Hi,
I'm looking for WM6 original upgrade ROM for HTC P4350. I need KPN (dutch) one. I still have WM5 with IPL/SPL 1.08.0001 (so cannot hard-spl it...)
Can't find this rom at internet, coz 10-2008 was deadline for WM5 -> WM6 upgrading.
Does somebody have this rom in the computer or something like that?
Thanks
Solved via Goldcard
Thanks
Related
(I can´t speak english well.. sorry)
Could Somebody give here the newest english ROM version of MDA Vario?
Or the page, where is an oficial newest updates for it.
there are many roms that work on the mda vario for ext ive had the best experience with the cingular rom from summiter but you could go for any of them
yeah I was a beginner an I am now advance user of HTC wizard. And I have now problem with extROM. I can`t write there :-(.. I was use unlockextrom.ceb and it was unlock extrom to Look an I need unlocke it for write.. On ROM 1.5.x WWE it was posibble and now it isn`t yet .. Is it any way for write to extROM on HTC wizard? I have ROM 2.26 WWE (T-Mobile)
Got a little question for you guys,
Right now I have a Qtek 2.18 Rom installed (which I like very much), but wanna do a hard-reset and was thinking about an upgrade to a newer Dutch Rom.
The only newer Dutch Rom is the T-Mobile 2.21 Rom, but I DO NOT like all the T-Mobile customisations.
So my question is, if I install the T-Mobile Rom and then cut it off right before the customisation tools, will it be a clean Rom then, almost the same if that I would cut of the Qtek 2.18 Rom just before customisation tools will be installed? Or do I still have a lot of T-Mobile junk installed?
If it will be a clean WM5, I will install some of the Qtek and some of the T-Mobile Extended_Rom CABS to get a "normal" WM5 again (with MMS folder, ClearVue PDF and stuff like that).
I ask this question because as far as I know I CAN NOT downgrade to the Qtek 2.18 Rom again once I upgraded it to the T-Mobile 2.21 Rom (am I right?) so I cannot test it out for fun
Regards,
Molski
Upgrading from Qtek 2.18 to T-Mobile 2.21 Rom (no problem!!)
Right now I am at work and got very bored, so I started to do some things for myself....like upgrading my Rom
Although I didn't got an answer to my questions, I took the shot and upgraded to a Dutch T-Mobile 2.21 Rom (with the chance that if I didn't like the T-Mobile Rom full of crap, I couldn't go back to my Dutch Qtek 2.18 Rom!).
So before my lunchbreak I upgraded it to the 2.21 Rom, tested it out for about 2 hours and came to the conclusion that it just sucked. I really don't like ANY carrierlogo's, skins, green batterymeter in the taskbar and other stuff of T-Mobile (cause I hate pink on my phone, it's not a gay or girls phone!).
So I tried to downgrade it and guess what, right NOW (while I am typing) my Rom is downgrading from T-Mobile 2.21 to Qtek 2.18 again without ANY problems!
This are the steps I have done with my Wizard (from the moment I got it):
- CID Unlocked my T-Mobile 1.08 Stock Rom
- Upgraded to this Qtek 2.18 Rom: RUU_Prodigy_2180706_21807106_20710_QTEK_Generic_DUT_Ship_2
- Upgraded again to this T-Mobile 2.21 Rom: RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship
- Downgraded my 2.21 Rom to my (good old) Qtek 2.18 Rom: RUU_Prodigy_2180706_21807106_20710_QTEK_Generic_DUT_Ship_2
So I don't understand why it's possible for me to downgrade/upgrade to whatever Rom I want and that other people have so many problems with this issue.
When Qtek releases a new Dutch Rom (hopefully an AKU2.3 Rom) I will upgrade my Wizard and will see if I can still downgrade it again.
Regards,
Molski
How did you make super CID? What tools did you use for it? I have Qtek 9100, ROM version of this device is 2.17.7.2 WWE.
IPL 2.17.001
SPL 2.17.001
GSM 02.07.10
OS 2.17.7.2
I did the following operations to make the device SUPER CID:
I synchronized the devece with Active Sync 4.1 .
I started aWizard 1.3 beta 1.
I checked options u and e with aWizard 1.3 beta 1.
Then I started Lokiwiz02b and checked option C.
But it did not help.
After that I tried application unlock for SDA, and then started option C with Lokiwiz02b, but it didn't help.
How can I make the device SUPER CID?
When my Wizard got delivered by the mailman, the very first thing I did was CID unlock with LokiWiz 2.0b (the stock rom was a T-Mobile 1.08 Rom), after that I did an upgrade to the Qtek 2.18 Rom, today I did the upgrade to the T-Mobile 2.21 Rom and also today I downgraded it again to the 2.18 Rom.
Nothing more, nothing less
But I wanna know one thing for sure: By the upgrading and downgrading I did I can be sure my Wizard is Super CID unlocked or not (maybe Summiter, Machinagod, Faria or someone else can answer this for me)?
Or do I have to do some more testing to make sure? Right now, I am willing to try any Rom...as long it is in Dutch and not WWE, I would freak out if I upgrade it again to the WWE Mr. Clean Rom or something and then notice that I can't downgrade anymore
Another question:
Is there maybe someone that knows when Qtek is gonna release a new Rom?
I noticed a positive difference in the performance between the 2.18 and 2.21 Rom, but just like I said, I hate T-Mobile Roms, because they have a bunch of crap in them (like carrierlogo's and stuff like that)? And there are no Clean Custom Roms in Dutch language, so I have to stick with the Qtek Roms for now!
Regards,
Molski
Hello,
I've tried to upgrade my French SPV M3000 to the Aku 3.5 V3.5.5.1 Rom...and the upgrade window stopped at 96%...
My SPV M3000 is a G3, with IPL : 1.03 & SPL : 1.03.0000.
Now The PPC is bloked on the 3 colours screen which shows the IPL, SPL but no GSM & no OS on it...so I can't synchronize it with my PC to do any upgrade such as with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe...
What's the solutions ?
Tks for your help...
up, please
Hi i've got the same problem... i was flashing to crossbow 1.5 and it stopped at 5%
please help
guys.. number one.. make sure ur device is CID unlocked before you flash anything but the carrier ROM. for now, go back to the WM5 ROM that your carrier released and try again. I'm guessing that your device isnt a G4, which there would be a totally different procedure to flash WM6 for.
-Nstefanelli-
ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]
KreTsky said:
ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]
Click to expand...
Click to collapse
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back
eleger91 said:
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back
Click to expand...
Click to collapse
Flashing to 2.x IPL/SPL is probably a good idea in your case (hope you have CID unlocked before doing so..) ..I didn't think you can run WM6 with IPL/SPL 1.x.. Not sure if AKU 3.5 means WM5 or WM6..
hello to all,
i have updated may wizard to wm6.1 (WM 6.1 German Build 20273), but my wlan doesnt´t work and i think it is because perhaps i didn´t upgrade ipl/spl from 1.01
is it possible to get back to wm5 with a wizard? with an mda pro it is possible, but with a wizard i don´tknow
it would be nice, if someone could help me.
lg
dietmar
i´m austrian and my english isn´t very well, so excuse my mistakes
I own a Qtek 9100 (G3) with OS Windows Mobile 5.0, would it be possible to upgrade to version 6.5 of Windows Mobile. How? There are real improvements with S.O 6.5?
anyone can me answer?
yes dear
yes dear you can
Hi,
I am a happy owner of a Qtek 9100 which originally had Windows Mobile 5.0 ITA.
course and following the upgrade guide I proceeded on my PocketPC (G3) with "Windows 6.1 beta 2 carbonara" I have to say is very stable.
The only thing I noticed is that after you upgrade your phone with the first ROM so I changed the values IPL and SPL but I do not put them equal, and that is me put them IPL 1.01 to 1.06 SPL I tried to upgrade 3 times and always successful but the values are always different.
So finally I decided to continue, I unlocked the CID with a dedicated tools and since I could not find a good link for the ROM T-LOVE I decided to directly load the ROM of Windows 6.1 to carobonara.
The procedure was successful and the phone is a bomb. I am very satisfied with this ROM, but my question now is:
I find myself with these values
IPL 1.01
SPL 1.06
gsm 01.12.10
OS. 4.0.0.
And 'normal IPL and SPL or need to be in the same? Is there a way to update only those? And from now on I can load any other ROM widzard for G3 even those with Windows 6.5?
Thanks again for your attention!
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
grishitu said:
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
Click to expand...
Click to collapse
you can update from 5.0 to 6.5 directly. .
first read this
http://forum.xda-developers.com/showthread.php?t=332320
after you done it, just download one ROM from this link
http://forum.xda-developers.com/showthread.php?t=492532
and that is that . .
p.s. for this you must have Windows XP and Active Sync 4.5
Help me whit a Qtek 9100
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
gracco said:
anyone can me answer?
Click to expand...
Click to collapse
yes,actually i have a qtek a9100 or htc wizard with windows mobile 6.5,and i think i´m very lucky because the rom works perfect! i downloaded from here,but i dont remember which one exactly,but leave me a message so i can send you by e-mail or something