Hi,
I've done a clean install of win7 ultimate. I got all the drivers installed but can't get the wifi driver to run. Installed the vista driver: no luck.. got an upgrade from HTC: no luck..
I havent seen any other comments on this so am I the only 1?
Hope some1 can help me get this sorted..
cheers, Flummie
did you turn it on in the comm manager? have you tried to update the driver from device manager?
hi dr.5,
the driver cant be installed so im afraid there is no wifi to turn on or driver to update in dev. manager..
dr.5 said:
did you turn the wifi on? have you tried to update the driver from device manager?
Click to expand...
Click to collapse
then what happened when you run the ....\Marvell Wifi driver(8[1].114.123.139)\WifidrvpatchV1.1\setup.exe?
ps: the Marvell Wifi driver(8[1].114.123.139).zip was downloaded from HTC homepage, I installed the driver without any problem.
Solved
it just ran but after restart the driver was gone..
but.. I've solved it the hard way: went back to vista, installed the driver and the update and upgraded to 7.. now everything is fine..
so I would suggest: use the upgrade function and not the clean install option..
thx for the help
dr.5 said:
then what happened when you run the ....\Marvell Wifi driver(8[1].114.123.139)\WifidrvpatchV1.1\setup.exe?
ps: the Marvell Wifi driver(8[1].114.123.139).zip was downloaded from HTC homepage, I installed the driver without any problem.
Click to expand...
Click to collapse
Related
When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
kashmir83 said:
When I connect my Galaxy S to my PC it starts to install the drivers.
The driver consist of 3 parts, but the last one, the MTP USB device, fails to install. I tried restarting my pc after installing Kies and also tried alternate drivers for Windows 7 x64.
When I connect my phone in Kies mode I get an error saying:
FsUsbService64
Service Initiali Failed
(screenshot attached)
Anyone familiar with this problem and/or it's solution?
Click to expand...
Click to collapse
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Aylarth said:
Try this, its good for win7 32bit and 64bit also. (My girlfriend and I both have our own SGS, and her win7 32bit is working flawlessly with this driver just like my win764bit.)
Click to expand...
Click to collapse
Yeah I've tried this package. Same error.
RagnarIceblood said:
I have the same problem, however using Windows XP 32 bit SP3
And I get:
Click to expand...
Click to collapse
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
RagnarIceblood said:
Yeah I've tried this package. Same error.
Click to expand...
Click to collapse
dang... then this is something I cant help in, I'm really sorry
kashmir83 said:
Thanks a lot! I will try this later on when I'm able to connect to my pc.
If this doesn't work, could it have something to do with the firmware version?
Click to expand...
Click to collapse
All I know is that this usb driver package helped me and my gf either, without this pack I got the same error like you did, and since then everything works properly. If this package cant help you then I have to admit this is beyond my knowledge.
Just found our that i left my usb cable at work
Thanks again for your suggestion. I will try this after the weekend.
Aylarth said:
dang... then this is something I cant help in, I'm really sorry
Click to expand...
Click to collapse
Some more info.
The last one is from Event Viewer, where it claims that this version of Windows does not support Windows Portable Device drivers.
What a bunch of bollox, my HTC HD2 synced just fine. Must be Samsung crappy driver I guess.
And yeah, I got v 4.5 of windows installer.
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
RagnarIceblood said:
update: after lots of googling, I've solved the issue.
re-installed Windows Mediaplayer 11 !
Click to expand...
Click to collapse
huh?.. mediaplayer? wierd solution ..
I had this issue too, on my moms pc.
I installed kies befor plugging my phone to the pc, it worked perfectly then, installed the drivers and all. could not see if you had tried that. so its worth a shot
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
drhonk said:
huh?.. mediaplayer? wierd solution ..
Click to expand...
Click to collapse
Not really, WMP 10 is the one responsible for the stock MTP driver.
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Just a quick note on what I discovered last night when trying to get my SGS connected.
Bluetoothe needs to be off
It has to be using the stock Home screen I was as ever using LauncherPro. As soon as I switched back to stock it connected.
rocketpaul said:
My old computer worked fine with kies, but this new 64 bit one just wont insall the mtp driver, even if i try manually.
Click to expand...
Click to collapse
try what I did, re-install WMP 10 (or 11)
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
TeamSancheZz said:
I don't know if this is obvious or not... but if your running a downloaded Launcher such as Launcher Pro... make sure you revert back to the stock launcher when trying to connect to KIES. This has been my problem until I stumbled across it last week.
Click to expand...
Click to collapse
how do you do that btw?
reinstall wmp11
hey ive got the same problem..
but how do you reinstall windows media player 11 on vista?
AllGamer said:
another thing to keep in mind
open TASK Manager in Windows
and make sure ADB.EXE is not running
if ADB.exe is there just end task it
when ADB.exe is left in memory, it locks up the USB connection with the phone, and Kies goes into dumb mode
Click to expand...
Click to collapse
Unfortunately, this did not fix it on my droid X
Hi,
as the title suggests I have problem flashing HSPL. I've already done everything the original thread says when encountering USB problems e.g. other USB port or cable. I have also installed the "enablerapinew.cab" and used both manual and automatic mode of "Topaz-HardSPL_V5_09R6.exe". I have tried using "SSPL-Manual-TopazV5_09.exe" as well.
I already created a ticket adressing that problem a few days ago but haven't received any answer yet. (Ticket #458139)
The result ALWAYS is that as soon the phone shows the SSPL screen - no matter how it was brought to that state - the connection to the PC is lost. Windows Mobile Center then shows it as not connected. Before that it was always connected and synced perfectly fine. As a result I get "Error 260: CONNECTION".
I have Win 7 Pro 64x and no access to an XP PC.
Would be great if anyone could help since I have no idea what else I can try to make it work.
you need drvupdate-amd64 to be able to reconnect the device to the PC
Hakim Rahman said:
you need drvupdate-amd64 to be able to reconnect the device to the PC
Click to expand...
Click to collapse
When I try to install the file, it says I already have a newer version installed. Do I need to uninstall the version I have to be able to install this one or does that mean I have a different problem?
EDIT:
I downloaded the most recent version from Windows' Homepage and it worked!! Problem solved, thank you very much
guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
ankitxperia said:
guys i recently changed my hardware i am running on windows xp i have want to use the flash tool but when i connect my phone in flash mode the pc gets hanged up
i have been faced this problem before too but somehow managed to slove it i think its most probably driver problem any solution to solve this????????
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
B.Jay said:
Use Flashtool 0.2.9.1 or switch to a more recent version of Windows if you want to run Flashtool 0.6.x.x
Click to expand...
Click to collapse
thanks for the reply cause i think the problem causing is due to driver
previously in my old machine i used gordon driver at that time every thing worked fine
lol, wtf do you mean, changed driver? you got rid of the driver?
meh, never mind.
ankitxperia said:
thanks for the reply and what about drivers should i install drivers which came from flashtool ot the gordon driver
cause i think the problem causing is due to driver previously in my old machine i used gordon driver at that time every thing worked fine
Click to expand...
Click to collapse
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
B.Jay said:
Your call. Either install PCC to have the SEMC drivers installed or use the Gordon's Gate setup that comes with Flashtool.
Click to expand...
Click to collapse
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Thanks in advance
ankitxperia said:
still no luck using flash tooll version 0.53
Click to expand...
Click to collapse
Use Flashtool 0.2.9.1
Newer versions won't work with your crap of an severly outdated OS.
ankitxperia said:
still no luck using flash tooll version 0.53 installed gordon drivers from the flash tool folder rebooted the pc.
Thanks in advance
Click to expand...
Click to collapse
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
ankitxperia said:
i m running on xp professional sp2
when i put my phone in flash mode i get "semc new hardware found" then the pc gets completely hanged so i need to directly turnoff the pc so any solutions ???
Click to expand...
Click to collapse
1st: Your computer OS is a bit old, outdated........That is one of the reason's why it crashes
I suggest you get a new OS or update your OS
I.E
LinuxMint (what i use, but im still unable to use flashtool at all LOL)
OR
Move to a newer version of windows I.E: Windows vista or Windows 7
Hope it helps
-wilbso
wilbso said:
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
B.Jay said:
Most likely out of my "Flashtool" folder on MediaFire as I keep a collection of different versions there.
Click to expand...
Click to collapse
it makes sense now
wilbso said:
No!, Not flashtool 0.53, flashtool 2.9.1
Where the hell did you get 0.53 from anyway?
Click to expand...
Click to collapse
i got this version from here not from hell
http://androxyde.github.com/Flashtool/
i will check and report soon thanks
I recently got Windows 8 its awesome BUT, when I connect my phone it says USB device not recognized. I know this is from drivers but i have the latest. Yes I went and got it from HTC's website along with HTC Sync but i still get the error. I cant get to my sd card or anything because of this and it REALLY sucks! i looked else where for the drivers but nothing works. Any help any1 please and thnx?
as far as i know, windows 8 can use any driver from windows 7 or vista. maybe u need to install it manually from device manager.
btw i never use win8, so i think its the same process to install driver
Sent from my HTC Incredible S using Tapatalk 2
I went to the device manager and uninstalled the device and the next time i connected it it installed the drivers fine. I dont know what the hell i did the first time i plugged it in but i clearly didnt let it install. Anyway thanks for the help, it was probably just a stupid mistake
RoughRunner said:
I recently got Windows 8
Click to expand...
Click to collapse
Seems like you got bad luck I'd prefer an OS (operating system), not a CS (crash system)
SCNR
Check this post out, see if it helps you
http://forum.xda-developers.com/showpost.php?p=28835191&postcount=14
i use windows 8 and i haven't any problem with it BUT i can't use internet pass strogh (i use venom viper 1.0.0 and htc sync manager)
I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.
Amar-S said:
I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.
Click to expand...
Click to collapse
what rom u use?? and version of htc sync or htc sync manager??
Amar-S said:
I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.
Click to expand...
Click to collapse
Ya me too everything is fine
husky69 said:
Seems like you got bad luck I'd prefer an OS (operating system), not a CS (crash system)
SCNR
Click to expand...
Click to collapse
You dont know what your missing if your mind is set at that bro
MA52 said:
Check this post out, see if it helps you
http://forum.xda-developers.com/showpost.php?p=28835191&postcount=14
Click to expand...
Click to collapse
Thanks im fixed now
Ok here what happened:
-Internet pass through was working perfectly with stock rom
-Rooted and flashed Viper rom: it was working once over 3 (enable/disable CD HTC Sync)
-I then uninstalled and reinstalled HTC Sync manager 4 times but Internet pass through is not working at all.
-Uninstalled manually all hTC drivers and reinstalled via HTC drivers executable but also no connection.
-Uninstalled and reinstalled Pdanet but it didn't make a difference
-Disable/enable USB debugging didn't make a difference
So what's the problem? The Viper got corrupted or Windows 7 64 has known problems??
vegetaleb said:
Ok here what happened:
-Internet pass through was working perfectly with stock rom
-Rooted and flashed Viper rom: it was working once over 3 (enable/disable CD HTC Sync)
-I then uninstalled and reinstalled HTC Sync manager 4 times but Internet pass through is not working at all.
-Uninstalled manually all hTC drivers and reinstalled via HTC drivers executable but also no connection.
-Uninstalled and reinstalled Pdanet but it didn't make a difference
-Disable/enable USB debugging didn't make a difference
So what's the problem? The Viper got corrupted or Windows 7 64 has known problems??
Click to expand...
Click to collapse
OMG same problem here. and no one could solver ergh
It works on my home PC but not at work!
It's not rom related, it's weird that the office PC was giving internet pass through before but not now.
vegetaleb said:
It works on my home PC but not at work!
It's not rom related, it's weird that the office PC was giving internet pass through before but not now.
Click to expand...
Click to collapse
Mine doesn't work in home PC, I manage to get it work on ViperROM and stock ROM before I change my rig but it's still the same OS and Internet connection, what on earth is wrong?