I have seen a few people remove the envelope so you can read more on the email preview. ITNV sent me 2 manila files and they worked like a charm. I'm using Herg's V6 Flip clock TF3D, so I haven't tested on stock Fuze or other TF3D themes. I would highly suggest you use Total Commander and back up the 2 manila files that are in your windows folder, then copy these to see if they work.
My basic steps, I used total commander, and looked in the windows director and found the 2 manila files and copied them as a backup.
77fb7fad_manila
21449ae5_manila
I went to settings, Today and turned OFF TF3D.
Then I took these 2 manila files that are the same name (and came from ITNV-Thank you) and copied them to the windows directory and clicked overwrite.
I then went back to settings, Today and turned ON TF3D and bam, the envelope is now behind the message, and I can read the a lot more than 2 lines. I've been looking for this for a while, hope it can help you as it has me.
Didn't Upload First Post
Sorry about that, they should be on this post.
cparkhorn said:
Sorry about that, they should be on this post.
Click to expand...
Click to collapse
The envelop was behind, however I only saw two lines of text still. Can post a pic and also did you do anything else beside replacing the files
Sorry
I got these files from ITNV, and he said he was pretty sure this got it done for him, no guarantees. Sorry if this didn't work. All I did was write these files over the files that were in my windows folder.
These are the files I had backed up before making the change. "I am using Herg Flip Clock V6" Not sure if the theme or TF3D you are using might make a difference.
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Edit: Seems to be working so I posted something on it here: http://www.fuzemobility.com/?p=1828
Thanks again
Worked as stated, thanks for the cab btw it made the process that much easier
Thanks for testing - those guys did the hard work of figuring it out...I just made a cab of their work
bugsykoosh said:
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Click to expand...
Click to collapse
This works Great! Thanks alot
bugsykoosh said:
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Click to expand...
Click to collapse
I saw your screen shot and I use the cab but I still only see 2 lines and at the part where I can get the body it says "click to view the message". I wish I knew why I can't get it to work for me.
Works nice on Blackstone !
Elodie said:
Works nice on Blackstone !
Click to expand...
Click to collapse
Oh no...that means I have to try this on my wifes phone
bugsykoosh said:
Oh no...that means I have to try this on my wifes phone
Click to expand...
Click to collapse
first....pray.
second...have yr things nicely packed close to the door, just in case..
Works great on Sprint Diamond! Great work as always!
KukurikU said:
first....pray.
second...have yr things nicely packed close to the door, just in case..
Click to expand...
Click to collapse
She won't let me install a registry editor on it (yet) which is literally killing me [I just want to see what's there]. I'll have to install it when she's showering or something and just remove the shortcut from the programs list so she'll never know
Thanks!! Works like a charm on my Rogers Diamond
man I really love this site. Best ever
lpsi2000 said:
I saw your screen shot and I use the cab but I still only see 2 lines and at the part where I can get the body it says "click to view the message". I wish I knew why I can't get it to work for me.
Click to expand...
Click to collapse
Same here on my Sprint Touch Diamond.
robotphood said:
Same here on my Sprint Touch Diamond.
Click to expand...
Click to collapse
you must have a different version of TF3D (or at least different manilla files in play). Did you confirm that you do in fact have these two manila files on your Diamond? I want to make sure it was overwriting a file and not just adding one new one and over writing one...
Thanx, this works fine with ROMeOS from monx 1.704 Ger Version...
Greetz
Boris
Issue Please see Screen Shot
bugsykoosh said:
you must have a different version of TF3D (or at least different manilla files in play). Did you confirm that you do in fact have these two manila files on your Diamond? I want to make sure it was overwriting a file and not just adding one new one and over writing one...
Click to expand...
Click to collapse
Hi
I have unzipped the files and pasted in Windows foler and then run the file but still the same issue : I have attach the screen shot : any help please
regards
mafaquem said:
Hi
I have unzipped the files and pasted in Windows foler and then run the file but still the same issue : I have attach the screen shot : any help please
regards
Click to expand...
Click to collapse
I am glad to see I am not the only with this issue.
Related
http://www.ujeb.pl/4070/
Any more info about it?
Thanks.
mtodak said:
http://www.ujeb.pl/4070/
Any more info about it?
Thanks.
Click to expand...
Click to collapse
Zip is attached, if that's what you wanted.
Jazzamataz said:
Zip is attached, if that's what you wanted.
Click to expand...
Click to collapse
Wow, quick one.
Thanks again.
PS. Any link with guide to it?
mtodak said:
Any link with guide to it?
Click to expand...
Click to collapse
Hahah!
(You're kidding, right?)
Just install and start using it...
It's very easy to use...
I love it...
(Except for the typo's: Frends instead of Friends and Conn Manager instead of Comm Manager But that we can change!)
And there a some bugs. e.G. it often crashes when you are entering too much contacts for quickcall. But at least a nice piece of software.
kkempe said:
And there a some bugs. e.G. it often crashes when you are entering too much contacts for quickcall. But at least a nice piece of software.
Click to expand...
Click to collapse
Any help with getting rid of evaluation version plz ?
Doesn't matter, piece of crap IMHO.
Here maybe some info on the use of the software.
final release?
Hi,
Anyone know when the final release will be available?
Regards,
Joao
@Joao; this is not a beta version but a trial.
lol so if you like it buy it . warez kills developers who spend hours developing on our behalf
There is a 15 day trial period and i have had it for 2 days. I like it. it is great for 1 touch voice dial or starting applications. Looks like i will buy it. it is only $15 bucks.
The only thing i want to know, is it can be executed by default instead of device comming up in the Today screen. I have the new ATT tilt (kaiser).
touch commander
There is a 15 day trial period and i have had it for 2 days. I like it. it is great for 1 touch voice dial or starting applications. Looks like i will buy it. it is only $15 bucks.
The only thing i want to know, is it can be executed by default instead of device comming up in the Today screen. I have the new ATT tilt (kaiser).
I tried it had fatal exception errors and I wish they were able to get touchflo incorporated to it. that would be nice instead of assigning a button to start it.
antnee said:
I tried it had fatal exception errors and I wish they were able to get touchflo incorporated to it. that would be nice instead of assigning a button to start it.
Click to expand...
Click to collapse
Hey i have it incorporated with touchflo just have to edit the touch flo's config txt to open the touch commander when u scroll down up it work perfect for me
soundworkspr said:
Hey i have it incorporated with touchflo just have to edit the touch flo's config txt to open the touch commander when u scroll down up it work perfect for me
Click to expand...
Click to collapse
can you explain how? that would be nice...
antnee said:
can you explain how? that would be nice...
Click to expand...
Click to collapse
yea seriously...how the hell did you do that?
Mine works...
Since I have Touch Commander installed on my card, I edited FTouchFloConfig.txt (txt file is in \Program Files\FTouchFlo on the device, not the card) to read:
DownUpApp:\Storage Card\Program Files\TouchCommander\TouchCommander.exe
DownUpAppCmdLine:
Then, soft reset device. Launch FTouchFlo. Manually launch Touch Commander to clear screen that asks for registration number, e.g. use it as a trial. Close Touch Commander.
Now, to make it work, I very lightly slide my finger on the Today Screen from the bottom to about a half inch from the top.
The sensitivity may have to be adjusted if it can be. Practice until you are used to it.
If I could get it to perform more consistently, I think this it is a great program. For now, I have remapped my PTT button to launch Touch Commander.
already been discussed !! and posted a CAB file which already had eFrost's touchFlo modified to it ..etc
http://forum.xda-developers.com/showthread.php?t=342715
still gives error due to it being a trial ..etc ... but the commercial (buy ) application will work fine ... version 1.02 !!
Search is your friends !!
Just trying to help.
UnicornKaz said:
already been discussed !! and posted a CAB file which already had eFrost's touchFlo modified to it ..etc
http://forum.xda-developers.com/showthread.php?t=342715
still gives error due to it being a trial ..etc ... but the commercial (buy ) application will work fine ... version 1.02 !!
Search is your friends !!
Click to expand...
Click to collapse
if you modify the pages one at a time and copy the files-appinf1.0.0, contactinf1.0.0, quickcalltree1.0.0, settings and thumbnalinf1.0.0 to another location and sofreset the device. then copy these files back to the folder and restart the program. modify a different page and repeat. this has the program working with all mods you have done i.e. contact pages, program links (with names and icon)etc..
worked for me.
i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
woow, does it work on any Device ??
I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.
Sensational find, well done
The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!
go into config cube and all word editing done from there.
found 6 side cube vista like and settings to change the programs
herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM
Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance
works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL
hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot
I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!
curious if it is possiable to add this to htc album. a major part of album app that is missing from the wm2003 edition of album. can anybody figure a way to add this feature. also i have not been able to find a way to install the old album on a wm6 device...any help on either of these issues would be greatly appriciated. thanks!
UPDATE!-here it is i highly reccomend giving it a try ...trying to get an english translation though! just unzip and place in program files folder! ALL CREDIT TO TWEAKRADJE!!!!!
Update2-once you have album4wm5 installed overwrite with the album exe that i've posted make sure you do not install the camera exe as this will mess up your camera. this update will translate the album to english. now i will try and get some help with the delete/copy/paste issues not working. NOW YOU CAN BROWSE ANY PIC ON YOUR PHONE ZOOM IN AND SET AS TODAY BACKGROUND!!! ONCE AGAIN ALL CREDIT TO TWEAKRADJE!!!!!
The ability to set a background thru htc album doesn't seem to be in there. It's only for showing off what WM can do ... I don't think its supposed to be useful! haha.
My device still has "Pictures and Videos" on it... Doesn't yours? I'm using the TouchIT rom, but I don't know what is in or have been removed from the OpenTouch roms ....
duprade said:
The ability to set a background thru htc album doesn't seem to be in there. It's only for showing off what WM can do ... I don't think its supposed to be useful! haha.
My device still has "Pictures and Videos" on it... Doesn't yours? I'm using the TouchIT rom, but I don't know what is in or have been removed from the OpenTouch roms ....
Click to expand...
Click to collapse
yeah, I have pics and vids with the option i'm talking about....but both pics and vids AND htc album are missing important features that the old album from wm2003 had. pics and vids can't zoom and save as to the today screen. u r just stuck with your picture as is for the today screen. htc album can zoom any pic but you can't save to anywhere. u can use for a contact but still not in the zoomed form. this all sounds kinda picky on my part i'm sure but if u have ever used...or get the chance to use album wm2003 u will see how good a program it is. thanks for your response and keep an eye and ear out for any help on these programs. thanks again!!!!!!
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
I've only ever used WM5 and WM6 .. so I don't know what you're talking about haha. But I'm interested in finding out... maybe someone else can extract them since Ivan is going thru a computer crisis at the moment.
ivanmmj said:
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
Click to expand...
Click to collapse
i found what seems to be what i am looking for, but i am having trouble getting anything to work. i moved these files to the windows folder. i am really not sure what to do with them. anyone feel like experimenting? i'm linking to the thread and files. check em out please... http://forum.xda-developers.com/showthread.php?t=300880&highlight=album+camera+cab
ivanmmj said:
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
Click to expand...
Click to collapse
i found what seems to be what i am looking for, but i am having trouble getting anything to work. i moved these files to the windows folder. i am really not sure what to do with them. anyone feel like experimenting? i'm linking to the thread and files. check em out please... http://forum.xda-developers.com/showthread.php?t=300880&highlight=album+camera+cab
Just copy the CAB in that post over onto your phone via activesync ... then open the file explorer on your phone, find the cab and tap it to run the installation.
Don't install that cab because it overwrites the camera software as well...
duprade said:
Just copy the CAB in that post over onto your phone via activesync ... then open the file explorer on your phone, find the cab and tap it to run the installation.
Click to expand...
Click to collapse
yeah, i have installed many cabs since frequenting this site the past few months. the icon for the album program i want appears in my programs list but when i try to open it i get the red x of death. this program cannot be opened because it is not signed by a trusted blah blah... or one if it's components is missing blah blah...any help???
ivanmmj said:
Don't install that cab because it overwrites the camera software as well...
Click to expand...
Click to collapse
i want the album so bad i figured i would deal with that later. i have installed many cabs since frequenting this site the past few months. the icon for the album program i want appears in my programs list but when i try to open it i get the red x of death. this program cannot be opened because it is not signed by a trusted blah blah... or one if it's components is missing blah blah... the zip has the files seperately . i tried dropping it into the windows folder but that didn't do anything either. have you ever used this album program ivanmmj?
I haven't used it, but I'm interesting in looking through it... I think, (again) that the best solution will be to decompile the ROM and look for all the needed files.
ivanmmj said:
I haven't used it, but I'm interesting in looking through it... I think, (again) that the best solution will be to decompile the ROM and look for all the needed files.
Click to expand...
Click to collapse
yeah, umm... thats a little beyond me.
still have my magician with wm2003se
could you guys possibly tell me what to look for that would need to be extracted? i would probably need to install total commander to investigate the files closer than what i could with file explorer... um...right?? i'm trying to help myself guys haha! oh by the way after installing that cab my camera still worked. but, when i dropped the files from the zip into the windows folder manually it did quit working. i got the files out and all is well. i was just excited momentarily to see the icon for this beloved program of mine in my program list. thanks again try not to forget about me..
Here is a skin I made for DxC's iphone dialpad, What do you think?
Dialpad:
My Today Screen:
install the .cab file below and then copy the files inside the .zip folder to your /windows directory then soft reset
**for SMARTDIAL**
close cprog.exe with a Taskmanager and copy etphone.dll in the v.3.b smartdial.zip to /Windows then soft reset
black dialer skin:
credit goes to dxc for the great dialpad
it looks great. will it have smart dial??
this is just a skin for dxc's iphone dialpad, and his dialpad doesnt have smartdial
looks great ill be downloading it thanks
make it a cab file please
so it can install both dialer and today screen
thanks
and it looks really good
take care
files added to first post
installed it on my tilt and doesnt work for me any ideas
neva dinova said:
installed it on my tilt and doesnt work for me any ideas
Click to expand...
Click to collapse
Did you copy the two .bmp files to windows?
GuySparkz said:
it looks great. will it have smart dial??
Click to expand...
Click to collapse
nice big and real finger friendly! does it have smart dial (T9) ?
OP, can you share how you did your homescreen?
first of all thanks for sharing...
I installed the cab file , and copy the 2 .bmp files to \windows folder and then I performed a soft reset(!) , but now I have the black iphone dialpad with only DELETE button replaced with the HTC one , I tried more and more but I can not see the silver dialpad ... where the prob. is?
Works great on a htc P3600 Trinity
good work... thx...
can you share Today,please...
islam is peace thats ...........................
Mod Edit: I have edited your comment because we actively avoid debating religious issues here. Hopefully we can all co-exist, respect each other and concentrate on discussing our phones. I had seen that members signature and thought it was not overly provocative but we may have to reconsider that view if others use it to start religious debates.
for me too only black pad no silver hm...
ghostofapril said:
first of all thanks for sharing...
I installed the cab file , and copy the 2 .bmp files to \windows folder and then I performed a soft reset(!) , but now I have the black iphone dialpad with only DELETE button replaced with the HTC one , I tried more and more but I can not see the silver dialpad ... where the prob. is?
Click to expand...
Click to collapse
ok my friend, i had the same problem, so the solution is as follows: before u copy the two bmp files, u need to rename the PcvDialerBkP2.bmp to PcvDialerBkP.bmp.
thats it, soft reset, and it worked for me
buy
nblakqori said:
ok my friend, i had the same problem, so the solution is as follows: before u copy the two bmp files, u need to rename the PcvDialerBkP2.bmp to PcvDialerBkP.bmp.
thats it, soft reset, and it worked for me
buy
Click to expand...
Click to collapse
yeah...that's it , many many thanks.
ooops, sorry you guys are right I changed the file name when I was drawing the graphics and I forgot to change it back, thanks for pointing it out, I fixed it now so you don't have to change anything
Yes, rename the black to 123
I got it figured. I went in and change the black dial pad with an additonal 123(so in case I want to reuse the dial pad again). Then I change the white dialpad to the same as the black one. Soft reset and done.
Great dialer thanks.
Can anyone post the original 2 bitmap dialer files? I forgot to back up mine.
Well I think its fairly apparent that M$ is not going to make a newer style native dialer for 6.5 so we may be stuck with the same dialer from the WM5 days.
Is anyone willing to redesign the layout of WM dialer? We have several different skins, but I think a new layout is whats needed for 6.5, perhaps to mimic the HTC dialer, or perhaps different.
Any takers?
Edit: I will update the first post and add in everything that we can come up with for easy access. Thanks to all who support.
+1 for this. Not sure if the layout can be chnged yet, but maybe some skin to make it look changed. Is there some existing skins for this somewhere already?
+1 for layout
jmckeejr said:
+1 for this. Not sure if the layout can be chnged yet, but maybe some skin to make it look changed. Is there some existing skins for this somewhere already?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=434934
+1 for the layout change though. There is some unused space at the top that I don't like. The number buttons are not quite finger friendly either. IMO.
Maybe we coud post a zip with all the stock images and reg entries to make it easy on skinners. Can someone put together a zip with all of this stuff and Adam can link it in first post?
I will most likely have a look at this too, but busy at the time being. I'd like to make it look like the HTC dialer, and then go from there.
Not sure if this is the same dialer, but there are a few skins for stock dialer at www.skinzone.org. They were from 6.1, so not sure if they would still work.
EDIT: I gathered up the images real quick, but didn't get the registry yet. Let me know if you think I missed an image.
jmckeejr said:
and Adam can link it in first post?
Click to expand...
Click to collapse
Sure thing, I will update the first post and add in everything that we can come up with for easy access. Hopefully people will see that something is being done and will join in. It may not hurt to contact some good people with photoshop skills either like Herg and bilbobrian.
Edit: After thinking about it, we may get better coverage if this was moved to the Development and Hacking forum.
I wish they would make the dialer the same as how they have the dial pad for the lock screen...that would be sweet if somebody could make a skin or dialer like that:
http://www.blogcdn.com/www.engadgetmobile.com/media/2009/02/windows-mobile-65-ofc10.jpg
Somoene skinned the HTC dialer to match the buttons in 6.5 and it looked really good.
http://forum.xda-developers.com/showthread.php?t=509447
AdamNimrod said:
Somoene skinned the HTC dialer to match the buttons in 6.5 and it looked really good.
http://forum.xda-developers.com/showthread.php?t=509447
Click to expand...
Click to collapse
That looks great, I just wish the HTC S2A dialer didn't have issues with WM6.5
i'll take a crack at it later tonight after work...its been bugging me too.
That would be awesome... and I know we can expect something good from you, you always seem to post top knotch applications/themes/tweaks.
Hi,
Attached is something that I quickly knocked up to make the WM6.5 dialer look a bit more like the lock screen when in a call.
I hope that it is useful.
Matt
noobness clueless
mpattman said:
Hi,
Attached is something that I quickly knocked up to make the WM6.5 dialer look a bit more like the lock screen when in a call.
I hope that it is useful.
Matt
Click to expand...
Click to collapse
Matt, what is the file attached. I noticed the different default theme pictures in the folders, but I am not sure how this file should be used. Is it a program that allows you to choose a theme? If so, which file to you run and do you run from pc over activesync or from the device itself?
If you extact it on your PC, the directories are for cooking and if you run the "make_cabs.bat" you should get a folder called cabs with installable cab files that will change the phone's skin. You need to soft reset to get the phone to use them after you install the cab (or copy the files over in Resco Explorer from the folder of your choice.)
(see attachments - I am using the Blue Drop theme)
big thanks
mpattman said:
If you extact it on your PC, the directories are for cooking and if you run the "make_cabs.bat" you should get a folder called cabs with installable cab files that will change the phone's skin. You need to soft reset to get the phone to use them after you install the cab (or copy the files over in Resco Explorer from the folder of your choice.)
(see attachments - I am using the Blue Drop theme)
Click to expand...
Click to collapse
Yes!!!
That alone makes a BIG difference. Thanks!
I dont get a folder called 'cabs'.
I hate to admit...
AdamNimrod said:
I dont get a folder called 'cabs'.
Click to expand...
Click to collapse
I hate to admit that the same happened for me. I ran it three times...then I thought about it. And I refreshed the window.
I doubt this is your problem, but I had to put it out there.
just to let everyone know, i am working on something, I'm toying with going with squared-off buttons (see 6.5 calc for an example) or the lockscreen-esque rounded buttons (similar to mpattman). should have some time this weekend to really polish it.
Rounded buttons.
I still cant get the damn cabs to show...
http://forum.xda-developers.com/showthread.php?t=508920 this what you are looking for?
AdamNimrod said:
I still cant get the damn cabs to show...
Click to expand...
Click to collapse
Not sure why it won't build the cabs, is there an error message?
Attached are the VGA cabs.