Thanks to Adrynalyne for the kernel and Docmon for the support
Download the following file that matches your current ROM (All have been BDVD enabled):
Sense Based ROM: http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_sense.zip
CyanogenMod6: http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_cm6.zip
Ruby: http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_ruby.zip
Prerequisites: Must have PS3 version 3.41 phat or slim. Must be rooted. If you are not, use unrevoked here: http://unrevoked.com/rootwiki/doku.php/public/unrevoked3
Instructions:
1.) Place downloaded zip file from above on SD card
2.) Make Nandroid backup (just in case)
3.) install zip through recovery
4.) reboot phone
5.) Step 5 is only necessary if you are running CM6 or Ruby.
5a.) Download terminal emulator app from market and install
5b.) Open terminal emulator and issue the following commands
su
insmod /system/lib/modules/psfreedom.ko
6.) plug in cable from PS3 to Incredible
7.) Turn off power to PS3 by unplugging power cable if you have a slim or by flipping the switch if you have a phat model then reconnect/toggle back on
8.) Press the power button immediately followed by the eject button on the PS3.
9.) You may now unplug your phone from the PS3 as it is no longer necessary.
10.) You can now flash your kernel of choice back onto your phone to "disable" this mod. Or you can recover your nandroid backup.
Now you should have two new menu options under games on the dashboard. You can use these to install programs such as backup manager or other homebrew.
Enjoy!
Source:
http://adrynalyne.us/files/kernels/psfreedom/source/
Ruby kernel:
(Needs testing)
http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_ruby.zip
CM6 kernel:
(Needs testing, may require module loading via insmod)
http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_cm6.zip
Awesome, thanks for the instructions! Will try it out later tonight or tomorrow.
One question, can anyone explain in layman's terms what the difference between these is:
payload_dev_bdemu.bin : This is the PSGroove payload which adds Poke/Peek system calls, with BD-Emu support
payload_bdemu.bin : This is the standard payload with BD-Emu support (which allows to play backups)
Nice, just tried the Droid port on my wife's phone last night. Gonna try this on my Dinc tonight.
Cant wait to try this!!! My Teensy is on backorder so this is a perfect stand-in.
Just checked my PS3 and it's still on ver 3.30 so I may have to try this out on Ruby!!!
jermaine151 said:
Just checked my PS3 and it's still on ver 3.30 so I may have to try this out on Ruby!!!
Click to expand...
Click to collapse
You can download the 3.41 update and apply it using Sony's directions for applying updates via a flash drive. Then you can take advantage of this exploit.
shabubu said:
Awesome, thanks for the instructions! Will try it out later tonight or tomorrow.
One question, can anyone explain in layman's terms what the difference between these is:
payload_dev_bdemu.bin : This is the PSGroove payload which adds Poke/Peek system calls, with BD-Emu support
payload_bdemu.bin : This is the standard payload with BD-Emu support (which allows to play backups)
Click to expand...
Click to collapse
The difference is only noticable if you are a dev and looking at peeking into the kernel. If you are just wanting to use it to play backups or homebrew, either will work.
Confirmed working on Virtuous 2.6. Backup manager and FTP server installed and setup. FTPing backups to the PS3 as I type.
does this work on my Xbox360?
zeke1988 said:
does this work on my Xbox360?
Click to expand...
Click to collapse
You have got to be kidding...
enomele said:
You have got to be kidding...
Click to expand...
Click to collapse
Haha I'm sure he/she is.
Confirmed working on Ruby, using Backup Manager to backup MAG now. Awesome job on this Adrynalyne!
Worked wonderfully on Virtuous 2.6
Thanks again!
bhazard451 said:
Confirmed working on Ruby, using Backup Manager to backup MAG now. Awesome job on this Adrynalyne!
Click to expand...
Click to collapse
Glad to hear, and thanks
adrynalyne said:
Glad to hear, and thanks [/QU
Enjoy yourself some beer! I recommend the Dogfish Head *****es Brew, the donation should cover it.
Click to expand...
Click to collapse
adrynalyne said:
Ruby kernel:
CM6 kernel:
(Needs testing, may require module loading via insmod)
http://adrynalyne.us/files/kernels/psfreedom/bdvd/psfreedom_bdvd_inc_cm6.zip
Click to expand...
Click to collapse
I tried applying to CM6 nightly build 09-08 and it gave me an error in CW about signature. Also what does it mean by it "require module loading via insmod". THank You.
htchot said:
I tried applying to CM6 nightly build 09-08 and it gave me an error in CW about signature. Also what does it mean by it "require module loading via insmod". THank You.
Click to expand...
Click to collapse
Well, before the psfreedom.ko file was autoloaded at boot time, you had to manually go into a terminal emulator and su then type insmod /system/modules/psfreedom.ko I think that was the path. If you go to the first post and look at the old thread we were in, you can search in that and find the exact path.
rulevoid said:
Well, before the psfreedom.ko file was autoloaded at boot time, you had to manually go into a terminal emulator and su then type insmod /system/modules/psfreedom.ko I think that was the path. If you go to the first post and look at the old thread we were in, you can search in that and find the exact path.
Click to expand...
Click to collapse
Thank you for the reply. So how to I apply this kernal for CM6? I get a signature verification error when I tried to apply it in CW. Thank YOu.
Related
***MOD EDIT***
THIS ROM ONLY WORKS ON 4.1.26. Please consider another ROM unless you know what you are doing.
History & IntroThe first version was done with 3 different batch files, it ended up being very hacky and even ended up bricking one phone because the cleanup script didn't properly work.
I have rebuilt it from the ground up as a shell script. The initial temp root and file push is done with a batch file, it then fires off the install script on the phone which reports back to the batch with helpful info about what it is doing and what to expect from the phone as it goes. You no longer have to accept any superuser requests either.
The new script has been used on tons of phones now, everything executed exactly as I expected it to. I really didn't want to post this until we had a stock firmware to restore to, after the first release I have been worried about you guys bricking your devices, but what the hell, here it is anyways.
Come chat with us!FeaturesWorks for rooted and non-rooted devices
Deodexed
Reboot Option
Reboot to Recovery option
Ad Blocking
Removed power options headerChangelogAdeo v0.2: (3/9/2011)
Added Unknown Sources checkbox
Added Preferred install location (internal, sdcard, let system decide)Adeo v0.1: (2/28/2011)
Reboot to Recovery option
Ad Blocking
Only remove app/framework Dalvik-Cache (fixes /data app issues)
Removed power options headerFour simple rulesDo NOT do a factory reset if something goes wrong(soft brick), you will lose adb access and have a pretty brick
Do NOT do this if you are not familiar with ADB, if you softbrick you need to use adb to fix it
DO NOT PULL THE BATTERY, EVER WHILE INSTALLING
BE PATIENTHow to Install
Read the four rules above
Read the four rules above, again
Read the four rules above, again, one more time to make sure you've got it
Download the installer (AdeoInstallerv0.1.7z, AdeoUpdaterv0.2.7z)
Hook up your phone via usb with ADB enabled
run INSTALL.bat from the unzipped files
sit back, relax, wait until it reboots (can take upto 5min, be patient!!)
Read the disclaimer below
Enjoy!
DisclaimerIf you brick your device, I cannot be held responsible. Simply restore with the stock SBF to get you phone working again.Video Walkthru
Nice! First basic rom How would someone restore back to stop if you cant do a factory reset? I know on the captivate I had a nice Odin flash to do that.
Thanks
A custom ROM?
I'm going to have to buy an Atrix!
EDIT: Bought it!
EDIT2: And Adeo'd it. All UI lag is gone! This is awesome!
I am running this in my Atrix now - I believe my phone was the 4th phone to have this install perfectly on with no issues. Designgears, you are the man, once again! Thank you for this!
PM sent DG. I cheated an caught link a few minutes early and wanted say thanks! This is running great with no issues and I'm loving the reboot option...
Installed on mine, worked flawlessly. Thanks!
connexion2005 said:
PM sent DG. I cheated an caught link a few minutes early and wanted say thanks! This is running great with no issues and I'm loving the reboot option...
Click to expand...
Click to collapse
Haha, I understand your PM now... you got my file before I posted this.
psufan5 said:
Nice! First basic rom How would someone restore back to stop if you cant do a factory reset? I know on the captivate I had a nice Odin flash to do that.
Thanks
Click to expand...
Click to collapse
the factory reset is only if you brick.
There is no easy way to get back to stock, I will make a thing just like this installer to do that, actually its done, testing it
designgears said:
Haha, I understand your PM now... you got my file before I posted this.
the factory reset is only if you brick.
Click to expand...
Click to collapse
So if all else fails, the factory reset will bring it back to out of the box shape? Just concerned because Im still debating if I want to keep the phone before my 30 days is up etc. Id like to return it as stock obviously, but I also need to test out custom mods before my decision.
Thanks man.
I am curious, what changes were made for the reboot mod?
Also, thanks for the rom!
psufan5 said:
so if all else fails, the factory reset will bring it back to out of the box shape? Just concerned because im still debating if i want to keep the phone before my 30 days is up etc. Id like to return it as stock obviously, but i also need to test out custom mods before my decision.
Thanks man.
Click to expand...
Click to collapse
no no no, do not factory reset if it bricks!!! Read the op!!!!
shawnbuck said:
I am curious, what changes were made for the reboot mod?
Also, thanks for the rom!
Click to expand...
Click to collapse
smali edits in the framework.jar, android.policy.jar and added an image and sting to framework-res.apk
I saw the no factory reset posts lol... I was just curious what can be done to return the phone back to stock once this is all done with.
Thanks.
psufan5 said:
I saw the no factory reset posts lol... I was just curious what can be done to return the phone back to stock once this is all done with.
Thanks.
Click to expand...
Click to collapse
I designed this script to handle payloads, just need to package up one with a new payload with stock files and upload it.
Installed... Removed Laggyness i was getting with blur UI.
as to refering to the blur UI....
this is my second Atrix.. had to bring my first one back because when i was on tier 3 support the other night they fried the sim card reader with an update which was killing data signal to my phone... that phone had no laggyness whats so ever at all. I got this one today out of the box was having laggyness and slow response to key presses.. this fixed that as of so far.
designgears said:
smali edits in the framework.jar, android.policy.jar and added an image and sting to framework-res.apk
Click to expand...
Click to collapse
Nice, I will give this shot. Although I am already running DeOdexed already but I figured may be you got it running better than mine
I am also going to start editing small things like animations. No sense oh having all this power without some eye candy
Hello designgears,
Did you re-signed the apks? If so, could you share the key files you used? The reason I ask for it, it's because I am playing around with the /system/app apks and was getting errors like:
"Package com.motorola.blur.home has no signatures that match those in shared user"
Awesome job, btw!
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
uskr said:
Hello designgears,
Did you re-signed the apks? If so, could you share the key files you used? The reason I ask for it, it's because I am playing around with the /system/app apks and was getting errors like:
"Package com.motorola.blur.home has no signatures that match those in shared user"
Awesome job, btw!
Click to expand...
Click to collapse
Not sure, I didn't get an errors like that.
airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Try a usb port on the back of your PC
airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Download ADB Wireless from the Market. It'll help solve that one for you.
airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Install the Android SDK
install the MOTO drivers it will also install the moto adb drivers with it.
Install the ADB function drivers into the SDK/tools folder
run...cd to the sdk/tools folder... run... adb devices
should show the device is up which means ADB is enabled
BACKTOP v0.00001
Click to expand...
Click to collapse
Alright, so this is a guide to finally get the backtrack 5 software running inside of webtop. It uses chroot and xterm to allow full access to the software contained within the backtrack 5 arm image.
Prerequisites:
CWM Installed:
For all version: http://forum.xda-developers.com/showthread.php?t=1138541
WebTopMOD installed:
For 2.3.4 go here: http://forum.xda-developers.com/showthread.php?t=1169457
For 1.8.3 go here: http://forum.xda-developers.com/showthread.php?t=1093790
You do not need to download the Debian disk image. Will we be using the backtrack disk image instead.
BusyBox Installed in /system/bin:
Downloaded "BusyBox Installer" from the app store.
BE SURE TO INSTALL IN /SYSTEM/BIN!
Click to expand...
Click to collapse
The Goods:
BackTop.zip:
Download and un-zip the attached files into /sdcard/bt
BackTop.zip
BackTrack 5 ARM Image:
PART 1 : Download Link : http://bit.ly/p1BT5
PART 2 : Download Link : http://bit.ly/BT5p2
PART 3 : Download Link : http://bit.ly/BT5p3
These download links are from the xperia backtrack project and where I took inspiration to get it working in webtop. After using 7z to unarchive just place bt.img in the /sdcard/bt folder. The archives other contents can be safely ignored.
Click to expand...
Click to collapse
What you should have by now:
WebTOPMOD for Atrix.
BusyBox Installed in /system/bin.
Downloaded scripts placed in the /sdcard/bt folder.
Downloaded bt.img placed in the /sdcard/bt folder.
Click to expand...
Click to collapse
Give it a go:
Step 0: Connect the phone to display/lapdock. Run webtop and wait for it to boot.
Step 1: Open LXTerminal from the dock and type "cd /sdcard/bt"
Step 2: To run BackTop type "sudo bash backtop"
You should be presented with a white xterm screen. You can now use all the utilities built into backtrack 5 with ease. You can even run the gnome desktop environment! (More on that bellow)
Click to expand...
Click to collapse
Running Gnome:
You first need to kill off all the webtop crap do this by typing the following in xterm.
"ps ax|grep awn|awk '{print $1}'|xargs kill"
"ps ax|grep panel|awk '{print $1}'|xargs kill"
Then start gnome by typing "gnome-session" in xterm.
Click to expand...
Click to collapse
Accessing sdcards:
You'll need to make two directories inside of backtrack /sdcard and /sdcard-ext to do this type:
"sudo mkdir /sdcard"
"sudo mkdir /sdcard-etc"
Once you've done this simply reboot your phone and restart BackTop.
Click to expand...
Click to collapse
Known issues:
ettercap causes network connectivity inside of webtop to fail.
If something does go terribly wrong you can always force quit backtop with the following command:
"sudo bash /sdcard/bt/forcekillbt"
Click to expand...
Click to collapse
Cool stuff, I'll definitely check this out. Moved to development.
mate I don't have webtop but as a network engineer I'm giving this a big thumbs up, super cool to have a pen testing suite in your phone!!!
reserved #10Chars
It might just be me but do your links work? Specifically the http://bit/ly ....etc. thanks
Sent from my MB860 using XDA App
edit: had a smart attck and everything is tip top...well done sir...thx!!
that is the most metal thing ever
I'd prefer it actually dual boot on my phone for hac..I mean testing on the go xD
What will this one do that the others don't?
Cheers
pederb said:
What will this one do that the others don't?
Cheers
Click to expand...
Click to collapse
If you don't know what BackTrack is then you don't need it.
pederb said:
What will this one do that the others don't?
Cheers
Click to expand...
Click to collapse
its a pen testing Linux suit. its essentially Linux loaded up with hacking tools meant for testing networks to prevent hacking or "penetration". hack your own network. discover the vulnerabilities. and patch them. - to put it simply
This is amazing. Thanks.
7z issue with the bt.7z
Hum... I might be doing something wrong but I am not able to uncompress the 3 volumes posted in the links... I was able to download them all but the only one who actually I can uncompress is the first one and it generate a file bt.7z that I am also unable to uncompress... I am getting the following msg when I try to 7unzip them:
"cannot open file 'x:\xx\xx\bt.7z.002' as archive"
Should I join them all into one then use 7zip?
Forget it I just found it out by myself... is using a program to join them all into one then Unzip it.
My dream come true .............. i assume that we can run kismet and metasploit framework ?!
What kernel and rom were you able to make this run well with as i am having really bad reboots after i undock the phone from the lapdock as i am running faux123 kernel and cherry crust v3.
webtop when connected to hdmi not doing anything...
I was trying to use this backtrack distro on my AT&T Atrix and I must admit that I am a kind of noob on this ... I wasn't seeing big advantage until now that we have bt to use instead of the stock version...
I have no Lapdock so I am using Ronaldo_9 CWM version to run Webtop on HDMI in my GB 2.3.4 ( 4.5.91 from Kenneth Penn ). It was working til I followed these instructions ...
Well a little bit of what I did:
1- Downloaded the WebTopMOD from Joe Ferreira v2 to install with CWM.
2- Got also BusyBox installed through the BusyBox Installer over my /system/bin
3- Downloaed (even knowing it's not needed) the Debian disk from Joe Ferreira link (to install webtopmod).
4- Downloaded the BlackTrack 5 image from the links on the first post
5- Downloaded the BackTop.zip from the first post
6- Created the /sdcard/bt folder and put only the bt.img and forcekillbt and backtop files from Backtop.zip file onto it...
7- Plugged in my HDMI cable over my tv (yes I have no lapdock)
8- The Webtop option pop's up and when I selected it.....
Nothing happened... not even an error msg or stuff... the only thing still working is EC... but webtop none.... Does anyone of you have any clue or hint of what can I do about it?
EDIT: Got it working... it was because of the broken V2 WebtopMOD so I flashed the V1 and everything went fine.... Thank you all for not helping it made me a better researcher
I think I just wet myself I've been waiting for someone to come up with this since they started the ARM archticture and ported it to the XOOM tablet
Sent from my MB860 using XDA Premium App
The built in wifi doesn't support packet injection does it?
baumerman said:
The built in wifi doesn't support packet injection does it?
Click to expand...
Click to collapse
It doesnt....
Sent from my MB860 using XDA App
BCM4329 supports Promiscuous Mode and Multiple Monitor mode.
It supports Packet Injection, too.
The WiFi module needs to be modified for enabling these things... I'm currently working on GenTop, but after finishing that work I can take a look at it and see if I'm skilled enough to enable it on the driver.
kholk said:
BCM4329 supports Promiscuous Mode and Multiple Monitor mode.
It supports Packet Injection, too.
The WiFi module needs to be modified for enabling these things... I'm currently working on GenTop, but after finishing that work I can take a look at it and see if I'm skilled enough to enable it on the driver.
Click to expand...
Click to collapse
That would be awesome... just amazing how u dealing with a lot of stuffs simultaneously ....... tyvm for visiting this thread its almost dead...
Doing a simple (means not a complex one) research at Google it seens that there's no much of Monitor mode for android cell phones so far... not sure why if nobody cares or if it's not possible... but u got skill enough to give the last word
Hope to hear something soon...
I wish there was more development for this, and +1 for packet injection
gzrecoil said:
I wish there was more development for this, and +1 for packet injection
Click to expand...
Click to collapse
There is monitor mode for iPhone and itouch... not sure the reason why not for android :-(
Sent from my MB860 using XDA App
Thanks to Trekfan422991 for cluing me in on the Optimus 3D recovery.
Working:
Nandroid
ADB (after special driver install, need to tweak recovery for it to work with normal drivers)
Mounting USB to computer
Flashing zip files
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
I am in the process of making a recovery specifically for our device, it is mostly done and will be posted here when it is ready!
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
If you don't understand something in that list, DO A SEARCH AND LEARN, don't clutter the thread with crap!
Lets get started!
Lets start by getting the recovery.img file on the phone. Open up a cmd prompt and type:
Code:
adb push recovery.img /data
The rest of this will be done on the phone shell. In the cmd prompt type:
Code:
adb shell
We will need to have su access, In the cmd prompt type:
(If you haven't allowed shell su in SuperUser now would be a good time to accept the root request on the phone.)
Code:
su
Now we are going to backup your current recovery to your sdcard. In the cmd prompt type:
(make sure your sdcard is not mounted to your computer)
Code:
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
After that is done we are going to flash ClockWorkMod Recovery! In the cmd prompt type:
Code:
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
Congrats! You now have ClockWorkMod Recovery! In the cmd prompt type:
(each line is single command)
Code:
rm /data/recovery.img
reboot
How to enable ADB access: (only if it's not working already)
Download and install: (unzip and install the 2 exe files)
http://www.mediafire.com/?j5m1plnvzb8r0zc
While booted into ClockWorkMod Recovery, go into your device manager, you should see an "LGE Android Composite Device" with a yellow triangle on it.
right click on it, update driver software...
select browse my computer for driver software
select let me pick from a list of device drivers on my computer
click the "Have Disk" button
click the "browse" button
browse to;
for 64bit:
C:\Program Files (x86)\LG Electronics\LG Android Driver\64BitADB
for 32bit:
C:\Program Files\LG Electronics\LG Android Driver
and select lgandadb.inf
click "ok"
From that list select "Android Sooner Single ADB Interface"
click "next"
click "yes" on the popup
Click to expand...
Click to collapse
Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose. Good thing I am having issues with permissions with this didn't notice the SD Card Mounting issue till just now. That I can't deal with atm.
malickie said:
Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose.
Click to expand...
Click to collapse
I found a few modes, but no drivers yet so I don't know what they are. Even if we break stuff the kernel and recovery are separate, so technically we should always be albe to get back into recovery to fix stuff.
thankyou DG for getting this started..
so now with my clockworkmod i just made a backup of stock rom... if i say change the framework and I get boot loop.. will this clockwork mod be able to restore the original rom without any problems???
tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...
Trekfan422991 said:
tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...
Click to expand...
Click to collapse
I got mixed up as to what partition to flash, you just flashed a recovery image over the kernel... its ok tho.
follow my instructions to the su part, then do this.
// this will restore the kernel
dd if=/sdcard/mmcblk0p5.backup of=/dev/block/mmcblk0p5 bs=4096
// this will backup recovery
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
// this will flash cwm
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
OP is fixed!
edit--
and you have no adb access, this is going to get interesting!
haha... i shoulda noticed
____
LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha
Trekfan422991 said:
LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha
Click to expand...
Click to collapse
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.
47r0n1n said:
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.
Click to expand...
Click to collapse
sorry just side note:
how you liking your thrill compared to the evo 3d???
designgears said:
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
Click to expand...
Click to collapse
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?
Komodo Rogue said:
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?
Click to expand...
Click to collapse
I took it down for now, working on some issues.
Woohoo, got Trekfan422991 all fixed!
its true... i tested out my framework mod and it works great!!! look sway better then stock!!!
designgears said:
I took it down for now, working on some issues.
Click to expand...
Click to collapse
Ah, gotcha. I thought I was going crazy Thanks!
Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!
designgears said:
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
Click to expand...
Click to collapse
After CWM is installed and working on our device, would it be safe to fix permission in "ROM Manager," or does that just fix permissions through whichever recovery is currently installed?
I'm guessing someone here knows how ROM manager works in this regard, but if not, I'd be happy to be a guinea pig... after all, I can make/restore backups now! : )
gtg465x said:
Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!
Click to expand...
Click to collapse
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be
Komodo Rogue said:
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be
Click to expand...
Click to collapse
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.
Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?
gtg465x said:
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.
Click to expand...
Click to collapse
Oh, good to hear! Man I really have to sit down and try to learn some more technical stuff sometime, because ROM creation, and not even just the theming aspects, is so appealing to me.
Maybe you can create a thread placeholder and describe what you've done so far? We're really getting OT, sorry all.
timbrendelaz said:
Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?
Click to expand...
Click to collapse
Oh, I thought you could flash zips through adb after doing the fix? Or no? (((edit: wait, no, I was thinking about pushing .apks through ADB, not flashing .zip files))) Hopefully this is something DG's new recovery might address. If no to both, could you distribute ROMs via nandroid backup files of a fresh ROM installation? It would be incredibly inefficient, but it would work, right?
Backtrack5/Ubuntu v10.04 Up & Running On Tab 10.1
StatementHave this on my Samsung Galaxy S2 and working perfect so i figured i would give it a try on the Tab 10.1. There were alot of people who helped get this running for other devices i will mention them so dont worry. Alot of modifications had to be made in order to get this to run on the Tab because it was really made for a phone not a tablet so please follow all the steps cause there is certain code that i had to right to get the screen size to fit. Everything is fully functional and working. Finally i think this would be a nice addon to your Tab esp if your a big Ubuntu fan, I am currently working with other developers to see if we can update this so it has the new Ubuntu v11.10 but for now follow the steps and enjoy and if theres any questions or requests just write on the thread and PM me. ENJOY!!!
Disclaimer
I am not responsible for damaged devices, bricked devices, Soft bricked devices, and if you run wrong code ETC
Thanks To:DooMLoRD, anantshri, n1nj4dude, KingOfThaJungle None of this would be possible without these guys and if im missing anyone please let me know and im sorry
Before We StartThere are going to be 10 files attached at the bottom you need to download all 10, place them on your desktop for now i will explain what your going to do with them after. Next you need to download 7Zip heres the link http://www.7-zip.org/download.htmlOk now those 10 files waiting on your desktop extract ONLY 1! i chose to extract bt.7z.001 once you extract you will be given a .img file create a folder called bt and put all ten of the files inside bt including the .img so you now should have a folder on your desktop called bt with 11 files in it. Take this folder and put on the root of your Tab.Now there will also be another file attached called bt5_sgs2_shell_scripts_v2 take this file and put it on the root of your Tab. Reboot into recovery mode and wipe cache and davik cache and then flash that file once complete reboot your Tab.Once your rebooted use some kind of file explorer i used root explorer and check the /sdcard/bt folder for the following it should look like this when you explore it./sdcard/bt/bt/sdcard/bt/bt.img/sdcard/bt/installbt.sh/sdcard/bt/startbt/sdcard/bt/stopbtOnce your verify that the above if correct you can proceed
Instructions On Launching BTStart Terminal Emulator on your Tab and enter the following commands step by step.sucd /sdcard/btsh installbt.shstartbtbtNow your in Back Track 5 shell! You should see [email protected]:
Instructions On Launching VNC ServerDownload VNC Server from the marketThen still in terminal typevncserver -geometry 1280x700You then will be presented with [email protected]: againThen look under it were it says new 'X' desktop is localhost1 that it the last digit in your port number if you ever exit VNC or close terminal or reboot you will have to run some commands to get back witch i will show you in a minute but always look at that localhost # cause it will change if you reboot so pretty much if it says localhost2 your port would be 5902 get it?
Now Launch AndroidVNCEnter the following into AndroidVNCNickname: btPassword: 12345678Address: 127.0.0.1Port: 5901Username: (Leave Blank)Color Format: 24-Bit Color (4bpp)
Getting Back In After RebootType the following commands to get back insustartbtbt
Screenshots & LinksAt Bottom Thank you and Enjoy!!!
Go to this page for the 10 files http://www.mediafire.com/?f9gk3p3t9wip5
Uhm... file bt.7z.001 is corrupted!? Please check. However, thank you.
go onto the original thread and get the files from there sorry i only posted the mirrors heres the link and your welcome hope you enjoy
http://forum.xda-developers.com/showthread.php?t=1331419
Haven't tried yet but looks great, sweet!
works good. nice guide. i suggest people download bt5_sgs2_shell_scripts_v2 from the link in the 3rd post
Cool. Does the wireless "card" in this device support injection?
FillTheVoid said:
Cool. Does the wireless "card" in this device support injection?
Click to expand...
Click to collapse
I would love to know this
Sent from my GT-P7510 using Tapatalk
i believe it does but im not 100% on that
I cannot get this to work. Every time I try to install the bt5_sgs2_shell_scripts or bt5_sgs2_shell_scripts_v2, it says installation aborted. Needs to be Nandroid restored otherwise it won't boot. Any ideas?
So can i use both of honeycomb and ubuntu alternatively or together? Because in screenshots i can still see honeycomb taskbar at bottom over Ubuntu.
Nice work. And how to uninstall it?
Ok for JAYDAWGX7: are you wiping cache and davik cache before flashing and is your cwm up to date? if so and still having problem try a different kernal and get back to me
Ok for PARAG31: yes you can run bolth all backtrack5/ubuntu is doing is running threw vnc you are not loosing honeycomb you still have that as a base platform backtrack/ubuntu is just running threw vnc so to answer your question this does run bolth
I try with two diferents kernels and roms first task650 in paris v5 and other with task650 new honecomb 3.2 stock and no luck to install the zip file in recovery instalation aborted allways display. please post your roms and kernels info to migrate and run this on my gt
celtichazard said:
I try with two diferents kernels and roms first task650 in paris v5 and other with task650 new honecomb 3.2 stock and no luck to install the zip file in recovery instalation aborted allways display. please post your roms and kernels info to migrate and run this on my gt
Click to expand...
Click to collapse
Yep, same problem here. Any ideas? Any one else try this?
P7500 running Overcome 10.1 Rom, with Pershoot Kernel 2.6.36.4, with CWM v5.1.2.3. Yes with wipe of both cache.
EDIT:
After further investigation, the zip file only contains the files found in the bt folder. Just extract it to the /sdcard/bt dir. Assuming that it makes no other changes to system.
Got to [email protected], haven't done the rest yet! Will update post later.
EDIT:
Everything works after this.
Plus, i dont think monitor mode or injection works. Not without modified drivers (STILL HOPING ITS NOT THE CASE). Maybe usb? Hows usb hosting on this? Hope someone can answer these questioms.
I have a compatible wifi adapter, but no usb adapter for the tablet! I'll put it on my buy list.
Will this work on the 3G version also?
Edit: Awesome! It works perfect, thanks! Only remember to have busybox installed guys!
The correct resolution is 1280x752, so it is : "vncserver -geometry 1280×752"
also ur script isnt flashable. only thing in /data is busybox, just install busybox from market and change script
will work on 3g and wifi versions
very nice, also works on GTab 7310 (8.9 Wifi 3g)
heaven, thank you!
Awesome, works like a charm, and it blows everybody's mind.
I spent a little time on try to get capture mode to work, but gave up with the original network drivers.
I hoped it would be possible to use a normal usb wifi stick connected to the adapter, compile the drivers, and load them as modules, but i'm getting error messages when doing that, and that's where my knowledge of linux ends.
Anyone tried this yet? Any pointers? (currently flashing overcome 2.0, will try to post errormsg later)
Also, I read in one of the CarrierIQ threads that one of the pieces of the app actually uses libPcap to snoop on our asses. Would it be any help (or problem) that that's enabled in the parent OS?
Just one question: Can I use bluetooth keyboard/mouse with it? And will TrueCrypt run?
Welcome to the CM10.1 for the Lenovo Ideapad K1
Legal disclaimer: I'm not responsible if you brick your tablet, or have other damages in the process.
Features:
Multi User support (max. 5 User)
WIFI
Overclocking ( max. 1,4 GHz)
GPS
Bluetooth
Camera front/back
HD video/audio
externe SD-Card
USB-Stick support
Gyro
Auto brightness (bugy)
Hardware / Software Rotation Lock
VPN Support
3G support
Home button
CWM 6.0.3.3
Install Procedure 1
You come from CM10, no wipe needed
1. Download Update and Gapps and save to SD card
2. Reoboot into Recovery Mode
3. Once in recovery, select the update file to be flashed
4. select the gapps file to be flashed
5. Reboot
Install Procedure 2
You come from a stock or other CM version
Full Wipe, all data will be gone
1. Download the nvflash and save it on your PC
2. Power down and enter APX mode on your tablet, with the USB cable connected to the PC
3. Run flash-win.bat or flash-linux.sh (depending on what your PC runs)
4. After table has booted, enter settings and select about tablet. touch 7 time on build number. Your developer option are visible.
5. Go to settings, Developer options and select Advanced reboot
7. connect your tablet to the pc and save gapps on your sd card. Or download gapps via liink.
6. Go in Recovery via long press of Power, and select "Reboot" then "Recovery"
5. Flash the gapps package that you downloaded in step 1.
6. Reboot
Downloads:
First update 3G Version or
NVFlash 3G or Mirror
First Update Wifi Version or
NVFlash Wifi or Mirror
Important. Only that Gapps version will work !!!
Google Apps alias GApps or Mirror
Current Releases (date 2013-09-26):
Wifi Version
3G Version
Bugs:
light sensor (never worked correct)
Wifi (works just with "keep Wi-Fi on during sleep, always")
Headset detection
Credits:
KHanning
Krook1
Breeder (Testing)
Koshu
and finally Codeworkx for so many tips !!! :good:
Info / Tips
- Developer settings: go in settings and select about tablet. Press 7 times on build number
Recovery Update
The Recovery will be updated with nightly version of the 18-07-2013.
Awesome work buddy !!. Downloading it. But will flash over the weekend.
Thanks for continuing work on this device.
Nice work! I've flashed it yesterday when you posted it on goo.im and it's running nice so far. Got sod but I put wifi to always on, anyways it doesn't seem to drain too much battery. Also maybe you should update the recovery as this one cause 0 folder nesting when flashing(I got emulated/0/0/0...) and this is repaired with newer recovery, I don't remind wich number. Everything else seem to be working perfectly, some little strange thing but I think it's due to CM nighlties and could be working correctly later. I'll thank you so much for keeping our device alive. Keep it going.
Edit: The recovery issue is fixed since cwm 6.0.2.3 and we got 6.0.1.1 so that's why it's nesting but that isn't dangerous or anything, it can be deleted and the data are simply at the bottom of the 0 folders tree.
kaschemme said:
Welcome to the CM10.1 for the Lenovo Ideapad K1
Click to expand...
Click to collapse
Thank you, kaschemme! Will download and flash when I get home as my tablet does not have too much data. THANK YOU!!!
ti-pich said:
Nice work! I've flashed it yesterday when you posted it on goo.im and it's running nice so far. Got sod but I put wifi to always on, anyways it doesn't seem to drain too much battery. Also maybe you should update the recovery as this one cause 0 folder nesting when flashing(I got emulated/0/0/0...) and this is repaired with newer recovery, I don't remind wich number. Everything else seem to be working perfectly, some little strange thing but I think it's due to CM nighlties and could be working correctly later. I'll thank you so much for keeping our device alive. Keep it going.
Edit: The recovery issue is fixed since cwm 6.0.2.3 and we got 6.0.1.1 so that's why it's nesting but that isn't dangerous or anything, it can be deleted and the data are simply at the bottom of the 0 folders tree.
Click to expand...
Click to collapse
Where can I get this recovery file to flash on my tablet? Thanks! :good:
Mordred69 said:
Where can I get this recovery file to flash on my tablet? Thanks! :good:
Click to expand...
Click to collapse
It isn't made for our device yet so we can't flash it. It need to be updated and compiled from the rom source then it can be flashed so for now we have to live with this version.
Way to go!!
On goo.im for devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
"The file you requested was not found. Lets see if we can find that for you..."
Mordred69 said:
On goo.im for devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
"The file you requested was not found. Lets see if we can find that for you..."
Click to expand...
Click to collapse
There isn't nvflash folder in kaschemme. For me kaschemme/CM10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip download without any issue.
Hey, kaschemme, thanks so much for the update! I am looking forward to giving it a try, although I do use the USB Storage function a lot (it's the easiest way to copy movies onto my K1), so I might wait until after my vacation to do the update. I'd also like to see how the GPS functions are working, since I use my K1 a lot when I go geocaching. But it's wonderful to see that the K1 is still moving forward! :good:
K1Andy said:
Hey, kaschemme, thanks so much for the update! I am looking forward to giving it a try, although I do use the USB Storage function a lot (it's the easiest way to copy movies onto my K1), so I might wait until after my vacation to do the update. I'd also like to see how the GPS functions are working, since I use my K1 a lot when I go geocaching. But it's wonderful to see that the K1 is still moving forward! :good:
Click to expand...
Click to collapse
USB connection to a computer do work for me on ubuntu 13.04 better than it ever worked. I think by USB storage he is meaning USB OTG, like plugging a usb key directly in the K1 with the almost inexistant lenovo adapter.
ti-pich said:
USB connection to a computer do work for me on ubuntu 13.04 better than it ever worked. I think by USB storage he is meaning USB OTG, like plugging a usb key directly in the K1 with the almost inexistant lenovo adapter.
Click to expand...
Click to collapse
Right, USB host support (attaching a USB flash drive to the K1) is exactly what I mean, and what I use. I was fortunate enough to get one of those non-existent adapters.
ti-pich said:
There isn't nvflash folder in kaschemme. For me kaschemme/CM10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip download without any issue.
Click to expand...
Click to collapse
The problem is the NVFlash links.
The file is not at http://goo.im/devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
The file is at http://goo.im/devs/kaschemme/cm10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
Means it is inside the CM10 directory (linkage truncates whole sentence)
Thanks, ti-pich! Thanks Kaschemme!
K1Andy said:
Right, USB host support (attaching a USB flash drive to the K1) is exactly what I mean, and what I use. I was fortunate enough to get one of those non-existent adapters.
Click to expand...
Click to collapse
You are really lucky then, this is probably the only thing missing on this tablet, and that's why I'm waiting for google to release their nexus 7 full hd with a regular micro usb. Anyway, sorry I misunderstood what you said.
Kaschemme,
nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt. Downloaded 4 times.
Great job Kaschemme!
So far all my apps that I have reloaded are working. Thanks for your hard work.
Mordred69 said:
Kaschemme,
nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt. Downloaded 4 times.
Click to expand...
Click to collapse
I downloaded it, and it does appear to have the correct MD5 hash signature, but if I try to open or extract it using Windows Explorer, I also get a message that it is invalid or corrupted. However, if I use 7-Zip, it seems to open and extract with no problem. Perhaps it was built using some type of zip compression that isn't supported by the built-in Windows compression tools?
K1Andy said:
I downloaded it, and it does appear to have the correct MD5 hash signature, but if I try to open or extract it using Windows Explorer, I also get a message that it is invalid or corrupted. However, if I use 7-Zip, it seems to open and extract with no problem. Perhaps it was built using some type of zip compression that isn't supported by the built-in Windows compression tools?
Click to expand...
Click to collapse
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
hei Kaschemme.
thanks u so much!!!
this rom run so well.. the performance got better from the previous one.
i dont found any bug yet, but i read ur first post, that there is a bug on Headset detection...
let me try when i got home
anyway, great job!
Edited :
i just try to plug my headset on my K1..
And it works well..
So up to now, i dont found a bug yet...
Cool!
Mordred69 said:
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
Click to expand...
Click to collapse
Take a nandroid backup and try doing a clean flash (factory reset then flash), in case you did a dirty flash.
Mordred69 said:
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
Click to expand...
Click to collapse
Would you please let me know which version of 7-zip you used to extract the files from nvflash archive?
I tried 9.20 and 9.30alpha and both give me 'unsupported compression method'
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2