Hi
I installed Advanced_Configuration_Tool_v3.3.cab in touch viva (1.35.720.2 WWE) but it does not work.
I have installed dot net CF 3.5 but still no success.
I then tried AdvancedConfig_v2.0.2.0 it worked OK.
My issues is, any application that uses dot net CF 3.5 does not work.
In my installed program list, it shows dot net CF 3.5.
please help.
NS
try reinstalling a new CF3.5.
I did hard reset and then installed the CF 3.5 again.
I am using Vista and windows mobile device centre 6.1.
Still no luck.
Hi, which is the error that you are seeing? I have seen a parse error when connecting through wi-fi, but I tried using GPRS last week and worked....
Hi , I m using Advanced Config tool version 3.2.0.0
with .NET CF 3.5.7283.0. Initially i have make several attempts to install .NET CF 3.5. than after making a hard reset i made it. May be u can try another hard re set and than try to install it....
Related
ok so i installed diamond tf3d config on my sprint htc touch pro but when i try to start it it says " Error, NullReferenceException" the one of my friends said that i should try installing Microsoft Net CF but that didn't do anything either. Please help me find out wats wrong!!!!
To bad my Cristal Ball is still away for calibration...
What rom are you using? (my guess: default)
What .Net CF did you Install?
Did you do a soft reset after the .Net CF install?
Did you try a uninstall / fresh install of the Diamond TF3D config?
Did you Search?
nevermind
nevermind i got it to work by deleting the tweaks.xml file thx though
Colleagues,
I have tried running TickerTape on my Fuze with a stock ROM. It installs fine but when I run it, it says that it needs a newer version of .NET. However, I have .NET 3.5 installed.
Have you been able to run it successfully in the same configuration I have?
Thanks in advance.
I have TickerTape-0.5.1.cab installed to my SD card, on stok rom, and it works fine. I did nothing special to make it work. Maybe uninstall, reset, reinstall TickerTape-0.5.1.cab? Or maybe do the same to the "MS .NET CF v3.5..cab". Just a shot in the dark.
OlSarge said:
I have TickerTape-0.5.1.cab installed to my SD card, on stok rom, and it works fine. I did nothing special to make it work. Maybe uninstall, reset, reinstall TickerTape-0.5.1.cab? Or maybe do the same to the "MS .NET CF v3.5..cab". Just a shot in the dark.
Click to expand...
Click to collapse
OlSarge,
Thanks for your assistance.
I uninstalled TickerTape and .NET 3.5 but when I tried to reinstall .NET back it gives me a message saying "the .NET Compact Framework version you are attempting to install already exists in ROM".
I am at a loss.
jdomi99 said:
OlSarge,
Thanks for your assistance.
I uninstalled TickerTape and .NET 3.5 but when I tried to reinstall .NET back it gives me a message saying "the .NET Compact Framework version you are attempting to install already exists in ROM".
I am at a loss.
Click to expand...
Click to collapse
You need to flash a cooked ROM. The stock ROM blows. Take a look at this one:forum.xda-developers.com/showthread.php?t=467592
Installing a different ROM will void the warranty.
jdomi99 said:
Installing a different ROM will void the warranty.
Click to expand...
Click to collapse
Rules can be bent without being broken...
Install netCF 2.0! Yes 2.0 because 3.5 does NOT include all features of 2.0
Solved almost all my netCF problems with cooked 3.5.
tyguy said:
Install netCF 2.0! Yes 2.0 because 3.5 does NOT include all features of 2.0
Solved almost all my netCF problems with cooked 3.5.
Click to expand...
Click to collapse
tyguy,
The problem is that most programs need 3.5.
Issue solved: here is why I could not reinstall .NET 3.5: When you first install 3.5 the instructions tell you that at the end you need to change the registry so that 2.0 is turned off (with a 0) and 3.5 is turned on (with a 1). If you uninstall 3.5 the registry is left untouched, meaning that 3.5 is still on; that's why the message that the version already exists. So, I had to go in, reverse the registry: turn off 3.5 and turn on 2.0; now I was able to reinstall 3.5 successfully.
After this, I was able to install and run TickerTape successfully.
netCF in general
@jdomi99
Though this worked for you there is still an issue.
If you look at the SDK and SPs for 2.0 to 3.5 you WILL see that 3.5 is NOT a super set of 2.0 (meaning including all 2.0 features plus 3.5 additions on top).
They can and will co-exist without negative performance issues so installing both doesn't a.) harm anything and b.) wont slow your device down. Though 2.0 is slower, applications will pull the required parts which may be 2.0 or 3.5.
That's at least how our dot net developers explained the issue.
BTW there is a little software tool to change the settings via an application instead of modding the reg. Unfortunately I do not have it anymore (would appreciate if one could post it).
Edit:
Found the little app in the Lumos thread (see attached) there you can assign general policy and even which app uses which .net version.
Install and you should find it as first listed program under Programs.
Hi
I got HTC touch VIVA few weeks back.
If I install Windows CE compact framework (NETCFv35.wce.armv4.cab) with no success .
It gave an message "Installation unsuccessful". Same issue with CF V 2.0 also.
I need to run some application which refers higher compact framework.
I used to do this in my old Imate phone with no issues.
Please help to resolve this.
I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?
I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps
sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot
Hey i got it!!!!!!!!!!!! THANKS A BUNCH
well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^
I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.
hey guys.
when i try to start the pre installed beejive with my raphael with win mobile 6.5 (EnergyROM 3.0 'Phoenix' (21812)) there is some wired message telling me to download the "netcfv35.messages.de.wm.cab" to get the full error. i have done this. still same ****. havent found anything on inet/xda developers. tried SEVARAL roms/win mobile versions. still no solution. i am wondering if i am the only one.....?!
what i am wondering about is: why does this app tell me to download the DE version(is the code for deutschland - germany). well i am german. but how does the raphael know? i havent installed a german tool. nothing!
maybe some solutions or suggestions!
ty in advance
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
have the same error with win mobile 6.1.
also it is pre installed on a 6.5 rom. why should the chef do this if it would not work?!
i tried the same patch few days ago. didnt worked for me. how have you done it?
beejive was pre installed. than i installed the 1. LennySh_SQLCEMobile_3.0.CAB after this the 2. BeeJive_Fix.CAB
still same error..
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
ocblazer949 said:
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
Click to expand...
Click to collapse
worked like a charm
adoute said:
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
Click to expand...
Click to collapse
I have just installed the latest version of windows 6.5 energy rom and can no longer get pockettwit to work get the NETCFv35.Messages.EN.wm.cab error. Installed the cab but still dont get the complete error msg. So is the problem because the rom has .NET 3.7 cooked and not .NET3.5? If so is the solution the same as you have above? and if so where i do i find .NET 3.5 an SQLServer...
and install them?
Love the new energy ROM so much quicker etc - though does eat the power
These are the cabs I used to install .NET 3.5 and SQLCE on the 2009/6/13 Energy ROM (standard). I simply installed .NET, then SQLCE, then soft reset. BeeJive (and TrackMe) worked fine after the soft reset. I did not do anything else - both the cabs installed fine.
The forum won't let me attach the .NET cab... The filename is "NETCFv35.wm.armv4i.cab". I'm sure that I found it somewhere here at XDA, so it shouldn't be too hard to find.
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
zotero said:
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
Click to expand...
Click to collapse
Strange. It has worked for me 3 times in the last 10 days (trying various software, not liking it, hard reset).
The only thing I can think of is that my sashimi autoconfig installs the SQLCE cab. After sashimi has finished, and I've done some manual tweaking, I soft reset, install .NET 3.5 & SQLCE, soft reset, then everything just works. It is possible that there is a soft reset between .NET and SQLCE - I'm not entirely sure, but its worth a try.
Thanks for linking the .NET cab. For what it's worth, the version I install is 2.58 MB (2,707,308 bytes). Is it possible that yours is different?
I hope you find a way to get it working.
this file got exactly 2,707,308 bytes, too.
well. now i am going to deinstall beejive SQLC an .NET. then install SQLC (softreset) .NET (softreset) beejive (softreset).......nope. still not working. damn it.
just realized that msn is working. maybe my icq contact list is too big? going to try an other account..
edit
icq with 5 contacts working fine. WTF!?
this post is really old. but now i found out whats the problem:
after A LOT of research i GUESSED that a problem might be some strange user names in my contact list. i am talking about characters like this ****: ÐØΓťšĹĦĨ (just examples..)
i changed their 1337 h4xx0r!!1111oneone names into something normal...
now its working
maybe this is going to help somebody.
Minature BeeJive
Is anybody elses BeeJive realllllly small when you enter the chat feature like so minature you can barely see the avatar or is it just mines? Thats the only thing i HATE about the Fuze does anybody have a fix or a tweak thanks
after installing google traslator i get massge i have to install first NETCFv35.win.armv4i.cab
yet wile installing the NETCFv35 i get error i need first to start google this is catch22 !!!
any help ????/
thanks
baki69
NETCFv35.Messages.EN.wm.cab
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
NETCFv35.wm.armv4i.cab and others...
im doing a forum search to try to find out what these netCFv..etc files are for but havent really figured it out. there are a few different ones out there, dont even know which I would need.
Ive also had programs tell me to install these net files before, but Im hesitant to start searching out and installing things I dont understand.
Im using stock rom (havent updated yet) for T Mobile USA HD2, with Cookies installed.
Any love for a noob?
zarp said:
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
Click to expand...
Click to collapse
i have the messages cab installed, well it tells me it is anyway
i get that same error BUT i can't locate the file you mention, where should it be ?