Database Develop

WLAN ok, but no websites are shown.

That's why I've never had an Windows Mobile device before.
Symbian, iPhone, everthing works fine with my WLAN. WPA Key and go go go
My Kaiser has a WLAN connection but the IE wont' show any page. Why?

First thing is to isolate the problem. Are you able to access the internet via Actice Sync? When connected to the WLAN are you able to access any other services on the internet such as windows live to check your email or if you have HTC HOME the weather info?
Also check to make sure you are getting a proper IP address, Gateway, and DNS server from the router to your PPC. Task Manager is a good utility which lets you run the Ipconfig/all command. You can also use the PING command in Task Manager to see if you can ping anything on the internet.
If you are getting the proper TCP/IP settings trying accessing a site using its IP address instead of its Domain Name to islolate if the problem is with the DNS server settings in PPC.
If still no luck post the results from the above troubleshooting and we'll go from there.

Correct IP Address, check! I forgot to mention...
Thank's for your help, I'll check the steps in the evening at home.^^

I just can connect to my router's IP address and see the configuration page. My device has it's own static IP.
IE says "site cannot be displayed, because the connection has been interrupted".
Do I have to quit HSPDA and Bluetooth? I guess not.

Let me know if you can connect to this http://134.126.10.50/

shazaani said:
Let me know if you can connect to this http://134.126.10.50/
Click to expand...
Click to collapse
No, same error.
Surfing via ActiveSync is no problem.

If you said that it's possible to connect to router but not outside of router, then do you use MAC Access Control and/or MAC Fillter Internet Firewall on your router?
Possibility MAC Filter Internet Firewall. Without MAC Access Control specified, it's not possible to connect to router.
Hopefully it helps.
Best regards,
TwoAce

I'm using a MAC Filter, but the MAC of my Kaiser has been written to the MAC list. I'm trying without the filter...

Previously I could connect to my home WLAN, but I could not perform any surfing until I came across a suggestion to goto Settings->Wireless LAN->Power Mode slide to Best Performance.. and viola.. I am good to go..
don't know if you have the same issue, but jus my 2 cents.. ohh n I was using Polaris aka Touch Cruise..

I have the same problem as [email protected] has - the root cause may or may not be the same however. Here is what I found in my case -
(i) Connecting to WLAN - no probems, works every time
(ii) While connected to WLAN, sending/receiving emails through my exchange server or browsing my company's intranet site - no problem
(iii) Surfing internet while connected through USB cable/active sync - no problem
(iv) Can't connect to any internet site while connected to WLAN
I found that when connected through USB Cable/active sync - the proxy server address seen when I go to Settings->Connections->Connections->Edit proxy server is the correct company proxy server address. The moment I connect to WLAN - this field becomes blank. Even if I edit and insert the correct address, it doesn't stick. The moment I disconnet from WLAN and go and check the proxy server address - again it shows the correct address. So the root cause of the problem seems to be that something is wiping out the correct proxy address while I am connected to the WLAN.
I remember seeing a thread somewhere discussing this vanishing proxy settings problem. I wasn't able to find it today but I intend looking again when I get an hour or so.

I agree with roomer11 about the power settings, i have two HTC tytn ii's and i had the same problem with both(one mine,one is my wife's)...i'm running wpa2-psk now but does it on wep too...

It work's.
I have deactivated the MAC filtering. I doesn't make any sense, because the MAC I've entered is the right one, but ok. Must be a Windows Mobile voodoo thing.

Wi-Fi connection by MAC Address Getaway

Hi
Is there app to connect to hidden wi-fi network with MAC Address as getaway??
I have network at my work so I cant change settings of Aironet Access point.

i think it's called "spoofing" your mac address

not really. spoofing is to change MAC address to hack to secured networks. In this case Getaway have MAC address and My WinXP notebook find it by MAC address not by IP. Network isn't block by MAC filtering.

Need to do one of two things... or both?

Ok, well basically my end need is to have my Google Calendar synced to my phone on which I have no service or access to WiFi internet. I'm in Iraq right now, and the only internet I have is via Ethernet.
I am hoping to, at the least, sync my calender over USB. But one thing I'd love to do is share my internet connection to my phone via USB like WinMo does. That way I can mess with new roms and the such while I'm out here. Thing is, it can't have it's own IP address because all IP's are assigned and I have to log in via my browser on my computer once I'm connected. It's a pain in the ass.
But, any help would be great. Thanks!

I am pretty sure there is not a way to do what you are asking. Without wifi or and kind of data signal, there is no way to connect the gmail servers to your phone. I am pretty sure that usb is out of the question, which seems to be your only option.
Sorry my friend.

This might help, all you need is linux. You could virtualize it, but idk if you can do that where you are at right now.

any possibility of getting a usb wifi device and setting up Internet Connection Sharing so your phone would have a local ip like 192.168. and share the connection on your computer with your phone???

I don't know exactly how the IP shiz works with ICS, but the ISP out here uses 192.168 IP's. All I know is that the phone would need to not have an IP, or something along those lines, for it to work. IDFK....

If you're in iraq, it might be hard to get your hands on one of these, BUT, in the interests of completeness,
Use of a regular cheap broadband router with integrated wifi WILL do what you are looking to do...
You might need to clone your computer's MAC address to the router's WAN device, then it'll connect to the DHCP server, then using EITHER the computer OR the phone, go to the browser and authenticate.
Note: I don't think that there is really any way to network the phone to the computer using USB, though bluetooth IS an option... it'll be a console-only operation though.
Final option is to get your hands on a wifi device for the computer (can be a USB device) and run it as a NAT, i.e. use iptables.
my95z34 said:
Ok, well basically my end need is to have my Google Calendar synced to my phone on which I have no service or access to WiFi internet. I'm in Iraq right now, and the only internet I have is via Ethernet.
I am hoping to, at the least, sync my calender over USB. But one thing I'd love to do is share my internet connection to my phone via USB like WinMo does. That way I can mess with new roms and the such while I'm out here. Thing is, it can't have it's own IP address because all IP's are assigned and I have to log in via my browser on my computer once I'm connected. It's a pain in the ass.
But, any help would be great. Thanks!
Click to expand...
Click to collapse

lbcoder said:
If you're in iraq, it might be hard to get your hands on one of these, BUT, in the interests of completeness,
Use of a regular cheap broadband router with integrated wifi WILL do what you are looking to do...
You might need to clone your computer's MAC address to the router's WAN device, then it'll connect to the DHCP server, then using EITHER the computer OR the phone, go to the browser and authenticate.
Note: I don't think that there is really any way to network the phone to the computer using USB, though bluetooth IS an option... it'll be a console-only operation though.
Final option is to get your hands on a wifi device for the computer (can be a USB device) and run it as a NAT, i.e. use iptables.
Click to expand...
Click to collapse
They don't care what the MAC is, just IP's. I can get a WiFi router if I need to. But, if I turn off DHCP on the router, does it still need it's own IP address? Or does it just act as a switch? All IP configuration is done on the device, there is no DHCP ran by the ISP.

my95z34 said:
They don't care what the MAC is, just IP's. I can get a WiFi router if I need to. But, if I turn off DHCP on the router, does it still need it's own IP address? Or does it just act as a switch? All IP configuration is done on the device, there is no DHCP ran by the ISP.
Click to expand...
Click to collapse
The cheap broadband router has TWO IP addresses. The public IP address assigned by the ISP's DHCP server (or manually if the ISP doesn't have DHCP), and the PRIVATE IP address used to communicate with the other devices that you hook up to it. It uses NETWORK ADDRESS TRANSLATION (see http://en.wikipedia.org/wiki/Network_address_translation ) to connect the client machines to the public network. To the public network, it appears that there is ONLY ONE machine connecting -- the NAT box (router) itself.
You will leave the DHCP *SERVER* (LAN SIDE) running on the router, you will disable the DHCP *CLIENT* (WAN SIDE) and configure the WAN IP/NETMASK/DNS/GATEWAY to the specifications required by the ISP. You will use the router's WAN port to connect to your ISP, you will use any LAN port to connect to your computer, and you will use the WiFi to connect to your phone. You will then have private IP addresses assigned to your computer and your phone, and these devices will be able to connect through your ISP's network via the router.

So doing that the ISP will see my router as my computer, then both my phone and computer can connect at the same time because they'll have their own private IP?

[Q] IP setting in HD7 (WIFI)

hi everyone,i bought HD7 last night and i have a problem with wifi.i want to connect my HD7 to my wireless routher. i must to set my HD7 IP.i can see HD7 IP but i cant change it.how can i do it? thanks

There is currently no way to set a Static IP address in Windows Phone 7, you'll have to wait for an update to come out that allows this.

not_in_love_en said:
hi everyone,i bought HD7 last night and i have a problem with wifi.i want to connect my HD7 to my wireless routher. i must to set my HD7 IP.i can see HD7 IP but i cant change it.how can i do it? thanks
Click to expand...
Click to collapse
You shouldn't need to manually configure your IP for the phone, the router will most likely assign your phone one if your DHCP is enabled (default on most routers). If you are wanting to connect it to your current home network and you have a wireless router, first you will need to go into the router configuration and set it to broadcast your SSID (if not already enabled). At this time the HD7 cannot connect to hidden networks (I don't see a point in hiding your SSID anyway, use better encryption, and a strong password with numbers, letters[upper and lower case], and symbols[if supported]). You can then use you HD7 to connect to your home network, once connected to your network go back into the router and look at your network. It should list all the devices currently connected to the network along with their currently assigned IP addresses. If you really need to, now that you know what IP address your router has assigned to your phone you can set your router to give your phone a static IP but really as long as you leave the router broadcasting the SSID your phone should have no problem connecting to the WiFi it should save the key and SSID, and it will get a new IP at regular intervals.

You shouldn't need to manually configure your IP for the phone, the router will most likely assign your phone one if your DHCP is enabled (default on most routers). If you are wanting to connect it to your current home network and you have a wireless router, first you will need to go into the router configuration and set it to broadcast your SSID (if not already enabled). At this time the HD7 cannot connect to hidden networks (I don't see a point in hiding your SSID anyway, use better encryption, and a strong password with numbers, letters[upper and lower case], and symbols[if supported]). You can then use you HD7 to connect to your home network, once connected to your network go back into the router and look at your network. It should list all the devices currently connected to the network along with their currently assigned IP addresses. If you really need to, now that you know what IP address your router has assigned to your phone you can set your router to give your phone a static IP but really as long as you leave the router broadcasting the SSID your phone should have no problem connecting to the WiFi it should save the key and SSID, and it will get a new IP at regular intervals.
Click to expand...
Click to collapse
i have an adsl modem that connect to pc through the router,my modem has an IP and my router has another one,my phone get the router IP for Gateway,so i cant reach Internet in my phone,i need to change gateway of my phone to reach to internet and i dont know how to do that

static ip

Is it possible to set static IP on Chromecast or DHCP is the only option?

Can't you go into your router (or DNS) and set the IP based on the device's MAC address?
Sent from my SCH-I535 using xda app-developers app

mikejr83 said:
Can't you go into your router (or DNS) and set the IP based on the device's MAC address?
Click to expand...
Click to collapse
Yes, that's what I have already done but this still requires having DHPC server on the network, and my goal is to turn DHCP server off.

I'm looking to do this too. I have the Chromecast connected to a route in L2TP mode going through a VPN. All of my other Android devices can connect to the internet. The Chromecast will connect to the network. The PC and all devices can see it, but it won't connect to the internet. For some reason you can't even stream a tab when the Chromecast can't connect to the internet, even if the LAN is functioning fine.
I suspect the problem in internet connectivity is running L2TP instead of DHCP.