Hiho,
I've been working on getting the panel to unblank faster, not stall to unblank and to not show distortions on unblank (which also happens sometimes).
Please report your experience on blanking/unblanking the panel using the given packages. If you are unsure which one to use, use the dualdie one!
For dualdie (most common) devices: here
For monodie (rare) devices: here
Please report your device (topa100, topa210,...).
If some lone Rhodium user comes by, don't hesitate to test if this breaks the known behaviour on your devices. (From the code, pretty nothing should work for rhods. Please confirm nothing is broken.)
Update: The code has been committed to gitorious. Fetch newer builds from the autobuild service. Thanks to everyone who tested!
Hi,
Kernel is booting fine on my topa100. The lights on the buttons light up immeadtly. Screen doesn't wake always fast. I normally wake up with power and menu button for unlock. This goes realy fast.
Regards,
Bart
bheremans said:
Hi,
Kernel is booting fine on my topa100. The lights on the buttons light up immeadtly. Screen doesn't wake always fast. I normally wake up with power and menu button for unlock. This goes realy fast.
Regards,
Bart
Click to expand...
Click to collapse
But the time from pressing power until the LCD is unblanked is seriously faster now compared to regular kernels, no?
Sent from my MSM using XDA App
TOPA160
boots fine, see this is new 28 package,
freaking, apocalyptic, incredible fast screen.
would almost never think about that fast.
thank you very much. all i need now is a better battery or power management and HW3D working.
I've got a monodie device, the zimage & modules seem to work fine for me but I don't notice any speed difference on unblanking. So I guess if it works well for dualdie devices we know that it won't upset those of us with monodie devices.
shavenyaknz said:
I've got a monodie device, the zimage & modules seem to work fine for me but I don't notice any speed difference on unblanking. So I guess if it works well for dualdie devices we know that it won't upset those of us with monodie devices.
Click to expand...
Click to collapse
Haha, just fooled myself. At least the last package for monodie devices which was posted in the dedicated thread already contained the panel fixes, so you won't really notice a difference. Be told that it took approximately 2 to 3 seconds to unblank before So just go on using the kernel posted here until the monodie issue has been solved.
mweirauch said:
At least the last package for monodie devices which was posted in the dedicated thread already contained the panel fixes, so you won't really notice a difference.
Click to expand...
Click to collapse
Ah, tricky. Thanks for looking out for us monodie guys.
For me (my TOPA200) it's different. Most times it's really fast, sometimes the screen left black and I must press home button a second time.
No other (new) problems at this time.
Greetings and thanks for your great work
shavenyaknz said:
Ah, tricky. Thanks for looking out for us monodie guys.
Click to expand...
Click to collapse
I still "owe" you guys a proper fix. Cotulla - one of the HD2 kernel devs - might need this for the HD2, too. So I see a chance we can find a way of getting the required changes/extensions into HaRET.
cheesy33 said:
For me (my TOPA200) it's different. Most times it's really fast, sometimes the screen left black and I must press home button a second time.
No other (new) problems at this time.
Greetings and thanks for your great work
Click to expand...
Click to collapse
Yap, when device is in idle sleep mode, it shortly wakes (red LED) and sleeps (green LED) immedeately. Only pressing home button helps. But If I recall correctly, that also happened with the old panel setup/init code, it just took longer to fail waking up the lcd panel. I wouldn't clarify this as a regression as it also happened before, just "behaved" a tad bit different due to the long panel waking times. Another issue to be sorted out later ...
Topa 100
Wow, it is awesome.
I never feel the screen wake up that fast before. However, the screen left black and I need to press home button a second time.
You did a very good work and keep it up.
Tested on my Topa100.
"monodie" version cannot create data.img and crashed, "dualdie" booted and now wakeup works much faster.
Thanks!
TOPA100
Dualdie works perfect and gives a much faster feeling!
Thanks for this update!
This dualdie package works fine on my topa100 device.
The screen tuens on incredibly fast, just like(or even faster than) what the WinMo does!
If I "actively" turn on and switch off the LCD, the LCD would react very fast (i.e what I have mentioned above).
However, if the device is standby for about 10sec or longer, usually, the LCD would not turn on. In this situation, i need to press the power again and the LCD turns on immediately.
Also, i found that, in this kernel, pressing the power key would have a higher chances to turn on the LCD than pressing the "end call" key.
Thanks for these positive replies peeps!
I also can observe that it won't power on when in "pm idle sleep mode". When holding end-key for a little bit longer it awakes. Using the home button immediately gets it out of sleep correctly.
I am not quite sure this is a regression or not, but I am of the opinion that this also happened with the old (slow) panel init code, just wasn't as present that much.
Will take a look.
I tried your package on my pure(topa210) and it worked great! Before it took almost 5 secs to unblank, now only 1 or 2 secs!
Very good job, the dualdie version works prety well, wakes the display very fast, but if i continuously lock then wake up few times it will stuck on the blank screen for some secs, then after works again.
monodie or dualdie?
I've got a T5353 TOPA100 but how do I know if I've got a dualdie or monodie device?
Edit: Is this fix ever going to end up in the main build?
stijnr said:
I've got a T5353 TOPA100 but how do I know if I've got a dualdie or monodie device?
Edit: Is this fix ever going to end up in the main build?
Click to expand...
Click to collapse
First try to dualdie version, if that doesn't work out, you got one of the more rare monodie devices.
The panel fix is going to end up in the kernel when I find the time committing it gitirious.org had some problems at the start of the weekend...
Related
I've been using Incubus26Jc's Froyo v. 12 and My Vogue has been freezing over and over all the time. Seems not to be app specific, and seems to happen when its charging and when its on battery.
Any chance I've got a setting wrong? My guess is that my phone is dieing. Any advice?
I've had this problem on the earlier versions, but now on release 12, I have only had 2 freezes... Sometimes you just have to let the phone sit. I guess it kinda gets overwhelmed and needs a little rest :/
Is my situation the same? I'm running SagaROM Froyo Ultralite [v1.2.1, 7/28/10] and every time the screen goes to sleep and goes into lock mode, it reboots. What can I do to fix this? Please & thank you!
deltagamer said:
I've had this problem on the earlier versions, but now on release 12, I have only had 2 freezes... Sometimes you just have to let the phone sit. I guess it kinda gets overwhelmed and needs a little rest :/
Click to expand...
Click to collapse
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now
evilclosetmonkeynate said:
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now
Click to expand...
Click to collapse
Try going back to RLS10.5 with the 15-07-2010 version of Zimage. That eliminated the freezes for me. And it seems a lot faster.
evilclosetmonkeynate said:
i have to agree my phone was doing this all day today, after using gps and apps heavy
rebooted a few times and let it sit for a while working much better now
Click to expand...
Click to collapse
Try going back to RLS10.5 with the 15-07-2010 version of Zimage. That eliminated the freezes for me. And it seems a lot faster.
Thanks @richardk3 ... I have the NBH, but I didn't save the 10.5 install file. Anyone have a link?
Update: Searching the forum didn't find it but a Google Search did: http://www.mediafire.com/?ond2tmmzolggtmm
If you search the main Froyo thread, incubus put up a link to the archive of recent releases.
I went back to RLS10.5 and the 7/15 zImage per richardk3's suggestion. At first I did notice less freezing and overall better performance. But then I made a long call (over 5 min) with BT headset and the phone became unresponsive. BT and the call were still working fine, but the phone was unresponsive and had to be reset at the end of the call.
This is pretty consistent across all builds in Eclair and Froyo. I've reached the point where I basically accept that this is always going to happen and I'll need to reboot. It's worth the trade-off, though, since this build is so amazing and Android is so much better than WinMo.
Johndixon, if you're running from nbh then you may need to clear the dalvik cache from the boot screen menu. Worked for me when the freezes came fast and furious.
jstrom23 said:
I went back to RLS10.5 and the 7/15 zImage per richardk3's suggestion. At first I did notice less freezing and overall better performance. But then I made a long call (over 5 min) with BT headset and the phone became unresponsive. BT and the call were still working fine, but the phone was unresponsive and had to be reset at the end of the call.
QUOTE]
I'm having the exact same problem... always becomes unresponsive at the end of the call when using Bluetooth. I've tried combinations of RLS10.5 and RLS12, and a couple of zImages.
Other than this, it's super fast and stable... But it would be great to figure out what is causing the freezing.
Click to expand...
Click to collapse
eugene2007;7515857
I'm having the exact same problem... always becomes unresponsive at the end of the call when using Bluetooth. I've tried combinations of RLS10.5 and RLS12 said:
I'm having the same problem without using Bluetooth.
Can you gather the debugging info that DZO needs, as described here:
http://208.100.42.21/showthread.php?t=712310&page=180
Click to expand...
Click to collapse
Sorry guys I won't retype everything twice now. Worked all the day to get this pushed out. Now I am kinda tired! So this is just a quick first post. I will update it later. The first SuperFroyo Release is available now!
As promised by you in the "Good News..."-Thread -< I need testers now!
Here is the link + download + instructions for the first release of SuperFroyo for X1:
Android SuperFroyo
reserved for my mama and papa...naaaah future updates!!
IM downloading it. I will report back as soon as posible.
THANKS. IM very excited
Good!!
I am waiting for about 4hours lol
I want to work camera this version
btw thxxxxx
P.s: Pardon my English TT
I am gonna Try It Tonight...... Thanks .. Neo.. And All Devlopers........ Cheers
Its faster than any previous version of android on X1 and more responsive.
its seems very stable.
When i enter SupSetup it crashes. I guess that is CyogenMod setup but it doesnt work.
First haret boot is long. But then its very fast. After i hit haret it enters android very fast.
Scrolling in file manager and menu gerneraly is faster. And phone wakes up very fast. Before i had to wait 0,5 second or 1 second to unlock phone...now its instantly up. Hope you understand me.
3d seems better. I dont know if 3dHW accelleration is enabled. Carom3d was running very slow on tremers21/8 like 1 frame per two second. And now with this its running like 3 frames per second. Improvement but 3d games are still unplayable.
Next problem its battery status. When im charging its showing CHARGING for few seconds then its instantly showing 100% wich is not true. Then when i unplug cable its showin 50% and droping to 40% like 1% every 2 seconds. I was like WTF. Its not showing the right value.
Sliding beetween screens seems a bit laggy.
Before on 21/8 tremers when someone calls me i have to wait 3-4 seconds before i could se who is calling. Now on this version its very fast.
On XPERIA X1 generaly the ONE button on top is used for turning screen on and of, and for turning phone off. In your android version that funcion you assined to bottom right button (Drop/Cancel Call Button).
even when i hold that button i cant enter POWER OFF button becouse it tuns off display just after showing POWEROFF option.
i will try to test battery life time.
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
denyboy said:
Its faster than any previous version of android on X1 and more responsive.
its seems very stable.
When i enter SupSetup it crashes. I guess that is CyogenMod setup but it doesnt work.
First haret boot is long. But then its very fast. After i hit haret it enters android very fast.
Scrolling in file manager and menu gerneraly is faster. And phone wakes up very fast. Before i had to wait 0,5 second or 1 second to unlock phone...now its instantly up. Hope you understand me.
3d seems better. I dont know if 3dHW accelleration is enabled. Carom3d was running very slow on tremers21/8 like 1 frame per two second. And now with this its running like 3 frames per second. Improvement but 3d games are still unplayable.
Next problem its battery status. When im charging its showing CHARGING for few seconds then its instantly showing 100% wich is not true. Then when i unplug cable its showin 50% and droping to 40% like 1% every 2 seconds. I was like WTF. Its not showing the right value.
Sliding beetween screens seems a bit laggy.
Before on 21/8 tremers when someone calls me i have to wait 3-4 seconds before i could se who is calling. Now on this version its very fast.
On XPERIA X1 generaly the ONE button on top is used for turning screen on and of, and for turning phone off. I your android version that funcion you assined to bottom right buttom (Drop/Cancel Call Button).
even when i hold that button i cant enter POWER OFF button becouse it tuns off display just after showing POWEROFF option.
Click to expand...
Click to collapse
As I wrote on my site SupSetup is not available atm. I removed apk! For me this build runs amazing compared to my HTC Diamond (also SuperFroyo so I have the direct comparation). It's really incredible also for me how fast the display wakes up! My Diamond needs sometimes up to 3secs or doesn't even wake up...
I also encountered the prob with powering off. But you maqy remap the keys. Another solution is to press AND hold down poweroff-button and then touch the display with left hand for reboot/poweroff. This works for me.
Nevertheles I am really confused how good it works. I also tested Neocore by pushing it! It gave me 18FP/s without overclocking. Don't know it exactly but how much do you get on Trem's build?
jkoljo said:
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
Click to expand...
Click to collapse
I know you propably followed everything but this is what i did.
Formated SDcard. Created 3.650 (not exactly) Fat32 partition and 350 Ext2 partition.
Copied everything on Fat32 partition with haret.exe been on root. From WM6.5 first i launched install.exe from npkinstall. After reboot i started haret.exe from root of SDcard.
That is all.
jkoljo said:
Kernel panic - not syncing, no init found.
What is wrong, I did everything according to instructions (I think )
Click to expand...
Click to collapse
You think Please try to start from scratch. Seems like you made a mistake somewhere. In most cases you didn't partition correctly. Try it out a few times. It will work cause this build for X1 is noob-friendly if you have partitioned correctly! 3 Steps:
* Partitioning
* Running install.exe within npkinstall-folder
* Running haret.exe from root
Maybe you can have a look at documentation-folder. It contains some jpegs to help you out...
And please how do i change the black notification bar to original white???
Yeah, thanks for help Neopeek and denyboy, I noticed that as I had followed the partition sizes in the youtube video, I had ended up with 580 meg ext2. I will format again to 350 meg ext2
We will see, I will post the results!
denyboy said:
And please how do i change the black notification bar to original white???
Click to expand...
Click to collapse
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
vatoloco said:
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
Click to expand...
Click to collapse
Thanks. By the way. Mass Storage dont work. That is nothing new.
jkoljo said:
Yeah, thanks for help Neopeek and denyboy, I noticed that as I had followed the partition sizes in the youtube video, I had ended up with 580 meg ext2. I will format again to 350 meg ext2
We will see, I will post the results!
Click to expand...
Click to collapse
Dont follow that complex tutorial. Just boot ubuntu or any other gnu/linux go to Gparted and delete all partitions then create new FAT32 and new Ext2 with adeqate size. That all.
Or use any other software for partitioning for Windows or GNU/Linux
denyboy said:
Thanks. By the way. Mass Storage dont work. That is nothing new.
Click to expand...
Click to collapse
The build is preconfigured for ADB in froyo.user.conf. I thought some of you guys may help in logging via ADB to fix some bugs and providing logs via adb / ddms
vatoloco said:
The build is preconfigured for ADB in froyo.user.conf. I thought some of you guys may help in logging via ADB to fix some bugs and providing logs via adb / ddms
Click to expand...
Click to collapse
I hope someone will help you finish this but im not expert. I guess tremere could assist you he did great work. You two combined should acomplish great things when it comes to Android on Xperia.
Ok, now it works! The Android just did not like my 580 meg ext2 partition
And phew, it is FAST!
The battery driver goes crazy sometimes.
By the way, you mentioned about overclocking in your post in the other forum, is it possible?
vatoloco said:
You can change it in settings. Move to spareparts blablabla. Somewhere you will find Notification colors. Adjust them and then reboot Android!
Click to expand...
Click to collapse
original notification bar has a textures. When i select simple colors like this it looks owfull. Any way to restore the default white one.
how is the battery life?
http://www.neopeek.com/en/forum/14-Android-ROMs/364-Xperia-X1FroyoRedux-PortCM6
check this neopeek testers need again....
Installing as I type! Can't wait the original kernel to get the battery related patches!
I am having a wired problem - after a while on standby, upon waking up the phone, it freezes. Clock doesn't advance and phone does not respond on buttons/slider. So I do a soft-reset after which in winmo I get a message sdcard is not formatted, do I want to format it. and indeed file system is damaged. And this happens for a second time in a row now! I havent had problems like that with other distributions, at least ones that require ext2 partition. Anyone have advice?
Sent from my Milestone using XDA App
well, i cant charge
So far, it's perfect. Two issues that need to be resolved before I use it permanently is the charging and the battery drain.
Getting really close!
So far, it's perfect. Two issues that need to be resolved before I use it permanently is the charging and the battery drain.
Getting really close!
Click to expand...
Click to collapse
Ok so far so good! BUT: Would you provide us a lil bit of more info!
Which kernel did you use? Included one (=21/8) or that from SuperFroyo??
vatoloco said:
Ok so far so good! BUT: Would you provide us a lil bit of more info!
Which kernel did you use? Included one (=21/8) or that from SuperFroyo??
Click to expand...
Click to collapse
Sorry, was in a bit of a rush
Working: Marketplace, WiFi, GPS, battery meter, sound, messaging, gmail app, browser, ( bluetooth, I think )
Not: Camera, charging, power management
Used: Only the included files, nothing more.
May anyone please test this kernel?
Test-Kernel
I am awaiting your feedback
Hey guys, my Galaxy S should arrive tomorrow.
@all Developers:
Thank you very much for the good work, keep it up
@the rest:
I wish you good luck, that you can enjoy android on your X1 as i will do it on my new phone.
Maybe i'll look back in here from time to time, to see the progress.
Best regards from germany
See ya!
report?
Total performance is smooth
My location , Wi-Fi, Market , Battery Meter , GMail, Sound, Music is working
other function. i didn't use it.
Overall performance is good, but Force Close dialog is too much show..... when i try to do anything. there's a delay (about 5~10sec?)
All of you guys should really post which kernel you are using. It will be very helpful for the developers!
I am downloading at the moment, will try the kernels and post the results
Original kernel + points about FroyoRedux:
- Charging works (I had it plugged when I launched Android, actually does increase WM battery percentage, too)
- Battery meter shows too much, but I think it will calibrate itself if I finish charging
- Speaker bug is there, headphone plug and unplug fixes that
- A bit faster than CyanogenMod6 with Tremere's kernel
- Nice theme
- Mass storage does not work (should I install a driver or something?)
- Sometimes stops responding to any other key than the top power button = home
- 3D does not work
- Sound and calling work fine, cannot adjust in-call volume (possibly due to the keys not working, but I had this problem with CM6+Trem too)
- Pretty much every app works, YOUTUBE TOO (lags a bit, but works)!
New testkernel:
- Phone reboots when first screen of android comes up
- I just replaced files, it crashed at lockscreen
- Ran a new installation, it crashed at black android system (title) -window
SuperFroyo kernel:
- Fastest one, menu scrolling is pretty nice with this kernel
- 3D does not work, Neocore crashes
- Sound works
- Youtube works, and lags less than with original kernel
- Charging does not work, battery meter shows what comes to it's mind
vatoloco said:
May anyone please test this kernel?
Test-Kernel
I am awaiting your feedback
Click to expand...
Click to collapse
Tried copy/paste of those two files straight into root of SD-card (can only guess as it's not written anywhere). Phone reboots as soon as it comes to PIN-code page. Tried to restart a couple of times but nope.
Tried the SuperFroyo-kernel as well. Much faster in comparison to kernel from tremere's build 21/8.
Else, nothing more to add other then lkoljo wrote.
Big thx!
tried this kernel
xperia-xdandroid-kernel-20100922
Sound didn't work??
I'm useing the test kernel now, and it booted up without any problems
Gonna test Battery life for 2 hours, then switch back to vm to see if it gives good result's
Did you use the test-kernel from scratch. I mean when first booting up? or did you try first included kernel then after booting up you replaced kernel? I ask this because it's just not clear for me: You say it works w/o hassle and others report that they can't even get into the Launcher or that they have a black screen. I am just confused now
I did first use Tremere's Kernel with your build, and then i just copied the test kernel start from vm and booted it up. It's fast and stable it seems, i did use Android in standby mode for one and half hour. Well i did look around in system meny and such tried calling it but no signal just vibrate wich i did turn on. Battery used in android is 20% from fully charged 100% Switch back to vm says 78% so the meter seems almost correct. Tried original charger but it didn't work, Then tried pc usb charging and it seems to work Gonna try Xdandroid's new kernel now released today. Will get back to you tomorrow
I have now tested the new Xdandroid kernel released 23/9/10 for one and half hour now, switched back to vm and guess what?
i had 100% when i started android, used it for one and a half hour and then i switched back to vm it had only used 9% battery
Thats the best result i ever had using android, so hey if only sound/ mic problem gets fixed then this would be great
Grab the new kernel from thier Xdandroid wiki
I have tested 21/09/2010 [Xperia X1][FroyoRedux-Port][CM6] with the latest kernel from xdandroid (23/9/10) and it works very well, stable and fast. And the battery is a big improvment!!
I also overclocked it to 640mhz and the UI is then superfast.
Keep up the good work
winkgw said:
I have tested 21/09/2010 [Xperia X1][FroyoRedux-Port][CM6] with the latest kernel from xdandroid (23/9/10) and it works very well, stable and fast. And the battery is a big improvment!!
I also overclocked it to 640mhz and the UI is then superfast.
Keep up the good work
Click to expand...
Click to collapse
you use zimage to?
FYI: In the next days there will be heavy updates regarding some of my builds. Fixed almost everything I could! Just trying out today some of the kernels released lately and then I think we will have a really really good CM6-Ports ready for all of you! Everything that's working in XDAndroid "Final" should then also work for us! So maybe I will call my builds "Pre-Final". Another thing that I should mention is that user ferlanero from xda-devs has today shipped over his X1 from Spain to Germany (my location). Once I receive it I will be going to try some NAND-related stuff!
X1 from user sequester will be my porting-device to test ports and latest nightlies from Cyanogen
X1 from user ferlanero will be my nand-test-device
Be prepared to get the proposed updates (see above) on this weekend. Again speical thanx to sequester and ferlanero for supporting me! This really motivates me in doing all this stuff!
Yes zimage to at lest i did
Hello folks.
I'll be posting an esy to use package for everyone who wants to try the lastest android builds for the xperia x1.
I'll also keep it updated to the latest releases.
Just unzip the archive to your sd-card root.
No need to enable wifi or bluetooth in win mo for any of the versions.
Have your phones plugged in during first boot !!!
Grab the 25.11 edition here , xdandroid.2 from here and sp3dev kernel version from here.
Sp3dev's kernel seems to be better.
Working: -wifi
-bluetooth
-gps
-marketplace
-3d acceleration - neocore 15.7 fps
-3g works (orange romania)
-phone doesn't overheat
-phone speacker works
-great battery life for sp3dev
Warning: The boot takes a million years and the system is abit slow in the first minutes.
Changes:
-new kernels from xdandroid
Well it seems the new versions from sp3dev is quite ready for day to day use.
Starting now I'll provide Android 2.0.1 versions too. I find them to run smoother and better on the xperia. Also I'm hopping for better battery life.
Same kernels as above, the same things work.
Grab the xdandroid kernel version from here , xdandroid.2 from here and sp3dev version from here.
And starting today im proving a Sense UI rom frm the HTC Hero.
A little warning they are even slower to boot so have patience and also boot logo is upside down.
Grab the xdandroid.2 kernel from here and sp3dev from here.
Note !!!! : Radio version seems to influence android quite abit. 1.14.25.55 seems to work the best. Please report your radio version and how android runs on it.
And on a further note I recomend this for dual booting. For more details go here.
Blimey I should organise my post better.
what about battery life?
Till now 3 hours uptime with mild use (3g on, some wifi and installing some applications and testing them) and battery is down to 98%. May be a bad battery reading or its actually having a good battery life, only time will tell. It running really cold compared to all the other builds i tryed which made my phone burn hot.
which kernel did you use?Thanks for one zip package
I've been using the latest kernel from here.
Nice release, have it running on my xperia right now.
Saw at the about screen its running froyo 2.2.1 although for some reason it won't connect to my wifi at home.
Nice release
i do have one question, how is the key mapping for the android? did a quick search but couldn't find an image that used to be here on the forums with the key mapping.
data connection not working for me.no 3g either.
New version is out. Probably better battery life.
3g does work but you need to configure your apn.
Regarding the key mapping I have no idea. I dislike the xperia's keyboard, never used it.
lgstoian said:
New version is out. Probably better battery life.
3g does work but you need to configure your apn.
Regarding the key mapping I have no idea. I dislike the xperia's keyboard, never used it.
Click to expand...
Click to collapse
unfortunatly 3g won't be possible since i use my sim in my Galaxy S so i hoped for wifi to be working. About the keymapping. i meant the buttons under the touchscreen, not the touchscreen .
The release is running smooth on my xperia
do i need to run the sp3dev kernel version from the root or can i put it on the same SD card in a directory?
where can we download the new version
neo 299 see the first post.It's called sp3dev.
As for button mapping:
-power button is used for sleep and power
-call buttons are for call
-ok button is for back
-xpanel button is for home
-and left action button is for menu
No you can only have one release on a sd card. And I do recommend the new one more.
lgstoian said:
neo 299 see the first post.It's called sp3dev.
As for button mapping:
-power button is used for sleep and power
-call buttons are for call
-ok button is for back
-xpanel button is for home
-and left action button is for menu
No you can only have one release on a sd card. And I do recommend the new one more.
Click to expand...
Click to collapse
and by new one you mean the sp3dev. okay, will put that one on the sd then
And thank you for the button mapping
Do you know how can i disable 3g so that i can use data connection.Otherwise data wont work for me on 3g.Thanks for sp3dev version upload.Much obliged
Settings > Wireless > Mobile networks > use only 2g networks
lgstoian said:
Grab the 1.11 edition
Click to expand...
Click to collapse
This looks sweet, thanks.
However, Megauploads gave error message :
"The file you are trying to access is temporarily unavailable."
Any chance you could upload it somewhere else as well ?
Thanks! HS
The sp3dev kernel version works fine, my X1 gets al bit warm but works. Tweetdeck works realy well, Foursquare will be tested tomorrow.
The only two problems I have till now are within the phone function. Kinda important...
1) I can't hear anyone and they can't hear me when calling.
2) And I don't have a clue how to add a ringtone.
Can someone help?
very good version of xdandroid.
fast and stable....
battery comsumption seems ideal??
but the main issue is no sound at all for me..
including ring tone, voice call...etc...
please help to fix~~otherwise, it is a really great build
Try using the other build. I think that one had working sound but battery wouldn't last so long.
And as for ringtones google a tutorial ).
I'm also having trouble with the sound.... no sound on calls, media, etc.... But when i test the ringtone there is sound...
Any ideas? Great build btw.....keep up the good work...
kuber said:
I'm also having trouble with the sound.... no sound on calls, media, etc.... But when i test the ringtone there is sound...
Any ideas? Great build btw.....keep up the good work...
Click to expand...
Click to collapse
I have not installed this version. But ill do it later today.
On other versions when i had no sound on calls i just played with volume buttons while recieving call and then it worked.
Hey!
My Girlfriend is using an Galaxy S Plus, and recently i tried to flash it with some of the Images posted here... but somehow, every Image has major issues with the lock screen... to me it seems that the device isn't waking up properly.
The screen looks a bit dim, and the touchscreen won't work at all... after 5-6x pushing the power button, the device sometimes wakes up again.
To me it seems that every image here has the same problem... or am i doing something wrong in the flashing process?
Please help!
Tho
Tho-kun said:
My Girlfriend is using an Galaxy S Plus, and recently i tried to flash it with some of the Images posted here... but somehow, every Image has major issues with the lock screen... to me it seems that the device isn't waking up properly.
The screen looks a bit dim, and the touchscreen won't work at all... after 5-6x pushing the power button, the device sometimes wakes up again.
Click to expand...
Click to collapse
I have read some people mentioning that it can be related to the CPU governor used - try to use another governor.
PS: I have had the same issue with CM9 builds and smartassv2 governor. Since I'm using CM10 I haven't had that issue anymore.