After I Root my Galaxy S i cant get a Device Name for Sygic? How can i UnRoot it or create a device name for my phone for Sygic! Thank You!
reflash to what every rom you have... thats it
where i can find the latest stock rom ?
Not to be rude but...
This is the Development section. Please ask questions in the General section
Related
Hi can someone explain how i can revert back to my original firmware which was on the phone before i flashed it with jpk , so will be able to use the official froyo upgrade when it is released , i have a samsung i9000 with froyo i9000xxjpk. thanks in advance !
1. WHATEVER the rom you currently have, it WON'T affect your upgrade to ANY other rom (e.g. official froyo)
2. you need to know what rom you HAD, before do the reverse to the "original".
3. reverse procedure is the SAME as upgrade, its just flash another rom.
4. WRONG section for this post.
thank you for your help , sorry i posted this in wrong section but which section shoiuld i have posted it in ?
zipolly said:
thank you for your help , sorry i posted this in wrong section but which section shoiuld i have posted it in ?
Click to expand...
Click to collapse
The Q&A section (which I've moved it to now for you). Please read the sticky post at the top of these sections titled "STOP!! Before you post read this NOW!!", which has guidelines for proper thread posting and placement.
As I own a Galaxy Tab with Android 2.2 I would like to change to Android 2.3.3
The Basband version in use is: P1000DXJJ2
Kernel version: 2.6.32.9 root(at)SE-S604 #1
Build number: FROYO.DXJK2
Now my question is: could I just manual upgrade to version 2.3.3 which I had downloaded, in total 4 files:
P1000XXJQ1_P1000XXJQ1_P1q000XXJPZ.zip
dbdata.zip
gt-p1000_mr_PIT.zip
ODIN3 v1.83.exe
Could someone please tell me it's ok to use that files or, if not, point me in the right direction.
Thank you so much for any answer.
This rom is for european galaxy tab, but I think you can flash it on an asian version of the tab. Look at the development section for this rom.
Sent from my GT-P1000 using XDA App
pcinfo1 said:
Now my question is: could I just manual upgrade to version 2.3.3 which I had downloaded, in total 4 files:
P1000XXJQ1_P1000XXJQ1_P1q000XXJPZ.zip
dbdata.zip
gt-p1000_mr_PIT.zip
Click to expand...
Click to collapse
Can I ask two questions...
(a) Where did you get the download from and (b) have you installed the ROM and how did it go?
Aspi914 said:
Can I ask two questions...
(a) Where did you get the download from and (b) have you installed the ROM and how did it go?
Click to expand...
Click to collapse
To your question:
a: androidtotal. com/manually-install-update-samsung-galaxy-tab-to-android-2.3.3-gingerbread/
b: I asked my question in the OP before I try to install!
I do NOT like to brick my Tab with an unsupported Rom! That's why I ask upfront the Rom could be used on my Asian Tab or not.
aibo said:
This rom is for european galaxy tab, but I think you can flash it on an asian version of the tab. Look at the development section for this rom.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Thanks for your reply.
Unfortunate, I couldn't post in the Dev section right now because of my post count.
As my Tab is an unlocked Tab with Quadband and 3G (900/1900/2100 MHz) I hope that everything will works with the Europe version, I just want to be sure not to brick the device!
pcinfo1 said:
Thanks for your reply.
Unfortunate, I couldn't post in the Dev section right now because of my post count.
Click to expand...
Click to collapse
You shouldn't have been posting in the dev section anyway, that is for posting of dev projects/reference.
TheATHEiST said:
You shouldn't have been posting in the dev section anyway, that is for posting of dev projects/reference.
Click to expand...
Click to collapse
And ask questions about development too, me think! Or am I wrong?
And that's what I doing: Asking Questions!
here: http://forum.xda-developers.com/showthread.php?t=1073854
the tutorial and video from here help me. am on asian galaxy tab. running with no glitches on GB.
http://www.thegalaxytabforum.com/in...gingerbread-p1000xxjq1-p1000xxjq1-p1000xxjpz/
Yes you can. Infact im from philippines. And my tab is korea. I already upgrade my tab using the one that you downloaded. It was a successful upgrade.
Sent from my Galaxy Tab Garlicbread 2.3.3 using XDA App
pcinfo1 said:
And ask questions about development too, me think! Or am I wrong?
And that's what I doing: Asking Questions!
Click to expand...
Click to collapse
No, you are wrong. We have a Q&A forum, try using some common sense. Do you honestly think that its sane to allow questions or other type of topics to be created in the dev section? It would just lead to a complete un-organized mess and browsing the dev section would be a pain in the arse.
http://forum.xda-developers.com/showthread.php?t=1047516
TheATHEiST said:
No, you are wrong. We have a Q&A forum, try using some common sense. Do you honestly think that its sane to allow questions or other type of topics to be created in the dev section? It would just lead to a complete un-organized mess and browsing the dev section would be a pain in the arse.
http://forum.xda-developers.com/showthread.php?t=1047516
Click to expand...
Click to collapse
First at all: The Q&A forum haven't gave an answer within a week or more! Do you really think that's OK?
Secondly: My question were for the Gingerbread Version (Overcome Beta) which is running in the Dev forum and therefore I really do believe that those forum were the right place for to ask questions about that specific version.
After NOT getting an answer in the Q&A forum, I done more researches and found the Samsung Stock Rom (NOT on this forum) and was asking my final question in the Samsung Galaxy Tab General forum.
My remark about the min. post count for to be able to post in the dev forum were just that: A REMARK.
Last but not least, this is a public forum and as long as I stay to the rules, I could post as I like and as it is allowed! There only the forum staff, means Admin's and Moderators who have the right to limit a action or posting ability of an 'normal' user and those will be done in case of an breach of the rules only.
I'm Administrator on one Board and Global Moderator on an other Board and believe me or not, I know what I'm talking about.
If you think that my post('s) are inappropriate, please feel free to report my post to the forum staff.
Have a nice day.
ryn888 said:
Yes you can. Infact im from philippines. And my tab is korea. I already upgrade my tab using the one that you downloaded. It was a successful upgrade.
Sent from my Galaxy Tab Garlicbread 2.3.3 using XDA App
Click to expand...
Click to collapse
And YES, it works!
I updated the last night from 2.2 t0 2.3.3 and everything is fine now. It's quite a bit of improvement compare to Froyo.
Thanks for the info.
Hey pcinfo1, I'm searching around the forum, we are on the same stock ROM.
I like to know if its ok for me to flash to Overcome ROM v3.1.0-KRATOS???
Thanks!
Ok to flash overcome rom ONLY if you update to stock gingerbread 1st. You need the gb bootloaders installed otherwise you will end up with your tab hanging on the samsung logo. Thankfully overcome has the safe stock gb rom v5 that has the gingerbread bootloaders. All you need to do is find the modem.bin file for your region/carrier and you're set.
Sent from my GT-P1000 using XDA App
Hii, thanks for the reply mate. how do i find modem.bin file for my region/carrier?
I'm from Singapore and it should be considered as Asian set right? Thanks!
pcinfo1 said:
First at all: The Q&A forum haven't gave an answer within a week or more! Do you really think that's OK?
Secondly: My question were for the Gingerbread Version (Overcome Beta) which is running in the Dev forum and therefore I really do believe that those forum were the right place for to ask questions about that specific version.
After NOT getting an answer in the Q&A forum, I done more researches and found the Samsung Stock Rom (NOT on this forum) and was asking my final question in the Samsung Galaxy Tab General forum.
Click to expand...
Click to collapse
The reason there are no answers given sometimes is because the questions are so weak, or have been asked and answered soo many times.
If you post a question that doesn't get answered within a day (not within 30 minutes like some people expect), rethink your question.
Posts that have "Hi guys, I'm new" or "Help, I've bricked my tab" for titles tend to get passed over.
Hi,
Got a galaxy note with baseband version N7000XXKK5 and kernel version of 2.6.35.7-N7000XXKK5-CL726566. I'm totally new with flashing ROM such as this on android and I'm just wondering if somebody could provide with the instructions and tools to get me started specifically for Rocket ROM?
I am a returning xda user from the good old times of WinMo on htc touch and htc diamond
Thanks!
first of all you need to get Root your device. If you are non rooted then go to first link of my signature. And remember
You need to post it in Q & A section or to Roket ROM Thread itself.
This is development section.
Yups. 1st u need to root your device. The easy method is CF root by Chainfire
Hi,
Rocket Rom installation is not different from any other Custom Rom one.
First thing you have to do is, sorry for this....., STUDING.
Note is a really expensive phone so, before modding it, take some time to understand what you are doing (I followed Note's forum for 1 month before rooting mine), becaouse with modding you can:
• lose your warranty
• brick(=destroy) your NOTE!! (this can 99% happen if you don't know what are you doing...).
Ok now let's start with real advice:
1) Start from here http://forum.xda-developers.com/showthread.php?t=1325369&highlight=efs (ORIGINAL EFS folder is ESSENTIAL for Samsung warranty)
2) Root your Note http://forum.xda-developers.com/showthread.php?t=1331784 instruction on the second POST
3) Go to Rocket Rom page and follow instruction http://forum.xda-developers.com/showthread.php?t=1380284 (Dev of the Rocket Rom eybee1970 stopped updating this fantastic Rom so , by now, don’t expect further update)
My last advice is READ READ READ and SEARCH in XDA forum, 99% of question you can imagine has just been asked.
XDA is a really great place to understand, but you have to put some effort into
BTW…welcome to the great community of NOTE’s Owner, probably the best Android Device.
Thank you guys for your replies and suggestions. Really appreciate it. These definitely give me a good starting point
Cheers
Thread moved
Questions belong in Q&A, not development.
Please tell me the links for working CWM and the corresponding CM builds for GALAXY S5380i ... Please Please Please. Need help here.
Need my friend's phone to come back to life.
kingsdeb said:
Please tell me the links for working CWM and the corresponding CM builds for GALAXY S5380i ... Please Please Please. Need help here.
Need my friend's phone to come back to life.
Click to expand...
Click to collapse
So hard to find a working recovery? Why you messing up this section? And do you blind that Q&A section is already available for a long time ago.
Simply, find CWM 6.0.5.3. Restore with ODIN with XXLK1 firmware(download anywhere) coz it will convert to /rfs. Install recovery, make clean wipe and install.
Next time, thinking back what rules saying to you and make a new thread in a right section.
Hello everyone, i'm noob in xda-developers and custom android roms in general. i've read some thread in here about making your own custom rom etc... So.. years ago i bought my first android phone, it was a local brand using msm8610 chipset. Now i already have newer phone, and my first phone is now obsolete. Now that i have a phone that i can play with, i want to understand more about making your own rom. while there's so much that i dont understand, here's what i think i know. To create a custom rom for your device, you at least have to compile your own kernel and make boot.img, and then combine those with some custom rom that you can find on the web.
Now what i want to know as a noob is this... Can we just extract the kernel from my phone's boot.img, then extract the device tree from that kernel, then find a phone with the same chipset(which in my case is msm8610), extract the kernel of that device and then replace the DTB with my device? can it? if it can, how do i put the dtb back to the other device's kernel? and if it can't, why can't it be done this way? i'm asking this questions because i find it hard to find the source kernel for my device since it's a local brand... i hope that masters in this forum can explain it to me in layman's term.... thank's in advance...
hello again... btw did you know the answer to my question about putting back DTB to the kernel.... i want to ask in Q&A section, but, since i'm a noob, i'm afraid that it will get me banned if i posted there...
prz111 said:
hello again... btw did you know the answer to my question about putting back DTB to the kernel.... i want to ask in Q&A section, but, since i'm a noob, i'm afraid that it will get me banned if i posted there...
Click to expand...
Click to collapse
Don't be afraid, go for it.
If you don't violate the rules you won't get banned.
Just make sure to post it into the relevant thread.
User699 said:
Don't be afraid, go for it.
If you don't violate the rules you won't get banned.
Just make sure to post it into the relevant thread.
Click to expand...
Click to collapse
thanks... i'll ask in the Q&A section about it...