Related
I got everything working the way I want on my new Tilt. I already created a thread about email not working and I have already been helped on that one (thanks again).
Since then, I decided to use a new rom (Schaps WM6Pro Kaiser 4.21 WWE Full). I am really liking it.
First thing I noticed is that AT&T's Media NET connection was no more, it showed up as CingularGPRS. Although all the settings were right and I think I have everything setup right (data works great, SMS/MMS, incoming/outgoing email, incoming/outgoing phone calls).
But the voicemail isn't working. Phone rings about 12 times, and instead of going to vmail, the caller gets a "The cellular customer you are trying to reach is unavailable, please try your call again" message.
If I press ignore on the phone, the caller gets a busy tone.
I tried searching (really, I did) and didn't find anything.
Any ideas on how to set up voicemail?
Thanks in advance for any help.
My VM got messed up after AT&T renewed my contract and updated my account. Call customer support, I called them last night.
Voicemail is a carrier issue unless you have the wrong number set to dial your voicemail??
Farsquidge said:
Voicemail is a carrier issue unless you have the wrong number set to dial your voicemail??
Click to expand...
Click to collapse
I would have no idea what number its supposed to dial.
But thanks for the help, I will give AT&T support a call and have them fix it.
BTW, is this something I did by messing with the phone, or was it probably not set up from the get go? i picked up the phone a few days ago and never received a voicemail and only found out today because a friend called and got that weird message so he texted me instead. Just dont want them accusing me of any
I have the same problem when ignore (red button) a incomming call.
It works good when I don't pick up, then it goes to voicemail after 30 seconds, but when I push the red button it give a busy tone...
Does someone know a sollution for this?
I have the right number in the voicemailbox settings...
I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
I know there are some recent roms being created that has the call blocking feature built in. i'm using one those roms, which is indicated in my signature. when u mentioned that you've tried them (call blocking applications) all, were they free and/or commercial apps, or apps created in the development/hacking section? Collectively speaking, there's alot of those types of applications floating out there, but maybe you've already tried those.
pheroah said:
I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
Click to expand...
Click to collapse
1st off, change your number
if that doesn't suite your needs make a fake dial tone which states your number is not in service as your voicemail while using call firewall. after a few weeks the person will give up calling you. Callers will receive one full ring and it will go to your new fake voicemail after blocking them, which they will perceive as your phone being turned off or changed your number.
common sense now pay me.
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
As I said before, the only device I saw that feature on, was the really old alcatel models; which didn't give you a ring, didn't give you a busy tone, probably just ignored the request coming in from the telco when it is one of the black listed numbers.
Nice try, but I would pay you, if you could do the same on windows mobile. By the way I was testing an alpha versio of the cruise before it was launched, and it actually (accidently) opened the speaker, before you actually picked up the phone call, so the other side could hear you, before you even answer.
Thus, I am sure these things are possible, if there is someone who has the knowledge, and power to play with the operator
I haven't tried anything comercial, didn't find what i was looking for. If you know of any comercial software or freeware that does what i am stating. i.e. doesn't ring before it blocks the call. That would be great
I have something called MAGICALL, and it works great. You can set it to pick up then hang up, however the best part is that the call doesnt "come through" or let the phone ring. Unless you specify the software to give you a pop up message indicating it blocked a call. I love it since it doesnt even let the phone ring, its like if you never got called.
Same thing, I already tried MagiCall and it rings once to the caller, and then disconnects. Very obvious that you are avoiding the person.
I currently use a free voicemail feature called YouMail, which has call filtering and call blocking features. You can block calls (I believe) and also create a unique voicemail greetings for those you want/trying to avoid as well. www.youmail.com
I also use magicall for this. As an action I choose 'ignore' and then the caller just hears the phoen ringing, the connection is not broken. And you, well you hear and see nothing so you are not disturbed. Is that not what you want/?
Not exactly, ignore is a nice feature if you dont' want to be disturbed, but if someone is constantly bugging you; you would like them not to even reach your phone (so they don't come next day in the office, and say I left you three missed calls, and you didn't answer me).
It would be easier if they just got a this phone is out of coverage (or something similar) from the operator; then you can always blame the operator, that they couldn't reach you ... you get my drift ?
Yeah, I get your drift. But, if you're not reachable, then I guess it's the provider that sends back a message to the caller. I don't think your phone can send that message to the caller.
Moreover in most cases if you're not reachable then the caller also gets sent to your voicemail and he can also leave a message and come to you next day asking why you didn't react to his voice messages.
So the only option would be to send a message back saying that the number doesn't exist. But again, you would have to be able to spoof a provider based message for that.
I see these options when a caller really wants to get hold of you and you don't want to react:
* drop the call after 1 ring: caller notices he gets dropped, gets pissed an comes to see you
* send message back saying you're out of coverage: caller leaves message, which you ignore, caller gets pissed and comes to see you
* send a message back saying that the number doesn't exist: caller inquires whether you changed number, finds out you didn't, gets pissed and comes to see you
* silently ignore him: caller leaves a message, which you ignore, caller gets pissed and comes to see you.
Seems you're screwed either way
Why not simply answer the call and tell the caller to f*ck off. He's bound to get pissed also but at least he'll leave you alone and you'll feel relieved.
Well for one, I don't use voice mail ... secondly, because it is the provider that sends the message, it is authentic....
So if your mobile ... somehow ... ignores the call coming from the provider ... the provider sends a message saying that the mobile is out of coverage ...
pheroah said:
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
Click to expand...
Click to collapse
Hmm, you're asking for someone to develop a piece of software because you have no spine? I know of no Java/.Net/etc API that is better than the truth. Tell the person to leave you be. The currently available call firewalls work great for when you need to be in a "Call Free Environment."
It has nothing to do with my spine; and I currently have NO ONE harasing me; but I believe that the current Call firewalls have a disadvantage, and lack a feature.
I wish there was someone in XDA-Developers who is willing to spend some time to make some adjustments to one of the ROMs to have this built in. Especially as this feature is available in historic phones that have a lot less features than a WM.
Im also using Magicall for this & its working great, the other party doen't even hear a ring. It has many other features too.
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Anybody have this issue?
Can somebody confirm that the reject calls text message generate function works on the Diamond......Mine does not and I'm wondering is there a Registry switch. Thanks.
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
rhedgehog said:
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
Click to expand...
Click to collapse
How do you turn diverts off??...cant seem to find anywhere in the phone that gives you that option ie options like when busy divert calls, when out of range divert calls etc etc
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
rhedgehog said:
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
Click to expand...
Click to collapse
Thanks for that...would have never guessed it would be in there lol
Btw your right, i tried to disable the voicemail feature...and it didnt work...if i press the ignore button it diverts to the voicemail...hmmm strange...
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
rhedgehog said:
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
Click to expand...
Click to collapse
Its strange because on my nokia n95 8gb phone i could easily turn my voicemail on and off whenever i chose.
I did notice after i had unticked the voicemail boxes...pressed ok then exited...went back into the phone settings and saw that the boxes were ticked....as i said its strange. Because sometimes i just want the caller to hear a busy tone or the reject tone...
Hopefully someone can try with a different sim and see what happens.
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
rhedgehog said:
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
Click to expand...
Click to collapse
Could be.,..i dont know as the Diamond is my first WM device that ive been impressed with enough to keep it.
Might give tmobile a call later and see what they have to say about it. Although i dont think im going to have much luck as when i rung them uip about mms settings they said they dont support Diamond..so couldnt help me out there.
that sounds about right for T-mo customer services.
If you can get past the usual shower of muppets on first level and get through to the guys in advanced connectivity in Doxford or Greenock, they should either be able to help or refer you to someone who can....
If i have to call them now, i refuse to speak to the lower levels and ask straight for advanced connectivity. Last time i got through (back in the days when i had my magician), was cos they'd changed their MMS settings. Finally got through to AC and they had me sorted in under 2 minutes! it's just the call filterers on levels 1 and sometimes 2 that cause the problems usually.
pilib said:
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Click to expand...
Click to collapse
I have flashed the German 1.93 update to my Touch Diamond without problems and the phone is working well -- however, I don´t have the "advanced" tab in the phone option!! (and before anyone asks, no I also don´t have the German "Erweitert" Tab there).
Anyone know what´s going on here?
I´d like to turn off the short vibration the phone makes when a call is established.
Thanks // Tom
The caller on the other end says it rings all the way through (5 rings and then to voicemail).
It has done this with several ROM's, the stock HTC cupcake, to JF 1.5, JACHero, and now I am on cyanogen's 3.62 ROM. The radio is 62.50S.20.17H_2.22.19.26I.
The phone will do this even with a clean wipe. No apps.
Any help would be greatly appreciated.
Thanks in advance.
-RotorDemon- said:
The caller on the other end says it rings all the way through (5 rings and then to voicemail).
It has done this with several ROM's, the stock HTC cupcake, to JF 1.5, JACHero, and now I am on cyanogen's 3.62 ROM. The radio is 62.50S.20.17H_2.22.19.26I.
The phone will do this even with a clean wipe. No apps.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Check your call forwarding settings. Sometimes, they like to play with themselves and set it as "forward all calls to voicemail". These settings won't show it, because the changes are on the T-Mobile server, not your phone. Only having 2 rings sounds like it connects to the network and then gets pushed away from it, so most likely it's not a problem with your phone.
If you happen to have an old T-Mobile phone laying around, trying switching SIM cards and see if anything changes.
Figured it out. Ran a GSM code
*61*1[vm access number]*11*n#
n= seconds before forwarding. Set it to 25 and it rings all the way through.
Thanks for the info lukekirstein
Double post.
-RotorDemon- said:
Figured it out. Ran a GSM code
*61*1[vm access number]*11*n#
n= seconds before forwarding. Set it to 25 and it rings all the way through.
Thanks for the info lukekirstein
Click to expand...
Click to collapse
Where would you run this code at? I want to be able to set my ring time longer so that it takes longer for it to forward to voicemail.
lukekirstein said:
Where would you run this code at? I want to be able to set my ring time longer so that it takes longer for it to forward to voicemail.
Click to expand...
Click to collapse
Open up your dialer and dial it like you would a phone number.
In my case I entered *61*18056377243*11*25# and dial. Runs the code and then in a few seconds it is done. But check to see if your voicemail number is different than mine.
-RotorDemon- said:
Open up your dialer and dial it like you would a phone number.
In my case I entered *61*18056377243*11*25# and dial. Runs the code and then in a few seconds it is done. But check to see if your voicemail number is different than mine.
Click to expand...
Click to collapse
Cool, was able to set the Voicemail to connect in 35 seconds. Thanks!
I get the error:
Call forwarding.
Connection problem or invalid MMI code.
I've carefully entered the code three times, always get the same reply.
I checked my voicemail number, and it's correct.
Any ideas?
blueheeler said:
I get the error:
Call forwarding.
Connection problem or invalid MMI code.
I've carefully entered the code three times, always get the same reply.
I checked my voicemail number, and it's correct.
Any ideas?
Click to expand...
Click to collapse
What are you trying to do?
Trying to get my phone to wait 20-30 seconds before going to voicemail.
I get, maybe, 2 rings before people are transferred. If my finger isn't already on the button, chances are I can't answer the phone.
These are the codes I tried (as per the instructions above):
*61*18056377243*11*20# (for 20 secs) -and-
*61*18056377243*11*25# (not to go to voicemail)
18056377243 is my voicemail number.
Neither worked.
blueheeler said:
Trying to get my phone to wait 20-30 seconds before going to voicemail.
I get, maybe, 2 rings before people are transferred. If my finger isn't already on the button, chances are I can't answer the phone.
These are the codes I tried (as per the instructions above):
*61*18056377243*11*20# (for 20 secs) -and-
*61*18056377243*11*25# (not to go to voicemail)
18056377243 is my voicemail number.
Neither worked.
Click to expand...
Click to collapse
Are you on a flex pay account? Also, you should only need one 1 MMS number, because that's the immediate point it re-routes to voicemail.
re Flexpay, to be honest, I'm not 100% sure. The wife set all of this up before we were married and we've just continued it. I seem to recall a mention of something like that, but I could very well be wrong.
I'm assuming that this option wouldn't be available to FP customers. Would 611 be able to make a change to fix it? The 2 ring thing is seriously causing problems on this end.
TIA
blueheeler said:
re Flexpay, to be honest, I'm not 100% sure. The wife set all of this up before we were married and we've just continued it. I seem to recall a mention of something like that, but I could very well be wrong.
I'm assuming that this option wouldn't be available to FP customers. Would 611 be able to make a change to fix it? The 2 ring thing is seriously causing problems on this end.
TIA
Click to expand...
Click to collapse
Call forwarding is not available to flex pay customers and thus, custom MMS coding will not work. If this is the case, you should contact T-Mobile (either way, probably a good idea) and talk to them to see what might be causing the problem.
What ROM are you using? Some of the slower ROMS can create dialer lag.
Asked my wife. It is Flexpay. So that solves that.
Thank you so much for your reply.
That got us going in the right connection.
I am using Cyan's rom right now. But this was the way it was ever since we got into any 'Cupcake" versions (OTA or modded). My thoughts are the radio or a tower issue, but that's an uneducated guess. I rarely get phone calls anytime except when I'm home, so it's hard to pinpoint. So I followed your suggestion and tried to call 611 a short while ago. Got through to CS who walked me through some stuff (their basic scripted thing, all of which I've already tried), and it didn't work. So they tried to send me to tech support, and I guess it was either to late or they couldn't connect for whatever reason, so I have to call back in the morning.
Thanks again for heading me in the right direction.
blueheeler said:
Asked my wife. It is Flexpay. So that solves that.
Thank you so much for your reply.
That got us going in the right connection.
I am using Cyan's rom right now. But this was the way it was ever since we got into any 'Cupcake" versions (OTA or modded). My thoughts are the radio or a tower issue, but that's an uneducated guess. I rarely get phone calls anytime except when I'm home, so it's hard to pinpoint. So I followed your suggestion and tried to call 611 a short while ago. Got through to CS who walked me through some stuff (their basic scripted thing, all of which I've already tried), and it didn't work. So they tried to send me to tech support, and I guess it was either to late or they couldn't connect for whatever reason, so I have to call back in the morning.
Thanks again for heading me in the right direction.
Click to expand...
Click to collapse
No problem, glad I could help you out :]. Let me know how that goes!
Any one having trouble getting there Google voice to work on the captivate
Sent from my SAMSUNG-SGH-I897 using XDA App
No problems here, working great.
Mine works great, although it took me FOREVER to get it to work correctly and set up.
Also I notice the speaker volume when trying to play messages through speaker phone is horribly low.
Yeah I had problems at first. I got a phone number with my name in it, but it didn't have a location and no one could call me. I had to pay 10$ to switch my number to a local one but its all good now.
Also, doesn't make calls on my wifi b/c internet keeps dropping, but I don't blame it. My wifi sucks.
You have to go on the google voice website and activate it
Sent from my SAMSUNG-SGH-I897 using XDA App
smeltn said:
Mine works great, although it took me FOREVER to get it to work correctly and set up.
Also I notice the speaker volume when trying to play messages through speaker phone is horribly low.
Click to expand...
Click to collapse
Same here, the message volume is so low you really cant hear it. Other than that everything works for me.
Wrong person when hit voice mail...
I've posted this question in Google's Help area, but I almost never get replies on messages there. Trying here.
When someone forwards to voicemail (Google VM), the recorded name that plays is not mine. I have recorded my name again; played it back on the WEB, and it is me; but if I dial my phone and go to VM it is a different person that says the recorded name. To answer the first obvious question, I am sure we are using the right number
I did see in the Google help section that someone fixed that problem by disabling Google Voice on their phone and re-enabling it.
Interestingly, I do have the Voice Mail Carrier in my phone set to 'My Carrier', which would be AT&T. I"m not sure of the significance of changing that. My presumption is that if it rings long enough it may go to AT&T voice mail instead of Google Voice mail. But in the end, I don't believe that has anything to do with my problem.
But even though I don't think this is part of my problem, I did try to set in my phone to send voice mail to Google Voice. When it went to the network it comes back with message "Voicemail number change unsuccessful. Please contact yoru carrier if this problem persists."
I guess if I can come up wiht correct settings that will be helpful. Everything I find in the Google help for setup is about setting it up on the web, and not the phone.
Later I found that you can enable/disable Google Voice Mail on your phone from the Google Voice Mail web site by dialing numbers into your phone. I have tried that twice now, and it still is playing the wrong name . ( I am confused about the setting mentioned above on the phone).
So, any suggestions on clearing up this problem?
smeltn said:
Mine works great, although it took me FOREVER to get it to work correctly and set up.
Also I notice the speaker volume when trying to play messages through speaker phone is horribly low.
Click to expand...
Click to collapse
AGREED! I can't stand the volume of the voicemail!!!
On my post for my problem(above a couple posts), from Google Help Group, I had someone select it as "Answered", and pointed it to a long list of questions, but no answer. I think they must be trying to rack up "I answered it" points or something.
GV seems to be pretty buggy. I may abandon it.
Well, I find using Google Products can be very frustrating. Zero support from Google, and if it is something the community has no idea how to fix, you are SOL.
Not getting any answers on this anywhere.
I had the same problem when setting up my Aria, before I got my Captivate. It would not change the forwarding numbers. I had to change the forwarding number manually on the phone. Settings > Call Settings > Voice Calls > Call Forwarding. (When I got the Captivate I did not have to set up again, AT&T stores the forwarding settings) It also took me a while to get it straight between the difference of the number I forward to, and the number I call when I want to listen.
All in all I thought the Google Voice was a pain to set up, and not as easy to set up as I expected for a Google product. But it does offer features that the iPhone Visual Voicemail did not, like transcribing the message, etc.
I actually would like to use some of the features. But I am pretty frustrated with the bugs. Well, at least, this one bug that I can't get an answer on.
Another bug I experienced, assuming I understand correctly, is that if a 'known' contact calls, it won't ask for the name. But I found the same contact calling me during testing would experienced inconsistently that it would, or would not ask.
If I can just get the darned other person's name from being played when it goes to VM, I'll be able to experiment more.
Oh, one other thing that is happening. Today, I called my Google number, just to see if it had possibly corrected itself. Interestingly it also ran my home phone too, which I had turned off.
So, it just seems not ready for prime time.