Weather adding city TF3D - XPERIA X1 ROM Development

Weather adding city TF3D - XPERIA X1 ROM Development

Hello,
Having severe issues in adding a city for TF3D's weather tab, tried using Falke's weatherdatabaseeditor 1.1, 1.1 modified and 1.2 (1.1 and 1.1 modified enables you to edit the database but causes TF3D to restart everytime you try to select weather tab, 1.2 says database is write protected). Also tried Joe's HTC Weather Database editor 1.3 and 2.2 rhodium, 1.3 allows for full editing and 2.2 allows me to just edit accu weather codes but both of them cause weather tab to make TF3D reload constantly!!
I have tried these in various soft resets and TF3D enabled and dissabled for the last 3 weeks on Valkyrie Firestorm, WCX series and ITJE's v12 ROM's but all do exactly the same. Slowly driving me away from most of the ROMs even though I really like TF3D and making me want to use plain ole' 6.5 because all I want is the weather where I live, it is driving me up the wall!
Any light anyone could shed would be greatly appreciated especially as I feel like a complete novice even though I have been able to setup/install everything else for my phone including making TomTom maps work with speed cameras which apparently is difficult!
Kindest Regards,
Jase E
P.S. sorry for the mini-rant, just winding up a touch!

Take a look at this thread.
Basically copy over the mentioned *.manila file to your pc, edit it as described with
sqlite, copy it back on your device, change one Registry key (the one that redirects the
weather URL) and you're done.
But one tip: the city examples are for old manila, to get it working you need to add
for example ",60,110" to the entry you want to add to the database, just have a look
at the output.
Good luck.

Thanks for the quick reply,
That looks fun, will try it when I finish my night shift,
Regards,
Jase

Related

Cing 8125 users: looking for input on next ROM

Howdy,
In about a week (assuming that G.W.B. can resist starting WWIII for that long), I'm going to build another ROM. This time I'd like to get some input on what to include.
A few things to keep in mind:
1) The goal is to include apps and hacks that appeal to the widest audience and are useful. If it's something that's not useful to a lot of people, then there's no reason to put it into a ROM. I can add more themes and ringers as well, but they should appeal to as broad a group as possible.
2) I won't include any commercial apps. Not even in an unregistered state. I might consider things that have been extracted from other ROMs, but I'm debating that with the voices in my head and will decide later.
3) Apps should be mature, not beta, if possible. I don't want to have to rebuild the ROM every time a new beta version of an app comes out.
4) If possible, attach registry hacks in the form of .reg files to your request. Or at least post the registry entry in you message.
5) It would we swell if someone could take the lead on tallying up the suggestions and help to prioritize. I'll shoot for building the ROM in about 10 days.
If we can keep the additions under 5 Megs total I think we'll be OK.
Here's what will be in there as of now (which is in the current custom ROMs)
-Oregami themes
-digital, cellular, and electronic ringers
-.NET Compact Framework 2
-A2DP/AVRCP
-Wireless Today screen plugin
-enable multi-select/delete contacts
-a hidden treasure map providing the precise pinpoint location of $2.33 in pennies that I previously buried when I was perhaps 7 or 8

First I want to say thinks for the bang up job you have done on putting together these roms for us.
The only things that I would like to see that I can think of would be the registery hack that makes GPRS/EDGE stay on all the time. And I would also like, if it is possible, anything that would make the phone us a WiFi connection, when present and turned on, instead of GPRS/EDGE.
I am not sure if it is possible to do that or not.

Usefull apps
Well I would like to have these applications in the next ROM
1) Smartkeys - http://forum.xda-developers.com/viewtopic.php?t=41060&highlight=smartkeys
2) Wakeapp - to easily setup OmapClock and other event-driven applications. http://www.kent7.com/holly/wakeapp/ , download EN version at http://kent7.sakura.ne.jp/holly/wakeapp/wa_arm021_e.zip
3) SMSDeliveryFix - to show SMS recipient name in a delivery report - http://forum.xda-developers.com/viewtopic.php?t=42696&highlight=sms+delivery+fix
4) WM5NewMenu - similiar to WM2003 "New" button - http://forum.xda-developers.com/viewtopic.php?t=40088&highlight=wm5newmenu
5) WM5torage - PDA acting as a memory card reader without ActiveSync - http://www.modaco.com/WM5torage-t238545.html
6) Some software for sending and receiving vCard via SMS.
Thank you for the great effort :wink:

The correct E or G icon
Caps, Num, lock indicators
ability to set OMPA and forget it.
smaller scroll bars

the three reptile themes at this site, I think everyone would like these, grey, blue, and red.
http://www.zombienexus.net/portal/GL_SubDirectory.asp?SEC=3&CatID=70
TCPMP-media player
Total Commander-file explorer/reg editor
Agile Messenger-great messaging app aol,msn,icq etc.
I think these are good apps that everyone could use.

the only thing i think would be beneficial would be adding all the reg edits that reg wiz adds to speed up our device, so we don't have to do it each time we clear storage. THAT would be awesome. i could care less about apps being included, i can install them just fine; but it's a pain in the ass every time i clear storage/flash new rom, that i have to redo all the reg tweaks.

I haven't found a way, but more emphesis on Storage Memory than Program memory would be good for me. I use alot of storage memory with Contacts, Email (even with moving my attachments to storage) and Calendar databases.
I used the much cleaner 2.17 RUU rom without the ringtones but did copy over a couple of them from the 2.17 with RT and OC. Also copied the OMAP clock and it's shortcuts.
A clean Rom without much of the extras would be good.
I also have customized my Cingular connection to use isp.cingular and [email protected] instead of the built in wap.cingular and [email protected] connection. I also turned of the proxy as it was interfeering with my AKU2 push from my Exch2K3-SP2 box.
Is there anyway to use the EXT ROM or add a slider bar like in WM2003SE?
J-Man5
p.s. thanks for the ROMs. I just got my 8125 about 2 weeks ago and have been having mucho grande fun with it.

ROM additions
How about:
- Total Commander
- ?? some sort of free registry editor (PHM RegEdit?)
- smartskey, I agree, but I think it's ini file needs to be in the same directory and it's small so this may not work
- RegWizard (the xda developer forum developed list of hacks), although actually i don't think this is necessary because it along with its framework requires over a meg, and you can just delete it once you install the desired reg hacks. . .
- Magic Button or some other similar task manager thing
I don't think more themes or ringers would be uniformly useful.
jason

Can you add something to truly shut down apps?
I've gotten in the habit of shutting down apps through the running programs tab under memory. Is there any way to make this easier such as putting a direct link in the Start menu to this page or on the Today list.
You know, summiter, you could just fix it so that the programs actually close when you hit the X.

Re: Can you add something to truly shut down apps?
sbuff said:
I've gotten in the habit of shutting down apps through the running programs tab under memory. Is there any way to make this easier such as putting a direct link in the Start menu to this page or on the Today list.
You know, summiter, you could just fix it so that the programs actually close when you hit the X.
Click to expand...
Click to collapse
Not unless he is going to rewrite the way Windows Mobile works. Thats a M$ thing. And also why apps such as vBar and Magic Button and InClose exist.
Summiter may be a ROM compiling wizard but lets not lay too many burdens at his feet to fix.
I'm just really happy push email is working.
J-Man5

Suggestions:
TCPMP with plugins http://tcpmp.corecodec.org/about
tGetFile.dll http://tillanosoft.com/ce/tgetfile.html
PocketNotepad http://tillanosoft.com/ce/pnotepad.html
PocketTweak http://tillanosoft.com/ce/ptweak.html

Adobe Reader 2.0 is huge and belongs in ROM. But is it popular enough? http://www.adobe.com/products/acrobat/readstep2_mobile.html#pocketPC

Continued Bluetooth Fixes
I have notice several still having Bluetooth issues with the lack of support; specifically, SSP over bluetooth. This opens up additional application possibilities not available today. I wouild like to run Bluetooth GPS with receivers such as the Holux 236 GPSlim, but the lack of SSP makes this almost impossible.
Just a thought

I'd like to see common registry hacks already applied and perhaps a txt file explaining the ones included with the new ROM. For example, the ones I listed below are from my own notes so when I re-flash I can re-apply them.
Regarding software, I'd almost prefer to see CAB files instead of pre-loaded software. Since CABs disappear once installed, we could make the choice of installing or deleting, and thus possibly save space but also gain the benefit of having them ready-to-install. You could even use different subdirectories for free vs the ones requiring a registration code to help keep the surprise / disappointment factor down (when we find out it costs money). This would also prevent a problem of competing solutions for some who prefer one plugin over another if they both serve a common function.
Along the same lines, I believe registry hacks can be applied via CAB files or maybe even .reg files (or maybe not - I'm still educating myself with all of this). You could stick with what you have for the current ROM but load it up with optional extras which could be deleted if we just didn't want them.
I think what you're doing is great and applaud your efforts!
I just started configuring my 8125 today, these are the hacks I applied so far (after stepping up to your 2.17 ROM):
Enable scrolling in IE with 4-way button
HKLM\SOFTWARE\Microsoft\Internet Explorer\Navigation\4-Way Nav
Change Value from 1 to 0.
____________________
Slide-out Keyboard Status Indicator
\HKCU\ControlPanel\Keybd
Create entry EnableIndicator and assign DWORD value of 1(decimal)
____________________
Increase your 8125 speed
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\
Change "CacheSize" value from "0" to "4096".
Assign a value of 1 to EnableCache
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt\
Assign a value of 4096 to ReplStoreCacheSize
____________________
Disable menu animation – removes menu animation which uses up system resources
HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu
Change "AniType" from "6" (default) to "0" (disabled).
____________________
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
____________________
Enable 802.11g
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms]
"dot11SupportedRateMaskG"=dword:00000008
"dot11SupportedRateMask"=dword:00000001

TCPMP
TCPMP definitely, I use this more than any other app on pocketpc devices.

I think you should also consider a paired down ROM. One without any Cingular addons that aren't required to make the device work on Cingular. Basically only the ones that set up MMS and the GPRS settings. I'd even leave out the proxy if thats possible.
But in this paired down ROM I'd still include a few extras like some extra themes and ringers.
And I'd put in the two programs I don't think anyone can live without, SmartSkey and TotalCommader.
Thats basically the setup I have now, but I'm wasting space in my extended ROM and other areas because there are things on my device that I can't remove and I'm not using.

azagahl said:
Adobe Reader 2.0 is huge and belongs in ROM. But is it popular enough? http://www.adobe.com/products/acrobat/readstep2_mobile.html#pocketPC
Click to expand...
Click to collapse
Is Adobe reader prefered over the ClearviewPDF Reader that is already in the ROM?

Re: Continued Bluetooth Fixes
jlsenter said:
I have notice several still having Bluetooth issues with the lack of support; specifically, SSP over bluetooth. This opens up additional application possibilities not available today. I wouild like to run Bluetooth GPS with receivers such as the Holux 236 GPSlim, but the lack of SSP makes this almost impossible.
Just a thought
Click to expand...
Click to collapse
I'm not familarwith SSP. Is it a profile? What does it enhance/enable?
Do you know if there are any WM5 devices which have it? (perhaps it can be ripped out and added to the Wiz)

knight4led said:
I think you should also consider a paired down ROM. One without any Cingular addons that aren't required to make the device work on Cingular. Basically only the ones that set up MMS and the GPRS settings. I'd even leave out the proxy if thats possible.
But in this paired down ROM I'd still include a few extras like some extra themes and ringers.
And I'd put in the two programs I don't think anyone can live without, SmartSkey and TotalCommader.
Thats basically the setup I have now, but I'm wasting space in my extended ROM and other areas because there are things on my device that I can't remove and I'm not using.
Click to expand...
Click to collapse
haha this is at least the second message that goes something like: "how about a ROM stripped of everything, but add this and that and oh yeah add this too". I say this in good fun so don't take offense. It just indicates that everyone has quite unique needs.
I will create a barebones ROM as well. But I don't want to have too many ROMs out there because I don't want to have to rebuild them all when something changes.
As far as using the Extended ROM for other purposes..as of now it can't be done. It's locked in some way that prevents effectively using as storage space. (if you try to manipulate it, it becomes corrupted). So the only use for it is to install stuff at first boot.

Well I might as well put in my two cents....but first....Summiter....marry me! I'll tell my wife to divorce me and she can take her nokia phone with her!
-Ok definitely Smartskey in the same folder as Omapclock so smartskey.ini file can tell omapclock to clock me at 216 everytime after soft reset.
-Please take out the stupid SIP keyboard...i'ts useless and can only be used by leprechauns with little fingers.
-A way to easily change splash screens.
-Hide SIM contacts
HKCU\ControlPanel\Phone
new DWORD value named "ShowSim" and set it to 0
1. Disable menu animations to increase performance:
"HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu"
Change "AniType" from "6" (default) to "0" (disabled).
- Add vibration instead of sound to keypresses in the phonepad for better tactile feedback:
for i = 0 to 9
Give an example for "i" Button:
[HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf "i"]
1. Rename Standart DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
For this there is also a cab file available.
***this is a cool registry tweak
- oh and this is a must have, all these pda phones lack in the phone department...people on the other side of a phone call can barely hear us until you put this registry tweak in.
\\\registry\HKLM\Software\HTC\AUDIOGAIN(x)\
changed RECEIVE_UPLINK_VOLUME and EARPHONE_UPLINK_VOLUME values to CC. after that change, microphone sensitivity got better and didn't receive any more complaints.
Though i wish someone knew a way to improve the sound mic quality during speakerphone.
And there are so many ringtones in your rom summiter...they all sound alike lol. put the You've got mail.wav file for incoming mail, i have it if you want. how bout some funny ringtones or music ringtones instead?
k that's all

[APP][May 5 2009][WWE] TouchFlo Detacher 1.0.1.1 FINAL - Another TF3D/Today switcher!

I have ceased development of this project because I don't use TouchFlo 3D anymore. All source code is available. If anybody wants to take over the CodePlex project, just PM me and it's yours for the taking!
Overview
TouchFlo Detacher is yet another way to simultaneously have TouchFlo 3D / 2D and the regular Today screen. Previous excellent solutions include SecondToday and ManilaControl.
CodePlex
TFD development is hosted at Microsoft CodePlex! http://www.codeplex.com/TFDetacher
Tip Jar
Like this app? Want more like it or quicker updates? Tip a buck (or Euro or Pound or whatever) or two to help the author out! Click here to make a safe donation via PayPal.
Description
So what makes mine different? Well, my app is actually very similar to MastSogo's ManilaControl. The main difference is that I plan to actively develop it now for a while, whereas ManilaControl has been a bit frozen in development for a few months. Mine is also open source, licensed under the Ms-RL. Mine is on CodePlex, so download speeds should be much better than the average rapidshare link. Finally, mine is in English and not Spanish. Other than that, it's just another solution for the same problem!
I must give a hearty thank you and bow to MastSogo for inspiring me to work on this.
I believe I am using a similar technical solution to his, but mine is written from the ground up, so it shares no source code with his!
See it in action on the YouTubes
http://www.youtube.com/watch?v=uk0xWm8PMGQ
Current features
- Free up your Today screen by hosting Manila outside of the Today screen! TouchFlo Detacher can launch/show/hide/close Manila independent of any other Today screen settings. Now you can have your TouchFlo cake and eat it too! The most obvious use is to assign a soft key to toggle between seeing TouchFlo and seeing the regular Today screen.
- Supports TouchFlo 3D and TouchFlo 2D.
- NO ANNOYING SPLASH SCREEN when application launches.
- Configuration application allows advanced customizations so that this utility can be used with non-standard or untested Manila versions.
- Configuration application can clean out the ManilaActivateToday.exe from the notification queue. (That app can interefere with TouchFlo Detacher's operation.)
- Shortcuts to start/show Manila, hide Manila, toggle (show/hide) Manila, and close Manila. These can be assigned to hardware buttons (if your device has them), to virtual hardware buttons through the use of 3rd party applications such as AE Button Plus, or to gestures using 3rd party applications such as FTouchSL.
- Configuration application can customize the softkeys in both Today and TouchFlo's Home tab. You can use it to not only assign TouchFlo Detacher operations (show/hide/close), but any other application on your device.
- Launch an application after TouchFlo launches... Such as SSMaHo. It's easy. Create an attach link in SSMaHo. Put the attach link in the config: \Windows\Start Menu\Programs\SSMaHo Attach.lnk
Known Issues
- On the Touch HD, the home hardware button does not return to the Manila "home" tab. This does not happen on the Pro or Diamond. Workaround: none. Scheduled fix: unknown.
- Sometimes the clock on the TouchFlo home page will stop and go out of sync with the real time. Workaround: hide and then show manila. I may need to create a scheduled task that can do that as an automatic workaround once per day for those experiencing the problem. Scheduled fix: unknown.
History
1.0.1.1 STABLE FINAL - Fixed bugs in 1.0.1.0; Added ability to launch an app after TouhcFlo launches.
1.0.1.0 BETA - The first version of TFD that no longer requires a pseudo-service. All functionality should be identical to 1.0.0.5, otherwise.
1.0.0.5 STABLE - The "hide then show" workaround wasn't working in some instances, so I put extra detection code in to determine the current state of Manila before issuing the hide/show commands. If this doesn't work, I can add customizable delays. Also added AppToDate support!
1.0.0.4 STABLE - First release I am considering stable! It is identical to the very tested 1.0.0.3 except for one new feature. When you start the TFDService you can now optionally have it hide and then show Manila immediately. It does this VERY quickly, so you may not even notice it happening on screen. This is done so as a workaround some users are having where they cannot access the phone until Manila is hidden at least one time. Very odd behavior. It is working perfectly in my tests, but please let me know if this workaround doesn't work for you.
1.0.0.3 Beta - TF2D support I think is finally complete! Please test! New layout for TFDConfig. Standard and advanced options are now in separate tabs. More advanced options for alternate Manila configurations. Fixed bug in config where a crash could happen when you tried removing ActivateManilaToday. Toggle TouchFlo command is now available (note: this toggles show/hide, NOT show/close).
1.0.0.2 Beta - New language-neutral detection of Manila process and window handles (no longer need to know titles!). Fixed (hopefully) bug where the softkeys sometimes didn't hide correctly. Window class "search" is no longer case sensitive. Optional delay when starting Manila at system start-up (attempting to work around issue where Manila won't launch on startup).
1.0.0.1 Beta - Confg app can now start the service. The service has better error reporting. Config app can remove TouchFlo today item. No need to soft reset! TouchFlo 2D support (maybe - I'm trying!). Some crappy icons ;-) ... Service detects if TouchFlo Today item is enabled. Link to start and stop the service. Fixed installer bugs. Bug fixes!
1.0.0.0 Beta (aka BETA1) - Initial release
Download
CAB Installer: http://www.codeplex.com/TFDetacher/Release/ProjectReleases.aspx
Source Code: http://www.codeplex.com/TFDetacher/SourceControl/ListDownloadableCommits.aspx
Installation
As explained on CodePlex...
1. Install the CAB
2. Run TFDConfig (important!!!)
3. Enable all the standard Today Items you want to use
4. Do not re-enable TouchFlo in the Today items (if you do, it will undo all your other Today plugins and your device might freeze up, requiring a soft reset)
Requirements
Windows Mobile 6.1
.Net Compact Framework 2.0
A device that runs TouchFlo3D (Manila) or TouchFlo2D (Manila2D).

FAQ
FAQ
Q: I uninstalled TouchFlo Detacher but TouchFlo did not come back!
A: Changes made with TFDConfig will not automatically be undone when you uninstall TouchFlo Detacher. To get TouchFlo back, go into your phone's settings. Go into Today. Go to the "items" tab. Check in "TouchFlo 3D" (or 2D or whatever). Exit. TouchFlo will be back.
Q: I uninstalled TouchFlo Detacher but my softkeys did not go back to the way they were before!
A: Changes made with TFDConfig will not automatically be undone when you uninstall TouchFlo Detacher. Do not worry! Fixing this is very simple. Before uninstalling TFD, it's recommended you run TFDConfig one more time and reassign the softkeys to whatever you want them to be. For TouchFlo's softkeys, all you have to do is set them both to empty (as in, nothing) to get the default softkeys (phone/programs). For Today's softkeys, you can assign them to whatever you want -- calendar, phone, contacts, your choice!
If you have already uninstalled TFD, you will need to use a registry editor to reset the values. Here are the relevant keys:
Today left softkey:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112
[Default] = Text on softkey
Open = Path to program to run
Today right softkey:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113
[Default] = Text on softkey
Open = Path to program to run
TouchFlo 3D left softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeLSKText = Text on softkey
HomeLSKPath = Path to program to run (or blank for default)
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
TouchFlo 2D left softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home
SK1 = Text on softkey
SK1Cmd = Path to program to run (or blank for default)
TouchFlo 2D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home
SK2 = Text on softkey
SK2Cmd = Path to program to run (or blank for default)

Hi,
Is this a Manila3D only switcher or will it also work with Manila2D? I have been using Mastsogo's until now, but the lack of support is a bit worrying.

motisu said:
Hi,
Is this a Manila3D only switcher or will it also work with Manila2D? I have been using Mastsogo's until now, but the lack of support is a bit worrying.
Click to expand...
Click to collapse
It may work with TF2D, I just have no way to test it since my device is TF3D. In the config, you can specify the location of the Manila EXE and the window class/titles. I'm assuming since MastSogo's did both, it's just a matter of tweaking those settings. As soon as somebody gets me that info, I can add it into the config app.

Installed on a Wizard (WM6.1 5.2.20273) running Manilla2D, set Today screen to use TodayAgenda 1.5 only. After soft reset, I get a Win32Exception with the following debugging information (see attached).
I'm checking the launch parameters in the config now (I started with the defaults).

Sheesh, I should have checked the parameters before going to the work of assembling that debugging jpeg. For Manila2D, the two references to Manila.exe need to be changed to Manila2D.exe. I still don't have it working, but at least it only throws one error message now.
I don't have any more testing time today. Good luck with your app.

thx1200 said:
It may work with TF2D, I just have no way to test it since my device is TF3D. In the config, you can specify the location of the Manila EXE and the window class/titles. I'm assuming since MastSogo's did both, it's just a matter of tweaking those settings. As soon as somebody gets me that info, I can add it into the config app.
Click to expand...
Click to collapse
As Uracil said, the name of the executable for TF2D is Manila2D. That's why Manila control needs a config program. It asked which one you are using and sets the parameter accordingly.

Fantastic. Loaded this onto my AT&T Stock, fully bloated Fuze. Works like a champ! Great app, thanks!

I will try this for sure!
TWO THINGS!
1) anybody knows a safe way to uninstall Manila Control?
2) I am a bit affraid of this "resident" thing... this program (TFD let's call it) uses one of the very scarce 32 processes? if YES sorry it's not for me (I am already dangerously close to the limit - up to the point that some sync processes don't have where to run)

nice app! well done

Ran through the steps to set it up, on soft reset the device hangs at the startup HTC animation, Hard reset time , the manila im using has the following mods:
CFC Compression
Background 4 all tabs (mun rus)
Stocks tab
HD contacts
Will investigate further..
EDIT: Havent been able to replicate this issue after a hard reset, probably something else i installed.
Minor issue ive spotted though, set left softkey in TF3D to "Today" which hides TF3D....in the blank today screen i dont see the setting for the left softkey (Which is set to "TouchFlo 3D" and should show TF3D) i still see the softkey setting from when TF3D is visible. So the effect is i cant get back to TF3D after hiding it unless i literally run it from the start menu.

NLS said:
I will try this for sure!
TWO THINGS!
1) anybody knows a safe way to uninstall Manila Control?
2) I am a bit affraid of this "resident" thing... this program (TFD let's call it) uses one of the very scarce 32 processes? if YES sorry it's not for me (I am already dangerously close to the limit - up to the point that some sync processes don't have where to run)
Click to expand...
Click to collapse
WM 6.x and newer raised the process limit to 32768, so you should be fine.
EDIT: I was wrong! Don't believe me! Keep reading below. (The short of it: WM6 is based on CE 5.0, NOT CE 6.0, which is the version of CE that doesn't have the 32 process limit.)

Uracil said:
Sheesh, I should have checked the parameters before going to the work of assembling that debugging jpeg. For Manila2D, the two references to Manila.exe need to be changed to Manila2D.exe. I still don't have it working, but at least it only throws one error message now.
I don't have any more testing time today. Good luck with your app.
Click to expand...
Click to collapse
The exception you showed is the service not finding the EXE. There are two places you need to change it. The "EXE Only" config is just the name of the EXE (for finding it in the running process list). The "full path" is where the file is located in the file system (including the EXE name!). Did you change both?
Thanks for the info. I'm going to make that "file not found" error more friendly for beta2. Also, now that I know what I'm looking for, I can add a built-in way to switch from Manila3D to Manila2D.

mrvanx said:
Ran through the steps to set it up, on soft reset the device hangs at the startup HTC animation, Hard reset time , the manila im using has the following mods:
CFC Compression
Background 4 all tabs (mun rus)
Stocks tab
HD contacts
Will investigate further..
Click to expand...
Click to collapse
Does it get to the Today screen at all? The service is in the Startup folder. All it does is try to Launch manila.exe at startup (you can actually even disable that if you want to in the config), so it would be really weird if that froze the device. Not saying it's not possible, just really really weird!

thx1200 said:
Does it get to the Today screen at all? The service is in the Startup folder. All it does is try to Launch manila.exe at startup (you can actually even disable that if you want to in the config), so it would be really weird if that froze the device. Not saying it's not possible, just really really weird!
Click to expand...
Click to collapse
See my edit above

thx1200 said:
WM 6.x and newer raised the process limit to 32768, so you should be fine.
Click to expand...
Click to collapse
No man you are wrong (100%).
In *my* WM6.1 at least, the limit is 32. Well in fact all WM6.1.
Only new WinCE (not the builds used in WM6.X) have lifted this limit.
WM7 is supposed to not have this limit (because uses different WinCE) and a very small possibility (like 5%) that WM6.5 will have this limit lifted.
With the help of Daniel Herrero (the guy that makes CommManagerPro) we even built a simple app that we run as much as we could, to test this.
Sure enough my device after 4-5 runs started killing other apps. After 1-2 more runs, I got a pop-up that said that I cannot run more apps because I reached the process limit. My device is a loaded Touch Pro.
His much lighter X1, sure enough came to the same result, but only after more runs, about 10 or something (since he had more process "slots" free).
So you probably have to (and please do) rethink your strategy (for example use a REAL service or handle things based on triggers) as processes ARE a scarce commodity in WM.
At least add a mode or something that doesn't use a process all the time (even with some extra delay). I will certainly NOT eat more of my processes.

I installed this on my Touch HD... ran config but chaned nothing, disabled TF3d and soft reset... now don't know what to do... seem to be missing a step... for example how to toggle between Today and TF3d... running hide and close tf3d in the utilities folderdoes nothing

NLS said:
No man you are wrong (100%).
In *my* WM6.1 at least, the limit is 32. Well in fact all WM6.1.
Only new WinCE (not the builds used in WM6.X) have lifted this limit.
WM7 is supposed to not have this limit (because uses different WinCE) and a very small possibility (like 5%) that WM6.5 will have this limit lifted.
With the help of Daniel Herrero (the guy that makes CommManagerPro) we even built a simple app that we run as much as we could, to test this.
Sure enough my device after 4-5 runs started killing other apps. After 1-2 more runs, I got a pop-up that said that I cannot run more apps because I reached the process limit. My device is a loaded Touch Pro.
His much lighter X1, sure enough came to the same result, but only after more runs, about 10 or something (since he had more process "slots" free).
So you probably have to (and please do) rethink your strategy (for example use a REAL service or handle things based on triggers) as processes ARE a scarce commodity in WM.
At least add a mode or something that doesn't use a process all the time (even with some extra delay). I will certainly NOT eat more of my processes.
Click to expand...
Click to collapse
You are right. I was going on what I read on another website from a while back. I just did some research and, sure enough, WM6 is based on CE 5, which has the 32 process, 32MB limit still in place.
The strategy I am using will not change as there is no way (that I know of) to write a service DLL in the Compact Framework, but if somebody knows of a way, I will certainly look into it.
EDIT: I did a check and I'm only running 24 processes with my media app, Total Commander, TFD, 3 other "service" apps (dont forget, PocketShield, VistaHide Battery Bar). That leaves me with 6 more apps until WM6 gets nervous (it seems to close after going above 30). How are you so close? I'm not judging your mobile computing habits, I'm just curious! Also, I'm thinking of rolling the "service" code into stand alone EXEs for cases like yours, but it will be very slow switching back and forth. I tested that at first before deciding on the memory resident app and it took about 5 seconds to switch each time. But maybe you'll have better luck!

abeery said:
I installed this on my Touch HD... ran config but chaned nothing, disabled TF3d and soft reset... now don't know what to do... seem to be missing a step... for example how to toggle between Today and TF3d... running hide and close tf3d in the utilities folderdoes nothing
Click to expand...
Click to collapse
It's possble the HD may have a slightly different Manila configuration than the Diamond/Pro. If you find the manila.exe and can scan the window classes and titles (such as with FDCsoft's Task manager) that will give you the info you need to configure it for the HD. If you figure it out, post it here so I can add it to the config app.

mrvanx said:
EDIT: Havent been able to replicate this issue after a hard reset, probably something else i installed.
Click to expand...
Click to collapse
GOOD! Whew!
mrvanx said:
Minor issue ive spotted though, set left softkey in TF3D to "Today" which hides TF3D....in the blank today screen i dont see the setting for the left softkey (Which is set to "TouchFlo 3D" and should show TF3D) i still see the softkey setting from when TF3D is visible. So the effect is i cant get back to TF3D after hiding it unless i literally run it from the start menu.
Click to expand...
Click to collapse
Let me see if I am understanding you. The left soft key on the "real" Today screen says "TouchFlo" but it isn't launching TouchFlo? If you go into the configuration and set the Today left soft key using my quick drop down (Show TouchFlo 3D) this doesn't fix the issue? If so, can you post what the app path is that it is showing?

My Personal Favorite Apps/Tweaks

I thought it was about time I shared my secrets. I've thoroughly tested every app. What doesn't work well, I don't post or use. Most if not all are .cab files so installing them is a snap. Some applications do require a second program for them to run, thus it would be more convienient if you were to install them first. The two files are Adobe Flash 7, and the .NET 3.5 Framwork...
Flash 7: http://download.macromedia.com/pub/flash/devices/pocket_pc/installers/fp7_ppc_en.cab
.NET 3.5: http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Unfortunately the .cab file is somewhat hard to find for the .net framework. The link I've inlcuded is from Microsoft and is installed from your PC. If all else fails a quick internet search for ".net compact framework cab" should get a result. Make sure you install both of these programs TO THE DEVICE.
Note...the list isn't in any order, I like them all!
FlashLIGHT
This is one of my favorite programs. It's called FlashLIGHT. It's a flash application (amusing isn't it?). It's an .exe file you copy into your programs folder under My Device>Windows>Start Menu>Programs. Then it will appear in your programs list. It's a really nice app with some really neat features...including...THE LIGHTSABER. Yes, for once, a lightsaber app for a phone without a motion sensor.
http://forum.xda-developers.com/showthread.php?t=458269
S2U2 (Slide to Unlock 2) and S2V (Slide to View)
Here's one that was just updated today! I really like this one just because it's really easy to use. It has full screen caller ID, SMS, MMS, and Email notifications. I would recommend you install it to the phone.
The other app that also works with S2U2 is S2V, it's a really nice photo viewer that you can also use to set the background to the today screen, contacts, and the background for portrait and landscape mode in S2U2.
More information and the links to download are at the developer's site...
http://s2u2.ac-s2.com/
Batti 2.4
This plugin is really handy. It's a battery gauge that sits at the top of the taskbar and shows graphically how much battery is left. There are like one or two other apps similar to this but this one is very customizeable. Install this one to the device.
Batti 2.4: http://batti.googlecode.com/files/Batti-2.4.zip
HTC Home Customizer
This one is kind of nice just for a change of pace. If you're like me, you got bored looking at the same plugin. Install to the device.
http://forum.xda-developers.com/showthread.php?t=375921
StopWatch 2.2
Very nice chronograph app. Haptic feedback (vibrates when you tap the buttons), split, and alarms. You can install this to the storage card.
http://kaldma.se/programs/stopwatch/
Pencil Box
This one is really nice. This is the free version, and as you will find out, you can't save your masterpieces. I have the full version and if you're into sketching like me, it's well worth the $13. You can install this to the storage card.
Free Version: http://www.freewarepocketpc.net/ppc-download-pencil-box.html
Full Version: http://www.handango.com/catalog/ProductDetails.jsp?storeId=2218&productId=111172
Kaiser Tweak
This is a MUST for any Kaiser owner. Enable HSDPA, turn off that extremely annoying startup sound, make the keyboard faster, and much more! Make sure you do a soft reset after changing any settigns. Install this to the device.
http://forum.xda-developers.com/attachment.php?attachmentid=92385&d=1213369847
Well I think that about does it.
Signing off,
HTCnerd

R [WWE|GER|FRA|ITA|NLD] |July 4| Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2021

Welcome to the "EnergyROM" thread !
This development thread is for my "Energy" custom firmware series for the HTC Touch Pro2 (Rhodium) device.
This ROM only works on GSM devices, flashing to a CDMA device will make it non-bootable (flash a stock, or CDMA specific ROM, to recover from that).
I do make a CDMA version (Sprint, Verizon, Altel, etc) and that's found here!
The current build numbers and date can be seen in the title of this thread. I usually update the ROMs about twice a week, as new builds come down the pipe or as new software/updates are available.
I build my ROMs with four main goals.
Eye candy ( I want my ROM to look great and for it to all flow together nicely)
Speed !!!
Smoothness, consistency and good aesthetics
Stability through private beta testing before public release
I pre-configure a lot of things in my ROM, because when I flash it on my phone, I want it ready to go. So, expect the backlight to be set at the maximum brightness, the ringtone, sms/email and other notifications to already be set. Doing it this way, makes for a nice ROM that's ready out of the box.
I recommend learning to backup your settings with either Sashimi or UC (User Customization). Backing up with SPB Backup or similar products, is NOT recommended, as they tend to backup the previous release's registry/file bugs as well!
Looking at the download folder you will find two core versions of my ROM.
A 21916 Build which is the most reliable and bug free release. It has the Start menu button at the top left corner. This build uses the same stock system that came with your device. This is usually the fastest and most stable build, but it's also the least fancy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A 29022 Build that's the latest in Microsoft's development with the Start menu button at the bottom left corner and big softkeys, making it all very "finger friendly". These builds reflect the latest cutting edge technology from Microsoft. Most people choose this build... Why else would you install a custom ROM ?
---------------------------------------------------------------------------------------------------------
You can stay up to date on the status of my ROM development by "following" me on Twitter.
It's definitely the fastest way to get in touch with me and please don't be afraid to tweet me if you see major issues with the ROMs.
I generally do not answer "support" questions on Twitter, as it's really not the proper medium for that. Service packs and quick fixes will always be released as links in my tweets and that's definitely the fastest way to get a fix for a ROM.
To follow me on twitter, click here!

This post features all the Cookie Hometab based ROMs I make.
The original ROM is the "energy" version and that's a good starting point. All the rest, are themes applied to that ROM.
They all come in two versions, Cookie 1.8.5 and Cookie 2.0 (the ROM filename will be labeled "Cookie" and "Cookie.2.0, plus the name of the theme)
You can see more screenshots of these ROMs a couple of posts down.
The two Cookie versions look pretty similar, but Cookie 2.0 has multiple sliding homescreens/freely moveable widgets (similar to Android) and
quite a few more features and speed.
My own 'Energy' style
This is the best ROM version and the way Sense should have been designed by HTC
Offers the biggest customization ability out of all versions. You can add/remove bars or items on the homescreen, arrange items any way you like, plus lots of extra features
Three built in lockscreens. "HD Mini" style, Manila style or Windows style
3 pages of quicklinks with a configurable amount of shortcuts displayed
3 Homescreen layouts to choose from, as seen in the above screenshots, all completely customizable !
Link to the original thread for this mod is here > Click <
Dinik's "Anastasia"
This ROM series is skinned with Dinik's great "Anastasia" theme applied on everything.
Everything has been skinned, including Sense, the start menu items, the soft keyboard, parts of the dialer... etc
_LeCiel_'s ".sencity"
This ROM is themed with the .sencity theme released by _LeCiel_ who is a very talented artist ! Please support his work if possible.
.sencity is not %100 complete yet, but _LeCiel_ is working hard on finishing his work to completely skin the entire ROM.
Link to the original thread for this mod is here > Click <
DJC & Bobsbbq's "Touch Of Glass"
This ROM series is skinned with DJC's "Touch of Glass" theme throughout Sense and the Start Menu
More will be skinned as DJC continues his work on the theme in the future...
Link to the original thread for this mod is here > Click <
ElCondor's "GTX"
This ROM has the white GTX theme applied
Android styled taskbar, matching dialer, matching start menu background and Action screen background
GTX is a total reskin of the operating system, so expect a very different (white) experience
Link to the original thread for this mod is here > Click <

'Standard' ROMs that have no addons installed on the homescreen. Stock Sense 2.5 !
'Energy'
This series retains the stock functionality of the Sense UI. The files have been compressed by "CFC" compression. making the UI lighter and faster
This ROM still retains my theme and style, plus all the regular apps you find in my ROMs.
There are no homescreen addon-ons in this ROM. The best speed and the most stock functionality.
'Reference'
This ROM is mostly for people that want a close to stock ROM with the stock visual style. It's also perfect for doing your own customizations.
A lot of the cooked in apps are removed in this ROM, the Start menu back to the stock 3 row style
Sense and everything else is back to the default HTC green.
ROMs mostly created for enthusiasts...
MaxSense UI (android style homescreen)
This is a complete rewrite of the Sense homescreen, by maxycy.
It features a 3 screen, Android style, homescreen with widgets! The widgets can be placed ANYWHERE on the three screens.
75 Quicklink accessible on all tabs
You should really visit the original thread for this mod shown on the next line to see all the features!
Link to the original thread for this mod is here > Click <.
Titanium (ROMs for raw speed!)
This is a minimal ROM version without Sense in it. It's used primarily for people that like to customize the default 6.5 homescreen (Titanium)
You can use it to install alternate homescreen interfaces like SPB Mobile Shell, etc
Very low memory footprint and good battery life, but very simple and lacks a lot of features that you would otherwise have available in Sense...
ALL my ROMs have Titanium built in already along with Sense, but THIS ROM is Titanium only.
Click the following link for addons, XDA_UC help and various cabs specific to this ROM series

List of installed applications
Games
Bubble Breaker
Solitaire
Teeter
GPS
QuickGPS
Google Maps
HTC GPSTool
Internet
Opera 9.7
Jbed Java
RSS Hub
Remote Desktop
A couple of widgets for ROM Updates
MSN Messenger and Windows Live
Facebook
Palringo
Windows Live
Messenger
Bing
Send and Receive All
Data Controller
Multimedia
Audio Booster
FM Radio
MP3 Trimmer
Voice Recorder
YouTube
TCPMP
InCall Recording
Office Mobile
Full suite of Office Mobile 2010
Tools
BsB Tweaks
Flashlight
Lock Device
Microsoft MyPhone
Registry Editor
PIM Backup
FDC TaskManager
Wifi Router
XDA UC
My own Settings Exporter tool
Shake and Save (screenshot app)
Wifi Monster
Wifi Router (internet sharing app)
tBattery
On the Start Menu
Backlight control app
Total Commander
Rotate Screen (by clicking icon or by pushing down Send key)
Windows Marketplace
ROM features at a glance:
Very fast startup time. You find any startup wizards in this ROM. You'll be up and running in a couple minutes after flashing the ROM.
XDA_UC is built in. It will import your custom XML and REG files from your storage card after first boot.
My own Settings Exporter application is found in the Tools folder. Use it to export all your settings after you customize the device. When a new ROM comes down the line, use it to import everything and save time.
Everything is setup to use the phone right after flashing. Sounds, notifications, etc
The HTC Messaging client is removed, leaving the windows built SMS client for much faster texting...

Release notes
July 4th, 2011
Wifi Router app updated for more compatibility (especially VGA devices)
USSD Service app fixed and updated
Removed rogue Imagio bootup welcomescreen and animation
Fixed InCall volume issues for 21916 VGA devices ROMs
Fixed Bubblebreaker for 21916 ROMs
VoIP components thrown back in
-----------------------------------------
July 2nd, 2011
Updated to 29022
Bluetooth HID profiles cooked back in
Fixed Opera favorites problem in Titanium ROMs
SIM Manager not opening on some devices, fixed
Camera version 6.45 from Oboe integrated in all HD2 specific ROMs
Added Ninja Duck's "No WIFI Sleep" cab to the addons directory to stop wifi from sleeping during HTC Wifi Sharing operations (http://www.energyroms.com/Addons/Regular%20Addons/index.php)
Sencity skinned dialer made by "eac" (only on some devices, HD2 and VGA excluded)
June 1st, 2011
Fixed Music tab bug where songs don't play all the way or get stuck on "searching"
Fixed blue disabled button situation in certain instances, but keeping the WM contacts readable
WorldCard Mobile removed from ALL ROMs (useless, broken, app... if you want it there's plenty
of cabs for it around)
Some ICONS are now squared for better compability with SPB and other apps
Audiobooster skin for Touch of Glass ROMs (WVGA only)
Added nice 28 day Agenda MOD to Calendar tab in Sense (thanks to slabbi! not sure if this got cooked in ?!? feedback please...)
Week view in Sense Calendar tab is now more legible with a blue highlight instead of grey
Palringo updated to 2.6.2
Stock CHT Layout restoration file fixed for all ROMs
GTX Taskbar mod to 21916 ROMs for better visibility of task manager icon
GTX Skin for TCPMP
GTX Skin for the MP3Trimmer
GTX Mod for the CommManager
All of the above GTX mods are thanks to member eac ! Romanian power! lol
GTX "music widget not displaying on homescreen bug" fixed
Slight adjustment to HD2 GTX dialpad
-----------------------------------------
2010 (trimmed) -----------------------------------------------------------
2009 (trimmed) -----------------------------------------------------------
2008 (trimmed) -----------------------------------------------------------

Now we have a FAQ system. Feel free to PM me with changes/additions to this!
EXTRA: If you installed a ROM using CHT 2.0 and Sense keeps restarting, the solution is here.
NO NEED TO FURTHER COMPLAIN OR REPORT THIS ISSUE!
1 - THE BASICS:
GSM vs. CDMA: This thread and ROMs are for GSM phones ONLY! If your phone is CDMA (Sprint, Verizon, Altel, etc.), CDMA versions of this ROM can be found here. Flashing to a CDMA device will make it non-bootable (flash a stock, or CDMA specific ROM, to recover from that).
How to check if your phone is GMS or CDMA: Look the model number under the battery. RHOD100, RHOD200, RHOD210, RHOD300 are GSM. RHOD400 and RHOD500 are CDMA.
Different flavors of the ROM: This ROM is offered in several flavors. Please read the #2 post to better understand each and pick the one you prefer.
The numbering system used on the ROM: The ROMs have different builds, identified by a number such as 216xx or 219xx. To learn more about what the numbers mean, some differences between the builds, and performance benchmarks, check this thread.
ROM Language: Energy ROMs are available in English and a few other languages. The Chef is progressively increasing the language options, based on demand. However, keep in mind that it is unlikely that there will be a version for every single language, so complaining about it won't help.
New versions of the ROM: New versions are posted often. Usually twice a week. There is a changelog in the 3rd or 4th post. However, the Changelog isn’t always up to date. Often the most current changelog is made available first at the Leo (HD2) thread. In order to keep the thread clean, please DO NOT keep asking what is new, or complaining that there is no Changelog. Either wait for one, or flash the ROM and see for yourself.
How to flash the ROM: There is an excellent guide here. Also, make sure to read topic # 4 below ("SUGGESTED SEQUENCE TO INSTALL A NEW ROM"), with a suggested sequence to install things progressively, and help you to pinpoint any issues you may have with a new ROM.
Radio: Radios are separate from the ROM and control the phone's communication hardware. This ROM DOES NOT change your radio, the same way that flashing a new radio does not change your ROM. Radios may work better or worse depending on your service provider and your location. Radios (and discussions about them) are found here.
Battery: This ROM is set for performance, and it is likely it will use more battery. However, after flashing a new ROM, it takes a few charge/discharge cycles for the battery gauge to stabilize, so please refrain from posting comments/complaints about battery life. Some good hints about the battery can be found here.
Carrier Provisioning: There are many different carriers, and some require different provisioning. If you are experiencing issues such as sending/receiving SMS/MMS, or your physical keyboard is not mapped corrected, you MAY need to provision for your carrier. For AT&T and T-Mobile, go to Start > Tools > Carrier Provisioning and select your carrier. For other carriers, go to Start > Connections > Connections > Advanced > Select Networks and either select from the drop down menus to edit or click on New to add a new one (you may need to contact your carrier to get the configuration information).
For AT&T, carrier provisioning can be performed automatically through XDA_UC by copying energy_att.cab from \Windows to \Storage Card\XDA_UC.
XDA_UC: EnergyROMs use XDA_UC, which is a tool to automate some of the installation and configuration steps. There is a good thread with XDA_UC hints and tips here.
2 - TWEAKS:
Add-ons: NRGZ made a few add-ons available on his website. To check them, click here.
Settings: The Sense interface has several settings, including the ability to remove tabs or change their sequence. These settings can be found on the last tab, called… Settings! Additional settings can be changed with BsB Tweaks, and Advanced Config, both can be found at Start > Tools.
Screen rotation with keyboard closed : Some applications already have the screen rotation activated by default. In order to activate others, you either go to Start > Tools > BsB Tweaks > Menu > Rotation, or install a program such as ChangeScreen. If you are familiar with editing the Registry, additional applications can be also be added at HKCU\Software\HTC\HTCSensor\GSensor.
Changing the Time Zone: Go to Start > Settings > Clock & Alarms.
Changing the soft keys on the Home screen: To change the left soft key, use Start > Tools > BsB Tweaks > Menu > Left Manila Softkey. There is no user accessible way to change the right soft key.
Closing or changing the soft keyboard: The builds running Windows Mobile 6.5.3 have a special way of dealing with the soft keyboard. If you tap on the the right side of the keyboard icon, you get the menu which presents you with a choice of soft keyboards. Tap anywhere on the icon to open or close the soft keyboard.
Disabling internet push: Newest versions of EnergyRom have internet push enabled. If you prefer to disable it, the instructions are here.
Notifications: If you are not receiving a notification (such as when you receive a SMS or e-mail), or want to change your notification settings and sounds, go to Start > Settings > Sounds & Notifications > Notifications. Click on the drop down menu to select the event you want to configure. If you want to manage the led notifications, install the cab posted here.
The phone no longer asking about USB connection type when connecting it via USB: Go to Start > Settings > Connections > USB to PC and check the last box (the one that says “Ask me first…”)
FM radio: Newest versions of EnergyRom were modified to allow the use of FM Radio without headphones. However, the headphones also worked as antenna. So, if you don’t have a strong FM signal in your area, you may not get any station. Some people resolved the problem by plugging the headphone adapter (the rectangular dongle) into the phone, and sticking the stylus into the adapter's headphone jack. This way, the stylus works as an antenna.
Sending MMS with AT&T: Run the Carrier Provisioning at Start > Tools, select ATT 2. The download and install this CAB http://forum.xda-developers.com/atta...4&d=1271445465 to adjust the maximum size to 600k.
Twitter tab: If you don't flash new ROMs very often, or if you get many tweets in a short period of time, you may want to clean them once in a while as ALL of them get stored on your phone, and this can cause performance issues. To do that, turn off Sense (Start > Settings > Home > Items > uncheck HTC Sense) and then delete the files in \Temp\twiteng\Db. Make sure not to delete any other files in the \Temp\twiteng directory. The other folder stores your log in token file. After doing that, do not forget to turn Sense on again.
SMS "traditional" look: If you don't like the new style of SMS in some of the EnergyROM builds (the "balloons"), you can revert back to the traditional one by installing this cab, ripped from the stock ROM.
Increase the Number of Allowed Recipients in Group SMS: The max number of default contacts to send a group SMS is 10. You can change it to 50 by changing the registry entry
HKLM\Software\Jataayu\Messaging\MaxRecipients
Change Windows Mobile SMS Client skin: To change the "skin" used for Windows Mobile SMS Client ONLY please follow the directions in this thread. For example: The Astronaut Manila skin is available as a .CAB and will revert your SMS style back to "default" or "original" style. Additionally, you may choose to further customize your own style by making changes to the CSS (documentation is in the posted thread).
Video Codec suggested settings: If you are copying a video to play on your phone, these are some setting a member successfully tested:
Xvid/Divx compatible (h.263)
File Extension: m4v or mp4
fps: 23.976
Resolution: 800x480 (400x240 for smoothest video)
Video Bitrate: 600-800 kbps
Audio Bitrate 128-192 Stereo
This was tested with AVS Video Converter. Results with other encoders may vary. VBR (variable bitrate encoding) will give better quality if you encoder supports it but will take longer..
Splash Screen: The splash screen is that initial screen that shows when you turn the phone on. Usually it shows "TouchPro2". Some ROMs change the splash screen, but EnergyROMs don't.
If somehow you changed your splash screen by either flashing a different one, or by flashing a different ROM that changed it, and you want to revert back to the original screen, download it from here. To flash, follow the same procedure you would execute when flashing a ROM.
NOTE: Performing Task29 DOES NOT erase your splash screen (or your radio).
Physical keyboard repeat rate: In Settings> Personal> Buttons, there is an "Up/Down Control" tab. There, you can adjust the repeat rate and the delay before repeating for all hardware keys (despite the name "Up/Down Control"). Both are set to the fastest settings on EnergyROMs.
Playing music with screen off: If you want to be able to play music with the screen off to save battery, install this cab. NO LONGER NEEDED AFTER AUG 22, 2010 as the change is already cooked in.
Changing the environment variables, such as default save path for cameras, documents, etc.: To change the default locations, go Start > Tools > Advanced Config> Locations and make the changes you want by either picking the right folder from the drop down menu or by clicking on "browse", and navigating to the folder you want, and then clicking on "Select". Do not forget to press "Done" in order to save your changes.
Increasing the in call volume: If the volume while in call is too low and you already adjusted the volume to the maximum, install this cab, and restart the phone.
Enabling Cingular Video for AT&T users: Apply the cab posted here.
Additional Tips & Tricks: Can be found on this post created by JVH3. It also has his reviews of ROM versions.
3 - SOLUTIONS TO ISSUES:
ATTENTION: IF YOU ARE OVERCLOCKING YOUR PHONE AND EXPERIENCING ANY ISSUES, FIRST OF ALL TEST IT WITHOUT OVERCLOCKING. A LOT OF PEOPLE HAVE BEEN REPORTING WEIRD ISSUES AND END UP FIGURING OUT THEY WERE BEING CAUSED BY OVERCLOCKING.
Lack of memory to run programs (aka memory leak): If you are running out of memory you may experience correspondent error messages, or find out that some programs are unable to open, or that they suddenly close. Windows Mobile and many applications don't handle memory well, causing your phone to run out of memory to process the applications. THIS IS NOT A DEFECT OF THE ROM, so please DO NOT post complaints, or bug reports about it. A quick solution is either multi-task less, or reboot your phone regularly to "recover" the memory. An excellent analysis with some suggestions was posted here http://forum.xda-developers.com/showpost.php?p=7005311&postcount=21054
Wrong physical keyboard configuration: If you are using AT&T or T-Mobile, and you are experiencing issues with the physical keyboard key configuration (FN not working, for example), you need to run the Carrier Provisioning that can be found at Start > Tools. Another alternative is to use a key remapper program such as this one.
Wrong or not getting “My Location” (on the Weather tab or Home): Your location is determined according to the cellular towers nearby. Depending on where they are and on the signal strength you are getting, you may see a wrong location. However, not all towers work for this despite the signal strength. Possibly they just don't send the request. Possibly they don't return the result. Some people reported that switching 3G off or off/on helped, but results vary. GPS and the ROM itself have nothing to do with it. An alternative is to add your city by clicking on the clock at the Home screen and then on Add City. The location feature depends heavily on Google's data about location. If Google's servers can't figure out where you are, your "My Location" feature will simply not work.
For people with AT&T: one member successfully fixed the location issue by installing the latest stock AT&T ROM (which updated the Radio and Rilphone) and then flashed the EnergyROM. His location then started to work fine. See his post here. MAY BE similar procedure would work for other carriers, using their correspondent stock ROMs.
ActiveSync unable to synchronize via USB: Some people reported that going to Start > Settings > Connections > USB to PC and disabling 'enable faster data synchronization' worked for them, but results vary. This issue happens more often with Vista/Windows 7.
ActiveSync showing error 0x85010013 on the PC while trying to synchronize, unable to contact Exchange: Try the solution posted here, which was reported to have resolved the issue.
Incorrect unread count (SMS or e-mail): Normally this is caused by a PIM backup that was restored. Two solutions (a procedure and a cab) can be found here. Microsoft My Phone (under Start > Tools) is a better alternative to backup your PIM and other things such as documents, music, pics, etc.
Incorrect unread count (voice mail): Leave another message for yourself, retrieve and delete it. It should resolve the count error.
Phone showing there is a voice message but there is none: This may happen once in a while. To clean it, leave a voice message for yourself, retrieve it, and delete it. This will clean the notification.
Lack of weather updates: Sometimes the default weather server is down for a while and updates fail. An alternative would be to switch to Conflippers weather server, or enter your own in. The Weather City Editor created by JVH3 has that option, and can be found here.
Displaying some non-English fonts: If you installed a non-English font (like Chinese) and is having issues, or if you prefer the old font used (Tahoma) than the new one (Calibri) try this fix by changing this registry entry: HKLM\System\GDI\SYSFNT\Nm =Tahoma or by downloading and installing this CAB. Either way, perform a soft reset afterwards.
Strange characters on Quick Shutdown: If Quick Shutdown (the application that runs when you press and hold the power button) shows strange characters and you have changed your Regional Settings to something other than "English (United States)", then you will have to install a more current version of Quick Shutdown that supports other languages. It can be found here.
Difficulty in getting a GPS satellite lock: You may want to try this solution, which uses aGPS to obtain a faster lock. If you want to automate it using XDA_UC, check this post here.
Call waiting issues: There has been two types of call waiting issues identified:
1- Some people reported that their phones do not get a call waiting beep when they are on the phone and there is another incoming call. If you are experiencing this problem, a solution was posted here.
2- Others report that instead of getting a call waiting tone, the second call causes the first one to drop. In such case, the solution is here.
Garmin not working or freezing: This is caused by Ameba's position fix. Make sure Garmin (My Device/Garmin/que.exe) is in the exception list for position fix (NOT close button exception) or disable position fix. Access the options for this using the X-Button application in the Tools folder.
XML file not working with XDA_UC: Make sure it is in unicode. For details see http://forum.xda-developers.com/show...56#post6312056
Opera displaying an error message every time you boot the phone: If every time you power or reset your phone you get an error message such as "You tried to access the address file://localhost/at, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page", and your ROM is 21xxx, this may be due to PushInternet being enabled by default. In order to disable it, install this cab.
Stuck at "Launching HTC Sense...": If you get stuck on this message or if Sense is not loading even though it is checked under Settings > Home > Items, try deleting the folder "Application Data\HTC\databases" on the SD card, if any. Sense will recreate it and it should work fine. If you want an application to do it for you, check this post. NOTE: In the most recent EnergyROMs some changes were made and this folder may no longer exist, what is normal.
Freezes: This post addresses several possible reasons and solutions for freezes. Attention: Overclocking your phone may cause freezes. Test it without overclocking to figure out if OC is the culprit.
Problems with SD card: If your SD card has problems, it may cause the two issues listed above. If you want to check its integrity and fix any issues, please follow the steps on this post.
Wrong SMS Timestamp: If you are receiving text messages (SMS) with the wrong timestamp, what may cause them to be in the wrong order, a solution was posted here.
Unable to add a contact from the dialer: On the Aug 28 ROMs, there is a problem with Sense that prevents adding a contact from the dialer (someone calls you and after the call you want to add that person to your list of contacts). This should not be a problem in the most recent ROMs, but if you experience the problem you can use Pyrorob's fix, which can be found here.
Wrong time: Several people outside of the US reported problems with time after the US changed to/from daylight savings time (aka summer time and winter time). If your clock is one hour (or more) ahead or behind, do not use "get carrier time" and disable "automatic change time zone and clock" in personal -> phone settings.
Non-Transparent Contact Background: In some of the recent ROMs the Contact page has some reddish background that makes it difficult to read. The solution (a cab) to make it transparent can be found here.
4 - SUGGESTED SEQUENCE TO INSTALL A NEW ROM:
When flashing a new ROM for the first time, first disable XDA_UC or anything else that automatically installs or configures the ROM. Simply do the carrier selection when it comes up.
Download new ROM
Disable XDA_UC and the like
Perform Task29 on the phone
Enter Bootloader
Flash the new ROM
Select carrier
Do some basic testing
Set up some basic stuff manually
Do some testing
If all goes well, and you want to ensure XDA_UC is working fine, you can then re-enable XDA_UC and then Task29 and flash again. If you then seem some odd stuff (like Sense not even loading) you can start to troubleshoot your XDA_UC stuff.
Also, be careful with what other programs such as SPB Backup, PIM Backup, CHT import, Sashimi, etc. restore, as sometimes things don't translate well from one ROM to another.
5 - HOW TO POST A QUESTION ON THE THREAD:
First and foremost, read at minimum the last 2-3 days of posts on the thread to make sure the question was not already answered. If that does not help, then use the search feature of the thread. If nothing is found, then post your question to get help. In the majority of the situations, someone already experienced the problem and a solution was already posted.
In order to get help from other XDA members, when posting a question please make sure to include at minimum:
The ROM you have (Sense 2.1 or 2.5, build, date)
The device you have (there are variants of the Rhodium)
The Radio you have
Your location
Your service provider
The steps you took to get to the problem so we could try to reproduce it
If you tested it with a bare ROM to confirm it is not something you installed/restored
Any pictures showing the screens affected (if applicable)
6 - HOW TO REPORT A BUG:
If you believe you found a bug on the ROM, please report it by sending a Private Message to me, and I will compile a list to be sent to the Chef.
Please make sure to include the items listed above on #5, plus any potential solutions you may have identified.
ATTENTION: IF YOU ARE OVERCLOCKING YOUR PHONE AND EXPERIENCING ANY ISSUES, FIRST OF ALL TEST IT WITHOUT OVERCLOCKING. A LOT OF PEOPLE HAVE BEEN REPORTING WEIRD ISSUES AND END UP FIGURING OUT THEY WERE BEING CAUSED BY OVERCLOCKING.

XDA_UC FAQ

The XDA_UC cooked in my ROMs is modified from the stock XDA_UC made by Noonski. Great addon, by the way... Noonski did a great job with this !
The version in my ROMs is trimmed down to fit the needs of my ROM series.
Some of the extra features are:
It will copy shortcuts (.lnk files) found in \XDA_UC\Start Menu\ to the device's start menu folder (\windows\Start Menu) in the hierarchy that it finds on the storage card. For example: Let's say you have a navigation package on the storage card, like Navigon. If you make a shortcut to the navigon.exe file as Navigon.lnk and copy it to \XDA_UC\Start Menu\GPS\ as "Navigon.lnk" then on a fresh ROM install it will copy any shortcuts it finds there to the same location on the device, so it'll end up in \Windows\Start Menu\GPS\. This works for other folders on the Start Menu as well. Just put the shortcuts in \xda_uc\Start Menu\ in the folders you will like the shortcuts to appear to, on the device.
It will copy a custom splash screen from \Storage Card\XDA_UC\welcomehead.192.png to \windows automatically and overwrite the one in the ROM.
It will copy a custom Sense background found in \Storage Card\XDA_UC\sense\wallpaper_sense.png to the device and set that wallpaper as default in Sense. So rename your wallpaper as "wallpaper_sense.png" and drop it in \Storage Card\XDA_UC\sense\ and on the next ROM flash that wallpaper will become your wallpaper in Sense.
Other than that XDA_UC works as designed by Noonski and it will do the following things:
It will automatically import your PPCbackup (*.pib) file found in \Storage Card\XDA_UC\
It will install custom XDAS scripts found in \Storage Card\XDA_UC\
It will silently install CAB files found in \Storage Card\XDA_UC\
It will install special CAB files that require user input (such as Agreements or any type of prompt) found in \Storage Card\XDA_UC\SD
It will silently import REG files found in \Storage Card\XDA_UC\
It will silently install REG files found in \Storage Card\XDA_UC\Exporter, as exported by my own Settings Exporter, ONLY if the "automatic" file is also present in that folder (and it most cases it should be, enable that option in the Settings Export application's menu)
It will silently import XML files found in \Storage Card\XDA_UC\
It will silently import CER files (usually Exchange certificates) found in \Storage Card\XDA_UC\
It will silently run custom MSCR files found in \Storage Card\XDA_UC\
That's it, but don't forget to checkout the Addons folder and look in the XDA_UC section for tips and tutorials on how to export your email/wifi settings and various little .reg and tweaks you can add to your XDA_UC collection.
As always don't forget to check what installs automatically before reporting a problem with the ROM. Most of the time, if you notice you have a problem that nobody else is experience is because one of the cabs you dropped in the XDA_UC folder is installing automatically while you don't even think about it.

Which differences is there between the Genesis EnergyROM and this one (Leo) ?

lancelot54 said:
Which differences is there between the Genesis EnergyROM and this one (Leo) ?
Click to expand...
Click to collapse
Great first post lancelot54
Genesis is running on TF3D 2.1 and Leo is running on TF3D 2.5 (beta). Just check the screenshots, that will clarify things...

dipdap said:
Well I installed the radio version 4.46.25.24. At first it didn't solve the problem, so I gave it a rest, but an hour later it worked!
So now it is updating.
Thank you guys for the help!!
Click to expand...
Click to collapse
Is this with 3g enabled?

tested 3 diff roms in past 2 hours and back to this as this is the best...

kappo78 said:
To sort the text messaging issue out, go to the wvga tweaks and set it to wake up the device on new sms.
Click to expand...
Click to collapse
Ok ive set that and ill see how it goes.
To get around the Manila mail been slooooow ive now copied the tmailsms.lnk from the windows dir and placed it in the start menu, programes folder. I then went into the properties and unticked hidden and system and ticked read only (had to do this because it was getting deleted everytime i soft reset). I also renamed it just to "Mail". Now i can set it to one of the quick link tabs on the home screen.

EazyVG said:
Just one question, as I got my TP2 in Russia,
Click to expand...
Click to collapse
You must install first CAB and after install, do not soft reset and install second CAB:

pressing f5 every minute

he guys give NRGZ28 the time he will releas ohter great rom I am so devastated ??? why have some patience
grtz weesje

If you have twitter activated on your phone and follow our Cook, you will know first hand on the latest from him, because he tweets first before going to this forum. Don't forget to check "Download tweets automatically" in Settings to be notified.

jezi said:
If you have twitter activated on your phone and follow our Cook, you will know first hand on the latest from him, because he tweets first before going to this forum. Don't forget to check "Download tweets automatically" to be notified.
Click to expand...
Click to collapse
don't use twitter. Never understood why I would like to follow somebody's twitting:
"just brushed my teeth"
"Watching TV LOL"
"Tired"
"Going to sleep"
"Woke up"
wtf

CandyAndy said:
pressing f5 every minute
Click to expand...
Click to collapse
Don't you guys have a job or something? I'm eagerly awaiting the new rom as well, but I've only had the time to watch for a new one since 10 hours ago.

I would assume any time that takes longer than normal would end up being a full update because when he just tweaks and adds packages its usually done daily so think of it that way the longer you wait the better the new rom must be because it takes longer to cook in a new version of manila or 6.5 than it does just to tweak and add updated packages. So wait in anticipation of somthing great when it takes a while. And let the man breath, please I fix phones and computers and run a video store and working for other peoople is gratifying but hard and tireless work so let the man relax.

New ROM comin soon!!!
wahida76 said:
Been awake since last night refreshing page every 10 mins but nothing whats up with that? any way lets hope it comes out soon
Click to expand...
Click to collapse
From NRG on the 2.1 Thread: Originally Posted by NRGZ28
I'll think about reverting back to the stock behaviour for email accounts. I just having to see the account picker everytime I open my email. With that said, the new ROM is coming today. I've got it finished and it's goooooood.
Whoooo hooooo!

[WM6.1/WM6.5.x]«HERMANN» | RELEASED ROMs: WM6.1 v3.0, WM6.5.0 v3.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I must stress that your phone must be HARDSPL'ed in order to flash my ROMs. Also, read this post for updated flashing instructions.
THIS ROM IS ENGLISH WWE ONLY and don't forget to backup your various info (contacts, documents, etc). Users of Palm Messaging can backup their SMS messages by looking for "PalmMsgV001" in the windows folder. Unfortunately, reading this file can only be done with Palm Messaging, so copy/paste anything of importance before flashing.
Special note: Bluetooth file sharing now works GUARANTEED in all 2.5 and up ROMs, and remember that the "receive all beams" option in the Infrared settings is on by default, if you don't use Bluetooth don't forget to turn this off.
V3.2 Hermann Classic
Version 3.0 updates:
-Please refer to this post regarding changes.
-The stuff you know from Version 2.5 is still in, but with complete bug fixes.
-No more "BASE" or "Full" ROMs.
-Storage is low because ROM is XPR compressed for AltKeys.
-ROM is designed to work with toxic's Android UI packs (Not fully tested)
-Symbols SIP added in case Alt Keys does not work. This can be accessed via the "up" arrow beside the SIP keyboard icon when the SIP is active.
Version 3.1 update:
-Sped up image processing on the device.
--This boost in image processing brings a significant overall boost to the device's operation, including faster camera image capturing, JPEG viewing, and perhaps a boost to the 2D graphics rendering on the device (over 100 points boost over non-Hermann ROMs in SKTools graphics benchmark), making emulators such as MoonGBA able to play games like Megaman Battle network 95% speed (frameskip 1, no sound due to slow cpu)
-Fixed fatal Camera launching bug.
Version 3.2 updates:
-Hopefully I finally fixed the fatal Camera bug.
-Fixed missing "USB to PC" setting.
-Fixed Windows Live, am able to log into my Live account. (Don't forget to check your APN in "Connection" settings)
-PATCH: Want to enable the Ringer Switch at the top of the Treo to vibrate when you receive a call? Read this post.
-Themes: Want the rest of the default WM6.5 themes? Click here.
__________________________
VERSION 3.2 ROM Build 21895
51.49MB available user Storage
23MB available RAM
DOWNLOAD 3.2 ROM (Do not forget to soft reset the device after "Device Customization" finishes!)
__________________________|
__________________________
Consumer ROM Build 21916
48MB available user Storage
23MB available RAM
DOWNLOAD 2.4 ROM
__________________________|
Version 2.4 features:
--I gave Fjtor's kitchen a try
--Start Menu at the top
--First Treo750 ROM to utilize Bepe's Big Storage
--As I promised, HTC's 21889 Build is used for Fast Stable use
--Bluetooth file sharing ready
--BASE ROM is a bare ROM, great for users who want to install their own stuff
--Consumer ROM has basic stuff to get you started, such as Marketplace, Windows Live, Ringtones, xTask, and others
V2.3 Hermann Finger
2.3 Updates:
-Fixed ringer notification bug
___________________________
Hermann Finger BASE ROM
66MB available user Storage
23MB available RAM
DOWNLOAD ROM
___________________________|
___________________________
Hermann Finger Consumer ROM
50MB available user Storage
24MB available RAM
DOWNLOAD ROM
___________________________|
Features:
--These are primarily experimental ROMs.
--Start Menu at the bottom.
--Also cooked using Fjtor's kitchen
--Also utilizing Big Storage.
--Build 29007 is used here
--Bluetooth file sharing ready
--BASE ROM is a bare ROM, great for users who want to install their own stuff
--Consumer ROM has basic stuff to get you started, such as Marketplace, Windows Live, Ringtones, xTask, and others
_________________________________________
KITCHEN FILES (NEEDS FJTORSOL'S KITCHEN) Read this post for more info. NOTE: These are the old 2.4 packs)
Big Storage (This archive must be extracted to "\Sources\Devices\HTC Cheetah\Profiles")
http://www.mediafire.com/?uhmxn1j7aj0fsgf
UPDATED PACKAGES February 29 2012:
http://www.mediafire.com/download.php?57nedd9e7i131fr
Attached to this post is the 4-row Start Menu grid settings unique to the Hermann series of ROMs, so now you too can have more icons onscreen! Instructions are in the .txt files in the archive.
___________________________________________________
<<<<<<<<<<<---WM6.1 HERMANN--->>>>>>>>>>>
The best WM6.1 ROM you will ever see for the Treo
Version 3.0 updates:
-Please refer to this post regarding changes.
-The stuff you know from Version 2.5 is still in, but with complete bug fixes.
-No more TouchFlo because the ROM is already finger-scrolling enabled.
-XPR compressed
note: Popup menu font too big? Read this post on how to change it.
note: Unable to set USB cable settings? Read this post on how to fix it.
PATCH: Want to enable the Ringer Switch at the top of the Treo to vibrate when you receive a call? Read this post.
__________________________
Build 20771
58MB available user Storage
29MB available RAM
DOWNLOAD 3.0 ROM (Do not forget to soft reset the device after "Device Customization" finishes!)
__________________________|

Old release news
Features in both builds:
Version 1
--Added single click side button functionality, customizable (default: camera)
--Registery cleaned up.
--Renamed "Storage Card" to "Mini SD".
--Enabled full screen option in Camera (it just removes the WM UI though)
--Palm messaging has been replaced with default MS inbox. Now SMS can be backed up or defaulted to 3rd party programs like Flexmail.
--Start menu has been optimized for speed. Because of the extra speed, 4 columns are introduced instead of 3, giving users less to scroll through and more content (and back to the normal speed).
--Red button functionality is full like WM6, including radio power off.
--xTask is streamlined into the OS as an EXT package. This program is your task manager, in Hermann Finger use this to intercept tapping the Start icon if your hardware button is dead.
--Both builds can be connected to Windows Mobile Device Center (tested on Windows7 Home Premmy 32bit). As I unfortunately cannot use Outlook, do let me know if that works.
Version 2 additions:
--For the first time ever, the Splash image when the phone is starting has been changed.
--Thanks to Big Storage, even though the ROM was compressed to XPR, it's fast and not using too much storage space.
--Pagepool is now 6MB, Fast is fast
--The Startup sound returns to Windows Mobile! Customizable, and can be disabled if a personal touch to your phone is unnecessary.
--Added Microphone AGC. Greatly enhances voice recording, and perhaps even phone calls.
--Added Clear Storage. Why Palm never had a software method to Hard Reset I'll never know...
--Added Keylock. It sometimes helps to lock the Green Button and the Start Button from turning on the phone. Funny, isn't it? At least on my phone.
--Taskbar icons modernized,adding Bluetooth display functionality
--Includes Arcsoft MMS 5.2.2.66
Version 2.1 additions
--This time Version 2.1 was cooked using Fjtorsol's kitchen. There are a few pros and cons, pros like working shortcuts, cons such as the inability to use network time (my V2 build could, but not 2.1). Note that Version 2.1 also has Fjtorsol's features.
--Some of Fjtor's features were upgraded, such as App service to 1.87.0.0, Arcsoft to 5.2.2.66, Sim Toolkit Svc to 4.93.0.2, Sim Toolkit UIPPC to 4.73.0.0, and USSD Service to 4.36.0.1.
--Like I promised, build 21889 has been tested for over a month and it's ready for use. This build was released in December 2010 from HTC, as you can see it's very fast and it totally smokes my Touch Pro. The \Windows\ folder loads in about 1 second, compared to Energy's ROM on my Touch Pro at 3-4 seconds.
--I decided to do 2 versions, a BASE ROM and a Consumer ROM, simply put, the BASE ROM is for users who want to install stuff themselves (like Windows Live), and the Consumer ROM is great if you want a lot of Microsoft services ready to use, such as Windows Live or Microsoft MyPhone. BASE ROM has a lot of storage available, Consumer ROM has 20% of that used up.
--Bluetooth file sharing is ready and it works, and you don't need to enable "accept all beams" in that Infrared setting. I have tested receiving a file from a Samsung SGH-D807 Simple Phone, all you need to do is "enable File sharing" in the FTP tab of the Bluetooth settings.
--Storage Card is the default name now, I was too lazy to change to MiniSD
--Version 2.1 retains Clear Storage and Microphone AGC, available in both BASE and Consumer ROMs.
--Both ROMs have Zip Mobile 2010 version 1.2.3.1.
--Pagepools are set at 6. Remember to change it depending on the kind of work you use your Treo for.
--Unfortunately, due to me using Fjtorsol's kitchen, the ROMs are compressed in LZX, I have no idea why my kitchen can use XPR at the same size Fjtor's does with LZX. So I stuck with LZX, which doesn't matter to Build 21889, because it's still fast
Fixes from Version 2 to 2.1
-Thanks to Fjtorsol's kitchen, shortcuts are no longer mysteriously deleted or cloned.
-Bluetooth file sharing used to be dead in Version 2. Fixed in Version 2.1, remember to enable file sharing in the FTP tab.
-
Fixes since V1:
-[Hermann Classic]Fixed "Phone" icon in Start Menu that pointed to nowhere when tapped.
-Deleted dead SMS tone setting that didn't work
-Added missing "Brightness" icon in Settings Panel
-Added Missing "Keyguard" icon in Settings Panel
-Removed Palm's simple Ringtone settings, enabling the more customizable Windows Mobile ringtone settings
-When mapping the side button, there was no icon. Icon now defaulted to Camera.
-Option+OK mapped to XHook.
Known bugs:
--Due to my dependence on VolServ, the Ringtone settings for "Phone: Known Caller" retains that bug all custom ROMs have, which doesn't matter what kitchen you use. A fix was to remove the registry settings linked to VolServ, but then half the system will not work. To remedy, simply select the ActiveSync settings, then back to Known Caller and you'll see the real settings.
--The Caps/Shift keys icon that shows up beside the little keyboard SIP icon is gone. I discovered it is Theme related. I fixed it at one point during the Real Power Button testing, and it did show up. I can't seem to redo that without killing some things.
--In Fjtorsol's ROMs, I was unable to get time settings from my wireless carrier. I have confirmed this to be a problem with the type of ROM used as a base, as my V2 ROMs were based on Palm's 2.30 ROM, which supported my wireless carrier's network time. Unfortunately, because I used Fjtor's kitchen, this "bug" carried over to my V2.1 ROMs. This is a problem if you use programs that utilize Windows Mobile's Cell ID location-based service.
--Theme was removed from Hermann Finger. [Hermann Finger] The HTC Black theme (originally for WM6.5.0)seems to work at first, but changing to a different theme and back leaves the bottom bar and other 6.5.3 icons missing. I consider the HTC Black theme as a one time gig, apparently, since I cannot edit the theme as WinCE cab manager needs to be registered before I can fix it.
--Random? [Hermann Finger] With the enhanced top Taskbar, sometimes (it happened to me while locked to 3G) when you turn on the Radio, the signal appears empty (as blank, 0). There still is a signal the same as your last level, and your network type (3G, Edge, GSM) will still be shown, and you can still make calls. Hermann Classic did not have this problem, which it actually had a much cooler feature, remember when you turn on the radio, and try to access the "Phone" settings, and the Treo will tell you "the Phone is busy, wait 15 seconds", well in Hermann classic, I observed it to not show the signal strength until the Phone is ready. Might not happen often, but it was really cool.
--No more Splash screen. The Hard Reset function (Hold Red Button + Reset button) may look blank, or glitched, but it still works. Apparently Palm never thought Big Storage was possible
--The HSDPA icon that displays when you are actively downloading on HSDPA is gone. Or rather, Palm's Dial Lookup was the original source. don't worry, when that 3G icon turns into a funny looking icon, you are still on HSDPA.
--Fixed. BASE has no rings, Consumer does. Only 3 ringtones? Apparently, keeping Dial Lookup, Active Call, and my mod to remove Palm Messaging keeps it this way, no matter how I tried to cook the rings into there. Don't worry, you can still add your own ringtones, preferably into the \My Documents\My Ringtones folder.
--Fixed via Fjtorsol's kitchen. [Hermann Finger] There is again 2 MS Office folders. Both work the way they should, but forgot to delete it as I had already uploaded the ROM...
--Fixed. Kept VolServ in the ROMs because it controls a lot more than just sounds. [Herman Finger] The following sounds seem to not work: MiniSD card insert and remove, and Charger connected and removed. It actually is controlled by Palm's Volume control service (the little pop-up volume window that open on the top left), which I had removed in Hermann Finger.
--Fixed from Fjtorsol's kitchen. [Hermann Classic] 2 battery bars. Tried automating showing the clock up top, but for some reason it doesn't like me
--[Hermann Finger]The ALT key symbols window still has the redraw bug, just use D-pad to select. I fixed that as well while working on Real Power button, and I admit, I forgot the change I did :/
--[Hermann Finger Consumer ROM]Input Panel shortcut is gone, which means you can't edit typing options

FAQs, How to's, and more
Q: So explain to me the Sleep of Death
A: Existent in some WM 6.5 builds, even for other devices, Sleep of Death occurs when you power off the phone either via software or the Red Button, and the phone cannot power on in any way whatsoever, power button, plugging it in, etc. Currently, I have not experienced this in Build 23563, but in Builds 21901/21915. This is probably solved by my battery polling customization, although if it persists, disable auto turn-off for either battery or AC, or you'll have to change your brightness setting due to Palm's Backlight bug. Do note that my Treo's have worked past their service life, and their batteries are less the capacity than they used to be.
Q: What is the Backlight bug?
A: Existent even in Palm's OEM ROMs, the backlight bug is when you have your brightness set to 2, sometimes even 3 (The backlight is rated by 0 - 10, 0 being off, and 10 being the brightest). The Backlight bug occasionally refuses to put the device on standby (more often when plugged into AC), or even turn off the backlight. This is a hardware problem because if you set your Brightness to 2, and put the device on standby when running on battery, you can turn on the device again if you toggle the ringer switch (the switch on the top of the phone). This is a persistent hardware bug, which existed on all the 4 Treo's I have touched so far. (it's how I turn on my keyboard-less Treo)
Q: Can you do ____ language?
A: All my ROM's support multiple languages (although I have never tried making ones other than English). All I would need is the Palm OEM ROM of the language that you want done, then we'll see.
Q: What Kitchen did you use?
A: I use OSKitchen Zero.
Q: Will you upload your kitchen?
A: As you may have heard, there's a ridiculous bandwidth limit on the wireless carrier I currently use (800MB). My kitchen folder reaches 2.02GB (size, not size on disk), and uploading that is now impossible. Even if I separate the parts into individual folder, it's still going to add up to much more than 800MB. So sorry, the idea of uploading my kitchen was only in the event I could not continue. Well, I've gone as far as completed
Q: What happened to Build 21915?
A: It had a fatal bug that would not load some programs, notably .Net CF programs.
Q: Build 21901 help! How do I get rid of that second battery bar?
A: Go to Clocks & Alarms in Start ->Settings->, and then tap that "more" tab, and then check "Display the Clock on the title bar in all programs"
Q: Why can't we tap the Start icon in WM6.5.3?
A: Basically, it's the fault of Palm's OEM today plugin "Active call". This plugin is responsible for the handling of calling-related features of the Treo, from the dialer skin, to the today-screen Softkey options, to the speakerphone activation, to anything that displays call information. Why it interferes with 6.5.3 is best explained in detail. As you may not have known, Windows Mobile is an interesting platform in one respect because of how highly customizable it is. The Palm designed OS is layered like this:
--- <-Palm Active Call Today Plugin
--- <-WM Today theme skin
--- <-Underlying OS
As you can see, Palm's Active Call plugin is covering the Today theme in who handles what the user touches. So when we click on the Start icon, it looks like we pressed it, but we didn't because Palm's plugin is designed for WM5/6, which has a normal softkey bar at the bottom. Their Left Softkey is overlapping the Start icon, so to the OS, we are pressing that spot on the UI, but Palm's plugin is intercepting what it launches by launching nothing, since it was programmed to not launch anything at those coordinates linked to the OS. This can be easily seen by tapping on the xTask icon, and then tap on the Start icon.
Q: So why did you make the Start menu faster and 4 columns?
A: Well, I was a big fan of that start menu layout changer I got here at XDA-devs, but it didn't work on our Treo's. I don't know why it doesn't work, as it works on my hx2415, but I set out to manually edit the Start menu myself. While I will maintain the secret of what I believe made it faster, I decided a 4 column layout was best because, with a 3 column layout, it takes longer to scroll because our screens are about 2.5 inches, which is really not a lot of real estate for the primary scrolling finger (our thumbs). So if you are wondering why it lags a bit, that's because you are seeing 8 full icons and 2 half icons, compared to only 6 in the 3 column layout, and the device scales the icons depending on their default size (program dependent).
Q: Can you take out ____ program?
A: Due to my lame internet connection, I can't be doing things that could break 1 person's functionality, while helping 1 person's desire. I try to do a ROM that works for the general user, and not for a power user like me (It's why I didn't see the SMS tone bug until later, because I didn't care for that :S)
Q: Huh? XPR compression?
A: ROM's are loaded onto a device in 3 types, a non-compressed ROM image, a compressed ROM image, and a Super compressed ROM image. non-compressed uses up a large amount of space, a compressed image (XPR) uses about half the space available to the Treo, and a Super compressed (LZX) image uses even less space. These of course, have their drawbacks. Uncompressed ROM images uses up a whole lot of space, but is quick to access the Windows Mobile parts. XPR is compressed to fit in a reasonable amount of space, and is a bit slower to access than uncompressed. LZX is tightly compressed, and while you use up even less space, the ROM is very tightly packed in that the CPU needs a little more extra time to read WM elements of the OS. An example is like this, between XPR and LZX, say you have a box, and you put things in it. If you stuff it with as much as you can to save space (LZX), you may have saved space, but trying to get things inside that box will take a little more extra digging. With a more tidy stuffing of the box (XPR), if you properly set things inside the box, accessing the things inside will be much quicker.
Q: Explain to me "Big Storage".
A: I made a graphic explaining this, but basically, Big Storage is the removal of the ExtendedROM partition that exists in the HTC devices during the Hermes era. The ExtROM is what holds Carrier-specific settings/bloatware that you see in the Palm OEM ROMs. This is a problem with Custom ROMs, because we use the "unbranding" procedure to delete the stuff in the ExtROM, but the partition itself is not deleted. This is where Big Storage comes in. Big Storage has no record of the ExtROM whatsoever, so it re-formats the rest of the available storage as one whole Storage space for the user to use. I have seen this have a great boost in speed with the Operating System, as the device no longer has to mount (and hide) another partition on the Flash chip. So far no other ROM besides my Hermann series has been able to do this.

Great to hear! looking forward to seeing how you get along =)

waiting for first beta release!

So, a little update, ironically enough because internet on my phone is down so I decided to use expensive tethering to let everyone know I'm still alive XD
I'm glad I decided to take a working keyboard from my good Treo and put it in the bad Treo, my repaired Radio antenna had to be re-repaired so now I can leave the keyboard on there (still did not get replacement keyboard). That gave me a chance to test the buttons on my WM6.5 build, and the "Alt" key works, and brings up the symbols list. Red phone button still does not work (don't worry, I do know why), also I realized the Phone Settings is still there, just need to re-work the shortcut to point to it. Still trying to solve the SD card problem, so now I need to raid Nav's post history lol.
Edit: Nav's post history needs to be searched by not just his posts, I even need to read if others replied to him. If anyone can help me out and remember or able to see what it is that causes the Sd card problem, I'd really appreciate it (my connection is timed -_-)

Hey guys, I got a great story to tell.
You guys might not know me very well, I mean, I rarely posted here before, but if I had to say something about me, it's that I'm not the type of person to ask help on how to do something, if I can do it myself. Well, last night, I tried and tried, and even dunked myself into bed and immediately fell asleep (narrowly escaping catching a cold because of no blanket lol), but I persevered, and now look what I have done!
That's right, build 23563! Better than Mietas' ROM because tapping the start menu works, but just like Mietas' ROM, closing Messenger with the lower right corner close button still freezes the program. And... since I have been using Nav's badly configured files (no offense Nav), the SD card bug remained. There was even the camera bug, and the WM player that never was. I didn't give up though, thanks to Mietas' discontinued ROM project, I have craftily taken his romhdr.bin and stuck it into my kitchen. I also realized why the Camera didn't work and why WM Player was gone. Now, I present to you, the first real working WM 6.5 Rom for our Treo 750's!
"Gee whiz mangatron, you went back in time? How is that the best working WM 6.5?" you say? Well, look here!
See that? It's the Palm OEM applications running! I can make calls, send TXT messages and recieve them, you can hang up calls and, you can POWER OFF the phone! Brightness setting via Fn+p works too! Yahoo! That's not it though! The SD Card can now be recognized, the Camera works, and WM Player is back again! Absolutely the best WM6.5 for our Treo's yet!
But there's still more. See, as much as a noob that I am, I hadn't realized until build 23563 on why the Palm OEM stuff wasn't running. You see, I already knew why Nav's ROM couldn't hang up or power off. Thanks to my older brother for testing this when he had my Treo, the today plugins "Active Call" and "Dial Lookup" are Palm programs, that, one or the other (or both combined) control brightness setting, hanging up, keypad dialer, speakerphone enabler, etc. PRetty much all phone functions were handled by these 2 today plugins. When Nav took them out, it killed his phone functionality. I knew that without these, nothing will work the way I want it to. I didn't do this alone. If it weren't for Nav and Mietas for trying before me, I could have never learned how to cook, and most importantly, I would have never had tried 6 months ago had I gotten a new phone then.

Now, I hope everyone understands why I didn't upload it yet (expensive tethering is the only way to safely upload without risk getting cut off). There are also other reasons why, namely, how I found out why build 23563 didn't have my Palm OEM's. You see, during the cooking process, I noticed I had a lot of bad lines in the RGU file for the Palm OEM APPS package. So everytime I flashed my rom, I didn't see the Palm today plugins because by default, the registry turned them off! So I installed SKtools, enabled them, and boom, working Treo. So, if everyone is fine with manually turning on these 2 plugins by themselves, then okay, version 1 here we go! Except, I need to tell more about this ROM. You see, because I took some .bin files from Mietas' ROM, my build is now slow like his. Well, it's not laggy I-want-to-freeze slow, it's just, think back to WM5. If you had the Treo with WM5 before, you'll know what I mean. When you tap stuff it would like peel or what I like to call "blink". The problem could be because I set the page pool to 4MB (known to save RAM, but slow down multiple program usage), so I will try with a page pool of 6MB. That's basically the only caveat, actually. The rom is a tiny bit slow, but if you can live with that, and want a real working WM6.5 now, then I'll see. I have planned to tether this coming Monday or Tuesday GMT +8 (that is, Hong Kong time), so who knows, I may even pull a Spiattie here and provide both a Classic (21915) and Touch (23563) versions!
Note to Roberto: Luckily, Keyguard can be disabled. But I have not installed S2U to see if that will lock on power down (even with Keyguard disabled, the Red button can still power off). Let me know if S2U can lock when the device goes to standby, right now I am so excited to have finally helped out XDA when it comes to the Treo 750!

good work! i'm waiting for classic version!

hey great work!!! is there anyway you can make your perfect working wm6.5 rom with wm6.5.3, its just that wm6.5.3 looks so awesome!!!!!! but more than anything thanks for your effort i think you are the only remaining chef for our treo, but there is still this problem of titanium i know that ytou just started and thats why you havent added it but, whenever you add it there may be some problems that you may need to deal with, still this is the best rom i have seen so far and i can live without titanium, oh and about the s2u i dont see any need to install it right now as the normal lock button is working, but still it looks pretty cool maybe we should just put the download link next to the rom, as some people may not like it
the biggest problem at either some people may not like an app, they may want more memory instead of the app, or it is a pain in the ass trying to update that app later.
and about the wm6.5.3 maybe could you leave the fonts as they are? is just that in wm6.5.3 when you open a list the letters are just to big also when you open a menu and as our treos screen is so small... maybe it could be wm6.5.3 with wm6.5 fonts for menus and lists
if pics dont show here are the links
http://s124.photobucket.com/albums/p31/mangatron/?action=view&current=21915-2.jpg
http://img101.imageshack.us/i/201008080432440005111g.jpg/sr=1
maybe im going a bit to fast but i tend to go directly to the point when speaking sorry if im asking to much

Roberto 1234 said:
hey great work!!! is there anyway you can make your perfect working wm6.5 rom with wm6.5.3, its just that wm6.5.3 looks so awesome!!!!!! but more than anything thanks for your effort i think you are the only remaining chef for our treo, but there is still this problem of titanium i know that ytou just started and thats why you havent added it but, whenever you add it there may be some problems that you may need to deal with, still this is the best rom i have seen so far and i can live without titanium, oh and about the s2u i dont see any need to install it right now as the normal lock button is working, but still it looks pretty cool maybe we should just put the download link next to the rom, as some people may not like it
Click to expand...
Click to collapse
Believe me buddy, you are not asking too much. My regret right now is that I cannot upload right now, and that if only I had done this 6 months ago Treo users wouldn't have had to wait for so long to have WM6.5 on our phones.
Some things I need to clear up, lol the reason why the Palm plugins "Active call" and "Dial Lookup" were disabled in my tests builds, is because Titanium overwrote their registry settings because, whenever Titanium is enabled, no other plugins can run on the today screen. So I had to take out Titanium for good, just so that the Palm plugins can run.
About S2U, you're right about RAM, WM6.5.3 uses up more by default (my suspicion is the Theme), so including it would probably make only 20MB RAM available lol.
and about the wm6.5.3 maybe could you leave the fonts as they are? is just that in wm6.5.3 when you open a list the letters are just to big also when you open a menu and as our treos screen is so small... maybe it could be wm6.5.3 with wm6.5 fonts for menus and lists
Click to expand...
Click to collapse
You know, I'm glad you asked me about this. This is controlled by the .tsk file and the .png images that make up the Classic Blue today theme. As long as I reconfigure the .tsk file (not sure if my WM5 skinning program can support WM6.5.3) and edit the images into a smaller size (should work, I did a little test and the menu now looks like just a slightly larger WM6 menu), it will be usable.
Really want to upload now >___<

well as long as it works fine, and has wm6.5.3 i dont really need titanium

Post #2 contains my changelog for now, as you can see I'm really working on the bugs right now. As of this moment, all bugs have been taken care of except the memory leak, but man I really need that keyboard replacement. It's tough always flashing via USB...

i have an 4gb micro sd but not a converter... -.- thats why i always flash via usb, i think it is safer and more easy to use
i cant wait to see the wm6.5.3 build its just so awesome!

posted through my WM6.5 build
Roberto 1234 said:
i have an 4gb micro sd but not a converter... -.- thats why i always flash via usb, i think it is safer and more easy to use
i cant wait to see the wm6.5.3 build its just so awesome!
Click to expand...
Click to collapse
A micro SD adapter, huh. Dealextreme.com has it for dirt cheap (with free shipping), although I had problems with the adapter. I tried my 16GB Micro SD with a more reliable adapter, and both builds are able to read it. Really cool how my projects have come along.
I also updated posts 1 and 2 with more info and teaser screens. Enjoy and Monday-Tuesday is going to be a great day! (hopefully Monday)

awesome, they all look so cool great work! XD
i have one quetion, the other devices with wm6.5 what do they use for calling, maybe in the titanium build it wouyld be possible to use that app

sent from my custom Treo build
YEEEEAAAAHH! Final bug destroyed (could not configure SMS tone). Expect release in several hours.
Roberto 1234 said:
i have one quetion, the other devices with wm6.5 what do they use for calling, maybe in the titanium build it wouyld be possible to use that app
Click to expand...
Click to collapse
Hmm? I did not include Titanium in any build. It just wouldn't work (probably because I never looked into it an focused on the Red button more)
All calling related features of the Treo are handled by the Palm OEM applications, with the exception of SMS related features.
By the way, do you guys use MMS often? I just realized my ROMs do not have this capability (I never used MMS, too expensive). I could include an MMS program...

nah, i never use even sms, if needed i can download an mms app, so doint worry about it right now, most of us use this work phone for music and games (wich i think is stupid -.-) but anyway, i dont think we use it to much.
o and about the titanium maybe on another build, as the red button is working maybe the calling app that navs rom already has could be an alternative, but right now i cant wait for wm6.5.3 roms release!

An early christmas present for all
ROM's have been uploaded, posts 1, 2, and 3 have been updated. Enjoy, and if you can, donate, if not, hitting the Thanks button is fine I guess.
By the way, did you know that it's possible to have Manual Focus for the Treo's camera? Yes, it does actually work, and I'll show more later!
I forgot to add, do post here whatever problems you encounter. With as many WM programs as there are, I of course have no idea if they all work on my builds. I also do not have the Spectec Wifi card, so I don't even know if that will work on my builds. I am interested to know if it works.

geart work, thanks it looks so awesome, ill try them out!

Database Develop

welcome