today my phone was working perfectly, but i took it out of my pocket during the day and my screen appeared as if it was cracked in some way. but it wasnt it was coming up like negative of everything. (can still sorta see everything) it also will sometimes flash back to normal, or if i push on the screen in the certain spot it will come back.
im figuring that the cable is unhooked or something. Anyone have any Suggestions ????
Related
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?
My tilt is acting very nasty lately. Over the past few weeks, I noticed that when I turned on the display, occasionally I would get something that looked like the static that you see on TV, but with colors. I would just turn off the screen, and turn it back on to clear it.
Now it's gotten worst! 98% of the time, it intermitantly gives me a blank solid white screen when I turn it on. Occasionally I can just turn to screen off, and on to reset it.
I'm running OEM WM6.1, and I've tried to reinstall the OS, but it didn't help. My phone has taken a beating, and the top corner has had a small crack in it over the past 2 months, but it didn't effect the touch screen, or picture. I also took off the cover to make sure the cables were all snug, and it didn't help.
Any suggestions?
Something got corrupted. If you search WIKI, it's call the 3 color screen stuck .. and you're better off posting at thread below. I hope someone can give you help (if you follow those steps and still no good)
As rule of thumb, do a lot of reading first
http://forum.xda-developers.com/showthread.php?t=423486
On a second thought, it might be the LCD itself broken ..
Oh, believe me.. I'm not one to turn to the forums without doing research myself! All the research I was coming up with seemed to point to a slightly different WSOD though. I think you are right about the screen being broken. I've reinstalled the software, and it acts up even when booting up!
Unfortunately, I'm not impressed with ANYTHING on the market to date! If I'm unable to fix this, I'll just go back to a RAZR until the next gen WM7 phones come out. (With a tilt screen of course!!)
Oh, and even though the screen goes white, it's not stuck, as it fully boots up; I can hear sounds, and even activate the touch screen.
Also, I forgot to mention.. the first problem I started experiencing was that my tilt would go back from landscape mode! It was like the video board was crapping out. I could even see a slight flicker in the display from the refresh rate.
hi i think you may need a new Need a new flex cable ribbon as i had the same problem once
Thanks Tayzaa, I think you could be on to something. I'll open it up and take another look!
Hi!
is this problem solved?
WSOD is bug of Hermes. I would know if kaiser have the same WSOD-bug with D-pad?
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
rocklobster666 said:
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
Click to expand...
Click to collapse
I have had the second part of your problem before where screen doesn't come on but the back light and everything else works. A couple of months back when I was at college I dropped my phone really hard at a party( I was wasted ) and the next morning the screen wouldn't come on. So what I did was I looked up the guide to how take the X1i apart and luckily one of my buddies had the same screwdrivers that I needed because he uses it on his the Blackberry Storm 2. So what I did was went to where the Flex ribbon cable was located unattached it, then reattached it, and put my phone back together and the screen came back on and still works to this day. If this helps press thanks.
http://forum.xda-developers.com/showthread.php?t=535664
i'm having a Problem too.
the to lines in the top of my screen are blue ^^
i think its a problem with the connection, but as it isn't really big and i don't have a newer phone i will dissasemble it later ;-)
please replace the * with t,or copy it without h**p:// (can't post outside links yet ^^)
h**p://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296861_222070397844215_100001237692896_682738_4498500_n.jpg
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
ZombieWarez said:
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
Click to expand...
Click to collapse
The sensor that the phone uses in order to register face proximity is just to the left of the forward facing camera. Ensure this is connected nice and solid (reseat the wire if necessary) and make sure there is no dust in it as this will likely cause it to behave as it has. Simply replacing the screen won't do this, but improper cleaning before replacing the screen could. You may have to tear the phone down again just to reseat the screen itself.
ZombieWarez said:
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
Click to expand...
Click to collapse
hmm i had the same issue BUT mine would do it when i cracked the digitizer, which is weird.. replacing my digitizer fixed the issue or it just cleared up itself, try resetting the phone.. Or like zombie said, Tear it down and clean the connectors and sensors
Cynagen said:
The sensor that the phone uses in order to register face proximity is just to the left of the forward facing camera. Ensure this is connected nice and solid (reseat the wire if necessary) and make sure there is no dust in it as this will likely cause it to behave as it has. Simply replacing the screen won't do this, but improper cleaning before replacing the screen could. You may have to tear the phone down again just to reseat the screen itself.
Click to expand...
Click to collapse
I have taken the phone completely apart and used a can of compressed air to clean it I double checked the sensor connector and made sure there was no dirt or dust in or around the connections. I put the phone back together and made a test call...still doing the same thing
But I did notice that when I made a second test in a dark room the phone did not go black and when I moved the phone close to a light the phone went black....needless to say I am so confused now more then ever. I did a third test and the same thing happened. So any other ideas as to what may be going on??? Seems like the sensor is working no? just in reverse??? Maybe the tint in the new digitizer is too dark? but this still makes no sense as to why the phone goes black when it gets exposed to light. Anyway any other help would be great right about now THANK YOU!