacking section. blackstone porting is going on right now. not done yet, but soon.
Blazeitup123 said:
its already happening, check out the development and hacking section. blackstone porting is going on right now. not done yet, but soon.
Click to expand...
Click to collapse
care to share the link mate? im dying to have stock tab on my TD
I have flashed the CT ver 6.2 Lite ROM. It has the Manila HD stock tab built-in. Works great.
Tried this
http://www.mobileblog.it/post/6476/ticker-tape-le-vostre-azioni-su-windows-mobile
Yeah- Ticker Tape is the way to go: http://www.fuzemobility.com/?p=460
I've used it...looks just like the iPhone app and it's easy to use and works well and was written for VGA
Hey, im sorry to post this.. im not even sure if this is the right section for this, but once again im sorry, but i just saw a youtube video(http://www.youtube.com/watch?v=J2sZYjhSrXY) and i was very impressed and would really love to get my phone to do that, (yes i have the att tilt). i tried using the search and didnt find much, and i was looking into the touchflo 2d/manilla stickey, and was intrested in doing that one as well but like i couldnt find a how to install, it was probaily in my face, but theres just so many links that i couldnt really understand what was going on. if anyone is willing to help me out a little, i would be in your debt.
thanks
this Touchflo 3d, where download??
Touch Flo 3D on AT&T Tilt
snorkle said:
Hey, im sorry to post this.. im not even sure if this is the right section for this, but once again im sorry, but i just saw a youtube video(http://www.youtube.com/watch?v=J2sZYjhSrXY) and i was very impressed and would really love to get my phone to do that, (yes i have the att tilt). i tried using the search and didnt find much, and i was looking into the touchflo 2d/manilla stickey, and was intrested in doing that one as well but like i couldnt find a how to install, it was probaily in my face, but theres just so many links that i couldnt really understand what was going on. if anyone is willing to help me out a little, i would be in your debt.
thanks
Click to expand...
Click to collapse
It's on a stickie at the top
Reports are that it only really works reasonably well if it is cooked into a rom. Try L26 or Anril´s roms that are in the ROMs section.
If you use the former you´ll need to install an excellent little tool by JeckyllHyde called TF3D Standby, which will ensure your phone can enter standby (the drivers needed for TF3D to work prevents this).
balleklorin75 said:
Reports are that it only really works reasonably well if it is cooked into a rom. Try L26 or Anril´s roms that are in the ROMs section.
If you use the former you´ll need to install an excellent little tool by JeckyllHyde called TF3D Standby, which will ensure your phone can enter standby (the drivers needed for TF3D to work prevents this).
Click to expand...
Click to collapse
thanks for the help!
Heh heh, that's my video. balleklorin75 is correct, however I am using MBarvian's Solace ROM and have TF3D installed on it. I do use TF3D Standby, as well. Otherwise the phone goes batty when you try and put it into standby.
dzelaya18 said:
Heh heh, that's my video. balleklorin75 is correct, however I am using MBarvian's Solace ROM and have TF3D installed on it. I do use TF3D Standby, as well. Otherwise the phone goes batty when you try and put it into standby.
Click to expand...
Click to collapse
hey can you add me to msn and help me install this on my phone?
how responsive is that setup because i noticed some lag when you were flipping through the music but im very interested in thats setup if its speedy
snorkle said:
hey can you add me to msn and help me install this on my phone?
Click to expand...
Click to collapse
I don't use MSN. I'll see if I have the .cab laying around somewhere on my laptop, along with the .cabs for the music and album. It's not really ready for everyday use, but it's fun to play with.
Johnster988 said:
how responsive is that setup because i noticed some lag when you were flipping through the music but im very interested in thats setup if its speedy
Click to expand...
Click to collapse
It's a bit laggy. That said, if we could get around the standby issue I'd use it as my default interface. I don't because it's so annoying to have to turn it off and on along with the phone, everytime.
dzelaya18 said:
I don't use MSN. I'll see if I have the .cab laying around somewhere on my laptop, along with the .cabs for the music and album. It's not really ready for everyday use, but it's fun to play with.
Click to expand...
Click to collapse
oh i see, then thats ok.. imma try to get the hyperdragon thing on my phone =D but thanks!
snorkle said:
oh i see, then thats ok.. imma try to get the hyperdragon thing on my phone =D but thanks!
Click to expand...
Click to collapse
You're probably better off going that route, as Manila 2D is much faster and easier to manipulate, just not as flashy.
TF3D was never really ready for prime time, it was just fun to fiddle with; but if you want, I'll find the cabs that you'd need for it. It is fun to turn off M2D and fire up TF3D every now and again just to show it off to someone, but it can't be reliably used as an everyday interface.
some help please!!! i don't know what to do...
hello my name is rui i'm from Portugal and i've a htc kaiser. i'm would love to put my kaiser working like a iphone and if possible with touchflo 3d like that video on youtube from dzelaya18, nice video by the way. i've made several downloads but i can't put them work in my kaiser. can someone please help me? please send me some links and tell me the way to install it on my phone. thank's.
by the way which programs are recomended to install on the phone?
ruitintin said:
hello my name is rui i'm from Portugal and i've a htc kaiser. i'm would love to put my kaiser working like a iphone and if possible with touchflo 3d like that video on youtube from dzelaya18, nice video by the way. i've made several downloads but i can't put them work in my kaiser. can someone please help me? please send me some links and tell me the way to install it on my phone. thank's.
by the way which programs are recomended to install on the phone?
Click to expand...
Click to collapse
Check out this link http://forum.xda-developers.com/showthread.php?t=337898 for software recommendations from other XDA members, however it depends on how you use your phone...gamming, business, video, music etc.......Also like dzelaya18 said in the post above yours, touchflo 3d is still being developed (i think) and requires a reset several times a day and is still very laggy...I would reframe from using it and go with Touchflo2....it is very nice and is included on almost every Rom in the Rom section...go there..I use Hyperdragon and PDA, both are good....
@dzelaya18 see what you started with your youtube video...ur famous...LOL...
Touch flo 3d for tilt
hope fully you should get it here http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser..........................
I was running the L26 ROM (which has touchflo3d built in) and I think that its good enough to use on a daily basis. Just so long as you remap the ptt button to toggle manilla on or off. I wouldn't use touchflo3D as a cab because I think that is too slow for everyday use. Well anyways if you wana try the ROM out for yourself its right here- http://forum.xda-developers.com/showthread.php?t=436446
-John
snorkle said:
Hey, im sorry to post this.. im not even sure if this is the right section for this, but once again im sorry, but i just saw a youtube video(http://www.youtube.com/watch?v=J2sZYjhSrXY) and i was very impressed and would really love to get my phone to do that, (yes i have the att tilt). i tried using the search and didnt find much, and i was looking into the touchflo 2d/manilla stickey, and was intrested in doing that one as well but like i couldnt find a how to install, it was probaily in my face, but theres just so many links that i couldnt really understand what was going on. if anyone is willing to help me out a little, i would be in your debt.
thanks
Click to expand...
Click to collapse
I have just added TouchFlo 3D to my AT&T Tilt... If you are interested i can show you how. i have all the files to help you flash the rom onto your phone.
^^ i'd would like to know how you installed 3d
please post link!
will sum1 PLEASE post a link for touchflo 3d/2d? PLEASE!?!?
Just SEARCH, the links are here on XDA! This is not a kindergarten classroom.
And no need to revive an ancient thread!
Hi...I ask me continuously: ' When and where can i find a rom that contains TF3D for my GT-8000???'....please....someone help me..
For the time being, maybe you have to search somewhere else... there is "some" solution out there in the net.
But, at the end of the day, this section here is so brand new... give it some time!
TF3D 1.3 is working like charm.... Find it @ Modaco...
TF3D 2.0 is out here
http://www.kingmobile.net/bbs/viewthread.php?tid=105514
Downloading now for testing
I have a copy of it on my server as well, link is in my sig. Have not tested it myself yet
will download to test
didnt understand a thing, the site isnt in english!!!
beppo89 said:
Hi...I ask me continuously: ' When and where can i find a rom that contains TF3D for my GT-8000???'....please....someone help me..
Click to expand...
Click to collapse
You can follow this procedure good luck
man2003 said:
TF3D 1.3 is working like charm.... Find it @ Modaco...
TF3D 2.0 is out here
http://www.kingmobile.net/bbs/viewthread.php?tid=105514
Downloading now for testing
Click to expand...
Click to collapse
so how's the testing?? any good?? please share it here since iam not member in kingmobile.net...
I used 1.3 version from madaco, still got a problem picture doesn't show on photo tab (i tried every solution that appeared on the board) anyone know how???
beppo89 said:
Hi...I ask me continuously: ' When and where can i find a rom that contains TF3D for my GT-8000???'....please....someone help me..
Click to expand...
Click to collapse
Hi..
i am , at the time being, the only one that released an Omnia 2 HTC Sense ROM... i have it published @ Modaco, but it's a Beta 1, and with lots of issues...
I am currently working on next version, that will be improved... it is pretty 'usable' but far from PERFECT...
As i've just discovered this new XDA section, i will also participate here if there is enough interest (although Omnia2 communtiy @ Modaco is huge at the moment, we'll see how this goes) ..
Hi guys,
you maybe haven't see that:
TF3D= http://forum.xda-developers.com/showthread.php?t=625234
Sense 2.1/2.5= http://forum.xda-developers.com/showthread.php?t=625439
Directly from a forum just near yours
rodrigofd said:
Hi..
i am , at the time being, the only one that released an Omnia 2 HTC Sense ROM... i have it published @ Modaco, but it's a Beta 1, and with lots of issues...
I am currently working on next version, that will be improved... it is pretty 'usable' but far from PERFECT...
As i've just discovered this new XDA section, i will also participate here if there is enough interest (although Omnia2 communtiy @ Modaco is huge at the moment, we'll see how this goes) ..
Click to expand...
Click to collapse
Hi Omnia 2 master, glad to see you here as well. You are the man to make Sense 2.5 happened on Omnia II
I am currently holding a Xperia X1, very much tempted to upgrade to Omnia II or HD 2. Size wise I8000 fits me best but the memory issue and without Touchflo kind of let me down.
em..... thinking and thinking....
man2003 said:
TF3D 1.3 is working like charm.... Find it @ Modaco...
TF3D 2.0 is out here
http://www.kingmobile.net/bbs/viewthread.php?tid=105514
Downloading now for testing
Click to expand...
Click to collapse
No rar3 included?
LeTo08 said:
Hi guys,
you maybe haven't see that:
TF3D= http://forum.xda-developers.com/showthread.php?t=625234
Sense 2.1/2.5= http://forum.xda-developers.com/showthread.php?t=625439
Directly from a forum just near yours
Click to expand...
Click to collapse
Anyone try this on there i920?
jv
How to INstall
How do I install your ROM on to my O2 i920 ?
Where is the omnia II tflo3d roms ???
Why there is no cooked roms for omnia II that contain tflo3d till now ???
amin 3 said:
Why there is no cooked roms for omnia II that contain tflo3d till now ???
Click to expand...
Click to collapse
Why don't you take a look at Enrico's and Rapid's roms (OmniaRom.com, proving grounds section)?
You mean this apps can install on Omnia 2 ??
LeTo08 said:
Hi guys,
you maybe haven't see that:
TF3D= http://forum.xda-developers.com/showthread.php?t=625234
Sense 2.1/2.5= http://forum.xda-developers.com/showthread.php?t=625439
Directly from a forum just near yours
Click to expand...
Click to collapse
devya said:
You mean this apps can install on Omnia 2 ??
Click to expand...
Click to collapse
Probably. But why don't use a rom 6.5.x with sense 2.5 cooked inside ?
http://www.modaco.com/category/424/i8000-omnia-ii-gsm-rom-discussion/
Yup.. i know that option too.
But i really don't know if i am really want to those HTC lookslike ..
I mean i rather chose Naked ROM, so i can chose any UI
LeTo08 said:
Probably. But why don't use a rom 6.5.x with sense 2.5 cooked inside ?
http://www.modaco.com/category/424/i8000-omnia-ii-gsm-rom-discussion/
Click to expand...
Click to collapse
Hi umm i was wondering if it was possible to make a topaz rom out of like the earlyest build of WM ever made for a phone like pocket pc xx that resembles Windows 9x... is that possible or at most ppc2003-2005 : )
chrispilot2293 said:
Hi umm i was wondering if it was possible to make a topaz rom out of like the earlyest build of WM ever made for a phone like pocket pc xx that resembles Windows 9x... is that possible or at most ppc2003-2005 : )
Click to expand...
Click to collapse
It would be possible but you would have to convert all packages to WVGA because WM6.1 was the earliest released on our device.
No developers would take it on as its a step backwards, so you would have to learn to cook.
Bruce Inman said:
It would be possible but you would have to convert all packages to WVGA because WM6.1 was the earliest released on our device.
No developers would take it on as its a step backwards, so you would have to learn to cook.
Click to expand...
Click to collapse
oh great,...i guess i will have to suffer never using ppc2000
Just curious, why would you want this? If you truly want to know, find a dell axim x5 on ebay for around $40-50, and fool around with it, but honestly, you're no missing much
cmstackar said:
Just curious, why would you want this? If you truly want to know, find a dell axim x5 on ebay for around $40-50, and fool around with it, but honestly, you're no missing much
Click to expand...
Click to collapse
i like topaz and i just want to see what it looks like on a resistave wvga screen
chrispilot2293 said:
i like topaz and i just want to see what it looks like on a resistave wvga screen
Click to expand...
Click to collapse
...and that's where all the work comes into play.
You would litterally have to redo every menu, font, aye!
Just get a magnifying glass.