Hi,
Anyone know where I can find a new motherboard and the ribbon that attaches the screen to the motherboard? Thanks.
kwongo said:
Hi,
Anyone know where I can find a new motherboard and the ribbon that attaches the screen to the motherboard? Thanks.
Click to expand...
Click to collapse
unless you find someone selling theirs for parts, finding a mobo/ribbon would be pretty much impossible.
You're better off buying a new x1.
Related
Hello Guys!
My MteoR/Breeze was falling from my table and now the case is broken. Have anyone an idea where I can purchase a new case?
Thanks for Help
with best reguards
cheapest one that I could find.
http://mobile.brando.com.hk/prod_detail.php?prod_id=03387
thank you for help. An other question, can I buy the Jogdial seperatly?
thank you again for help
well Google might help with that, all I know is that it is soldered onto the Motherboard and even if you can buy a new one, you will have to use a surface board soldering iron to install it.
Ok, thanks. I used google, but only for the jog-wheel, not for a motherboard.
Thank you again. can be close!
Shimpuu
i recieved a tilt i had purchased on ebay and it is pretty bad. i know it needs a flex cable after SEARCHING for it...however i cannot find the answer to this. i am looking into purchasing a full housing off ebay from forceviewer_uk however its unclear if i need the sliding mechanism to go with it as i just want to replace everything except the board and lcd. do i need the sliding mechanism, is it a good idea to replace it, or what. any help is very appreciated. thanks
Hi guys,
do any of you have spare HD2 motherboard? Or know how much would cost to replace LCD display connector socket? Sadly main is broken... :-( Please.
Hynek
07976 959 586
litlejohn said:
Hi guys,
do any of you have spare HD2 motherboard? Or know how much would cost to replace LCD display connector socket? Sadly main is broken... :-( Please.
Hynek
07976 959 586
Click to expand...
Click to collapse
First link on google.
http://cgi.ebay.co.uk/LCD-SCREEN-DISPLAY-DOCK-CONNECTOR-SOCKET-HTC-HD2-/330540512807
Hi and good morning,
did you replace the display connector socket? I also have to do this but I don't have an idea how to do. Do you have some hints for me. It would be great.
Thanks in advance.
I must do this as well!!!
A friend of mine told me that if the connector is not fully broken you could add some paper tape on the back side of the flex cable so it would make contact and fit tightly, that worked for him.
I am waiting for replacement LCD and would personally test this.
Replacing the socket on the MB is not imposible but requires soldering station.
HD2 Motherboard is not easy to get
Bro i am in Shenzhen China ,just want to tell you that it`s not easy to get the motherboard as it can not be tested , No one know if it work or not before sell
it`s better to has it fixed in the repair shop While LCD is easier to get
ordered a digitizer with bezel and all that stuff pre assembled from some phone seller in china (only one on the net selling the assembly). the chassis is different tho. I cant fit the black box that the signal wire attaches to in the new chassis.
anyone else run into this problem. do I need to post a pick to help you guys help me?
bump
montrese04 said:
ordered a digitizer with bezel and all that stuff pre assembled from some phone seller in china (only one on the net selling the assembly). the chassis is different tho. I cant fit the black box that the signal wire attaches to in the new chassis.
anyone else run into this problem. do I need to post a pick to help you guys help me?
Click to expand...
Click to collapse
Are you sure you didn't order parts for the Z1? The Z1 and the Z1s are different in size etc
Hi, does anybody know how to replace the digitizer only without a built in LCD?
aliexpress dot com/item/5-5-inch-Replacement-touch-screen-digitizer-panel-sensor-Glass-Lens-Assembly-For-Lenovo-Zuk-Z1/32529677183.html
alcio313 said:
Hi, does anybody know how to replace the digitizer only without a built in LCD?
aliexpress dot com/item/5-5-inch-Replacement-touch-screen-digitizer-panel-sensor-Glass-Lens-Assembly-For-Lenovo-Zuk-Z1/32529677183.html
Click to expand...
Click to collapse
that is not possible, it is one part LCD and digticer
I'd of thought as the phone is so cheap buy another and use the old one for spares. The screen is bonded and made by LG what it's doing in a phone at this price is a miracle. It will cost you £50+to buy and then unless you have done it before....