Hi all,
I had a problem last night where i was testing out the alarm feature. It went off and a small dialogue box popped up and the left button stated 'dismiss', i clicked somewhere other than those areas and then the alarm bell icon went away and the alarm had entered snooze mode - it kept going off every minute or something and there was no way to turn it off.
can anyone shed some light on this if the icon disappears?
also how can i change the alarm tone? going into the sounds and notifications option i get:
''Enable sounds for:
- Events
- Programs:
--Notifications (alarms, reminders)
- Screen taps
- Hardware buttons''
on the second tab called notifications
theres options for ''Event'' allowing to choose an event to assign a sound for it. Theres no Even called alarm or notification but there is one for Reminders. I changed the reminders tone but still that didnt change the alarm tone that went off.
seems the alarm hasnt had much focus during implementation.
thanks,
simba
Change the alarm tone directly on the Clock & Alarms screen. Just tap the little yellow bell thing.
perfect thanks! i didnt know the wee bells were selectable for more features.
anyone else know the solution to the other query?
simba2585 said:
Hi all,
I had a problem last night where i was testing out the alarm feature. It went off and a small dialogue box popped up and the left button stated 'dismiss', i clicked somewhere other than those areas and then the alarm bell icon went away and the alarm had entered snooze mode - it kept going off every minute or something and there was no way to turn it off.
can anyone shed some light on this if the icon disappears?
also how can i change the alarm tone? going into the sounds and notifications option i get:
''Enable sounds for:
- Events
- Programs:
--Notifications (alarms, reminders)
- Screen taps
- Hardware buttons''
on the second tab called notifications
theres options for ''Event'' allowing to choose an event to assign a sound for it. Theres no Even called alarm or notification but there is one for Reminders. I changed the reminders tone but still that didnt change the alarm tone that went off.
seems the alarm hasnt had much focus during implementation.
thanks,
simba
Click to expand...
Click to collapse
the exact same thing happened to me too. feels like another bug.
Hi!
I have searched the forum, but I haven't found this...
So:
My alarm does work very badly, the sound does NOT repeat, the vibration does start only once and only when the phone is set to normal mode. All this depsite I have all these set to on:
"Sound alarms even when the device is set to silent or vibrate"
"Repeat sound"
"Vibrate".
I have ROMeOS 4.21.1.
Is there other solution than to use a third party application?
Thanks
Does anyone else find the alarm clock sound and volume controls virtually useless?
For example,
On the stock alarm, if you enable the "Smart alarm" option, you can choose a tone from Morning, Breeze, Mist, etc.
The problem is, regardless of what I choose there, it always plays whatever was chosen in the Sound > Alarm tone option - it seems to ignore the "Smart alarm" option altogether.
The other problem is that the volume control seems completely useless. Even at the lowest volume setting, the alarm tone is still rediculously loud.
I've tried the 3rd party app "Alarm Clock Plus" and it has the same problem with volume being way too high and it does not gradually increase the volume. Obviously it IS capable of doing increasing volume because it worked for me on the Galaxy I7500.
So it seems like a hardware/firmware bug in the Galaxy S (at least with 2.1)
Can anyone explain to me how to use the smart alarm feature or is this bug fixed in 2.2?
I can't help you with the smart alarm. But I can with regards to the volume of the songs for something like alarm clock plus. I had the same issue, setting the volume to it's lowest setting but finding it way to loud still.
I used Audacity to reduce the gain of the song I wanted for my alarm so that it naturally played softer, now it's perfect in another alarm program.
Hello all,
I have noticed the following issues.
1. When using the built in Android alarm in conjunction with automatic "do not disturb" rules, the alarms only works for a couple of days. After that, it will not go off. I must turn off and then back on to get the alarm to sound in the morning.
2. When I use the huawei alarm in conjunction with automatic " do not disturb" rules, the alarm will never sound. If I unlock the phone, then the alarm will go off. I have ensured that priority notification was wet in the alarm settings and from the app menu.
If I "must" wake up, for example for a flight or something, it is impossible to trust the P20 Pro. I need to fire up my old iphone to make sure my alarm goes off. The last flight I had last week, the iphone saved me because the P20 wasn't interested in sounding the alarm.
Anyone else have these issues?
Yes I have the same issue! Very annoying
Kinda disappointed as I thought I've found the perfect phone
I have to make sure my DND mode ends before my alarm to make it work. The alarm override option in DND does not work
Fixed!!!
Go to Settings > Apps & Notification > Apps > Clock > Notifications
And turn on "Priority Display"
Now it works!
Your DND setting must be Priority. Doesn't work with alarm only.
There is so much do not disturb customization in this version of android or perhaps specific to oneplus. I am not sure which. That I'm not sure how to make this do what I'm used to it doing on my previous device LG G4. During the day I have it more or less as follows I may be forgetting some things:
Only ring if the phone call is from someone in my contacts.
Text messages always sound etc no matter who sent them.
Email always sounds.
Calendar always sounds.
What I need is the profile to silence everything while I sleep. To do this on the LG G4 I had a sleep profile from 12am to 12pm that set all volume controls to zero. And somehow though I can't remember ended that sleep profile early if I had an alarm go off during that time frame so that I could be disturbed because I was no longer sleeping after the alarm went off. The reason for the 12am to 12pm time frame was to give leeway to time going to bed and also time for waking up without an alarm. The idea was so that I didn't forget to silence things before going to be and forget to undo that once I was awake.
So typically DND settings built into android allow at least close to this level of control. I'm not sure how Oxygen OS is configured, but on a Pixel I can configure DND to ring only for starred contacts, but allow text and other notifications through. Or, silence everything.
All of that said, you should be able to manage volume levels through Tasker, reject (send to voicemail) calls that are not in your contacts.
If you import your old profile, doesn't it work on the OnePlus?
ktmom said:
So typically DND settings built into android allow at least close to this level of control. I'm not sure how Oxygen OS is configured, but on a Pixel I can configure DND to ring only for starred contacts, but allow text and other notifications through. Or, silence everything.
All of that said, you should be able to manage volume levels through Tasker, reject (send to voicemail) calls that are not in your contacts.
If you import your old profile, doesn't it work on the OnePlus?
Click to expand...
Click to collapse
Stupid me I forgot to backup my old tasker stuff so I have to start from scratch again.
In the do not disturb setting UI of the settings UI there are the following:
Toggle DND on/off: this is toggled on and is set to stay on all the time.
Behavior heading
Notifications: tapping it opens a new UI giving you some default choices for notifications in general. I have this set to no sound at all. And override DND in specific areas outside of this part of settings regarding notifications from SMS/MMS messages, email, voicemail, calendar alarms. Might be one or two I am forgetting to mention.
Exception heading
Calls: tapping here brings up settings to allow calls from (anyone, contacts only, starred contacts only, none.) I have this set to contacts only.
Messages: same detail as calls. Set same as calls.
Other sounds: toggles to allow alarms, media, and touch sounds. I have these toggled to allow.
As for the other stuff that overrides DND I accessed that setting from within each of the apps settings. Not sure if that was a redirect from the app settings to a system settings area that I'm not aware of how to get to otherwise. So what I need is a profile that will mute everything while I sleep and return to how everything is currently set. On the LG G4 I accomplished this by turning all volumes to zero for sleep and then restored them all to 100% upon either the end time trigger of the sleep profile on upon an alarm I set to get up before the end of the timeframe of the profile.
What I was wondering if this was the way to go or if a more simple toggle one setting would accomplish it. I didn't see any DND setting in the system setting for no interruptions at all despite the overrides set. What I'm thinking is the same approach as before and set media, notification, ringer, and system volumes to zero and restore to 100% at end. The part I can't remember how I did it was ending the sleep profile when an alarm goes off that I set to a time prior to the end of the timeframe of the profile. Any idea how I would have done that?
I think which ever way gets you where you want to be is the way to go [emoji6]
On my Google phone, that's the ability to mute everything except alarms. There is also a toggle to disable DND when an alarm goes off.
As far as using tasker to turn volumes back up when an alarm goes off, my way of doing that is to intercept the notification for the alarm. Again, I'm using Google clock, and the way the notifications work may be different on your device.
Here is a taskernet share of a basic project using a notification intercept of the Google Clock alarm. Because there can be namespace collisions with imported projects, I append a variant of my username into variables, task and project names.
For everything to work the way it did I would need the sleep profile to end when an alarm goes off. The problem is I can't remember how that was done. I don't see an end condition that can be added to the sleep profile. The actual sleep profile is the only part I can remember enough to have replicated at this point. It being a from 12am to 12pm with a start task that turns all the volumes down to zero and an end task that turns them all back up. The alarm part I can't recall how it was done.
What was wrong with the notification intercept I shared?
That particular project was to put a large dismiss/snooze on the screen for a low vision individual, but it intercepts the alarm firing notification (for Google clock) and as I already said, intercepting the notification is the way I would do it.
It looks like it is a nice project, but it is requiring a plug-in. However the toggle was made before didn't require any additional things to be added. Isn't there a native event or state that a profile can trigger when an alarm goes off?
I assumed you tried using the native alarm clock or alarm done events in a profile and those didn't work. If you haven't, then try them. They don't work on my devices.
You could research java functions to get the next alarm and use the native java function action to then set a profile time context.
Remembered that tasker was designed to be a framework into which functionality could be added through plugins.
One of those is probably what was used on my LG G4. Now to figure out if this was a part of the one profile or a separate profile. I assume 2nd profile as I don't see any way of adding a 2nd end condition to the first. I remember when it was originally designed the conversation arriving at a solution to function as wanted was a long one. What bothered me is that the thread it took place in is missing from the forum it took place in. I even attempted to inquire there again about making it but after a week of no response I figured it was no longer a good place to post at.
StoneRyno said:
One of those is probably what was used on my LG G4. Now to figure out if this was a part of the one profile or a separate profile. I assume 2nd profile as I don't see any way of adding a 2nd end condition to the first. I remember when it was originally designed the conversation arriving at a solution to function as wanted was a long one. What bothered me is that the thread it took place in is missing from the forum it took place in. I even attempted to inquire there again about making it but after a week of no response I figured it was no longer a good place to post at.
Click to expand...
Click to collapse
What do you mean "2nd end condition"? A second context (condition) in the profile? Long press the first context.
The sleep profile uses time condition 12am to 12pm. I only need a 2nd condition that ends it but doesn't impact the start. I know for sure I can do that with a second profile now that I know what I needed to use to as event trigger. I can run a task that toggles off the sleep profile and toggles it back on some hours later to trigger again at 12am. I wasn't sure if the alarm event could be an alternative condition for end so that the sleep profile was 12am to alarm done or 12pm.