I lost my Gene after bad flash, its not waking up.
After many attempts finally i gave up & decided to sell it for parts.
Anybody interested is welcome.
Atleast i can help the community.
i am ready to buy the cabinet provided there are no scratches
i want the touch screen... how do i gt in touch wi u????
send me a ur mobile no..
i want your battery if its in a good condition.....pm me ur contact no.
i'm from delhi
Related
umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
im not sure of the price but im pretty sure there's instructions somewhere explaining how to open up the wizard and replace the screen. It sounds like all you'll need is a new touchscreen, which i thought was under $100. That is of course if you're willing to do it yourself.
Im sorry i cant help, but im going to bump this just so someone who does know can help you.
yea, i thought the same... on ebay there r touchscreens for cpl of bucks... but what if the problem isnt in touchscreen? could it be maybe that the whole LCD+touchscreen is dead? I have to say i can't see any bad pixel on lcd display, he is workign fine... but what if...
any suggestions? could it really be that just the touchscreen is dead?
uwashock said:
umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
Click to expand...
Click to collapse
My screen just start to disalign a couple a weeks ago...
I just hope this does not mean that i will loose it...
any luck uwashock?
duh? luck what? no, i still dont know what to do... i dont want to **** up ppc by myself when changing screen... i dont know wot to do...
crap..
repair shops
if ur in florida ( idk what part), try looking for a cingular repair shop, i know t-mobile has one for its phones and things like that, i think its somewhere in clearwater, i always see it advertised on those beepers and phones ads.
here are some links that I found
http://www.cellrepair.us/services_cell_phone _repair.html
http://www.cell-phone-repair.com/
good luck, i might be having the same issuse sood
and, of course, google is your friend
Hi Everyone
I Have a friend who has just recently bourght a sony ericsson w910i
the flick of the wrist to change a song phone...
he got it when it was brand new in shops
it has developed a problem...
after turning it on after 20seconds or less it restarts and just goes into a continus loop....
i know xda-developers work on windows based phones but i just wanted to see if xda could strech there maverloss tecnical wings of theres and see if we could get this fixed!
lets see if we could put a smile back on his face!
chears
Westie
This handset is less than a year old, why not just send it back for software upgrade?? As you are from the UK also, not many people do know this but all mobile phones now have a 24 month warranty (they dont tell you this to stop you from taking your phone back but this is EU law)
just found out this is a world wide problem is so bad that some operators who sold the phone are asking for there return!!
http://techdigest.tv/2007/11/orange_recalls.html
touch wood i dont think this has ever happeded to SE before but it has happened to nokia a couple of times!
glad we can get around theses problems!!
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
(Solved)
why would you flash a touch diamond rom when your device is a kaiser?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
Duhhhhh.....'cause he wanted to kill his device!
sherpa said:
Duhhhhh.....'cause he wanted to kill his device!
Click to expand...
Click to collapse
lol....................
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
Touch diamond isn't all that great. It's lyk a Nokia platform on a PDA, why'd u flash it to a kaiser anyway ?!
About the raw materials, you can easily get the main board (for cheep) through any cellphone spareparts shop online through google . As far as repair is concerned, its as easy as performing a hardware upgrade for your pc; un-plug--> plug. If you're still scared, you can google for a stp by stp instructions.
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
your not the only one with a confused life style
Not dead,just sleeping
_Alex_ said:
As for where to purchase parts, I'd normally tell you to go here: http://www.pocketpctechs.com/main~unit~HTC_TyTN_II-972~area~home.htm but they don't have motherboards.
Your best bet might be to buy something from eBay with a cracked screen, because the motherboard, cpu & chipset is usually the most expensive part, and if you fry that it's usually easier to just buy new...
Hope this helps!
Click to expand...
Click to collapse
Thankx Alex.
I knew that wise words and advice would come out of the inner you.
I went to Mike Channon Home Page and left a message there,im still waiting for a reply.
I will go get the Device from the repair shop tomorrow. Ididnt accepted the price.
I will try and fix it myself,as i have the hability to fix Electronic things as PCs,Laptops,Mobiles etc,thank GOD.
Im low on economic status,but i will try Ebay my friend.
First Kitchen i used was the one with all your OEM Packages. So i love your work.
Hope you keep up in the good path of life .
For some of the others, should ignore any inconscient reply.
Of course i didn wanted to kill my Device. I just cooked HTC Touch Diamond ROM in a Kaiser Kitchen,added some Apps from the ROM i cooked based on C. Stu ROM to make it more colorfull,more alive to our eyes. But it went wrong,and if Man doesnt commited mistakes,so there wouldnt be positive results. Test we need. Mistakes have to occur in order to get better things.
People in Ethiopia have a more confused life than me. Im not an egocentric person, but cool .
I always learned things the hard way .
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
The only thing I can say you:
Great Avatar......
There is always a Solution
raccna said:
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
Click to expand...
Click to collapse
Im sorry for what append to you device. It doesnt make us feel good.
What did realy append ?
What part do you need ?
I have the solution for that. If you need a new Mainboard i can get it for you.
I dont make crazy prices. Probably a new device for the price of a Mainboard,thats what ive done,but im searching for a Mainboard supplier thought .
If you want to know more PM me.
Hi Thesire
thesire said:
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
Click to expand...
Click to collapse
Nope,i didnt straight flashed a Diamond Rom.
I knew i had to cook it. But forgot that i had to Port XIP and probably SYS from a Kaiser ROM to the Diamond one, or the reverse.
Im still on the learning process. But as you must know,Time is the Master.
And learning and take actions till they come correct its a bit time consuming. And i dont have much time these days.
I learned the hard way. I believe thats one thing that will never appen again .
Im waiting for my new Kaiser to arrive. Couldnt find a Mainboard supplier yet.
But i can get Kaisers for less then the price they asked me in the repair shop.
Friends, accidentally my tough screen got broken as result tough is not working , need help what i do, buy a new phone or replace the tough screen . i supposed same thing happened with aben too. need your advices from where i can get replace the tough screen and how much it would cost me ? or better solution ... if anyone want to buy my mobile i am ready sell it are all working expect tough ..
Check at ebay, a kit for change the screen. You can do it youself.. probably.
# My dog is my avatar.
Hi all just wanted to know if anyone has heard of this happening before. I got the XZ on the day of release and yesterday when I took it off charge i noticed a crack in the LCD. The phone has no physical damage whatsoever, no cracked glass or chip or anything, its in new condition. I'm particularly careful with my phone and do not recall it ever being dropped or misused. Any advice?
Sorry i am unallowed to post a link so i have attached a photo
tinypic.com/view.php?pic=2a9v2w7&s=6
Thanks
Never heard of an cracked LCD on the XZ ? but mine and some other people having a spontaneously cracked glass. Als got the XZ on the day of release (Netherlands) So welcome to the club. Feel sorry for you too. Lets get united to get our point at SONY.
facebook - XperiaZScreenIssueCommunity - hope this helps ones there are a lot of participants evolved to make a statement.
mine just cracked now , just like that very wierd
and at the same place actually , gonna take it to service center tomorrow hope they dont charge a fortune for it..
just returning from service center defnitely not happy , for a small crack caused by heat they are saying I need to pay 650$ to replace screen , very shocking and unreasonable. I have escalated to the SONY customer support and they should contact me back today or monday.. guys anyone else had this problem ?
anirudhks said:
just returning from service center defnitely not happy , for a small crack caused by heat they are saying I need to pay 650$ to replace screen , very shocking and unreasonable. I have escalated to the SONY customer support and they should contact me back today or monday.. guys anyone else had this problem ?
Click to expand...
Click to collapse
Took 3 weeks but Sony did fix it, i mentioned several times the phone was subject to no physical damage, tbh i didnt have to put up much of a fight it just took a lifetime to get my phone back. Its like brand new again.
Hope you get yours sorted.
xperiaHB said:
Took 3 weeks but Sony did fix it, i mentioned several times the phone was subject to no physical damage, tbh i didnt have to put up much of a fight it just took a lifetime to get my phone back. Its like brand new again.
Hope you get yours sorted.
Click to expand...
Click to collapse
thanks buddy thats defnitely reassuring my belif in sony hope they do it to me as well.... will keep you posted