Thus far, I've been unable to use my AT&T Tilt as a wireless modem for my Vista laptop. I've partnered them in the MS Bluetooth Stack, then gone to Windows --> Internet sharing and set it to bluetooth pan and media net, then on my computer, gone to "connect to" and opened the bluetooth pan connection. Unfortunately, at this point, my phone doesn't show up as a devic for bluetooth pan. If anyone can offer up some advice, I'd really appreciate it. Thanks
I would also like to add that Bluetooth PAN also doesn't work for me in XP (SP2). It doesn't show up in the the Bluetooth Device Wizard (the one used to add devices with PAN services), but clearly broadcasting is enabled in the options.
Also, just as a side note, I can't get USB tethering to work either...I'd really appreciate any help I can get with this tethering problem. Thanks.
Got it working. I have no idea why, but for some reason when i tried repairing it for the sixth time or so, vista suddenly decided it had drivers to install for my tilt, and it went ahead and installed the modem driver. now everything seems to be working.
By Bluetooth or USB? Or did you get both working?
Why bother with Bluetooth or USB headaches?? Just use WMWiFiRouter and connect to your phone over Wifi.
Hey everyone!!
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
It works with cable but not Bluetooth (BL).
I appreciate comments.
Thanks
A.Bagatov said:
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
Click to expand...
Click to collapse
It worked pretty easy on my S730. Make sure you enable BT on the phone and your computer. Pair the PC with the S730 and start ActiveSync on your mobile. Select the option 'Connect via Bluetooth' and that was it (for me).
you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices
A.Bagatov said:
you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices
Click to expand...
Click to collapse
I use Windows Vista Business (32-bit) and I needed to upgrade Mobile Device Center. It works without any problems afterwards. The only disadvantage is that I need to manually connect on my phone, before it starts synchronizing. I would rather have it syncronized whenever it is near my laptop.
it doesnt work for me. bluetooth is turned on in both devices.
does anyone have any suggestions?
i have the toshiba bluetooth stack software, do you use that too??
I had the same problem. Open you WMDC and go into Mobile Device Settings and select Connection Settings. Under Allow connection to one of the following: change the selection from Bluetooth to COM7.
Then open your device and set up your bluetooth connection again. You should see Activesync now.
You are most likely using the Toshiba Bluetooth Stack instead of WIDCOMM.
IT IS NOT WORKING
AAAAAAAAAHHHHHHHHHHHHHHHHH
this is so STUPID
when i try to set up on my phone then it says "you have no partner for activeysnc, get one?"
i say YES and choose my computer
then i can select a port a one point and i CANT select 7
whats the solution!=?!
From your response I think you are trying to set the COM port on your device but you should be changing it in Windows Mobile Device Center.
I'll go step by step in case I was not clear.
1- Disconnect your Wing from your computer.
2- Open Windows Mobile Device Center
3- The only option should be "Mobile Device Settings"
4- In Mobile Device Settings you should have two option Connection Settings and End a partnership, select Connection Settings.
5- Under the second check box "Allow connection to one of the following" there is a drop-down box which should currently read "Bluetooth". In the drop-down box change that selection to COM7.
Note: If COM7 is not available, then I suggest you uninstall your Bluetooth device drivers and then reinstall them.
6- Close Windows Mobile Device Center
Now return to your device.
Delete any existing Bluetooth connections to your computer. and reestablish your Bluetooth connection. You don't need to change any COM settings on your device. Just establish your connection and you should have the Activesync option once it is reconnected.
This is under the assumption that you are running the Toshiba Bluetooth Stack on your computer. If you are and it doesn't work, I'm all out of ideas.
I should have specified that as of Step 2 above, this is all done on your computer not your smartphone, i.e. HTC Wings.
Your problem with Bluetooth is on the computer not the device, most likely.
this doesnt work... i did all the things like u told me on the computer.
then i go to my phone and try to connect from activesync via bluetooth and it says that no computer with a partnership could be found?? even though i actually made bluetooth partnership with my pc. when i added my pc to my bluetooth devices list on my HTC it told me that my pc supported 2 services: stereo audio and com port. i ticked com port... it doesnt seem to help.
on my pc, when i open the bluetooth stack software from toshiba i can see my phone has a partnership with my pc. but it has a network symbol on it.. is this supposed to be like that? ah this is so frustrating? any suggestions?
The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.
Something currious happened with my device when I was reestablishing my Bluetooth connection, which may be of interest to you.
I erased my original Bluetooth connection and while reestablishing it my device was also connected to my computer with the USB cable. When I paired the device, there was no option for ActiveSync. I disconnected my device and then started the Bluetooth pairing over and this time ActiveSync was available.
Does this help?
Any of you guys who have sucessfully pairedd WDMC in Vista with S730 over bluetooth use original MS out-of-box bluetooth drivers?
I've only used the Toshiba and Widcomm Bluetooth Stacks and have been able to sync with both on Vista.
dagobert_29 said:
The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.
Click to expand...
Click to collapse
there is the problem: "You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection."
because as soon as i enter the bluetooth password on my phone and computer, there appears a bluetooth connection in the manager from toshiba. this connection has a "network" symbol and the services offered are com port and stereo audio. thats not much is it? and also when i click "connect" an error comes up.. connection couldnt be established or something.
i hate this. how can be a SIMPLE task so problematic?
toshiba drivers are working fine. send and receive works. and my phone is fine too. the wmdc work fine as well via USB. i also installed the wmdc UPDATE..... wtf right?!
Hey A.Bagatov,
I'm at a complete loss to understand why you can't get WMDC to work with your phone over BT. You've done everything I've done but unlike you I was able toe stablish the connection.
The only other thing I can think of is to download the latest BT drivers from Toshiba. But before you install them, make a copy of the TosBtChk.dll file and once you've completed the installation of your new BT drivers, replace the new TosBtChk.dll with the one you saved. This will stop you from receiving the trial period notification.
If that doesn't work, then maybe replace your Toshiba BT stack with the Widcomm stack. You'll need to locate a version compatible with your computer.
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS
A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
I've also got a Sony Vaio, SZ45, and on the Notebook Review forum, there is a thread that discusses replacing the Toshiba BT stack with Widcomm, which you can get free of charge. The thread offers a modified file which should be sufficient to enable Widcommon your laptop. Here's a link to the general forum http://forum.notebookreview.com/forumdisplay.php?f=8
mpattonm said:
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS
Click to expand...
Click to collapse
Microsoft are not the developers of the Widcomm Bluetooth Stack, it's owned by Broadcom. It can be obtained for free, however, you're right in saying it may not work with non-Broadcom hardware. In A.Bagatov's case, the issue is with Toshiba not Microsoft. They are the one's who developed a driver that is not always compatible with non-Toshiba products.
According to other posts I've, the Microsoft generic Bluetooth drivers would appear to work just fine with Windows Mobile devices, however, I was unable to get it working and did not pursue the matter any further once I was able to get the Toshiba BT Stack to function.
I can sympathize with your frustration, but your post does not help him solve his problem.
Is there away to use the tilt as a gps receiver for my laptop?
Thanks
I believe the easiest way is to use GPS Gate
I am interested in this too. do you have any experience with gps gate? what application is the gps able to interface with on the laptop?
I tried gps gate but could'nt get it to work with microsoft sreets and trips.basicly any software uses gps should be able to use the tilts gps.just need a better way to foward it to the laptop.also don't like having to use active sync for gps gate to locate the phone on the laptop.
There's GPS2Blue, it's free but less simple to use.
GPS2Blue works very well. But, kilrah is correct that it can be a pita to setup. After some searching I did find a nice walkthrough on this site - basically, it's all about setting the com ports correctly and weather you want it to use BT or the usb cable for transferring data. I had some problems with BT initially so I used the cable connection. Which I personally think is better anyway because it will charge your phone at the same time. I'm using this solution in a CarPC. It is awesome.
Did you actually get GPS2Blue to work over BT? I can't. Setup suggests to create an incoming COM port in the BT settings, but on my WM6.1 ROM this option doesn't exist. If I jsut choose a random BT COM port in the program (tried all) all I get is IO Exception, waiting for BT to be enabled (it is obviously on).
Disregard, found solution. For some reason they removed the incoming port config option from WM6 on, but it's still possible to add one via the registry, and once this is done it works perfectly well.
http://forum.xda-developers.com/showpost.php?p=2157013&postcount=23
Hello
I have some gps software on my laptop. i was wondering if anyone has used the gps unit on the tytn/touch pro wiht a laptop. ie configure the gps on com4 as a outgoing port to use with laptop/computer.
thanks
s
saleemarshad said:
Hello
I have some gps software on my laptop. i was wondering if anyone has used the gps unit on the tytn/touch pro wiht a laptop. ie configure the gps on com4 as a outgoing port to use with laptop/computer.
thanks
s
Click to expand...
Click to collapse
Try http://franson.com/gpsgate/
This is not free, but I guess you can try the trial version. In the windows mobile client you can use activesync as output and connect your phone to your computer. gpsgate should work on your computer after some configuration, I don't have full details but you can read at the above link.
I use gpsgate on my phone but I did not try on my computer.
I actually ordered a usb GPS 'dongle' and it's about the size of a USB flash drive or a BT dongle. I originally planned on taking it apart and hardwiring it into the motherboard of my laptop, but I think i'm going to hold off on it. Might make a good alternative to using the BT on your phone for GPS though.
There is a free app called GPS2BLUE (I think) that can send GPS data to your laptop through BT. I never test it, but as I remember, this was what it was made for.
Hey guys , so i have a netbook with bluetooth (lenovo S10) and my HTC touch Pro. I wanted to control my netbook with myphone using Gremote either via bluetooth or wifi.
First, i tried the bluetooth method. I followed the instrution at the main site and got all the way until i have to setup a PAN in my netbook. However i couldn't find any option to setup a PAN so i couldn't control my netbook with myphone via bluetooth.
Then i proceded to create an ad-hoc wifi network from my netbook. I made it's SSID and then set it as not using any encryption and the network key is automatically provided by windows. My phone detected the network and connected successfully to it. Both had ip's for within the network. Now the Gremote server is already running in my computer. I started the Gremote app in my phone and then went on to create a profile. When i press the FIND button (to search for the ip address) it says couldn't find ip. However in my netbook, The Gremote server shows in it's log file that it received request search from [my phone's ip here].
What is wrong? My netbook seems to be detecting my phone attempting to connect to it but the gremote app on my phone shows that it couldn't find anything?
P/s: I've tried manually key-ing the ipaddress and it didn't work.
Ive had that issue before and other issue with the app. Its strange, one day it will just start working.
For the bluetooth, make sure you have a serial port open, but i have yet to see a bluetooth stack on a PC that doesnt have an option to activate PAN.
With the wifi, you said you manually keyed it in, are you getting that IP from the status page on the gremote server app? make sure you have that port open as well, i think its 5656 or something.
you should try to
1. connect to your PC using a router
2. Drop the wep encyption on your adhoc connection
3. use a static IP for your PC
4. have your phone connected to the wifi connection for atleast 20 seconds before you try to initiate control with gremote.
ive used gremote on 2 laptops and a PC. the PC is my home PC which is the only one that has given me an issue. Regardless, it works now. One day it just started working. on the PC i can use gremote through my router wifi, adhoc connection straight to it, or bluetooth pan. On my laptop i use it through router wifi and adhoc without ever having an issue. on my sisters laptop ive used it with a adhoc connection......still no issue.
Keep messing with it. The only problems ive ever had seemed to have worked themselves out after a couple days.
Thanks YL Groper. Actually about 2 nights ago, i was playing around and it most certainly worked suddenly.
I made a standard Ad hoc network (open without encryption) and let it run. However my computer couldn't detect the network (which was created from the computer). Then i input the SSID to my Touch Pro, and it found the network. After being connected to the network, my computer found the network as well and begin to connect to it. Once it got the ip, my phone could retrieve the ip from the computer and now i have no problem