Related
Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504
Will be receiving a HTC TyTN II. It will be Orange branded and sim locked.
I understand the first thing will be to install Hard SPL.
1. Now, I read somewhere that HTC haven't released any official ROMs of their own with Windows Mobile 6.1. Why is it that the Shipped ROMs wiki page has them here?
2. Whether or not they are HTC's own 6.1 ROMs, there are three I'm willing to try. They are (and I'm just copying and pasting these from the Shipped ROMs wiki page):
3.03.405.0 (Radio 1.64.06.04) updated original WWE found here http://forum.xda-developers.com/showthread.php?t=365047
3.02.405.0 (Radio 1.58.26.20) original WWE found here http://forum.xda-developers.com/showthread.php?t=365068
3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) found here http://rapidshare.com/files/1170540....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
These three seem to be "original" HTC Windows Mobile 6.1 ROMs. All are worldwide English. So what's the difference between each? Should I simply assume the one with the higher version number is the better one?
they have released wm6.1 check htc.com....
htc e-club...
tak.japan said:
they have released wm6.1 check htc.com....
htc e-club...
Click to expand...
Click to collapse
Thanks for confirming for me. I can't check the e-Club yet as I will be getting the phone maybe tomorrow. Anyhow, I really just want the original (and latest if possible) HTC Windows Mobile 6.1 ROM. Which should I pick form the list in the original post. Is one of them the same as the current one on HTC's e-Club?
tak.japan said:
they have released wm6.1 check htc.com....
htc e-club...
Click to expand...
Click to collapse
As your kaiser is Orange branded you will not be able to download from HTC, i wont recognise your imei. You should be able to find a link here, just root about the threads a bit. I'd start with the XDA kaiser wiki.
yardie.spike said:
As your kaiser is Orange branded you will not be able to download from HTC, i wont recognise your imei. You should be able to find a link here, just root about the threads a bit. I'd start with the XDA kaiser wiki.
Click to expand...
Click to collapse
Thanks. Yup, I found 3 that seem to be HTC originals. Don't know how up to date they are with HTC's e-Club but they should do. From the three I have found below, I'm assuming the higher version is the latest (3.28.405.0), but why does the Shipped ROMs Wiki page not just delete the other 2 and keep the latest one?
Here are the 3 I found:
3.03.405.0 (Radio 1.64.06.04) updated original WWE found here http://forum.xda-developers.com/showthread.php?t=365047
3.02.405.0 (Radio 1.58.26.20) original WWE found here http://forum.xda-developers.com/showthread.php?t=365068
3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) found here http://rapidshare.com/files/11705402...16.25_Ship.zip
Question 1: Which should I go for, the one I'm assuming as the latest (3.28.405.0), or are all three completely different things?
Question 2: Do these HTC ROMs include all the bundled HTC software that would normally come on an original HTC TyTN II Kaiser?
I'd really like these 2 questions answered before I try the upgrade.
yrsmart said:
why does the Shipped ROMs Wiki page not just delete the other 2 and keep the latest one?
Click to expand...
Click to collapse
Some users have better luck with older versions, or older radios. Newest isn't always better
yrsmart said:
Question 1: Which should I go for, the one I'm assuming as the latest (3.28.405.0), or are all three completely different things?
Click to expand...
Click to collapse
Appear to be different build versions an different radios, Some builds/radios work better for some users than others.
yrsmart said:
Question 2: Do these HTC ROMs include all the bundled HTC software that would normally come on an original HTC TyTN II Kaiser?
Click to expand...
Click to collapse
Read the thread attached to them., it will tell you what comes with the rom and what doesn't
yrsmart said:
I'd really like these 2 questions answered before I try the upgrade.
Click to expand...
Click to collapse
Hope this helped in some way. The best way to find the best ROM/Radio is to try them all and see what suits you the best.
Just remember that you will need to unlock the phone too, otherwise installing a new radio (which is needed for WM6.1) will lock your phone and require an unlock code. There is free software on this site to do that for you. Just follow it to the letter and try and use sim cards that are not sim code locked (which i done and had so many problems getting it unlocked)
If it arrives soon you have a very good chance it will have 6.1. If not there is a 6.1 update for download on the Orange UK 6.1 thread. With this you wouldn't have to 'crack' it and invalidate any warranty?
This is what I did and then load the cabs you want. I think every htc cab you could ever need is in here.
rlatarche said:
Just remember that you will need to unlock the phone too, otherwise installing a new radio (which is needed for WM6.1) will lock your phone and require an unlock code. There is free software on this site to do that for you. Just follow it to the letter and try and use sim cards that are not sim code locked (which i done and had so many problems getting it unlocked)
Click to expand...
Click to collapse
I think we are referring to Security unlocking. This process ensures that you phone cannot become bricked by installing the latest radios from HTC that have extra security. Without security unlock you cannot downgrade these radios without a tool called FrankenKaiser.
I'd recommend Sec Unlock for every user, It can be re-locked later if need be.
Thanks
Dave
Yes but the Orange UK phones are radio locked too, which requires the phone to sim unlocked and HardSPL installed to (To prevent Bricking)
stuart-online said:
If it arrives soon you have a very good chance it will have 6.1. If not there is a 6.1 update for download on the Orange UK 6.1 thread. With this you wouldn't have to 'crack' it and invalidate any warranty?
This is what I did and then load the cabs you want. I think every htc cab you could ever need is in here.
Click to expand...
Click to collapse
Thank you all for your replies.
The phone will have Windows Mobile 6.1 on it, but it's Orange branded with Orange's bloatware. I would prefer just installing the default HTC ROMs. It's also going to be SIM locked to Orange (I confirmed all this before purchase). But, buying the Orange one also worked out cheaper for me.
Question 1:The first thing I'm going to try is SIM unlocking it, while keeping the Orange ROM as it is. Then I'll try a non-Orange SIM card and see if it works. Will I be able to simply unlock the SIM by just using KaiserUnlocker.exe?
Question 2:After that, if I don't like the Orange branded Windows Mobile 6.1, isn't it simply a case of installing HardSPL v3.x.x (latest) and then continuing with the HTC ROM flash procedure as found here?
Question 3:I've just read some replies above about security unlocking. I'll need to do that as well? Is it automatic as part of HardSPL version 3.x.x?
Sorry for all the questions, I've done and still am researching the Wiki/stickies. I figure it'll save time if I clarify the steps now before attempting anything risky.
yrsmart said:
Thank you all for your replies.
The phone will have Windows Mobile 6.1 on it, but it's Orange branded with Orange's bloatware. I would prefer just installing the default HTC ROMs. It's also going to be SIM locked to Orange (I confirmed all this before purchase). But, buying the Orange one also worked out cheaper for me.
Question 1:The first thing I'm going to try is SIM unlocking it, while keeping the Orange ROM as it is. Then I'll try a non-Orange SIM card and see if it works. Will I be able to simply unlock the SIM by just using KaiserUnlocker.exe?
Question 2:After that, if I don't like the Orange branded Windows Mobile 6.1, isn't it simply a case of installing HardSPL v3.x.x (latest) and then continuing with the HTC ROM flash procedure as found here?
Question 3:I've just read some replies above about security unlocking. I'll need to do that as well? Is it automatic as part of HardSPL version 3.x.x?
Sorry for all the questions, I've done and still am researching the Wiki/stickies. I figure it'll save time if I clarify the steps now before attempting anything risky.
Click to expand...
Click to collapse
You must have Hard SPL v1 OliPof to use the Kaiser SIM Unlocker (from here)
The security unlock is not part of the Hard SPL 3.* process, there is a seperate thread by jocky on Security unlocking.
Thanks
Dave
DaveShaw said:
You must have Hard SPL v1 OliPof to use the Kaiser SIM Unlocker (from here)
The security unlock is not part of the Hard SPL 3.* process, there is a seperate thread by jocky on Security unlocking.
Thanks
Dave
Click to expand...
Click to collapse
Ah, but then the KaiserUnlocker says I must also be on a Windows Mobile 6.0 ROM to SIM unlock it, and my Orange phone will come with a 6.1 ROM. And on the HardSPL v3 FAQ, it says if you're on a 6.1 ROM, you should use HardSPL v3.
So, does this mean I can't unlock the SIM, without first installing HardSPL v3, downgrading to a HTC 6.0 ROM, then installing HardSPL v1, use KaiserUnlocker, then install HardSPL v3 again and upgrade to HTC 6.1 ROM?
Or what better option does an Orange-branded HTC TyTN II Windows Mobile 6.1 Sim-locked phone have?
yrsmart said:
Ah, but then the KaiserUnlocker says I must also be on a Windows Mobile 6.0 ROM to SIM unlock it, and my Orange phone will come with a 6.1 ROM. And on the HardSPL v3 FAQ, it says if you're on a 6.1 ROM, you should use HardSPL v3.
So, does this mean I can't unlock the SIM, without first installing HardSPL v3, downgrading to a HTC 6.0 ROM, then installing HardSPL v1, use KaiserUnlocker, then install HardSPL v3 again and upgrade to HTC 6.1 ROM?
Or what better option does an Orange-branded HTC TyTN II Windows Mobile 6.1 Sim-locked phone have?
Click to expand...
Click to collapse
Install Hard SPL v3 and try the SIM Unlock, sometimes it will work, if it fails, downgrade to Hard SPL v1 and Flash a WM6.0 ROM. Then Sim unlock, then Flash the 3.* Hard SPL and a WM6.1 ROM & Radio.
Thanks
Dave
DaveShaw said:
Install Hard SPL v3 and try the SIM Unlock, sometimes it will work, if it fails, downgrade to Hard SPL v1 and Flash a WM6.0 ROM. Then Sim unlock, then Flash the 3.* Hard SPL and a WM6.1 ROM & Radio.
Thanks
Dave
Click to expand...
Click to collapse
Excellent, I will try this method and let you know how it goes. Thanks.
hi! as you can see in the title, i want to flash my spl to install a shipped french rom. actually my phone's spl is 1.56.0000 and my rom is a dutch one.
i would like to install the french 6.1
is there any hope to do this without the usb?
nb, i'm running vista on my pc
thanks all of you for your help and sorry for my bas english!
mdbq said:
hi! as you can see in the title, i want to flash my spl to install a shipped french rom. actually my phone's spl is 1.56.0000 and my rom is a dutch one.
i would like to install the french 6.1
is there any hope to do this without the usb?
nb, i'm running vista on my pc
thanks all of you for your help and sorry for my bas english!
Click to expand...
Click to collapse
Correct me if I am wrong but I believe that this file has to be run directly from the phones main memory. You do have options 1. to dl directly to your phone 2. if you have a card reader you can put the file on your SD card and then move it over to your phone.
i took the risk to change my rom without hard spl, but it was the official rom...
now my phone works great and my spl is 3.29.0000 and my CPLD-8
can i load another ROM, an official one but in my motherlanguage? or will i brick my phone?
thanks for your answers!
mdbq said:
i took the risk to change my rom without hard spl, but it was the official rom...
now my phone works great and my spl is 3.29.0000 and my CPLD-8
can i load another ROM, an official one but in my motherlanguage? or will i brick my phone?
thanks for your answers!
Click to expand...
Click to collapse
You should be able to flash a different Language ROM using the GoldCard method. It has been discussed many times on other devices (the newer ones without Hard SPL). It will allow you to flash signed ROMs (not custom ROMs) from other languages. It involves using QMAT to generate a gold card. (I've not tried it so I can't advise on the exact steps.) Sorry.
Ta
Dave
thanks for your reply!!
i'll try it! ut i've bricked my herlad recently so i don't know yet if i'll try, bu, i'm curious... ;-)
cheers!
Here you go...
A working reconstructed stock AT&T Tilt 2 ROM.
No Radio
No Bootsplash
enjoy,
-e
Rapidshare Link: here
Thanks. Not too concerned about the Radio if it isnt hard to Flash. Is it true you have to do a SIM Unlock to flash a Radio? I looked at the top of the Radio Thread and it doesnt mention it.
What Radio will any of you ATT users who Flash this, use?
Downloading....
eras2r said:
Here you go...
A working reconstructed stock AT&T Tilt 2 ROM.
No Radio
No Bootsplash
enjoy,
-e
Rapidshare Link: here
Click to expand...
Click to collapse
thank you sir
Screen Shots
Please post screens for rom..thanks
Anyone try this? If so, and you have ATT, what Radio will you be using? Also, can someone confirm if a SIM Unlock is required to flash a Radio
Well done
Bravo! Can anyone cab up the ATT Dialer with Video Share from this ROM
Jola66 said:
Anyone try this? If so, and you have ATT, what Radio will you be using? Also, can someone confirm if a SIM Unlock is required to flash a Radio
Click to expand...
Click to collapse
Sim Unlock required to flash a Topaz radio. Check radio thread. I am using 4.49.25.17. No SIM unlock required for that one. Just HardSPL.
mcfarlan said:
Sim Unlock required to flash a Topaz radio. Check radio thread. I am using 4.49.25.17. No SIM unlock required for that one. Just HardSPL.
Click to expand...
Click to collapse
Thanks. You have no problems with using that Radio I take it? My stock was 4.48.25.20.
Jola66 said:
Thanks. You have no problems with using that Radio I take it? My stock was 4.48.25.20.
Click to expand...
Click to collapse
4.48.25.20 is not yet available...
Thanks Eras2r. It works.
Thanks Eras2r! It worked for me too.
Now if I could only get the Topaz 4.48.25.20 radio loaded up - in theory the rilphone.dll is already on the AT&T ROM so it should work.
I have HardSPL and unlocked sim. Yet, the Topaz radio will not load for me. Any ideas how to get it to load?
aaronsmckee said:
Bravo! Can anyone cab up the ATT Dialer with Video Share from this ROM
Click to expand...
Click to collapse
Let me know if this works. I think I have video share in this, but I might be wrong!
moderateinny said:
Thanks Eras2r! It worked for me too.
Now if I could only get the Topaz 4.48.25.20 radio loaded up - in theory the rilphone.dll is already on the AT&T ROM so it should work.
I have HardSPL and unlocked sim. Yet, the Topaz radio will not load for me. Any ideas how to get it to load?
Click to expand...
Click to collapse
Not SIM unlocked, it has to be SECURITY unlocked if you want to flash a non-Rhodium radio. If you want a Rhodium radio, only HardSPL is needed.
Check this thread for more info on how to security unlock - http://forum.xda-developers.com/showthread.php?t=555339
pinoymutt said:
Not SIM unlocked, it has to be SECURITY unlocked if you want to flash a non-Rhodium radio. If you want a Rhodium radio, only HardSPL is needed.
Check this thread for more info on how to security unlock - http://forum.xda-developers.com/showthread.php?t=555339
Click to expand...
Click to collapse
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Any word on if/when the splashscreen upon bootup will be included or if you can go back to the stock SPL?
this build is very stable (i installed it on my tilt 2). Wierd thing tho is that the HTC Youtube app is missing.
moderateinny said:
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Click to expand...
Click to collapse
....so you purchased the complete unlocker package from olipro WITH the security unlock included?? If not, you may not be security unlocked. When in bootloader mode, does it say "security unlocked" on top of the screen?
Later..........
doctajay said:
this build is very stable (i installed it on my tilt 2). Wierd thing tho is that the HTC Youtube app is missing.
Click to expand...
Click to collapse
Should be in the windows directory
moderateinny said:
I am SECURITY unlocked - I've done the HardSPL thing and can load ROMs, Radios, etc. without a problem. I am also sim unlocked, but I guess that isn't required.
I still cannot load the Topaz radio on to my Tilt 2 though.
Click to expand...
Click to collapse
Security unlock, SIM unlock, and HardSPL are 3 different things. Unless you purchased the complete package from Olipro as mentioned in the thread (or were given a code directly), you won't be able to flash a radio from a different model of phone.
SIM unlock = use of SIMs other than the carrier locked ones
HardSPL = use of other ROMs, as well as other Rhodium-SPECIFIC radios
Security unlock = use of radios from other phone models (such as Topaz)
Thanks so much OP
still cannot get the whole package with rom radio huh? I guess I will wait longer. Too itchy to try different rom. ahhhh
When i press the Power Phone Opens boot loader ?
Can anyone help me
ipl 2.11.1002
spl 2.26.0000
i want original room
but i cant knwo cid id ?
When i use any room A message appears ( error 270 update error )
the image file is corrupted .
i need help
In order to flash a new ROM, or even the original ROM you need to have the SPL version 2.00. Follow the guide in the ROM section of this forum for more information.
After installing the custom H-SPL, you can try installing any ROM that you like, or you could install the original one from HTC's website.
Hope you solve your problem.
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Original ROM for your Viva...
mohamed adel said:
i try to install the original one from HTC's website but when i give site serial number he Rejection my serial !!!!!!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=732802
thats the original ROM you need.
thanks for your help
but still not work
( error 270 update error )
the image file is corrupted .
Flash the ROM in the following order:
1- Install HSPL from here: http://forum.xda-developers.com/showthread.php?t=446446
2- Install ANY ROM as usual. It should work.
If that didn't help you then please include some more details about your problem, so we can assist you some more..
Good luck.
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
mohamed adel said:
thanks for your help
but it dont work in my phone
The same error message
i need any Program or way to Know divce id & cid id
my phone still Power on boot loader
Click to expand...
Click to collapse
reset device when in bootloader and try again.
shreyas18 said:
reset device when in bootloader and try again.
Click to expand...
Click to collapse
The same case
mohamed adel said:
The same case
Click to expand...
Click to collapse
Guide us through the steps you followed while installing HardSPL
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
mohamed adel said:
any hard spl i install give me the same error
i need any way to knew my Device ID & CID ID to Download the Right room
I have tried to find out through the Mitty
my log in Manage Attachments But it does not appear
Is there any other ways
Click to expand...
Click to collapse
Okay, I am officially completely lost.
my phone is locked in vodafone network
if you have original room plz uplod it
any Ideas
mohamed adel said:
any Ideas
Click to expand...
Click to collapse
Find a suitable way to unlock the device and then go for the hspl and stock rom flashing proedure...otherwise,contact the service center..thats the last hope..