Hi guys,
do any of you have spare HD2 motherboard? Or know how much would cost to replace LCD display connector socket? Sadly main is broken... :-( Please.
Hynek
07976 959 586
litlejohn said:
Hi guys,
do any of you have spare HD2 motherboard? Or know how much would cost to replace LCD display connector socket? Sadly main is broken... :-( Please.
Hynek
07976 959 586
Click to expand...
Click to collapse
First link on google.
http://cgi.ebay.co.uk/LCD-SCREEN-DISPLAY-DOCK-CONNECTOR-SOCKET-HTC-HD2-/330540512807
Hi and good morning,
did you replace the display connector socket? I also have to do this but I don't have an idea how to do. Do you have some hints for me. It would be great.
Thanks in advance.
I must do this as well!!!
A friend of mine told me that if the connector is not fully broken you could add some paper tape on the back side of the flex cable so it would make contact and fit tightly, that worked for him.
I am waiting for replacement LCD and would personally test this.
Replacing the socket on the MB is not imposible but requires soldering station.
HD2 Motherboard is not easy to get
Bro i am in Shenzhen China ,just want to tell you that it`s not easy to get the motherboard as it can not be tested , No one know if it work or not before sell
it`s better to has it fixed in the repair shop While LCD is easier to get
Related
Hi,
Anyone know where I can find a new motherboard and the ribbon that attaches the screen to the motherboard? Thanks.
kwongo said:
Hi,
Anyone know where I can find a new motherboard and the ribbon that attaches the screen to the motherboard? Thanks.
Click to expand...
Click to collapse
unless you find someone selling theirs for parts, finding a mobo/ribbon would be pretty much impossible.
You're better off buying a new x1.
two months ago my hd2 has damaged from water and now i search for change the flex ribbon of keyboard... anyone can help me?
i search everywhere whitout result...
I am looking for the same thing!
The best bet is to look for a phone that is broken and use the part.
Please see my thread!
http://forum.xda-developers.com/showthread.php?p=5850567
Hi
I got a keypad PCB on eBay... But it was very expensive
Found it http://cgi.ebay.com/Flex-Cable-Keyboard-PCB-HTC-HD2-T8585-HD-II-2-Leo-/320562469094
i recieved a tilt i had purchased on ebay and it is pretty bad. i know it needs a flex cable after SEARCHING for it...however i cannot find the answer to this. i am looking into purchasing a full housing off ebay from forceviewer_uk however its unclear if i need the sliding mechanism to go with it as i just want to replace everything except the board and lcd. do i need the sliding mechanism, is it a good idea to replace it, or what. any help is very appreciated. thanks
I have a nexus 7 2012 tablets one with broken glass and another with bad LCD.
I want to sell different parts from it i.e.
Battery
Headphone adapter
Charging Port (USB)
Wall Charging Adapter
Internal Connecting Wire Strips (LCD strip, Power strip)
Speakers or any other part which can be taken off from motherboard.
Even the main board if you want it all form original tablet
All this is available in India.http://forum.xda-developers.com//www.pinterest.com/pin/create/extension/
Note all the parts from the tablet it self are for sale. Not market product. I am selling teared-down parts from original tablet itself.
jkdjdon said:
I have a nexus 7 2012 tablets one with broken glass and another with bad LCD.
I want to sell different parts from it i.e.
Battery
Headphone adapter
Charging Port (USB)
Wall Charging Adapter
Internal Connecting Wire Strips (LCD strip, Power strip)
Speakers or any other part which can be taken off from motherboard.
Even the main board if you want it all form original tablet
All this is available in India.
Click to expand...
Click to collapse
I am interested in battery n headphone .... This is my WhatsApp 9804658565 contact me
applesaw said:
I am interested in battery n headphone .... This is my WhatsApp 9804658565 contact me
Click to expand...
Click to collapse
Battery is sold!! and its headphone jack for sale not the headphone..reply if you are interested.
applesaw said:
I am interested in battery n headphone .... This is my WhatsApp 9804658565 contact me
Click to expand...
Click to collapse
yes i am intersts please contact me on wahtsapp 9804658565
original Wall charger available?
mother board up for sale?
Is this nexus 7 2012 1st gen tab? Is it wifi only ?
Message me on 9823714013
jkdjdon said:
I have a nexus 7 2012 tablets one with broken glass and another with bad LCD.
I want to sell different parts from it i.e.
Battery
Headphone adapter
Charging Port (USB)
Wall Charging Adapter
Internal Connecting Wire Strips (LCD strip, Power strip)
Speakers or any other part which can be taken off from motherboard.
Even the main board if you want it all form original tablet
All this is available in India.http://forum.xda-developers.com//www.pinterest.com/pin/create/extension/
Note all the parts from the tablet it self are for sale. Not market product. I am selling teared-down parts from original tablet itself.
Click to expand...
Click to collapse
interested in your offer
may i get the speakers?
need speaker and front frame. If interested pls whatsapp me 9747073137
i want charging flex cable with headphone jack.
Hi i need the digitzer.. my lcd is fine
is this 1st gen 32gb nexus 7....?
I am interested in motherboard
please contact if interested on whats app 9495207346
Need the vplume and power button (not the flex cable)
Please help me out contact on +918553311146,i lost my power and volume button while replacing the screen
hello.. need the charger
2012katas said:
Hi i need the digitzer.. my lcd is fine
Click to expand...
Click to collapse
How are u gonna get digitizer replaced? I am having one n7 2012 with cracked digitizer too. Might as well get it repaired (from the place u know) or sell it off its parts as i dont wish to spend much on it.
Hey guys, i have been searching on ebay and on google, for a replacement charging port, but i can seem to find the correct one. Some show the charging port only and others whats seems to be the daugtherboard that holds the charging port. Has any of you order from here before? http://www.bluphoneparts.com/blu-vivo-xl-sub-pcba-with-charging-port/, they have the pcb with the charging port on it, but no image. any help will be greatly appreciated thank you.
I purchased the exact part that you linked and this fixed the charging port issue on my Vivo XL. Will need a bit of soldering skill to remove the speaker from the old board and solder onto the replacement board -- the solder pads are small, but not difficult if you have some experience. Two ribbon connectors need to be pulled up (2x small connectors, not the large metal -- that is a cover) and the board itself is attached to the frame by some adhesive.
Now the phone works great again -- well worth the $27 (w/shipping) to fix this common charging port issue.
advice
Hi did you get though with changing the port, my port needs changing but that part is no longer available, there is another site that is selling just the charge port. I have no idea how to change the port. I'm planning on asking someone with a soldering iron for help, is it difficult. Also with shipping to Trinidad the part is 22 us, there's a nexus 5x port on eBay for about 5 us , is there any chance that it will work.
Thanks
prettygirlleanna said:
Hi did you get though with changing the port, my port needs changing but that part is no longer available, there is another site that is selling just the charge port. I have no idea how to change the port. I'm planning on asking someone with a soldering iron for help, is it difficult. Also with shipping to Trinidad the part is 22 us, there's a nexus 5x port on eBay for about 5 us , is there any chance that it will work.
Thanks
Click to expand...
Click to collapse
I think I saw "just" the charging port when I was searching... looks pretty difficult to just change the port..
I got the little board that includes the charging port for about $27 US...
I just changed it and it was not very difficult.
You have to unsolder the old speaker wires and swap it to the new board... pretty easy...
Just don't let your soldering iron get very hot... test with a piece of very thin soldering wire to where it just melts.
Unplug your soldering iron to regulate heat..
You don't need to add any solder to reinstall.. there is some little dabs of solder on the board that should be enough.
Was for me.
Here's a video link...
https://youtu.be/NH_17vH4BfA
HI! Is there a way for me to get a sub pcba with charging port board? The website bluphoneparts has not been working for a long time. And I have searched on amazon and ebay with no luck.