Database Develop

HTC X7501 Housing

For those that were considering a new housing for their X7501 I found a website I recently placed an order with. For the past few weeks my searches were coming up with the housing for the X7500's but I lucked out tonight. If anyone's interested in purchasing a new housing the link is:
http://www.order-bulk.com/advanced_search_result.php?keywords=dopod+u1000&Search=Search
I'll give feedback after my order is received.

now i need to have $100... i want this. i will need this in the future, but i must get one right away.

jetherson said:
now i need to have $100... i want this. i will need this in the future, but i must get one right away.
Click to expand...
Click to collapse
LMAO, don't forget to order the disassembly tools. I'm still waiting for my order to come.

can someone post a link on how to dissasemble the htc advantage 7501, i am really bothered with my scratches, and I am considering to buy a new housing, but the question how to install it.
my scratch is on the chrome close to the screen, very annoying scratch, please anyone come up with a solution to remove scratches, or help us providing a how to guide to install new housings

hykhleif said:
can someone post a link on how to dissasemble the htc advantage 7501, i am really bothered with my scratches, and I am considering to buy a new housing, but the question how to install it.
my scratch is on the chrome close to the screen, very annoying scratch, please anyone come up with a solution to remove scratches, or help us providing a how to guide to install new housings
Click to expand...
Click to collapse
I know responderman had done the swap of the housing already. He might have some information along with pictures on it. If you don't get any replies or find anything let me know and I'll see what I can come up with. I too myself will need it anyway. My housing should be here any day now.

EDITED:
Use responderman link , post 9
Just to say it is tricky will be an understatement, so I would ask for advice from somebody that has done it, even with the manual, just to minimize damage.

Im here guys its not that hard when you know what to look out for. I will let you know more when you are ready.
Jay

I am receiving my housing today, please provide details and step by step guide, how you did it. I am awaiting your feedback your help is very much appreciated

Athena Manual
Hi Again,
The official Athena Manual HERE will tell you much better than I can from page 29 to 33, But if you have any questions then ask me on this thread so everyone can read it please.
Regards
Jay

well looks so complicated, now i will till the phone really becomes nasty looking, then i will try this

PBL1 said:
There you got
Just to say it is tricky will be an understatement, so I would ask for advice from somebody that has done it, even with the manual, just to minimize damage.
Click to expand...
Click to collapse
I'd love to look at the manual you attached, but when I try to unzip it, it asks for the next part of the archive... was this a spanned zip file?
The file link Responderman gave is coming up blank for me. Anyone got a better link to this repair manual? I dropped my x7501 and smashed the corner of the case - still works fine, but the case is slowly disintegrating....!!!

same here, cant download megaupload file, and part of zip missing :-S
thx

Zip file? Its a PDF file and the link is working fine. Ive just tested it on another computer. You should be able to download it and start it straight away????
Jay

responderman said:
Zip file? Its a PDF file and the link is working fine. Ive just tested it on another computer. You should be able to download it and start it straight away????
Jay
Click to expand...
Click to collapse
I am so frustrated. After ordering my housing, it finally came today (2 wks late), only to find out it's the X7500 housing. Not only that but getting out the car it fell on the face and got a slight scratch on the side. I will attempt to reach out to the supplier and see why they have false advertising on their site. I'll see how the return works out.

tootallk2000 said:
I am so frustrated. After ordering my housing, it finally came today (2 wks late), only to find out it's the X7500 housing. Not only that but getting out the car it fell on the face and got a slight scratch on the side. I will attempt to reach out to the supplier and see why they have false advertising on their site. I'll see how the return works out.
Click to expand...
Click to collapse
Sh*t thats bad news, sounds like they dont know what they are on about. I would complain to them. Are you happy with the work you need to do to change it?? it aint that bad honest, the worst bit is removing the plastic cover on the top.
Keep me posted
Jay

responderman said:
Sh*t thats bad news, sounds like they dont know what they are on about. I would complain to them. Are you happy with the work you need to do to change it?? it aint that bad honest, the worst bit is removing the plastic cover on the top.
Keep me posted
Jay
Click to expand...
Click to collapse
I sent them a complaint letter. I'm pretty confident I can do the swap out. I'll keep you posted on how it all goes.

tootallk2000 said:
I sent them a complaint letter. I'm pretty confident I can do the swap out. I'll keep you posted on how it all goes.
Click to expand...
Click to collapse
By the way, did you have any trouble with the athena manual download I posted? it seems some cant see it, but they are on about zip files
Jay

managed to get the megaupload pdf downloaded, must have been my ffox noscripts!
ok, so p29-33 seem ok, how does the bottom panel (with the battery cover) slide off?
also, what about the vueflo button, does that just get pushed in and then the internal unit slides out?
thanks for your help, i too ordered off order-bulk, the black case, what is difference to x7500 case?
also, navi rubber button, does the rubber bit in center pull out, then reveals a screw? or does the whole bit screw off?

HoggerJeff
I'd love to look at the manual you attached, but when I try to unzip it, it asks for the next part of the archive... was this a spanned zip file?
Click to expand...
Click to collapse
yea sorry I missed two files, since the total size is 9M and responderman posted a link for the same manual, I have deleted the original posted file and edited my previous post ( the limit is 8M for attached zip files)
responderman
by the way, did you have any trouble with the athena manual download I posted? it seems some cant see it, but they are on about zip files
Click to expand...
Click to collapse
now you know.
badaas
how does the bottom panel (with the battery cover) slide off?
Click to expand...
Click to collapse
you pull the navi rubber out, under it there is an screw, unscrew it and take the joystick, take out the power and comm manager/record bottoms
the top part is taken by starting from the corner ( next to the front camera) and continuing through to the other side (be careful with the volume bottom
pull the two plastic layers ( one in the corner other near the centre)
to take the plastic at the bottom, remove the screws and careful take the part
Now you should have a metal case opened at top and bottom, slide the internal parts towards the top
I didn't find it easy so read the manual until all is clear and good luck.

got mine today, no vueflo replacement button, and case bottom cover is warped! grrrr, peed off now, got an orange 'hole' where the vueflo was lol! (which apparently you can leave in place, same for 'ok' and 'menu' buttons on left, as theyre attached to the case, not the internal housing, which will slide out past them with no trouble! - hindsight eh!? marvellous thing!!!).
oh, and my rubber nipple cover pinged off somewhere into the obscurity of my carpet, great!!
edit: just a note, you don't have to take the battery bottom case part off first. you can do that once it's all slid out. much easier, as you can get to the little buggery clips without hassle!

Moving couch = Broken Tilt

I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks

well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.

brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya

pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?

This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.

I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.

Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.

brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !

pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$

brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help

Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.

congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"

brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it

I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.

When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...

DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.

I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together

kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????

Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF

here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot

[Need] How to change the faceplate of the Magic?

I am so interested to know if someone has guides or videos guidance to change faceplates on the Magic/MyTouch3G.
My girl friend has a black phone and I ordered her a new white housing for the phone from eBay. I received everything including tools but there was no any instructions. I gave a try from what I can see but it was not successful. I even searched on net but no luck yet.
Any comments will be really appreciated.

here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.

looktall said:
here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.
Click to expand...
Click to collapse
Thanks for information bro.
Actually, I need to give a try and figure out if I could just pull the faceplate along without totally pulling it apart. It will be so painful as I wont even realize if something goes wrong. Damn wish I had some videos on this.

The mytouch is easy to break down but it would have to be totaly taken apart to change out the plastic housing.

looktall said:
here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.
Click to expand...
Click to collapse
Oh that's awesome. I wasn't even LOOKING for this but it's awesome.

Just one problem with that manual, it's for a prototype version of the sapphire which has the hero style buttons on the bottom instead of the Magic ones. Now, I'm not sure if this is the only difference but just bear that in mind.

I have fully disassembled 3 MyTouch phones. Easiest smart phone to break down so far. Just don't drink any cafiene before hand. not diffucult in any way. just needs a steady hand. HOWEVER! If you have never done this kind of thing before you will likely screw something up. I have been tearing electronics down and repairing them for twenty years. The ribbon type cables can be torn VERY easily, one slip with a screw driver can tear into a board and destroy it beyond repair, too much stress removing a fragile screen can break it. The learning procces on this type of stuff is an expensive one. Go VERY slow and be VERY patient.

Very tempted to replace housing on mine, currently have grubby white Voda one and would like black/red HTC one on ebay. However, as poster said before I have little experience in doing this and nervous to do so. Not sure if I am brave enough!

Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4

Dr.Preston said:
Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4
Click to expand...
Click to collapse
I bought the same in white color says with Google in back cover, and it worked perfectly with my Rogers Magic. I think Magic, MyTouch3G all come under G2.

That might be a bad sign, as the rogers magic I believe is the 32a mainboard and the mytouch is the 32b mainboard. But then again, maybe the mainboard version has nothing to do with this. Is there someone out there who knows for sure that can confirm this?

Somebody should make a video of the housing replacement... i have changed some housings but never a touch screen phone... help would be appreciated...

Hell ya.. I was googling it for days 'n weeks. There was no luck so I went looking for phone repair shops. Finally found a chinese store and they did it for me for $20. That is my story.

Any luck with a video for this?

Dr.Preston said:
Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4
Click to expand...
Click to collapse
This is really late and all, but I don't think that housing would work with MyTouch3Gs because the spot where you speak is on the opposite side of the MT3G

Oh man...That looked very complicated
So, in order to change the housing, I need to fully torn apart my phone?
>.> I knew I shouldn't bought the 3 years warranty for $80

cashoplz said:
Oh man...That looked very complicated
So, in order to change the housing, I need to fully torn apart my phone?
>.> I knew I shouldn't bought the 3 years warranty for $80
Click to expand...
Click to collapse
Yeah you have to. I would recommend you to give to someone who does phone repairs.

Where did you have it changed? I looked all over pacific mall and no one would do it.

magicalthinking said:
Where did you have it changed? I looked all over pacific mall and no one would do it.
Click to expand...
Click to collapse
I had the same problem on every phone shop in Pacific Mall. But I finally found a one in the Pacific Mall. Probably they are the only people do housing changes for Magic You got to go the area that has phone parts and repair section.
Enter to the mall from the main entrace and turn right and walk all the way down and then turn left. You can find it somewhere in the middle on your left. Sorry I can not remember the name of the shop.
By the way I had my own housing. I do not know if they carry in stock of those.

Oh man, Ive done some research and found a few local phone repair shop who can replace my housing but they all charges over $50.00 = =..I'm going to do it on my own
Okay... I'm finished.
the overall process only should be taking about 30-45 mins.
just follow the guide from step 1-7, then you can jump to step 29 which is remove the LCM from the plate.
Then put the LCM along with rest of the motherboard (watch out there is 2 parts linked together) into your new plate.
Now, put everything back together.

Where can I find FULL Legend housing ?

Hi mates,
Because of 2 little dings and scratches on my phone, I'm looking for a new aluminium body spare part for my Legend but I can't find it anywhere...even in e-bay. What can I do?! Should I contact HTC support and send my phone to repair center?!?
Thanks

I would also like to know this...
probably the same location when the black legend comes out...

Same, I don't think we'll see any because it's an odd designed phone.

Found this:
http://cgi.ebay.com/ws/eBayISAPI.dl...ory=20336&_trkparms=algo=LVI&its=I&otn=1#shId

gregnapola said:
Found this:
http://cgi.ebay.com/ws/eBayISAPI.dl...ory=20336&_trkparms=algo=LVI&its=I&otn=1#shId
Click to expand...
Click to collapse
NICE !
Now we just have to wait for the black one...

Has anybody had any luck finding the black housing yet?

Somebody find something?

haven't found one, but I do have an phantom black legend at my disposal.
My thoughts about it:
It looks very "bad", very nice, when I put my silver legend next to it it seems a lot smaller (the black one).
However I do have my doubts about the housing.
It isn't black aluminium its rather silver aluminium with a matt black coating.
So I'm afraid that the scratches are going to be silver...
The screen is surrounded with a silver edge just as ours.
Very nice housing but time will tell about the scratches...

Closest thing I could find

http://www.youtube.com/watch?v=b_XsIljvNSY
There's a good video review of the Legend in all its black glory.
I can't understand a word the guy's saying, but it's good nonetheless

How funny is norweigian?

Not that funny as English.
Sent from my HTC Legend using XDA App

Look for htcrepairparts.com, be advised it's quite expensive though...

dagreedyfly said:
Look for htcrepairparts.com, be advised it's quite expensive though...
Click to expand...
Click to collapse
Many thanks!!!...I've just purchased a new Housing 4 my Legend... finally

gregnapola said:
Many thanks!!!...I've just purchased a new Housing 4 my Legend... finally
Click to expand...
Click to collapse
Great!
P.S. poi mi dirai com'è perchè potrebbe servirmene una...

dagreedyfly said:
Great!
P.S. poi mi dirai com'è perchè potrebbe servirmene una...
Click to expand...
Click to collapse
Ooooook

jennan88 said:
link
There's a good video review of the Legend in all its black glory.
I can't understand a word the guy's saying, but it's good nonetheless
Click to expand...
Click to collapse
black legend looks badass... wonder how i have never heard of it before

German Legend owners can also buy it here with free shipping:
http://cgi.ebay.de/Full-Housing-Kom...2627?pt=DE_PDA_Zubehör_KM&hash=item4aa7bb3083

dagreedyfly said:
Look for htcrepairparts.com, be advised it's quite expensive though...
Click to expand...
Click to collapse
OK, despite being a bit more expensive, which I didn't see for a bad thing, the spare part that came to me from htcrepaitparts is awfull...I wrote them and e-mail to correct this mistake and we will see how they react, but I was very much dissapointed when I unpacked it...It was not anodized, but simply coated aluminum, the upper cover hiding flash, camera etc was a complete fake - there are no antennas inside, just painted "pads"...
the only thing looking decent is the battery cover...

Dr.Romca said:
OK, despite being a bit more expensive, which I didn't see for a bad thing, the spare part that came to me from htcrepaitparts is awfull...I wrote them and e-mail to correct this mistake and we will see how they react, but I was very much dissapointed when I unpacked it...It was not anodized, but simply coated aluminum, the upper cover hiding flash, camera etc was a complete fake - there are no antennas inside, just painted "pads"...
the only thing looking decent is the battery cover...
Click to expand...
Click to collapse
So has anyone else find an authentic site that is able to sell the HTC Legend full housing yet? It'd be wicked if there was someone who would anodize these babies to a sexy red tinge. Hmmm

[Q] Housing Swap

Hey guys! So i completely understand how to completely disassemble this phone due to how easy it is (it only takes ten minutes!). But i was wondering do you guys think it would be worth being out of a phone for like a day (while paint drys, etc.) if i painted the whole thing and got rid of some scratches? Im seriously contemplating doing it but i just wanted your guys opinions and also any ideas on what colors i should use . Thanks!

that could be very bad for one no more warranty and two the paint could flake off and damage the hardware inside i would just skin it if u want to change the color that bad.

Thanks.
Thanks mate. My warranty is actually long gone and i will be getting a new phone shortly. The reason i assumed this would work because i saw a guy do it on the evo in the portal. It was actually a top post for the day. Id think about skinning it but for some reason the difficulty of the project is intriguing me. But i will def take what you said into consideration. Thanks

thats cool just please post pics if u do it im interested to see how that would turn out.

Okay
I'd be glad to post pics but it probobaly wont be untill this weekend because i use my phone too much during the week. I was thinking a white and metallic silver look. What do ya think?

i always liked the flat black look

The htc back housing will take dye better than paint. There was some pretty easy steps way back when. Check out ppcgeeks touch diamond forums, or google it.

il Duce said:
The htc back housing will take dye better than paint. There was some pretty easy steps way back when. Check out ppcgeeks touch diamond forums, or google it.
Click to expand...
Click to collapse
Hey thanks man.

Issue
Do you guys any idea how i could paint the hardware buttons to hide all the scratches mine had from when i "let" my sister "play with it. Do you thing if i just buffered it all out with a fine sandpaper or something and then paint around them that would work. Because i figured if i was going to make the whole phoen beautiful then i may as well fix this falw too. If you do not think that part is possible then i guess ill just buy new housing for like 5 bucks. But just lmk. Thanks

I like the chips and scratches on my phone -- it reminds me of Boba Fet's helmet.

rigmort said:
I like the chips and scratches on my phone -- it reminds me of Boba Fet's helmet.
Click to expand...
Click to collapse
+1
That is clever