Imagio Die,help me,please!! - Imagio ROM Development

used tools of HTC HD for HTC Imagio, and Imagio could not operate and get to BL, HR. When I connected Imagio with computer, the computer got it in Qualcom CDMA Technologies MSM.
Please help me!!
Sorry ,My English is verry bad.

Turn your phone off ... hold call and end button ... then press volume down ....

nile1801 said:
Turn your phone off ... hold call and end button ... then press volume down ....
Click to expand...
Click to collapse
But It could not be got to BL. huhu

turn your phone off hold end and send keys and use mr1 upgrade should work fine after that

Your Imagio is bricked...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list

Related

dead wing

is there any way to fix a wing that will not power up, wont go into bootloader mode and no lights come on when you plug it in?
Try hard reset via soft button and power button
daveoflave said:
is there any way to fix a wing that will not power up, wont go into bootloader mode and no lights come on when you plug it in?
Click to expand...
Click to collapse
can not enter bootloader...
are you sure about your operation?
turn off, unplug USB, hold camera button then plug USB.
if you can not enter bootloader, the only way is send to HTC service center.
Hikey said:
if you can not enter bootloader, the only way is send to HTC service center.
Click to expand...
Click to collapse
Not true, if there is no serious hw defect I can unbrick it with my "FrankenKaiser" unbricker tool set.
Does your PC prompt you to install drivers if you connect it via USB?
yea i dosent do anything when i plug it in
Ive got the same problem... flashing a wing from vista and it totally died. cant get into bootloader, cant get computer to recognize, cant get a peep out of the little guy.
My computer went into standby while flashing the rom, then it went into the bootloader and I tried to re-flash, then the progress bar came on the screen of the wing, then it went kaput for good!
i emailed HTC to see if they would run it over in a bus for me.
It worrrkkk!!!!
im a newbie to all this i recently bricked my wing nothing turned on no light nothing, then i was reading this post and it does work. wat i did i took out my battery put it back in then i held down the camera button and then pluged in the usb and BOOOMMMMMMMM! it went into bootloader! ahahahahahhahahah. so for all you people out there if i can do it you can too!

hardware button stuck

Hello guys, i was just using my phone normally and the volume down button got stuck!
Now when I turn on the device it always goes to "serial" bootloader screen, although I can keep volume up button pressed (volume down + volume up only) and the device will enter in Windows Mobile.
Anyway in Windows I cant access volume control . Try pressing the two volume buttons in the same time.
Anyone knows some way I can manage sound volume without the volume buttons? Anyone fenced a hardware button stuck problem like these? Should I try open and fix my phone?
I have the same problem but with the Power button. I still don't know if to open it or send it to HTC for repair. I live in Argentina and HTC doesnt have a support center, but in Brasil there is one. I would love to live in Brasil and be able to send it for repair. I am almost about to go by car from Buenos Aires to Sao Paulo.
yeah, Monday I will call brazilian hot line and discover what they can do for me. My biggest problem is that my model is from Europe and not the brazilian one.
maybe I can contact some guys in Htc Brazil to help you.
I had this problem breifly with mine. I pressed the button again afew times and it sorted itself :s
i also have that problem, it got stuck. do anyone know how to disable the volume control buttons, i mean removing the shortcut?

htc diamond dead after flashing

please help i have flashing my htc diamond and after the screan was black , he not sycro, and i want to updte i have error 260, hard reset dont work, help
Try putting it into bootloader and flash another ROM.
Just press volume down + reset.
i have testing volum down and reset but he not work no syncro
dead is dead i tink the motherboard is hs , i don't say any other solution
any bady have a same problem , final solution jtag i tink
i'm in the same situation.... what do you did??
eny thing my htc is dead
So it won't even turn on? Can you see a black light?
Try removing the battery, put it in, hold down VOLUMEDOWN key (don't let go), and turn it on. Do you see a three-color screen?
What do you mean by "no syncro"? ActiveSync won't work with your device. But your computer maybe can still recognize it?
~codeslicer
same situation here, also after error code 260
doesn't react to anything, can't hard reset anymore...
suggestions?
or should i send it in for repair?
Kind regards
Pieter
I got from bro "cortez.i"
"(you get to bootloader mode by powering off the phone, then press-and-hold the down volume button and quickly tap your power button (do not press and hold the power button)"
good luck

HTC Salsa Power button not working

Hi All,
I have HTC salsa, few months its Power button stop working on gentle press and now its totaly gone.
And if I left my phn switched off after 20 24 hrs. its starts automatically..if I remove its battery and re insert it, phone starts automatically.
I go to service center but he said that button is connected to mother board thus whole mother board will be replaced and it will cost some 90 $.
So is there anyone who can help me or faced any such issue?
one more consiquence of this problem is that if my phone's gone in sleep mode then its ring become active and the only way to get the screen is either I have to call on ,y number or plug in the charger.
So is there any app which can disble that ring.
Phone is running on Original rom nothing special treatment is provided to it and I cant do anything on it as I dont have PC connectivity for that mobile.
Please help me.
Thanks
To All Moderators,
By mistake I post this thread at wrong place.
Kindly move or delete this post.
Sorry for inconvenience
use a program called button remapper, and select another button to be power on. rooted customs only this will work on
BigBearEvo said:
use a program called button remapper, and select another button to be power on. rooted customs only this will work on
Click to expand...
Click to collapse
I searched for it but I came to kno that if even I used button remapper..
It will work for luck\unlock the phone and even for restart and shutdown..
But we cant be able turn ON the mobile with it..
Can you plz confirm it form me..
That will be realy help full...
Thanks
arpanshukla17 said:
I searched for it but I came to kno that if even I used button remapper..
It will work for luck\unlock the phone and even for restart and shutdown..
But we cant be able turn ON the mobile with it..
Can you plz confirm it form me..
That will be realy help full...
Thanks
Click to expand...
Click to collapse
unknown sorry, never actually had to do that

[Q] Constant Black Screen, Need help.

I have a constant black screen on my HTC One Mini 2, havnt dont any updates or changes to the system files. It just all of a sudden stopped working, when I press the lock button and press near the bottom of the screen I can fell the vibrations from the lock screen. I cant reboot it as it wont turn off without getting past the lock screen. Can anyone suggest any help? Also could someone link the RUU as I cant find it anywhere, I have been searching for hours and I cant find it.
Moses148 said:
I have a constant black screen on my HTC One Mini 2, havnt dont any updates or changes to the system files. It just all of a sudden stopped working, when I press the lock button and press near the bottom of the screen I can fell the vibrations from the lock screen. I cant reboot it as it wont turn off without getting past the lock screen. Can anyone suggest any help? Also could someone link the RUU as I cant find it anywhere, I have been searching for hours and I cant find it.
Click to expand...
Click to collapse
1- by lock button do you mean power button?
2- volume down and power will reboot. (takes 10 seconds) Lot of people asked htc to fix this security issue but still exists
2- no RUU available yet only stock TWRPrecovery
note - sounds like you phone got hardware problems. if still in guarantee, send it to HTC
kativiti said:
1- by lock button do you mean power button?
2- volume down and power will reboot. (takes 10 seconds) Lot of people asked htc to fix this security issue but still exists
2- no RUU available yet only stock TWRPrecovery
note - sounds like you phone got hardware problems. if still in guarantee, send it to HTC
Click to expand...
Click to collapse
Thx for the reply, this is driving me mad.
1. I did mean power button, my bad.
2. Have tried the Volume down and power button, nothing happens. Pretty sure it doesn't even reboot.
3. Although a hardware issue is a likely cause, I have found that alot of people with HTC phones have had this issue and have fixed it with a factory reset (why I wanted the RUU, which is a bummer that there isn't one).
Moses148 said:
Thx for the reply, this is driving me mad.
1. I did mean power button, my bad.
2. Have tried the Volume down and power button, nothing happens. Pretty sure it doesn't even reboot.
3. Although a hardware issue is a likely cause, I have found that alot of people with HTC phones have had this issue and have fixed it with a factory reset (why I wanted the RUU, which is a bummer that there isn't one).
Click to expand...
Click to collapse
OK try this:
(you need htc drivers and adb/fastboot tools - extract to a folder and open command line)
in comand line type:
adb devices (if detected continue)
adb reboot (this will reboot your phone)
or
adb recovery (this will reboot into recovery mode where you can factory reset)
kativiti said:
OK try this:
adb devices (if detected continue)
adb reboot (this will reboot your phone)
or
adb recovery (this will reboot into recovery mode where you can factory reset)
Click to expand...
Click to collapse
The device is recognized when plugged in and by windows explorer, but the adb devices command does not list the device, any ideas? Also thx for the help so far.
Moses148 said:
The device is recognized when plugged in and by windows explorer, but the adb devices command does not list the device, any ideas? Also thx for the help so far.
Click to expand...
Click to collapse
make sure you have latest htc drivers installed. use htc sync to get them. check in device manager if Android Device>my HTC is listed
kativiti said:
make sure you have latest htc drivers installed. use htc sync to get them. check in device manager if Android Device>my HTC is listed
Click to expand...
Click to collapse
Device manager is picking up the device as HTC One mini 2, and it says the driver is up to date, but the adb still says there isnt a device connected.
Volume up + power button is the combination to make it reboot, not down...
gibihr said:
Volume up + power button is the combination to make it reboot, not down...
Click to expand...
Click to collapse
OMG that worked, thx for that. Everywhere was saying power button and volume down (not just kativiti). I feel like a moron. Thx you both.
Moses148 said:
OMG that worked, thx for that. Everywhere was saying power button and volume down (not just kativiti). I feel like a moron. Thx you both.
Click to expand...
Click to collapse
Glad you managed hope it fixes the problem.
I never actually read the message in phone when pressing vol- and power. It says:
"To restart your phone press vol+ and power for 10 seconds" LOL
HTC One mini 2 blank screen
kativiti said:
Glad you managed hope it fixes the problem.
I never actually read the message in phone when pressing vol- and power. It says:
"To restart your phone press vol+ and power for 10 seconds" LOL
Click to expand...
Click to collapse
Hi Guys,Anyone know how to fix the htc one mini 2 blank screen problem.My phone has been blank since 2 days back. I have tried the power+vol+ keys but its not working. I can hear the phone restart and i can receive calls and I hear notifications on my phone but i cant see anything...Please help the phone is only like 5 months
vic2305 said:
Hi Guys,Anyone know how to fix the htc one mini 2 blank screen problem.My phone has been blank since 2 days back. I have tried the power+vol+ keys but its not working. I can hear the phone restart and i can receive calls and I hear notifications on my phone but i cant see anything...Please help the phone is only like 5 months
Click to expand...
Click to collapse
Send back to HTC. you have one year warranty.
thanks mate! this save my life!
Screen still black
marriusf81 said:
thanks mate! this save my life!
Click to expand...
Click to collapse
Hi...what did you do to fix it.I cant take mine back cause i bought it while i was in another country and there is no htc store where i am...the phone is just sitting at home...I really dont know what to do.
vic2305 said:
Hi...what did you do to fix it.I cant take mine back cause i bought it while i was in another country and there is no htc store where i am...the phone is just sitting at home...I really dont know what to do.
Click to expand...
Click to collapse
Dont take to HTC store.
Contact HTC online they will take care of you.
Collect and deliver. If its Hardware fault its free. (in my experience)
Sorry mate for the late answer. Vol up + power button pressed together.

Categories

Resources