Setting up ADB? Windows 7 - G1 Q&A, Help & Troubleshooting

im trying to set up a adb so i can use my g1 as a webcam:
http://forum.xda-developers.com/showpost.php?p=4975656&postcount=17
however when i plug in my g1 it says everything was installed except the adb.

Do you have ADB setup on your computer in the first place? If not, http://forum.xda-developers.com/showthread.php?t=532719.

I installed the adb with the sdk as it was mentioned and my computer still doesnt show my phone as an adb device

Did you install the drivers for adb?

i cant find out how!

85Mario85 said:
i cant find out how!
Click to expand...
Click to collapse
a little search and VOILA!!!
http://forum.xda-developers.com/showthread.php?t=446274&highlight=64bit+usb
this works if you are running windoze 7 x64

i dont get how im supposed to put windows 7 on test mode =S

im getting this aswel "When running the command prompt adb install I receive an error dialog stating:
"This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem.""
im getting so frustrrated with thiss

bump! i dont get this =[

Search for pdanet and install it. That's how I set up adb for Windows. (Btw - get rid of Windows. Finally did my switch to ubuntu today - ahahahahahahaha I'm sad I ever even used Windows.)

Yea, but adb is kind of a ***** about permissions and such on ubuntu. But each has its quarks.
@85mario85 - You have to cd to the adb.exe in the tools folder ie. c:\sdk\tools\ then run adb. Or add it to the paths part, but I can't remember at the moment.

evilkorn said:
Yea, but adb is kind of a ***** about permissions and such on ubuntu. But each has its quarks.
@85mario85 - You have to cd to the adb.exe in the tools folder ie. c:\sdk\tools\ then run adb. Or add it to the paths part, but I can't remember at the moment.
Click to expand...
Click to collapse
adding it to the path just saves time. instead of having to cd all the time you can just run adb. i highly suggest it. and i agree - ubuntu is a ***** about permissions all the time. i love it, but i have to learn to use it. however, i'll probably always have a copy of windows in case i can't find out how to do something and have to have it done. better safe than sorry. =]

Related

Free Screenshots using Dalvik - not rec my phone?

I tried to follow the steps from androidandme to set up my phone for screen shots. I got java, got the android sdk and unzipped everything (nothing was installed?), changed the path under advanced settings, dowloaded eclipse (why not) and all that jazz - full 9 yards.
However, when I run ddms.bat in the tools folder and Dalvik comes up it never recognizes my phone. I have tried with the g1 mounted, unmounted, usb debugging on/off (which I also do not know what this means).
Anyone have any thoughts? I did not get any prompts about drivers and I am mounted to my computer.
Read the guides on how to install ADB.
for some reason when i ever i use ddms to take screen shots, i can't just go to take a screenshot, i have to run a logcat first, it will bring up a popup that says "failed!" i then close that and it runs a logcat, after i do that, then i can use it to take a screen shot.
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
s15274n said:
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
Click to expand...
Click to collapse
Sorry if this is not relevant, but I had a ton of trouble until I had the newest jave runtime installed. I never had trouble, got a new laptop at work and had no clue why it would not run. the newest JRE fixed it right up. Maybe not your problem but...
Also I like the program "droid explorer". It has screenshot built in.
EDIT.
I have one more thought...I (always have one more thought) try starting your phone in fastboot (camera and power) then back button when the skaters come up) and see if it asks for drivers then.
s15274n said:
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
Click to expand...
Click to collapse
adb.exe is a command line application, it doesn't have a GUI. To use an command line app you have to 'cd' to the directory where it's located and enter valid commands. I think you can type 'adb help' for a full list of commands.
Try reinstalling the drivers, it took me a few tries to get it working right on Vista (interestingly no drivers are needed for OS X )
Let me start very basic. Is there any "installing" of the SPK? Or, do I just extract the files? I extracted them and created a directory in PATH like the site said to do.
If there is no installation... are you saying for me to get in dos and just start keying commands, and not using any of the files from the zip?
There is no installation, but EVERYTHING for the sdk is ran in command prompt. Meaning click start, click run, type in cmd, then type cd path/to/your/toolsfolder/ then type adb remount see if it does, if not you NEED TO FOLLOW THE ADB INSTRUCTIONS FOR INSTALLING DRIVERS.

Getting Nexus One ADB/USB Mount working (Driver)

Download This file and extract.
hit Windows Key + r
Type in devmgmt.msc
right click on nexus one
click update
update from location on computer.
select that folder.
---------------Notes-------------
Be sure to enable debugging on your phone via Settings>Applications>Devlopment>USB debugging.
Confirmed working on:
Win 7 Ultimate x64/x86
Win 7 Home Edition x86?
Win Vista
XP Home x86
XP Pro x64/x86
O.S
What O.S you had this working on?
@th3fallen
143!!
I got it working on win7 Ultimate version
This works for Windows 7 Home Premium Edition as well.
In order to get ADB working on Linux (Ubuntu 9.04) I had to edit /etc/udev/rules.d/51-android.rules (I may have created this file for the G1) and add:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
What I was seeing was the device would sort of show up when I ran adb devices, but it would list ????????? as the ID and no permissions.
~Kenny
I was able to access it by using dream, magic and adb testing device didnt need any specific driver.
I did this to get it working on win 7 ultimate x64
NexVision said:
I was able to access it by using dream, magic and adb testing device didnt need any specific driver.
Click to expand...
Click to collapse
You need the latest refresh of the drivers (and tools for updated fastboot, etc.) from the SDK. If you go to a Windows command prompt and run Android, assuming the tools directory is in your path, you can select the update for both. It will fail in updating tools, since you are using an app in it, but don't close the app, just reapply at that point and it will work on the second go. Then when you install the N1, you will have the drivers you need to install as before.
Not meaning to argue with you but what I was saying is I have had no issues doing anything via adb with it as a magic I have done fastboot as well hey maybe its just working for me.
kfk2 said:
In order to get ADB working on Linux (Ubuntu 9.04) I had to edit /etc/udev/rules.d/51-android-rules (I may have created this file for the G1) and add:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
What I was seeing was the device would sort of show up when I ran adb devices, but it would list ????????? as the ID and no permissions.
~Kenny
Click to expand...
Click to collapse
Hmm...I have that already in my /etc/udev/rules.d/51-android.rules (mine has .rules, not -rules...I'm assuming that's a typo in your post?) and I'm still coming up with ?????????? as the device and no permissions, all attempts to do anything with adb result in it telling me I don't have permission to do these things.
Swervo said:
Hmm...I have that already in my /etc/udev/rules.d/51-android.rules (mine has .rules, not -rules...I'm assuming that's a typo in your post?) and I'm still coming up with ?????????? as the device and no permissions, all attempts to do anything with adb result in it telling me I don't have permission to do these things.
Click to expand...
Click to collapse
Yah that was a typo.. The no permissions error appears to me that adb doesn't have access to the /dev/ devices used. I'm not at home so I cannot lookup what device is created and used in /dev/ for you to check the permissions. I know I killed the adb server and restarted it a few times while trying to get mine to work, along with updating to the latest sdk. So you may want to try those things, you could also try running adb as root and seeing if that fixes it (if so, then it's a simple permission error with udev not creating it with correct permissions).
Alrighty, I think I got it. I'm no udev expert (in fact, I'm rather useless at it), but this worked for me.
1) Make sure USB debugging is turned on on the phone.
2) Plug the phone into the USB port on the machine.
3) Make sure /etc/udev/51-android.rules has
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
Click to expand...
Click to collapse
in it.
4) run
adb kill-server
Click to expand...
Click to collapse
5) As root, run
service udev restart
Click to expand...
Click to collapse
6) run
adb start-server
Click to expand...
Click to collapse
Worked for me to get the device recognized.
Hey guys, I have the Android 1.5 SDK/ADB installed on my computer.. so I don't know what will happen when I mount my N1 (haven't tried yet). I want to be able to mount my N1 normally without ADB or anything, 'cause I'm not going to root it for a while. Thanks!
Confirmed on Vista
I can confirm that the instructions in the OP work on Vista. Thanks a lot, th3fallen.
Alleviate said:
Hey guys, I have the Android 1.5 SDK/ADB installed on my computer.. so I don't know what will happen when I mount my N1 (haven't tried yet). I want to be able to mount my N1 normally without ADB or anything, 'cause I'm not going to root it for a while. Thanks!
Click to expand...
Click to collapse
Nothing will happen, ADB doesn't start interacting with your phone without you explicitly telling it to. Also, if you don't have debugging turned on on your phone, then it won't even if you do explicitly tell it to. Feel free to mount the drive on it.
ADB and Root
Maybe I'm doing something wrong, but I can't get ADB to recognize my phone. ADB is all set up correctly, I have it updated (I believe) to the most recent version. I installed the updated USB driver and I see the "Android Phone" in my device manager. I have USB Debugging checked off in my phone settings. ADB worked fine for my G1, but it doesn't recognize my Nexus One.
I shouldn't have to root the phone to have ADB working should I? Can anybody think of something I overlooked? I am running Windows XP Professional SP3
Okay, so I navigated to the "1.1-nexusone-superboot" folder in the command prompt and tried
Code:
adb-windows devices
and my device showed up. Now I want to move those files to where I originally had my adb files in C:\android-sdk-windows\tools so that all I have to type is
Code:
adb devices
to have my phone listed. I tried replacing the files in my \tools folder and renaming them to what they were named before, but that didn't work. Could somebody please help me get this set up properly?
ccunningham83 said:
Okay, so I navigated to the "1.1-nexusone-superboot" folder in the command prompt and tried
Code:
adb-windows remount
and my device showed up. Now I want to move those files to where I originally had my adb files in C:\android-sdk-windows\tools so that all I have to type is
Code:
adb devices
to have my phone listed. I tried replacing the files in my \tools folder and renaming them to what they were named before, but that didn't work. Could somebody please help me get this set up properly?
Click to expand...
Click to collapse
in your command prompt you have to be in the c:\android-sdk-windows\tools\ directory for it to work
ccunningham83 said:
Maybe I'm doing something wrong, but I can't get ADB to recognize my phone. ADB is all set up correctly, I have it updated (I believe) to the most recent version. I installed the updated USB driver and I see the "Android Phone" in my device manager. I have USB Debugging checked off in my phone settings. ADB worked fine for my G1, but it doesn't recognize my Nexus One.
I shouldn't have to root the phone to have ADB working should I? Can anybody think of something I overlooked? I am running Windows XP Professional SP3
Click to expand...
Click to collapse
I was having the same problem yesterday. But i'm on Vista. Nothing seemed to work, but ADB was working fine on my Mytouch. At any rate, I ended up going to download the most recent SDK and trying adb again from a command prompt @ the tools location of the newest SDK, and then everything worked. I don't know if that was something I should have done in the first place and I just didn't know it (duh), but that's what worked for me.

Help with Set Up?

Can anybody help me set up ADB, SDK, and Emulator. I've tried all of the guides but I just don;t understand any of it. I really want Emulator too so f anyone can help, that'd be greatly appriciated. Thanks =D
I have a black G1 with Danger SPL and the latest Radio. I use a Windows Vista laptop and have the SDK downloaded in the C:/ folder but it's the zipped file. Should it be extracted in there? I've tried to do the whole SDK Setup process but for some odd reason it always downloads everything except for like, the firmwares like 1.0,1.1,1.5,1.6,2.0,2.0.1,2.1 or anything.
G1BRICKED said:
Can anybody help me set up ADB, SDK, and Emulator. I've tried all of the guides but I just don;t understand any of it. I really want Emulator too so f anyone can help, that'd be greatly appriciated. Thanks =D
I have a black G1 with Danger SPL and the latest Radio. I use a Windows Vista laptop and have the SDK downloaded in the C:/ folder but it's the zipped file. Should it be extracted in there? I've tried to do the whole SDK Setup process but for some odd reason it always downloads everything except for like, the firmwares like 1.0,1.1,1.5,1.6,2.0,2.0.1,2.1 or anything.
Click to expand...
Click to collapse
Make sure that you have the usb drivers installed as well.
What i've done is exacted it to C:\sdk\ It makes navigating to it in CMD a lot easier. Once you have that done open CMD and type the following
Code:
cd C:\sdk\tools
adb shell
This will find your device (make sure it's not mounted and USB Debugging is enabled (default in most roms) and put you into an ADB environment.
this is a really good tool too:
nephron said:
Droid Explorer by Camalot
Droid Explorer is a Windows software that will download, install, and setup the android SDK for you all in under a minute so you are ready to go. I use this on a daily basis. This amazing piece of software has tons of plugins and a built in file explorer for all your files on your phone! All you gotta do is download, install, and go!
Download Droid Explorer - here
Install the program, and let it setup the SDK files for you
Connect your phone
Enjoy!
Click to expand...
Click to collapse
Also at what point are you having issues with setting this up?
nolimit78 said:
Make sure that you have the usb drivers installed as well.
What i've done is exacted it to C:\sdk\ It makes navigating to it in CMD a lot easier. Once you have that done open CMD and type the following
Code:
cd C:\sdk\tools
adb shell
This will find your device (make sure it's not mounted and USB Debugging is enabled (default in most roms) and put you into an ADB environment.
this is a really good tool too:
Click to expand...
Click to collapse
Ok so I have it setup as C:\android-sdk-windows and then all of the files. When I type in the first command it says
Code:
The system cannot find the path specified.
And I have the Droid Explorer Installed and everything but it doesn't have the Emulator and that's all I really want. That and FastBoot.
nolimit78 said:
Make sure that you have the usb drivers installed as well.
What i've done is exacted it to C:\sdk\ It makes navigating to it in CMD a lot easier. Once you have that done open CMD and type the following
Code:
cd [B]C:\sdk\tools[/B]
adb shell
This will find your device (make sure it's not mounted and USB Debugging is enabled (default in most roms) and put you into an ADB environment.
this is a really good tool too:
Click to expand...
Click to collapse
If you noticed it extracted it to C:\sdk\tools, you did yours to C:\android-sdk-windows. So you'll need to adapt to the changes..
Code:
cd C:\android-sdk-windows\tools
adb shell
Now it says,
Code:
Error: device not found
G1 is in Debugging mode and all.
G1BRICKED said:
Now it says,
Code:
Error: device not found
G1 is in Debugging mode and all.
Click to expand...
Click to collapse
A friend of mine had the same problem. Make sure the device is plugged into the back of your computer, reboot the PC and the Phone. See if that helps. And which ROM are you running?
Well see I'm on VegaMans Beta Legend Port, and my phone won't show up on my laptop at all not to mount or anything all that appears is the notification in my bar saying;
Code:
USB Debugging Connected
Select to disable USB Debugging
G1BRICKED said:
Well see I'm on VegaMans Beta Legend Port, and my phone won't show up on my laptop at all not to mount or anything all that appears is the notification in my bar saying;
Code:
USB Debugging Connected
Select to disable USB Debugging
Click to expand...
Click to collapse
I saw that, It could be that USB Debug is broken on the ROM (it is in early beta) Try using a different rom.
nolimit78 said:
I saw that, It could be that USB Debug is broken on the ROM (it is in early beta) Try using a different rom.
Click to expand...
Click to collapse
Well man, I tried it on FastTest and now I have a Custom Splash1 Image and now I'm not afraid of holding the Back button with the Red one. I think I'm going to throw Sense UI off to the side for now until it supports ADB and all. So thanks man, after all these monthes I finally have ADB Access. One more thing though, how can I get Emulator to work?
Now, when I try to go into Emulator through CMD, I se this;
Code:
C:\android-sdk-windows\tools>emulator
emulator: ERROR: You did not specify a virtual device name, and the system
directory could not be found.
If you are an Android SDK user, please use '@<name>' or '-avd <name>'
to start a given virtual device (see -help-avd for details).
Otherwise, follow the instructions in -help-disk-images to start the emulator
Then, I navigate to C:/Windows-SDK-Windows/SDK Setup and I allow it to run. I get two windows, one that says
Code:
Failed to fetch URL https://dl-ssl.google.com/android/repository/repository.xml, reason: HTTPS SSL error. You might want to force download through HTTP in the settings.
I close that window and go to the one that says Choose Package To Install, but the white box on the side is blank. I close that and go to Android SDK And AVD Manager. From there I go to Virtual Devices and it's blank and grey-ed out. I click new and see
Code:
Name - [I]Here I can write[/I]
Target - [I]Here I can't write[/I]
SD Card: Size [I]Here I can write[/I] MiB or KiB
File: [I]Here I can't write[/I] Browse [COLOR="DarkRed"]Dulled out[/COLOR]
Screw skins and Hardware I can do that on my own, but how can I set a Target if it is grey-ed out?
G1BRICKED said:
how can I get Emulator to work?
Click to expand...
Click to collapse
that is something I can't help you with. I am at work and it won't allow me to download what I need for that. But I am glad you got ADB workin!
Lol thanks =D

ADB HELP

I have tried every process I can find in the forum regarding rooting and ADB but I cannot seem to figure this out. I would like to think that I am computer literate and that I know my way around pretty well but somehow this escapes me. I am running Windows 7 64 bit and can't seem to get anything right as far as this process goes.
Is there a rooting/adb for dummies section that someone can point me to?
the sticky wiki for guides at the top of the front page....
try to look around a little before starting new threads.
beyondinferno said:
the sticky wiki for guides at the top of the front page....
try to look around a little before starting new threads.
Click to expand...
Click to collapse
Thanks for your help...I did look around but I still can't get it to work. I've been through quite a few threads. I don't know if I'm missing something somewhere or what.
is your problem your computer not seeing the phone?
i RUU'd my phone earlier today to test out something i did, but then i found out that adb couldn't connect anymore. i'm still trying to figure it out.
Exactly what are ya having problems with?
http://forum.xda-developers.com/showthread.php?t=502010
1. HTC Sync installed?
2. Android SDK downloaded?
3. Debugging enabled on the phone?
4. is ADB showing up in the Device manager?
5. Check this thread out dealing with x64 drivers
http://forum.xda-developers.com/showthread.php?t=560962
Hmmm..
I have Win7 64bit too
I think I just downloaded the newest Android SDK and HtcSync for the Eris. It
works fine for me. What exactly is the issue? You have the phone in debug mode or whatever mode right?
some folks have used PdaNet
http://www.junefabrics.com/android/download.php
first off, I can't get Sync to work at all no matter which version I've tried. Then the drivers won't load for sdk. it just seems like nothing is working together at all.
alright, i figured it out.
uninstall HTC Sync and the HTC Drivers.
reinstall.
done.
justinisyoung said:
alright, i figured it out.
uninstall HTC Sync and the HTC Drivers.
reinstall.
done.
Click to expand...
Click to collapse
yeah just make sure you use the newest HTC Sync for the Eris!
just out of curiosity why the eris? am i going to have issues later down the road?
DanWalker said:
I have tried every process I can find in the forum regarding rooting and ADB but I cannot seem to figure this out. I would like to think that I am computer literate and that I know my way around pretty well but somehow this escapes me. I am running Windows 7 64 bit and can't seem to get anything right as far as this process goes.
Is there a rooting/adb for dummies section that someone can point me to?
Click to expand...
Click to collapse
Alright... what's your main problem? Are you not able to get the ADB driver to work with your phone in Windows 7 64 bit -- if so, do know that it is possible, because I have it working fine on my computer (Win 7 64B).
If ADB driver situation is your problem, do as follows:
1. Download the file below (to desktop for easy access - This is the Vista 64 bit Drivers)
2. Unzip
3. Go to Device Manager
4. Find ADB (It should come up as ADB with a Yellow Exclamation mark next to it)
5. Right click on it, choose update driver
6. When it asks you to auto find the driver or browse for the driver -- choose BROWSE.
7. Set the path to where you downloaded the file, and then click next.
8. If done correctly, you should see a window pop up that says "Successfully installed My HTC driver".
ADB will work after that is complete. To test, open CMD - go to androidsdk\tools folder, and then run adb devices (If serial # appears, there you have it).
Also with the method above, this will allow the HTC Sync application to work as well.
Source: ME, tested extensively and more than once.
DanWalker said:
just out of curiosity why the eris? am i going to have issues later down the road?
Click to expand...
Click to collapse
HTC Sync for the Hero was released before Win7, so the Vista drivers will work but you have to jump through some hoops.
Now the Eris version is the same HTC Sync but it has drivers for Windows 7, it is the same software but is bundled with newer drivers.
Roger that guys, thanks for the help. I will attempt tonight when I get back to my computer.
Ok just got home and am doing the suggested things, after installing the SDK it wants me to install packages and when I choose cancel, windows says the program was not installed correctly. what do i need to install?!
Also no ADB in device manager!
yeah they took out the packages of the SDK, so you have to add them in as needed.
I have a 2nd Win7 box that's an Android virgin, I will try and run through the install tonight(off at 5pm PST)when I get home and I'll document the install.
hang in there.
rlaxton said:
yeah they took out the packages of the SDK, so you have to add them in as needed.
I have a 2nd Win7 box that's an Android virgin, I will try and run through the install tonight(off at 5pm PST)when I get home and I'll document the install.
hang in there.
Click to expand...
Click to collapse
That would be awesome, I'm at the point where I am just about to give up. I have never been so frustrated with a computer. This is the first Windows 7 system I have done anything with and I already don't like it.
DanWalker said:
Ok just got home and am doing the suggested things, after installing the SDK it wants me to install packages and when I choose cancel, windows says the program was not installed correctly. what do i need to install?!
Also no ADB in device manager!
Click to expand...
Click to collapse
Install packages? What? Weird, the Android SDK is natively 32 bit, but will work in Windows 7 64 BIT (That's what I'm running now).
Alright, steps to take:
1. Uninstall/remove everything you did before.
2. Grab the Windows Android SDK -- download it (to the desktop is fine)
3. UNZIP/Extract the SDK
4. Drag the Android SDK to the root of your drive (Local Disk C: )
5. For easy access purposes, RENAME the Android SDK from what you see to something like: androidsdk
6. Open Command Prompt
7. Verify that you can get to the "androidsdk" directory by running the command: cd androidsdk\tools
8. If you can get there -- then good, so far.
9. Now to test "adb" -- Have your phone connected to the PC.
10. While still in command prompt and STILL in the c:\androidsdk\tools: dir... run command: adb devices
11. This should return your Serial #
12. If your serial # shows up, then make sure you can run the command adb shell and see if you get the # sign, which indicates that you are rooted -- If not, then you need to begin the process of rooting your phone.
Also, if ADB doesn't work after this point, do what I told you earlier, I can guarantee that it does work, because I actually did it this morning on my work computer (Which is Windows 7 64 Bit).
Good luck, report back.
Holy crap it looks like it worked!! Thanks Pseudo! Now if I could only get my damn phone to find Sync I'd be all set.
Still can't get sync to register with phone but that's no biggie. But have a small issue that I dunno where to look to find an answer. I'm trying to update my recovery from 1.5.2 to 1.6.2 and can't seem to follow the directions appropriately.
via adb -> Requires a custom recovery (with test-keys)
Code:
Copy recovery-RA-heroc-v1.6.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
None of that seems to work lol.
So since we're on the subject does anyone know how to set up the drivers for linux mint kde? I'm brand new to linux and I've managed to do some things but that is just one thing that i cant do so far and after almost a day pf searching this forum and others i just cant seem to get it
DanWalker said:
Holy crap it looks like it worked!! Thanks Pseudo! Now if I could only get my damn phone to find Sync I'd be all set.
Still can't get sync to register with phone but that's no biggie. But have a small issue that I dunno where to look to find an answer.
Click to expand...
Click to collapse
First off, no problem for the help -- glad it worked. What ROM are you currently running, that would be helpful in solving your sync issue.
DanWalker said:
I'm trying to update my recovery from 1.5.2 to 1.6.2 and can't seem to follow the directions appropriately.
Click to expand...
Click to collapse
Alright, lets begin - To upgrade to RA 1.6.2, (You have to be in recovery mode (Home + Power) -- and also have your phone connected to the PC). Then do as follows:
1. Download the 1.6.2 file
2. Copy or move it to your androidsdk\tools folder
3. Run commands below:
Code:
adb push recovery-RA-heroc-v1.6.2.img /sdcard
Code:
C:\AndroidSDK\tools>adb shell
Code:
mount -a
You'll probably get the next line below -- that's okay.
Code:
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
Keep going...
Code:
flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
After you do this, the shell should return #, if it does, then run:
Code:
reboot recovery
Now verify that your recovery says 1.6.2.
Good luck.
thatguythatdid said:
So since we're on the subject does anyone know how to set up the drivers for linux mint kde? I'm brand new to linux and I've managed to do some things but that is just one thing that i cant do so far and after almost a day pf searching this forum and others i just cant seem to get it
Click to expand...
Click to collapse
Well, since you've asked a good question, I shall direct you in the right direction. Linux Mint is a derivative of Ubuntu, so this guide should work for you., however do note that I have not tested this in Linux Mint, as I currently run Ubuntu 9.10, but you should be okay.
Go HERE and bookmark this page for reference, it has some good stuff -- Now this guide is not directly for our phones (CDMA HERO), however the directions, if followed correctly... DO WORK and have been tested by me (did this last night) with successful results.
When you get to the web page, start at "Generic Linux Instructions". Also, when you get to the heading "Set up ubuntu to recognize your phone, and the adb/fastboot commands in the terminal" -- step 4 will ask you to create an empty file, use the Ubuntu 9.10 format and NOT the older versions, again this format should work in the latest version of Linux Mint.
Hope that helps. Also, if have problems or want a step by step tutorial (pending how "new" to Linux you are), just ask me or PM me, I'll write one up.

[Q] HELP... Problem with ADB in C# Program.

ok, so i wrote a program in C# that will open a process CMD.exe and send adb Commands from a Working directory i setup previously that includes Adb and all the other goodies i need for automating the process of rooting and such.
here's my issue, the program will work perfectly in Win 7, but when i run in XP,
i run ADB shell reboot. the phone will reboot. but never reconnect until i end the my program process. ive tried adb kill-server. tried closing the process within my program. i do notice in XP adb will open two adb.exe processes. even when running outside of my program in the command prompt.
i am using a backgroundworker thread to send the commands.
any help is appreciated.
let me know if you want me to post some code. though i don't think its the programming.
Don't think its the programming either. XP has all sorts of weird bugs and why I jumped ship immediately when 7 came out and have been quite happy since. Don't know much about programming but I've read alot of issues with XP and adb. Stick with 7 if you can.
ok, so still haven't found out why adb doesn't like Win XP. the way i got around it was to drop C# for the ADB commands. i made a batch script to run my adb commands. and a C# console app to send the Serial Modem Commands(for PRL and NV item writing) that i call in my Batch file.
but if anyone has any tips to try ill for sure try them.
more detailed description.
i create a new thread that will create a Process of cmd.exe then do a process.StandardInput("ADB Commands");
the current running thread will finish before the next can be started so no prob with multiple threads running.
all my adb commands ie. adb push recovery.img /wherever/recovery.img
work just fine and does what its 'spose to.
until i get to adb shell reboot.
the phone will reboot but the adb driver is never reconnected after the reboot. like it normally would when running the command from the terminal.
i will have to close my C# program before it will connect and recognize the driver again.
again all this works just fine in Win 7.
i also tried to do a "Scan new Hardware" in device manager after reboot and both programs will just go unresponsive at that point.
next, i will attempt to make my own ADB in C#. if im not mistaken adb uses a TCP connection to communicate with the device. default port 5037 me thinks.
@TronofTroy
Hey do you mind sharing a couple of commands with me in C# on how to write the prl n nv items please.
Also I have been trying to send commands from a windows based form in C# but I can figure out how to do it properly.
Thank You very much!
I just use batch scripts and run them.
filmaker said:
I just use batch scripts and run them.
Click to expand...
Click to collapse
U mean u can write prl, nam, and Evdo with a batch script?
Slinged from my iPhone 4 On Straight Talk using Tapatalk

Categories

Resources