Database Develop

Why oh why.. doesn't smasung make desktop or window mounts for our phones?

http://www.amazon.com/gp/product/B00470Q7X8/ref=s9_simh_gw_p107_d2_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=1EXAMQFNMYYRXNX1PBHC&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
http://www.amazon.com/Vehicle-Verizon-Samsung-Fascinate-Galaxy/dp/B0043H2CE8/ref=pd_bxgy_cps_img_b
Ok I've been looking around for a desktop charger or window mount for our phones and found nothing. But yet the other Galaxy class phones have them. Also.. I think each desktop and window mount is diffrent cause I tried the one for verizons Fascinate and it just didn't fit. So that's kinda dumb not to try to keep the mount specs the same where you'd only need to have 1 desktop charger and 1 window mount type.

Have you seen this stand?
http://www.samsung.com/us/mobile/cell-phones-accessories/SGH-I917ZKAATT-product

yay.. kinda generic thoo nice thing about one where you plug your phone into it is you don't have to worry about the port getting damaged from plugging it in and leaving it lay around. eh maybe they'll make it in time because the ATT store doesn't even carry the captivate one.

i have th Samsung one http://www.samsung.com/us/mobile/cell-phones-accessories/ET-CS01SBEGXAR . It is just OK.
A better solution is to go to Wal*Mart and in their automotive section is this stand. It works great for only $8.

I bought 2 of these in black:
elago M2 stand and dock from Amazon (link not allowed - sorry) @ $24.99 each
I had to bend the bottom prongs out just a little to handle the BodyGlove hard case, but it sits nicely either portrait or landscape. Granted, they aren't cheap but they are nicely made and generic enough that I could use them with a host of different phones.

Hmmm pretty nice find.
http://elagostore.com/elago-M2-StandDock-For-iPhone-4/M/B002OLM56K.htm

Or another choice...
I just received the Clingo stand for my wife's Focus. I like it even more than the elago stand, and it costs about the same. Go to www dot clingo dot com to see it (their price is full retail - again, I bought it through Amazon for something like $25).
This stand has a 360 degree pivoting head and MAN is the grip on the phone strong. It has a feed hole in the stand for the power/sync cord. Perfect for the nightstand while charging.
-Dave

Hmm I was looking at the clingo but some people didn't give it a good rating and explained about it not really holding their phone too well. I was looking for something portable too like
http://www.amazon.com/gp/product/B00278ZQBQ/ref=ord_cart_shr?ie=UTF8&m=AZZOQCD4U42P0
or
http://www.amazon.com/gp/product/B003778T8I/ref=ord_cart_shr?ie=UTF8&m=A2D0IBDF2WHYZS
Key chainable one looks nice, and it looks to be a bottle opener too..
I'll probably get 2 of them to try out, because I've been sitting in the coffee shop using my cup to hold my phone up while watching podcasts.. lol

Stay away from the Crabble
The first link - I bought 2 of those a while back, and it SHOULD have been spelled "Crapple". It is nothing more than some stiff cardboard. In a couple of days the stands were virtually unusable and I ended up throwing them out. Seriously, not even a week's use.
The second one below looks interesting as a mobile stand. Still, I am really digging the Clingo stand so far, enough so that I am ordering the mobile version (they have one on the site which clings to a laptop while holding a phone). Granted, I have no long term data on how well this will stick, but it seems to be working great so far.

The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
http://www.proclipusa.com/

Erik Latranyi said:
The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
Click to expand...
Click to collapse
From the info it looks like the charging mount doesn't rotate.
If you have it can you do a quick review pls.

Erik Latranyi said:
The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
http://www.proclipusa.com/
Click to expand...
Click to collapse
this looks nice... very interesting... about $90 for the holder, charger, and vehicle specific mount...
Not sure it would work with my thick-arse casemate case on it though...
charge74 said:
From the info it looks like the charging mount doesn't rotate.
If you have it can you do a quick review pls.
Click to expand...
Click to collapse
I don't understand what you mean? It actually says tilt swivel in the title.
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512213-18503.aspx

munkeyphyst said:
I don't understand what you mean? It actually says tilt swivel in the title.
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512213-18503.aspx
Click to expand...
Click to collapse
Dooh. Guess that's what I get for skimming to the bottom.
This Holder tilts/angles 20 degrees for optimal viewing. It is a high quality custom made holder with a neat and discreet design. It keeps your device in an upright position for better reception. Easily slide your device in/out of the holder. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device in your vehicle.
Click to expand...
Click to collapse

My USB Keyboard

For my elocity A7, I found this keyboard, it works fabulously.

keyboard
Where did you get it? Can you post a link?

I had bought one of these from eBay. It looked exactly like the one shown and it did not work. So I'd wait to see where the OP got his.
Sent from my Elocity A7 using Tapatalk

THAT is really awesome.
Sent from my X10i using Tapatalk

Got mine, flawless
Got mine off ebay right after I saw this post. Got it for $19. I didn't expect it to work but it did right away.
The case is very nice and professional looking. Faux leather (hey its only $19)
It has a magnetic clasp to keep it closed
As it opens you get the spot for the A7 on the left/top and the keyboard is embedded on the right/bottom. It is a complete keyboard with the 3 standard lights.
The usb cable is a thin flimsy cord attached the the usb end that connects to the left side of the A7 (please remember to unplug usb when closing the case and going about your business or you will break it)
There is also a stylus (useless)
The back of the case does have a picture frame style stand that folds out so the whole thing sits up like a netbook
The keyboard itself is small but netbook sized. I found hitting alt-F4, puts the A7 to sleep...nice! There's a "ZZZ" button in place of the usual "Windows Start" button. Hitting this brings up the menu option in whatever app you are in. The "Esc" button escapes you out of whatever app you are in. I'll have to keep playing with the buttons to see what other shrtcuts are there
I am really feeling this case, it makes this A7 look and feel like a real laptop.

@freemase; not sure what restrictions are for ebay links, but could you post the item # or maybe pm me a link for that.
thanks.
Sent from my X10i using Tapatalk

Yes freemase, and everyone else. Please leave a link so we can find one. I found some on ebay but don't wanna spend money and wait and have it not work.
Thanks.

Here's the ebay link
Well, I haven;t posted more than 8 posts yet so this forum will not allow me to post links.
I guess to find the one I got is to find the seller named superdeal_2004 and the listing is called
Portable leather Case WITH Mini Keyboard TABLET PC 7"
The item number for my ended auction is 260747417794
Good luck people!

thanks!
Sent from my X10i using Tapatalk

How snug does the A7 sit inside the case? Is it secured in there or kinda loose due to the brackets being too far apart?
I just bought a case from ebay about 4 days ago. It looks identical to this one, but the keyboard does not work with the A7. Not to mention the fact that the A7 does not fit tightly in the holder, it sits loose. Needless to say, I am returning it.
The one you bought is exactly what I was looking for.

lanetodd said:
For my elocity A7, I found this keyboard, it works fabulously.
Click to expand...
Click to collapse
I have the same kb. Works okay. The only problem is the clamps that hold the A7 are loose and no bottom support when using as a e reader.

You can get it at Ankaka dot com. search for tablet holder USB mini keyboard. Its from china, cost $13. get expedited shipping, if you get regular, it will take forever, took a month for me to get it.

I am giving this a try - thanks!

The tablet holder inside the top part of the case has 2 hooks for the bottom and a sliding hook at the top to account for various size 7" tablets. The A7 fits ok. It would fit better if the top sliding hook were a little bit tighter.
What does suck about this and other A7 stands is the fact the power is on the bottom of the A7 when in landscape, So I can't use this case as a stand and charge the A7. I also have the regular universal stand for tablets that everyone else got and it has that same problem. I have to prop my A7 on the stand on top of 2 hard drives to have it charging while in use.

@freemase; thanks for the tip about making a makeshift stand/gap for charging while in use.

Galaxy Tab 2 Cases Fit

Hey,
Just brought a Belkin case from PCWorld designed for the Galaxy Tab 2 10" and its a perfect fit. Holding the Nexus 10 up to the Tab 2 it's easy to see why. They are pretty much identical. Has the 3 fold design too. Now if I could just fit a small magnet under the material it would switch off when closed
Pictures to follow!

Whats the product name of the case you bought im heading to pc world later

Its called the Belkin Tri-Fold Folio with stand.
Luckily the shape of the corner grips means that although it covers part of the power button it doesn't actually touch it.

Thanks for the pics!

The-Kevster said:
Its called the Belkin Tri-Fold Folio with stand
Click to expand...
Click to collapse
How much was it ?

http://www.amazon.com/Belkin-Tri-fold-Folio-Samsung-Galaxy/dp/B007XDFNB8
$39.99 (Prime)

mug2k said:
How much was it ?
Click to expand...
Click to collapse
£29.99
Came up at £34.99 but as soon as I said the price was wrong they did it for £29.99 without any questions.

What would you rate it on a scale of 1/10?

Does the back align with the camera as well?

aly19 said:
Does the back align with the camera as well?
Click to expand...
Click to collapse
Camera and flash align perfectly.

Thanks, I just ordered one. My N10 comes today due to UPS leaving it at their shipping facility on Friday

Thanks! Needed something to protect my baby until the hardshell keyboard cases come out!

I just ordered a zoogue galaxy tab case. Says it fits both tab 10.1s.
I have a zoogue case for my Xoom and I love it.
It is a bit pricey ($55 shipped) and I would call it more of a couch / indoor case.
I will post pics when I get it. The race is on both N10 and case where ordered tonight!

Only problem with the tab cases is they cover a good portion of the side speakers I hate not having a case on this thing...
Sent from my Nexus 10 using xda app-developers app

duarian said:
Only problem with the tab cases is they cover a good portion of the side speakers I hate not having a case on this thing...
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Yes I seen that. I hope it does not sound to bad.
I just really like the adjustability of the case. I can go all the way forward or all the way back and any place in between.. Not just 3 notches like many cases similar to this.
I'm very excited and can't wait or sleep for that matter.. Ha

awesome! looks like a nice case. Will stop by a best buy tomorrow to try her out.

just bought one and it doesn't fit

MentaLrz said:
just bought one and it doesn't fit
Click to expand...
Click to collapse
What case does not fit?

pcworld gave me the wrong one (ipad).

Just picked mine up today. It's great. Even has a little tab to slide a stylus into.

The best car mount I've used...and it's under $3

http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
So I received this today, it was selling for local sellers for $15+ but I found it from this seller for under $3 (inc shipping!), I couldn't justify the outrageous markup, and ordered from HK, came in 2 weeks. It comes with a plastic adhesive disk you can use to mount it to your dashboard. The phone holder part is connected to the mount using a really sturdy ball joint which basically allows quite a bit of freedom when adjusting the position of the phone.
I was hesitant because I've purchased other mounts before that were more expensive, and they either didn't stick as well as I liked, or were too loose, or didn't give me the flexability I wanted. For under $3 I'd figure I'd try it, and I'm glad I did. It is IMO the best mount I've used. It really sticks! On glass I had a hard time taking it off, and using the sticky disc on my dash, it's pretty much stuck there. Very low profile too! You are able to position it so I have the phone coming down over the vents.
It's very stable, I've taken it over speed bumps,and I do not have a soft riding car, and it's stuck, even some of these bumps causes my Garmin GPS mount to fall off the windshield sometimes!
I'll have to take some pictures, probably take some tomorrow and post them up.
[edit]Pictures are up
They are not the best pictures, it's really early in the morning here, taken from my garage, in my car, from the driver's seat using an DSLR and a large flash...very cumbersome...I adjusted the settings to have the flash bounce off everything as minimal as possible.
I positioned the mount so where the phone sits is in front of vents for VERY easy access to the phone, (putting it on the windshield makes it too far to use), useful for navigating, or passenger music selection. The holder (where the phone sits) can be rotated 360 degrees, so I could have the phone in portrait instead of landscape. To be able to place the phone in front of the vents was the major reason for buying this mount, it's where I want my phone to be. Oh and it doesn't block the vents (at least that much) as you can still position them, potentially an issue for passengers in the rear though...

I wonder if they have improved it. my experience with this mount in the past was it wouldn't hold the weigjt of the phone.
glad to know it's working!
Sent from my SPH-L900 using xda app-developers app

Without the adhesive disk, the mount won't really hold to the dashboard or a wooden desk with the note 2...but will attach to glass and hold and hold and hold. It holds on to the adhesive disk the same as it holds onto glass.

thank you for sharing..

Tried one of these (DIFFERENT SUCTION CUP TYPE CAR MOUNT) with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!

one80oneday said:
Tried one of these with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!
Click to expand...
Click to collapse
I don't think this mount can even hold the size of the N7..pretty much the width of the Note 2 is the largest you can go with this mount...not even sure how you got a nexus 7 on it.

Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app

alterstill said:
Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.

one80oneday said:
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.
Click to expand...
Click to collapse
Lol @ nikes.
I didn't like suction cup mounts either (esp because the OEM garmin one I have falls off regularly...and I've tried others that have failed as well...and I don't like the vent ones because 1) they don't like my vents 2) they prevent the vent from being adjusted...this is the only one I've used that really works (YMMV) but for under $3 it's not much of a gamble.

would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
right now I am using a igrip (you can get them oem for $13) the nice german made ones.
its positive release (bad) but it holds nicely and the note ii in case is so wide it BECOMES a positive hold since you have to force the note ii into it to make it fit but the result is its VERY secure and I love the arm and mount.
Here is the igrip in the minivan
would love to see some pics of your note II in this holder you linked too !

Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Sent from my SCH-I605 using Tapatalk 2

nerys71 said:
would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
would love to see some pics of your note II in this holder you linked too !
Click to expand...
Click to collapse
Not sure what you mean about positive hold or positive release...but it's a spring loaded clamp and you have to pull on it to fit the note 2 in, and it clamps on the note 2, I have a TPU case (S-curve, which is another under $3 you can find on ebay, and IMO it's the best plain TPU case i've used as well, and I've spent lots of money on cases in the past, it's got good grip, more rigid than other TPU cases, and is soft enough to absorb shocks...back on topic)
Dakota0206 said:
Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Click to expand...
Click to collapse
I've used plenty of expensive mounts in the past, and I live in Australia a country where stores have very poor return policies and seriously I love this mount the most because of the ways you can position it, but I only have it in one position because that's where actually want it.
Pictures are in the first post as attachments

Dakota. OFF the caffeine. Now go sit in the corner dill the DT's wear off and come back when your normal again and its not about the price its about the 3 weeks shipping time to "find out" when a couple questions can possibly save me 3 weeks waiting
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!

nerys71 said:
D
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!
Click to expand...
Click to collapse
Oh I just posted the pictures! Lol! You didn't miss anything
And yes it is Positive hold, very strong hold.
I will test the mount more thoroughly later and report back.

Looks good, and at least I know it will fit nicely in my Subaru
Sent from my GT-N7100 using xda app-developers app

ahh good thought I was going whacky there
good, strong hold is very good be sure to see how much more "room" it has for something bigger (if thats not already the max) ie can it go half inch biggger etc..
the problem with expensive mounts is they are actually $3 mounts designed well with good quality control.
SO if you can find the cheap mount with the same good design .....
problem with my igrip I pictures is that you have to FORCE the note II into the mount with case. with plastic style cases not an issue but lately I am loving the wood bamboo cases I got. the igrip scratches them (them arm wings have plastic LIPS that you have to "get past" to put it in and take it out. this is good since that keeps the phone from falling out forward. but since I am slightly over what its designed to hold these lips TOUCH the case in insertion and remove with some force ie scratching the wood.
so I am looking for alternatives

Daemos said:
http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
Click to expand...
Click to collapse
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.

The bad thing about the vent mounts is that, depending on the design, the phone usually blocks airflow to the driver or passenger and if the heat is on this heats up the phone generally depending on whether or not the vent can be completely shut off.

Shady Gambino said:
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.
Click to expand...
Click to collapse
I'm 100% sure it's not a iottie design, as I've seen this exact same mount sold under different brand names (BBM in South Korea). There are times (many times esp for low cost items) where Chinese factories design the mounts/products, pitch them to different clients, who then apply their own branding for their specific market/region.
So...in the end they pay even less than what you'd pay on ebay...but charge you way more. So if you are happy getting ripped off by companies who charge lots of money for very little innovation...go for it.

To answer questions:
The width of the note 2 + my case seems to be the mounts physical limit for opening.
In portrait it holds just as good as landscape.
However, I have found if you use the mount as shown in the iottie, it seems firm, but not as stable as the position I have, but I don't plan to use it that way as the other way works better for me.

I need a small portable stand that hold the Note 2 in airplane flights

I'm having some difficulty identifying a stand that matches my requirements. Been Searching a lot but haven't found anything perfect yet. Most are too big and not pocketable.
What I am looking for:
-Very small and light, but sturdy. Preferably pocketable easily.
-Resistant and fairly stable to hold the phone on the food tray on airplanes.
-With some angle adjustment if possible, but around 45 degrees should be good enough.
-Capable of holding phablets and phones (Note II, Galaxy S2), no need to support Tablets.
-If it can hold a Note 2 in a case or with an extended battery, that is a plus, but not essential.
-Able to pass airport security checks (if in your pocket).
-Can be bought in EU (or from somewhere else with fast delivery)
I checked several but most of them look either too large (made for iPads) or too flimsy. Some are not adjustable at all and others have a layout that cannot be pocketed.
This one transforms into some sort of USB Pen and looks interesting, but I'm unsure if it can hold a Note 2 (in the right angle).
Anyone has this one?
Or can suggest any other models?
Thanks

The official stand/battery charger works. It holds well in turbulence.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

They have these soft silicone rubber things at BestBuy for a couple bucks.
Sent from my EVO using xda premium

step 1 - find an old audio cassette case.
step 2 - open the case all the way back and place on a flat surface.
step 3 - put your device on/in it depending on orientation.
it works surprisingly well.

For the best value mutli-purpose holder, see post #9 of this thread http://forum.xda-developers.com/showthread.php?t=2118979
In case the suction cup does work on the airplane tray, you can lower the phone down to sit on the tray directly.
For a simple device, this one http://www.tinydeal.com/one-hand-adhesive-washable-ring-holder-stand-for-mobile-phone-p-58445.html works well too. But the ability to adjust the angle is very limited. This is also a poor man's Flygrip. This device stick to the phone by a sticky pad, you can attach/detach it to and from the phone repeatedly without leaving any mark on the phone. One little trick. Wash the sticky pad with warm water,shake off the water and attached it to the phone. It adhere to the phone surprisingly well.

Souai said:
step 1 - find an old audio cassette case.
step 2 - open the case all the way back and place on a flat surface.
step 3 - put your device on/in it depending on orientation.
it works surprisingly well.
Click to expand...
Click to collapse
Ahaha, I see what you mean. But it works best for portrait. I want to use it in landscape for movies... there's less grip that way and it will probably fall off in a plane.

I just use a dollar bill (or any kind of bill actually) and origami a stand: http://pockethacks.com/how-to-build-your-own-phone-stand-from-a-dollar-bill/
It works well, very sturdy, and once you're done, you just pocket it away.
Or better yet, get a case that has a built-in kickstand

I use a small, plastic, credit card shaped, foldable stand but I can't remember where I got it. It's similar to this one:
http://www.ifoldstand.com/default.asp
EDIT: Found the one I use:
http://www.standeazy.com/home.aspx
Short YouTube video:
http://www.youtube.com/watch?v=-hNg-lKPiYs&feature=youtube_gdata_player
Sent from my SGH-T889 using xda premium

It's not cheap, but can be fond on sale or just the first version, maybe the RocketFish PivotPad may suit your needs.
this shows the first version.
I picked up the first version for $5 on sale at bestbuy through slickdeals or something. Works good.

Been using Go Go Stand since it was profiled on CNET a few years ago.
http://www.gogostand.com/
I am still using both credit card size stands to this day (think about four years). Absolutely love it...so thin...and adjustable. Serves me REALLY well on business trips (used it w/ N1, HTC Sensation, Note 1 & 2).
Think you mentioned you were currently in Europe? Not sure how long it would take to get to where you are, but it wouldn't hurt to contact them?

I actually found out that good old Lego is very suitable for building a stand.

I usually find a useless hotel card or a any expired credit card to use as a temporary kickstand.
check this out... http://howto.cnet.com/8301-11310_39-10469907-285/the-four-best-phone-stands-money-cant-buy/

lovekeiiy said:
It's not cheap, but can be fond on sale or just the first version, maybe the RocketFish PivotPad may suit your needs.
this shows the first version.
I picked up the first version for $5 on sale at bestbuy through slickdeals or something. Works good.
Click to expand...
Click to collapse
That looks pretty cool, but it got discontinued

knight900 said:
I usually find a useless hotel card or a any expired credit card to use as a temporary kickstand.
check this out... http://howto.cnet.com/8301-11310_39-10469907-285/the-four-best-phone-stands-money-cant-buy/
Click to expand...
Click to collapse
The internet sux.
This is after installing flash player plugin ics and reloading the stock browser, after trying dolphin beta, after setting user agent to iphone as told in dolphin betas help.
Added----
Ok if I set user agent to desktop and manually search for the article from the home page, then at least the broken link pics appear but the flash stays blank.
For some reason the link above continues to redirect to m.cnet which is broken, even after clearing cache. Combination of cnet, adobe, android, dolphin (for having flash support but turning it off with no user override) and the internet as a whole, sux.
Sent from my SPH-L900 using xda premium

The one thing I used to use as a kickstand is a good ol business card holder. I just happened to find an unused one at my former workplace and it works perfectly. Granted its not adjustable (maybe adding a few business cards for thickness to prop it forward more could do the trick) but its perfect for my phone. Its a black metal mesh kind but heres thr link for it.
www.amazon.com/gp/aw/d/B00006IAKZ/ref=mp_s_a_1?qid=1360235997&sr=1-4&pi=SL75
Sent from my SGH-I317

knight900 said:
I usually find a useless hotel card or a any expired credit card to use as a temporary kickstand.
check this out... http://howto.cnet.com/8301-11310_39-10469907-285/the-four-best-phone-stands-money-cant-buy/
Click to expand...
Click to collapse
I second the hotel/gift card stand. Cheap and easy. I throw a rubber band on the front lip to add a little grip since the Note 2 is such a big phone.

vectron said:
That looks pretty cool, but it got discontinued
Click to expand...
Click to collapse
there is newer version out now. it's simular, but has a few changes. How you use it and what it does remains the same.
ZDNet just did an article on a couple weeks ago: linky. I found it all over the net. Amazon has it too. Finding it at $5 like I did, well someone else did and shared the link, will probably be more difficult.

I don't know how well it works with an extended battery case, but I have the icarpus stand, it works quite well:
http://icarpus.com
By the way, the stand you posted in your original post is horrible.
I own it, and It completely can't handle the galaxy note's size.
- Frank

I made this from an old vhs box. Two old credit cards or dvd case would work as well. It works in landscape and portrait.
Sent from my SGH-T889 using xda app-developers app

http://www.amazon.com/BLACK-iBracket-Stand-Holder-iPhone/dp/B007FOGF4E
It's a copy of the gogo mount I think. Ordered it on amazon for $3 shipped. It came with two, one extra as a gift! Gogo is in the uk so I didn't want to wait for shipping time. It's adkustable with 3 setting and hold my note 2 with commutet.
Sent from my SGH-T889 using xda app-developers app