Hello Everyone,
My BA is stuck at the Splash Screen, I suspect that the Bootloader is corrupt. Does anyone know how to flash it?
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
imatrix's suggestion.
@imatrix
Followed the steps before, and followed them again.. I'm still stuck.
Something interesting happened though:
There are two horizontal stripes across the splashscreen now.
I already tried to flash the OS, It doesn't work with the standard imate flash executable (It used to work before) and now I'm getting a 'MODEL ID ERROR' when I try to flash it using the BAupgrade... executable.
I tried with the MAupgradenoid tool, it flashes but I still get stuck on the splashscreen...
Thanks,
Wadih
BlueAngel Bootloader
Anyone has a way to either dump a bootloader file for the BA (Providing the file of course) or alternatively directives to copy it from another device (From the same make, i.e. Imate PDA2K) ?
Many thanks,
Wadih.
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
@imatrix
imatrix said:
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
Click to expand...
Click to collapse
I did, but as I specifed in me earlier post, eventhough the MAUpgradenoID flashes the files, I still get stuck at the splashscreen.
Interesting point: After flashing witht the MAUpgradenoID, I try reflashing back with the BAupgradeid.. I get the Model Error ID error back..
Something in the BA is wrong, and I believe it may be in the Bootloader. So, is there a way to replace the bootloader itself?
EDIT: By the way, I can't seem to be able to place a WM5 rom instead of the WM2003, although the flashing procedure starts, it quickly ends (i.e. without the percentage bar appearing) and says that the flashing worked successfully... But nothing gets actually flashed.
Many thanks for the help imatrix.
Regards,
Wadih.
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
@imatrix
imatrix said:
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
Click to expand...
Click to collapse
Thanks for the link, but how do I copy/get a clean boot bin file? (Which app, syntax, etc...)
Cheers,
Wadih.
BlueAngel froze on isalling wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
BlueAngel froze on installing wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
100/100 work
imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
Click to expand...
Click to collapse
thaks br very good
Hi, I have the problem, that windows does not recognize the Blue Angel any more, so no "WCEUSBSH001" available. Any help??
Thx
I had a crack in the side of my BA case and replaced it on friday. I pulled the battery, disassembled, and replaced the portion of the case that was cracked. I backed up all of my info prior to doing this thinking that I would have to reset the device after doing the work.
I am running Tuma 1.3.
After having the device unplugged for over half an hour and then hard resetting it It retained all of the info. I tried hard reseting it again and it kept restarting but wouldn't clear everything. I even downgraded to WM03, upgraded to 05 and it still kept stuff on the internal storage. Tonight I formatted the storage card. Deleted all the stuff I could in the internal storage, downgraded to 03, upgraded back to 05 and I still had some directories from the old install????? During the upgrade it also failed on installing the stuff in the EXTROM on my SD. I went in the storage card and have limited access to it. I can create a folder but get access denied when trying to delete it. I also cannot copy anything to my storage card.
Any help would be greatly appreciated. Is there a way to truly wipe the entire device besides <power button> + <reset>?
hard reset in WM5 :
press power+reset, and before the rom, and radio version appears on screen press record+camera there are three options on screen with record button you go to the next option and you change setting with camera button. first option mus be setted at NO and the second and third to YES. After setting the options press mail button, it will erease everything in your device
xplode said:
hard reset in WM5 :
press power+reset, and before the rom, and radio version appears on screen press record+camera there are three options on screen with record button you go to the next option and you change setting with camera button. first option mus be setted at NO and the second and third to YES. After setting the options press mail button, it will erease everything in your device
Click to expand...
Click to collapse
That did it! Thanks!!!
When I turned on htc diamond this morning,but I can see this message..
"The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.."
I clicked the send button to reset my device but only i can see is this message..
I think my device is stopped at the message. I clicked other buttons but it is no use.
I just turned on my device just like the other day...how can i reset or enter the default setting?.. Please help me guys..
For Hard reset, press the Vol Down + Center button + Reset button.
When you see the 3 color screen, press Vol Up so you do not format your Internal Storage.
"The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source. Press END to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings."
I have installed ezinput (link):
http://forum.xda-developers.com/showthread.php?t=536215
after I restarted the mobile, now it will not boot
the only thing I want is to save my contacts pls help..
I have the same problem But i dont get that error:S
Hard reset..
IS there another way to hard reset?
Because my VolDown dosnt work-.-
psShutXP can do an hard reset. tap the top/right small gear
http://ppcsoft.narod.ru/english/
I have a XT1068 / Moto G (2014) with Dual SIM and an external SD card. The phone is not locked to any specific network.
The phone froze when I was taking photos a couple of days ago and is now stuck on a restart loop. It loads so far as asking me to enter the password to decrypt the phone. After accepting the password, it restarts a split second after the Android logo is displayed. I only had the phone for a week, I have the stock firmware installed and haven't performed any fancy mods / didn't root the phone. I honestly have no idea why this happened in the first place
I know that a factory reset will fix the problem, but it will also wipe out the data/media on the internal storage. I desperately need to try to access that media before I perform the factory reset.
Some useful info...
Phone is using the encryption feature
Media is all stored on internal storage, but I have an external SD card if that helps the recovery process (provided that I don't lose the media on the internal storage!!)
USB Debugging was not activated before the bootloop started occurring, and I have no way of accessing the UI to activate it now.
[UPDATE #1]:
Using the phone's bootloader screen, I am accessing Recovery > Load from ADB
When I connect the phone to my laptop via USB and run adb devices, the phone is being detected and listed correctly.
The device has a status of sideload. Any attempts to run other commands like shell or pull give me an "error: closed" in the terminal window.
I need to get unfettered access to run ADB in full (not just the sideload command) while in recovery mode but without wiping out the internal storage.
Any ideas on what to do next?
Anyone?
Hi!
So I am having the EXACT same problem,
I managed to fix it by making sure the phone is off,
Then, press the power button and the down volume key
After about 3 seconds let go of both keys and some texts saying recovery, factory.. should come out
using the volume down button, navigate to the recovery and to select, press the up volume key
Wait for a little while and a dead android lying on it's back should come out saying 'no command'
Press the power button and the volume up button and then, only let go of the volume up button
You can lift the power button now..
Then, unlike the first menu , we navigate using both up and down volume keys and to select, just hold the power key for 1 second
using to down volume button, go to factory reset (yes you are going to factory reset)
then press the power button..
Then wait for about 5 mins to wait for it to reset..
If that method doesn't work, then Idk how else to help..
I hope it works!!:good: