myTouch Skin It Offer - myTouch 3G, Magic Accessories

Has anyone here ordered or used they're skin it offer when you guys received your myTouch?
or has anyone used skin it before and what did you guys think of it?

i have one on my g1, and just ordered a custom one for my MyTouch 3G.... I like them. they are very durable, easy to put on, and fit under the snap on clear cases i use. the stretch to go around bent corners and such, to stay smooth with no bubbles or wrinkles.

crxtasi said:
Has anyone here ordered or used they're skin it offer when you guys received your myTouch?
or has anyone used skin it before and what did you guys think of it?
Click to expand...
Click to collapse
Personally, I wouldn't order a skin (hate the way the peel up), but I would order one of the custom shells. Know a girl that just got one a couple days ago and it's damn near melted on. . . it's not going anywhere. lol

I have a gel skin (case) from T-Mobile on my HTC Magic and it's alright. It doesn't fit as snug as I would like and it's a dust/lint magnet. Perhaps, that is the case with all gel skins though. Finally, the hole at the bottom covers up the microphone hole on the phone but ppl still hear me ok, so it doesn't seem to be a problem.
Overall, it does the job of protecting the phone.

It's not realy a skin. they actually print the image on a battery cover. Overall it's not bad. The image you use will have a lot to do with the quality of the printing. If you use the 25% off code it comes to about 17 bucks and change with shiping. For the price I am happy with mine. I am going to order another as soon as payday rolls around.

I ordered one but it was a custom image. It looked great online but terrible when I got it. They were extremely fast in replacing it but the second one looked really bad as well. The image quality was good but it doesn't really cover most of the phone so you have all these white spots where there is no coverage.
So they gave me a shell. This was much better but the image quality isn't that good.
All and all they were extremely nice and fast.

So the shell is actually another back plate printed with your design? I hope I read that right, because I have a crack in my back plate near where the camera is and it makes me nuts, I ordered my shell last week, now im just waiting....

Related

Crystal Case...thoughts...

Im looking at either getting the nice leather case, the official HTC one "Diamond Pouch PO S390" (seen in this thread here... http://forum.xda-developers.com/showthread.php?t=403691) or this http://cgi.ebay.co.uk/HTC-Touch-Dia...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
Anyone got a crystal case for their Touch Diamond? If so whats it like?
Im looking to protect my Diamond as I know how easy to scratch and mark they are (its doing ok at the moment but id like to keep it protected and looking like new)
Thanks, any feedback would be appreciated
I got one yesterday ( for $15 CDN ==" since i didn't want to wait for shipping)
from what i've seen so far
Seems like a great case, it is a tight fit for the diamond, so there are some worries with regards to upgrading the battery in the future....
But aside from that, it does its job of protecting my diamond and the change in dimensiosn is barely noticeable to me.
Moderators Could you move this to Diamond Accessories please, sorry, thought I had posted it in there, but hadnt.
Thanks for the feedback, sounds positive, I want to get a leather case, but at the same time its nice if i can just use it rather than get it out of the leather case to use it.
Mmm, food for thought!
yse mods please move the thread ^^"
i was contemplating the leather case as well before...
the benefit to the hard case is that its as it doesn't make it more difficult to access the phone and you dont need to take it out of the case to do anything
the only pet peeve i have with my case is that the power button on the top left is now a bit harder to press due to the case
just my 2 cents
Most of the crystal cases i have come across are dust magnets...so that puts me off them. Ive ordered the pouch today from Expansys...the official one although i have to wait 3 days before they come into stock..
Had one of these plastic cases on a samsung phone - the case cracked after a few days Lets hope these are different
One reason why im staying off silicon/crystal cases is so that I could enjoy the flushed screen.
Strange.. U guys don't seem to find it a luxury to have a flushed screen. I love it as I don't need to finger-wrestle in order to tap the 'X' button...
MasK, thats a very good point! I know what you mean there, very frustrating.
Mmm, think im just gonna opt for the Leather Case. Think I would just get frustrated with the Crystal Case.
Thanks for your feedback and comments guys.
Slightly off topic...
But do you think somebody (HTC or after-market company) will produce a soft touch / matt finish rear cover for the Diamond? I mean, its an easily replaceable, small piece of plastic and would protect (or hide) fingerprints and make it less scratchy if its soft?
Just a though... if any external companies looking it at, I'll pay £2.99 for a rip off soft touch back cover on eBay from Hong Kong
DG

HTCPedia Extended Battery Case

Just giving a heads up in case anybody has seen these and thought about buying one.
HTCPedia.com is selling an "Extended Battery Fit Hard Rubber Case for HTC Droid Incredible." I'm new, so I can't post the link.
I purchased one of these since I currently have one of the extended batteries in my Dinc and haven't seen another case that works with it. I received it on Friday and was a little shocked. This is NOT a case designed to fit the Incredible with an Extended battery. It is a standard case manually cut to open the back up so the extended battery can fit through it. As if that wasn't bad enough, not only did it not fit...but the cut job was really crappy. Squared off corners instead of rounded, double cuts in some places that left slivers of the material sticking out, etc. If you are planning on getting one of these you are better off just buying the standard case and cutting it yourself. You'll save money and likely do a better job.
HTCPedia has not responded back to my emails yet either as to if this was a mistake or honestly what they are trying to sell. I'll let you know if they respond with anything.
Here's the link for the case.
The quality in the pictures looks pretty bad to me, would have been a pretty good indication of the quality you'd receive. It's also only made for the 2150 extended battery/back.
That case is the one verizon sells look at the red one it has the same design inside as the one from verizon!!!! Haha so they just cut out the back piece!!!
BigNate said:
That case is the one verizon sells look at the red one it has the same design inside as the one from verizon!!!! Haha so they just cut out the back piece!!!
Click to expand...
Click to collapse
Yup, just cut it out. I did get a call back from HTCPedia just a few minutes ago and they are giving me a full refund. So that at least makes me feel a little better about the whole deal.

[Q] Battery Cover - UPDATE

http://cgi.ebay.com/OEM-HTC-INCREDI...402698?pt=PDA_Accessories&hash=item51956e92ca
I'm not sure if i would be happy with this, but in my head it seems cool
Has anyone ordered any of these or know if they are quality products?
Well, curiosity got the best of me and I went ahead and ordered one.
Don't know by first hand but it looks pretty good, seems like a recolor of the stock door so it should probably fit the same without issue.
FINALLYYY came in the mail today....I am shocked at the quality, it's not quite as nice as the stock cover, but for a knockoff I was impressed with the fit and quality. SOrry for the bad pictures, that's the best I can do at work.
At only around $10, I was thinking about getting one. Does it fit okay and how long did it take to get to you from out of the country?
funnce said:
At only around $10, I was thinking about getting one. Does it fit okay and how long did it take to get to you from out of the country?
Click to expand...
Click to collapse
The fit is perfect, just like stock. I think it took around 8 weeks because the first one never got to me, but after they re-shipped It got here in less than 2 weeks. I like it more and more each day actually. It looks really nice.
I ordered the white one from them and I can complain Looks perfect and costs less then the one from HTC
i have a white one also. although the plastic isnt quite as thick as the original, everything fits nicely. for $10 .... no complaints.
Ordered the red one from eBay. Good initial quality. Silver HTC letters and good fit but no silver ring around the headphone plug. I've had it for about three months and its cracking throughout the case for no reason other than taking off my gelcase (which looks amazing over the red back. Its a see through black case that makes the red back look awesome). I wouldn't buy another one from them. I got a refund right after I ordered it anyway because the paint had a drip between the led lights for the camera. So for free its not bad at all but I just ordered the OEM white and also the red back for 12 each.
Sent from my ADR6300 using XDA App

Received my Moko 360 Case (Pics Included)

Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Nice review! The case looks better than I had imagined.
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.
Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.
taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol
LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL
Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.
Nice right up. Off subject what ROM are you running?
superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question
Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.
Thought about this case as well, but went with the official travel case.
Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2
I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.

Has anyone got any of these generic dot view cases?

Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.
Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.
bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!
GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.
It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency
OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.
theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.
SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse

Categories

Resources