Database Develop

Cingular (AT&T) Video in the States

Has anyone been able to get onto AT&T's (Cingular's) Streaming video site with their unlocked TyTN II here in the States?
http://cingularvideo.cingular.com/
It does not detect the phone as a 3D phone, or so it says.
I had no problems getting to the http://device.home/ page though.

I just get a blank, white screen.

doesn't work for me either... Same error. Not a 3G phone.
-Mc

isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
This link has a 8525.cab that allows you to get technical difficulties (for me at least, i don't have wireless.cingular.com:80 set as proxy)
http://www.gadgetech.info/treo/hacks/registry/
shogunmarks cab with realplayer could be your huckleberry too
http://forum.xda-developers.com/showpost.php?p=1095177&postcount=51

doesn't work for me either.

zetajunkie said:
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
Click to expand...
Click to collapse
I dont remember the exact change (been a while) but yeah look in the Hermes forum....also you will find MANY threads so look for the newer ones as ATT and WM6 went through stages of what works for this. It is a PIE issue.

Read into the first dozen posts or so:
I don't live in a 3G area so I can't test...
http://forum.xda-developers.com/showthread.php?t=282651
-Mc

I got it too work, no problem. Below are my instructions.
TyTN II Users
Here are the instructions for access MediaNet and Cingular Video, or just about any at&t/Cingular link just like on the Tilt.
It’s really simple to access MediaNet. Even on at&t branded phones you have to switch from My ISP to MediaNet so you can access the MN home page or Cingular video. Here is how you do it.
Go to START, SETTINGS and select CONNECTIONS.
In the connections, select CONNECTIONS Icon.
At the bottom, select ADVANCED tab.
You will see a SELECT NETWORKS option.
Under Network Management, change the first option for MY ISP to MEDIANET.
Now click ok and reselect TASK (bottom left tab). Now your Connections now say MediaNet with a proxy option below it. We need to verify the proxy info is correct.
Select edit my proxy server, then select Advanced. You will see a window with server/proxy info. The first one is HTTP. It should have the following (wireless.cingular.com:80). If it doesn’t, select HTTP and enter the info. Now check SOCKS. It should have (LOCALHOST:1080). Again, enter it if needed.
Now you’re done. You only had to do this one time. When you done with MediaNet, all you do is switch back to MY ISP for normal surfing.
Before you continue, you have to make a change in your registry so that the proxy knows your phone as a branded phone. I choose the Tilt for this.
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
This is what is listed for the Tilt
Save your settings and that’s it. By changing that info on my TyTN II, I am now able to access Cingular Video and MediaNet home page. I had to change my connection from My ISP to MediaNet so it would go through the Proxy.
I can now access my account information and a bunch of other areas I wasn't before on my TyTN II.
Cv http://cingularvideo.cingular.com
MN http://device.home
Note: In order to play the videos, you can download a PocketPC version of Real Player since the files are in RM format.

Does your HTTP setting stay?
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet. I went back to the http setting and learned the http setting to wireless.cingular.com is not there anymore. Looks like it doesn't want to stay there.
I changed my registry to make it think I am using an AT&T Tilt instead of the HTC TyTN II.
Can anyone help?

Got It Working
I only had to do this on my HTC ADVANTAGE...
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0

MEdia Net Proxy info
I believe that the proxy info for the MEdia Net as ISP is hard coded into the ROM as it was for the Hermes.
So all you would really need to do is revise the "model" info for PIE in the registry to what they said earlier.

Do you need to do something to get RealPlayer to stream the video? I'm able to get to the video pages, but when I try to play them, they download instead (wow, there goes all my RAM!)
I did find that this only works in IE, my Opera browser still gives the error page for Cingular Video.

Read what I posted here. http://www.mobileplanet.com/ft.aspx?k=99281
When you select a video to play, it downloads a video.ram file, which contains nothing but a URL. Real Video opens this video.ram file, reads the internet URL, and then plays the video from that URL.
Note: Each time you select a video from the web site, it'll download and overwrite the last video.ram file you downloaded/saved.

Okay, changing the network settings on RP seems to have fixed it.Thanks for the great guide!

victorcho said:
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet.
Click to expand...
Click to collapse
Check your e-mail accounts. POP/IMAP accounts allow you to set the connection they will use. If they don't match "Media Net" and go out to check e-mail, you'll get this error because the mail doesn't think the network's available.
There's also a setting in RealPlayer to specify the network that I had to manually change. Once I did all that, I was watching The Colbert Report clips on my phone.

ha im an idiot i was getting the temp difficluties screen but i was connected to wifi took it off and im fine that was dumb but i just tried a video and got failed to connect! lol well ill see if i did somethign else dumb lol
switched the real player settings to mn and were all good

That fix worked for me! I am able to surf/check e-mail while using the MediaNet connection - is there any real need to switch connections all the time? It seems about as fast as my non-proxy connections, but perhaps it isn't.

i can get the list of videos playingm, but when i click on it to watch it, it says " can not connect" real player......how can i change this

any still having problems with real player here u go
Go to ur tmp-file folder (normally "C:\Documents and Settings\%username%\Local Settings\Temp\"
u will find quite a lot of folders in there, but if u search (f3) for files ending with *.cab there will pop one file named:
"realplayer.cab" ^^
copy it to ur ppc by using active sync
this worked for me hope for u too

I have tried all of these things and it still tells me the clip is unplayable.

Trying to get Vodaphone Live to work on HTC branded TytnII

Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony

Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.

kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...

Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'

nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html

I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?

Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!

It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live

Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!

Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.

app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...

Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.

The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference

I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...

Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.

Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks

Kaiser Rom and Tilt

I haven't seent this problem mentioned anywhere and I've done a search so if its here and I missed it pardon me in advance.
I have a Tilt and was using telenav and I actually like it. The other week I flashed a Kaiser rom and really like the way it looks compared to the Tilt. Anyway I was reinstalling all my apps and games and stuff getting it the way I liked. Downloaded and reinstalled Telenav went to start it and when it tried to sign on to the internet I kept getting "cannot connect for an unknown reason check your settings and try again". I noticed when it was connecting it was trying to use my isp or att isp I can't really remember now.But when I used internet explorer it used Media net.So iwent to settings and checked it out it showed my isp tried but media net was nowhere in there.So I tried to add that but when I started it said it was already there and wouldn't let me addit. So I went back to the AT&T rom and telenav works fine connects using MEdia Net just like everything else. I know I could use Garmin,Tom Tom or numerous others,BUT this has now become my Golden Fleece I am on a quest and won't give up till I can make this work any help would be greatly appreciated by my sleep and sanity.

If all your wanting is the look you can keep the Tilt ROM and and just change the following to give you most of the look. Its basically what I use:
New HTC Default black theme ( RapidShare )
http://rapidshare.com/files/42715039/Htc_New_Default_theme.zip
HTC Kaiser Comm Manager FIXED( RapidShare )
http://rapidshare.com/files/42771601/JUVS_HTC_CommManager_Kaizer_Fix.cab
Kaiser Dialpad (reTOUCHed_Dialer2.cab)
http://forum.xda-developers.com/attachment.php?attachmentid=53559&d=1191898754

telenav htc rom fixed
tap start
tap settings
tap connections tab
tap connections
tap set up my proxy server
uncheck this network uses a proxy server to connect to the internet
leave this network connects to the internet checked
tap ok
tap advanced tab
tap select networks
both should be set to medianet
tap edit on the top/bottom (both are the same settings
tap edit... again
tap next
enter wap.cingular
username [email protected]
password CINGULAR1
tap finish
ok out of all screens
soft reset by pushing the reset button to the top right of the usb port with your stylus.
If that doesn't fix it then you are beyond my knowledge of the subject. Oh yeah, don't change your com # from 4.
Let me know if this helps
D
*typed from my att htc flashed with telenav.*

I'll add this to the all-encompassing Tilt thread at the top. Thanks for bringing this up.

I just flashed to the HTC ROM but don't know where to downlaod the TeleNav software. Can someone point me to a link?

WinMobNut said:
I just flashed to the HTC ROM but don't know where to downlaod the TeleNav software. Can someone point me to a link?
Click to expand...
Click to collapse
Go to the stickied "list of the latest cabs for kaiser" and scroll down to the cingular cabs...90% sure its included with the cingular cabs...here is your one freebie http://forum.xda-developers.com/showthread.php?t=332438

Where to download TeleNav directly to tilt kaiser TyTn II htc 8925
Go to:
ota.telenav.com/att/tnn

Is there any freeware for Telenav on the Tilt
than paying $10 per month
like we did on the Mobi Tv & Xm Radio

Telstra NextG - My Place / Foxtel ?

Anyone managed to get Foxtel (or even Telstra My Place) working on a Kaiser / Tytn II?
I've attempted to install Default_i-mate_MyPlace.cab (with or without Telstra_V5.5.CAB) from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 but it fails to install, reporting nothing other than "Installation was unsuccessful".
I've tried this straight after a factory reset too. The ROM is the default one it shipped with - 1.82.707.0 WWE (11/03/2007)
From what I've seen posted by others, it 'should' be as simple as installing the MyPlace cab then changing a registry setting, but I'm not having any luck with even the first part!
Anyone run into similar problems, or able to assist?
prk.

telstra cab
If you install the latest Telstra ROM then use schaps utility to unlock the extended ROM and copy the contensts somewhere you can then install the TELSTRA 5.5 cab. You will probably also need another cab called Default_Imate_AUS_HR_V3.60.00.cab. I have SCHAPS 4.01 FULL with both of them installed and everything is fine. Contrary to some threads I have flashed heaps opf ROMS and I love my JASJAM, being a tech nerd of course.

Finally got Foxtel working on my Kaiser (Tytn II) with Telstra NextG.
The main problem I ran into was when downloading the files from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 I was right clicking and selecting "save as". This doesn't work, as the link heads off to Rapid share, where you have to click free, then wait a while, etc. Silly me.
In case anyone's interested (or for the next time I reset):
1) Install the Default_i-mate_MyPlace.cab (approx 70k)
This gives the "My Place" option in the Programs list. When I ran it and tried to go to any of the options, it would connect, then timeout on finding location.
2) Ensure the Telstra Internet connection is using a proxy:
Start / Settings / Connections / Connections
Under "Telstra Internet Settings" select "Manage existing connections"
Under Proxy Settings, tick "This network uses a proxy server ..."
Advanced / HTTP
Set server to "10.1.1.181" and port to 80
Okay out.
At this stage I could now go to the various locations in Telstra My Place. Except Foxtel which gave an error about not having a compatible phone.
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
Now I could load the foxtel link. When I tried the free service, streaming media told me it couldn't connect.
4) Configure streaming media:
Start / Programs / Streaming Media
Menu / Options
Set "Connect Via" to "Telstra Internet Settings"
Voila - Foxtel now works.
prk.

prk said:
Finally got Foxtel working on my Kaiser (Tytn II) with Telstra NextG.
The main problem I ran into was when downloading the files from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 I was right clicking and selecting "save as". This doesn't work, as the link heads off to Rapid share, where you have to click free, then wait a while, etc. Silly me.
In case anyone's interested (or for the next time I reset):
1) Install the Default_i-mate_MyPlace.cab (approx 70k)
This gives the "My Place" option in the Programs list. When I ran it and tried to go to any of the options, it would connect, then timeout on finding location.
2) Ensure the Telstra Internet connection is using a proxy:
Start / Settings / Connections / Connections
Under "Telstra Internet Settings" select "Manage existing connections"
Under Proxy Settings, tick "This network uses a proxy server ..."
Advanced / HTTP
Set server to "10.1.1.181" and port to 80
Okay out.
At this stage I could now go to the various locations in Telstra My Place. Except Foxtel which gave an error about not having a compatible phone.
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
Now I could load the foxtel link. When I tried the free service, streaming media told me it couldn't connect.
4) Configure streaming media:
Start / Programs / Streaming Media
Menu / Options
Set "Connect Via" to "Telstra Internet Settings"
Voila - Foxtel now works.
prk.
Click to expand...
Click to collapse
Hi im extremely new to this stuff.and sorry for the Noob question.
I am upto the part of the registry key. I cant seem to find the registry key that i need to change it. Could you give some type of instruction on this. Ill keep searching in the mean time.
Thanks for your help
Frank
Got it going. Thanks. Had to reset unit.
Big thanks

I-Mate Cab Installation
Hi,
could anyone please tell me (or point me to a link) how to install Cabs on an I-mate 9502.
I need to access Telstra's Myplace after installing windows 6.1.
I have downloaded the appropriate cab onto my pc, and then transferred it to the storage card on the 9502, but I cannot instal it onto the 9502.
I am a beginner with the 9502, and would appreciate any help.
Many thanks
Paul

Hey it's ok. I finally worked it out!
Cheers
Pauyl

Hey Pauly,
what did you do? I just got 6.1 and am lost. I got the configurator cab (correct one?) off the imate page but little does it config. No My Page or Foxtel etc. BTW I couldn't find a My Place cab.
Teddo

How do i get my data connection back..

Okay, i just flashed RomeoS 4.1 onto my AT&T tilt. How do I get my 3g data connection back? I can use my LAN WIFI to go on the interent, but not the 3g line. There has got to be something simple I am missing! help

Did you run "Connection Setup".
I don't have RomeoS ROM, but it should be here:
Start>Settings>
>Connections Tab
>Connection Setup
run that and it should set up the correct settings for your network.
The other thing you may need to do is:
in the same place as the "Connections Setup" there should be a "Connections" Icon.
>Connections
>Manage existing connections
>Proxy Settings
>make sure "this network uses a proxy server to connect to the internet" option is UNCHECKED.
I hope that does the trick for you. It the only thing I can think of.

Run HTC Connection setup and DISABLE proxy

thanks for your suggestions, i will try this today!

still doesn't seem to work. I would assume that every single time anyone flashes a new rom, they have to setup their data connection again, right?

It'll work for sure, as suggested above, use Network Wizard or the HTC Connection tool, both do the same thing and the cabs area available on XDA-Dev.
And yes if you re-flash your ROM you'll need to set your Data Connection settings again as they are formatted when you ROM upgrade.

I had the same issue when i installed that rom, theres a cab called Cingular PDA Medianet mms and one called wpbear_AT&T_proxy there on this site if i wasent on my phone i would link you

wpbear_AT&T_proxy
Click to expand...
Click to collapse
Don't like it... however pending on your flash history and what you installed you may have to check a reg entry
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
If it reads TNETW12511 you're OK

downloading those cabs worked like a charm! thank you very much!