im new to this so please be simple if you can help. i love my phone and i am really mad i cant get to anything. i would try to hard reset but i cant get to the start menu or anything. ive soft reset on multiple occasions but it does nothing
You don't have to be able to get to the menus to perform a hard reset.
Simply push both soft keys (keys above the 'E' and the mail icon on your pad) while performing a soft reset. You will then be prompted to push the 'Send' key and everything will be restored.
Welcome to XDA
Yeah, you can hard reset using the physical keys. However, the above method has never worked for my ATT Tilt. The method described in the wiki has never worked either. The method I use which works for me, is:
Press the two "-" softkeys on the front of the device while it is off
Then, while still holding the sofkeys on the front, press the stylus into the reset hole on the bottom for at least 3 seconds
While Still holding the two softkeys on the front, press the power button briefly then release it
You may release the softkeys once you see the warning message
Good luck,
Dave
Related
Can anyone advise how I can reset my device to the original state it came in the box. My previous device you had press 2 buttons on the keypad and the reset button. Anyone help with the Kaiser?
Thanks,
Sunny.
Settings -> Sytem -> Clear Storage
Make sure you have backed up your data.
gogol I am your new best friend.....many thanks!
Hold in two soft keys and then reset with stylus thats a true hard reset. Much more info posted in the first sticky in Kaiser Upgrading Thread
"true" hard reset? I think it is the same thing with that "Clear Storage".
Just read the manual and I did once.
Hi sunny
I hope this will help you:
HardReset: Hold Talk and End soft key - Reset :When prompted push Green Talk Button
Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus
Thanks Chris and others. Very useful!!!
Hi
My device has gone really wrong all of sudden. Keeps locking up, weird application corruption etc. I have taken out the battery a number of times. The phone boots up and seems to be ok, but if I slide out the keyboard nothing happens on screen. If I try and make a call the touch screen will not work to dial a number. Weird screen corruption. I thought this device was too good to be true.
I want to do a hard reset. HOwever not sure what the buttons are.
HardReset: Hold Talk and End soft key - Reset :When prompted push Green Talk Button
What is the "hold talk" and end soft key?
This will clear up any confussion i hope:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
I did the search, but not finding anything...Thanks for the help
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
austinsnyc said:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
Click to expand...
Click to collapse
This is the information I found... bu t I HAVE NOT been able to get my Tilt to Hard Reset from pushing any combination of buttons...
But this does work...
grizzley said:
you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Ron
I know this already. I am looking for combination of bottons + reset. As press softkeys + reset for 8525...etc
grizzley said:
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Don't forget about your good friend, WIKI.
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Jim_R said:
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Click to expand...
Click to collapse
interestingly, it does not work on my TyTN II.
However, its working on the Trinity.
It worked on my Kaiser/Tytn ll. Thanks!!!
not for me :-(
Hi,
maybe me being stupid, but this procedure does not work for me. Problem is that I installed software for the iGo bluetooth keyboard (I know ...) and ever since the Kaiser is resetting itself every 30 seconds. So what I get is only the smart mobility message, a short vibrate and then back to start. Anyone any idea how to get out of that? May I just press the wrong softkeys?
many thanks in advance
eRay42
new situation: the keys I press are definitely the right ones, I can also get into bootloader mode. I flashed the original rom (RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship) back which finished successful but the situation is the same. When I hard reset I am told it has been done, being asked to press the green button and it reverts to the old problem immediately. I should say that I have not modded my device so far, it was in original state before I installed the above mentioned software. Could it be a coincidence and it is a hardware problem?
HELP!!!
I found hard-resetting my HTC TyTN "GB" somewhat unpredictable. Holding down both soft keys while depressing the reset buttone is the correct procedure. It's either related to the HTC_END.cab. Do you have this installed?
Cheers
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
pietrucci said:
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
Click to expand...
Click to collapse
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
pietrucci said:
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
Click to expand...
Click to collapse
Pencil trick worked for me tooooo
reset
thank you..my tilt went crazy and won't bot...just keep restarting and turning off.
I had to use the pen and hold down
damn it now i have to restore everything
No still not working. These button things doesnt work. BTW does using Clear Storage give same effect, anyone?
I also haven't been able to perform hard reset on my TyTN II with the Soft Keys.. it just keeps rebooting! Can anyone help me?
Cumpz
LoL.. nothing like keep trying..
Already got it..
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
icum said:
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
Click to expand...
Click to collapse
It's in the Kaiser Wiki, under 'Kaiser resets'.
this is what is says...
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
* Press and hold both soft keys
* Using a stylus, press and hold the soft reset button at the bottom of the phone
* Keep all three buttons pressed until the keypad lights turn off and then flash
* Release the soft reset button while still pressing the soft keys
* Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
* Finally, press the green call button to perform the hard reset, or press other key to cancel
1. what buttons are the soft keys..
2. i pressed the power and the camera buttons then the reset set pinhole button.. release the reset pinhole button after the keypads lights go off still nothing..
I've searched the forums, and can't find a report of anything similar...so this might be new...if it isn't, help locating a thread would be great.
- Downloaded Blackberry connect install cab
- Seems to install fine (log looked good before reboot)
- Press "ok" to reboot device, but upon reboot, the device screen is locked at the Windows Mobile screen
The unit seems to be operating fine... I can receive calls - the phone rings, the caller ID pops up, but it stays on top of the Windows Mobile boot screen...
The power button will not shut the unit off...only turns the locked screen on and off
Battery removal and reboot freezes at same spot.
I had deselected all the ActiveSync options including the 'connect via USB' option... and now can't view my device from my laptop...
I've had the TILT only a couple of days...I'm running the stock ATT Tilt ROM & software...added two themes (night palms and the planet reflection ones)... have a 6G microSD card with some songs, pictures, and a device backup...
Looking forward to your suggestions & solutions!!
I tried it on mine and it did the same. So I gave up and did the hard reset and started over without even attempting to install the bb connect.
after hard reset
thanks for the quick response...
the hard reset worked fine...
I repeated the bbconnect setup, this time installing to the device instead of to my card... everything worked fine.
How did you do a hard reset on it?
hard reset
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
wprocter said:
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
Click to expand...
Click to collapse
One thing the instruction did not say rright was to hold the two soft keys and then press the reset then release and wait for the screen to give the instructions. Well the real way is to hold all 3 and wait and the process will be on its way.
wprocter said:
a hard reset will wipe all your data and set it everything back to the default status...it isn't supposed to clear anything on your sd card ... i take mine out anyway.
to do a hard reset, hold both the soft buttons while pressing the reset button w/ the stylus (the reset button is on the bottom edge under the hard OK button )
Click to expand...
Click to collapse
this is just not working for me, how long are you pressing the stylus in? how long are you holding the buttons?
When I do it I get the AT&T logo screen (a short vibrate) then it continues to the windows mobile boot screen. I can never get the prompt to erase all data. I've tried the procedure a dozen times, no luck.
Make sure you are pressing the soft buttons and not the 'call' and 'end call' buttons as stated on some sites. Hold those and press stylus into reset until it turns off. Continue holding the buttons until the message comes up.
I've just had to do this for exactly the same reason!
I had the same problem on my Touch. After the hard reset I have found a solution: install application to device memory not on storage card. That helped me and now BB Connect is working fine.
I press the power button and camera button while pressing the soft reset button. all I get is a 3 color bar screen that says serial. That's it...
Then I tried to use the clear storage app. I typed in 1234 and clicked yes. nothing happens.
I have htcs home / customier too. and ever since the install I can't fully turn off my phone using the power button.
help please. I just wanted the phone back to default. Not bloatware free.
wrong key combination dude, hard reset is the two soft keys, and then the soft reset button
Push and hold the two soft-keys, then HOLD soft reset until screen changes. It may take a couple attempts...
You're not kidding!!
I tried, same result.. tried again, and again... after about 12 tries it finally worked. Man what a PITA!!
Just persevere!
Luck
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars. I do have the kaiser tweak and HTC 5 button homepage thingy. The title bars didn't change right away so I turned the device off and on. Yet when i turned it back on, it freezes on the ATT startup page and displays the three different numbers on the bottom corner, i think they're some kind of IP or radio. Does anyone have any ideas on what is wrong with my phone? I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
chadwick47 said:
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars.my phone? ....
.....I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
Click to expand...
Click to collapse
I'm really surprised that a hard-reset did not restore you to OEM settings...
WHEN you get restored to where you want it... Try: http://rapidshare.com/files/68506785/UI_TWEAK.ZIP
It works awesomely!
It even catalogs all .tsk files and U can export as well.
Best of luck!
trb
just an FYI:
HTC Kaiser - TyTn II - T-Mobile Vario III
A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.
===> OR <===
Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
Not from me, credit:
http://www.4winmobile.com/forums/wi...ow-hard-reset-your-wm-device-device-type.html
Just to be clear, the soft keys are those two above the keyboard when the device is slid open....? right? Also should the device be powered on when I do this? How long to I have to hold down the buttons? Thanks for all the help!
Thanks I was able to do the hard reset, I didnt know the correct soft keys.