Related
Hi,
i have the following problem:
i have used the Chevron tool to deploy the USBSwitcher App to test the debug mode...
i have used the tutorial to prevent my hd7 from relock, but that doesn't work...
The application has been revoked and uninstalled :'(
So im stuck at the debug mode with no chance to change the USB-Mode...
Could anybody make a C-ROM with that app?
Or is it possible to use the Bootloader-Mode to install an xap to WP7?
i hope that somebody can help me
im really desperate... :'-(
custom roms need access to HSPL. We dont have access to HSPL yet
So is there another chance to go back into zune-mode?
I've no idea. There seems to be **** all development going on for HD7. Custom roms aren't available yet. Maybe some one else can help ya.
Sent from my HD7
maybe there is a way that someone make a backup of his phone while the USB-Switch is installed...
then i have the chance to set the mode to zune-mode again when i install the backup!?!?!
hope that sby can help me
Srry for doublepost, but:
Does anybody having the same problem tried to flash another Radio ROM?
did it work?
Yes I know about you trouble.
The only way is to unlock your device, with a super cid.
My friend had the same expr., and solved it.
Super cid unlock will display "security unlocked" on your bootloader mode.
Oberoth said:
Srry for doublepost, but:
Does anybody having the same problem tried to flash another Radio ROM?
did it work?
Click to expand...
Click to collapse
I already flash my device (HD7) with another ROM that match with my Firmware, unfortunately the mode is not switching to ZUNE.
jasonsharp said:
Yes I know about you trouble.
The only way is to unlock your device, with a super cid.
My friend had the same expr., and solved it.
Super cid unlock will display "security unlocked" on your bootloader mode.
Click to expand...
Click to collapse
how can we do that?
Sooo
i found out something interesting...
as this device is in qualcomm mode now i installed the Qualcomm Product Support Tool (QPST) and connected it...
it works...
so could anybody which knows that program make a backup of his phone (when the USb-Switch-App is installed) so that i can get back into zune mode?
Would be great to hear from you...
so now the first update is out...
could anybody give me an backup from WP7 with the USB-Switch App?
would be really great...
but be careful:
before you give the backup you must be sure that you don't have an live account assigned because i don't want to mess up anybodys mails (or even read it...)
would be great if someone could post an fresh WP7 backup with only USB-Switch app...
thanks
Oberoth said:
how can we do that?
Click to expand...
Click to collapse
I dont know where you can find the SPL unlock service, in your place.
In China I only know one place named "Hua Qiang Bei" in Shenzhen City, which is one of the most biggest electronic market.
This unlock service only costs about 10USD, I have some friends bought HD7s from Shenzhen City, all T-mobile version and "security unlocked" shows on the bootloader mode. The devices are network locked when come from USA, I think this is the quicker way for the seller to unlock the network (SIM), by unlocking the SPL.
I heard that they use a set of HTC debugging or testing software to do it, which limited people know about it. Thats all i know.
oberoth, were you able to find a solution to your problem? I am in the exact situation and need dire help. I have spent too many hours trying to figure this one out.
Hi,
i haven't found s solution yet, but now there is RSPL/HSPL so maybe one of our great cooks can make a ROM with the USBSwitch-App?
Would be really great :O
Best Regards
Oberoth
There is reports on the internet of Tango rolling out on AT&T - can anyone confirm this? I used the cab sender method so of course when I check for an update, it says my phone is on the latest version 7.10.8773. However, there is Samsung firmware bundled with the A&T firmware - does anyone know what it does? Does it fix the hanging wireless driver, does it break interop-unlock, does it fix the issue when powering on the screen sometimes?
If anyone could capture the update via wireshark and give me a link to download and install, that would be great I mean.. unless it breaks interop-unlock, in which case I don't give a **** about it.
Thanks,
6-4
the most recent update from ATT is still @ 7.10.7720
This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab
did you try installing the firmware did the firmware relock ur phone?
Sorry - yes, I installed the firmware and there was no negative repercussions, worked flawlessly.
Sent from my SGH-i937 using XDA Windows Phone 7 App
you have to apply the prevent relock xap that jaxbox has on his windowsphonehacker website if you want to keep interop unlock if you apply the samsung update. Thats how im still interop unlocked, with tango and the samsung firmwae update which fixed the keyboard lag. i made a back up before i applied the samsung update just in case so i would do the same if i were you.
thanks, did the firmware update already. i have applied the prevent lock xap before doing the firmware update i kept a backup also just in case. works great and kept my interop unlocked.
One thing ive notice, before the fw update i can only play/pause/volume up, now everything are working including the next/previous track clicks controls.
Wow scratch that. My phone called home and now half my homebrew apps won't launch.. apparently reflashing is the only way to fix this? Great. Stock roms for the focus s aren't even available.. ****.
Sent from my SGH-i937 using XDA Windows Phone 7 App
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
Lucky you - I neglected to read the info about preventing the relocking, I just figured it would happen as soon as I installed the cab. What to do, what to do..
My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.
64GUNSHIP said:
This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab
Click to expand...
Click to collapse
spokanedj said:
My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.
Click to expand...
Click to collapse
See the link above. That's the Samsung LE2 firmware update pushed with Tango.
sweet! i used the zune/disconnect trick and got to 8773.
w/o it zune reported i was up to date with 7720
http://www.wpcentral.com/att-sitting-samsung-tango-updates-windows-phone-heres-how-get-now
BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?
sorry, i think i missed something here, has anyone applied the LE2 samsung OEM update that is shipped out with Tango and noticed if you can no longer use diagnostic tool to apply updates?
my phones still not arrived yet but surely updates can be done as following, please correct me if im wrong, ive been kinda used to the HD2 for years...
unlock
backup (A) (keep copy)
cab OS update
unlock if needed
backup (B) (keep copy)
apply OEM (LE2) update
at this point you should have an unlocked device but are unable to re unlock it if needed, but do benifit from newer drivers etc.
To update to the next OS or enable unlocking you
restore the backup of that same OS version BUT without the OEM update (backup B)
apply the next CAB OS update,
unlock it,
backup again (B) (keep copy),
apply next CAB OEM update
essentially for every OS update you revert your OS to the backuped up version without the OEM update allowing you do mod it after you cab update the OS.
unless we can install our own certs and make our own OEM update minus all the crap we dont need....
Yippikaye said:
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?
Click to expand...
Click to collapse
I have applied the fw update manually thru cab sender (did not used zune software).
Hi Guys,
I updated with the cab from 64GUNSHIP my samsung focus S but now is always rebooting.
I can't syncronize the mobile phone to restore the backup.
Can you help me?
Edit: Finally I can't restore with Zune pushing turn on button and camera button from the mobile phone, finally I restore with the Zune application.
Hey! I used cab sender for my Focus S, updated to Tango and now in Zune there's the Samsung update :victory: updated with no problems :good: solved many fixes like the keyboard, and sound
Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.
jess6217 said:
Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.
Click to expand...
Click to collapse
I lost my interop w/o backup after doing the updates, mine doesn't let me use internet sharing anymore either. However, using WinTT (http://forum.xda-developers.com/showthread.php?t=1587332) you can enable it with default settings on any interop/rooted handset.:laugh:
I've been running around in circles for hours, is it possible to go from a developer unlock to a full interop unlock -after- having updated to Tango 7.10.8773.98 ? I can load some XAP's, but root tools and wintt fail.
I had to format my PC and lost my backup.
I'm sort of in the same boat as you. I will be going to my local at&t device support center and getting my phone flashed. I'm hoping the guy there can use the oldest rom he has and or give me a copy of it. I'll post results.
spd_rcr said:
I've been running around in circles for hours, is it possible to go from a developer unlock to a full interop unlock -after- having updated to Tango 7.10.8773.98 ? I can load some XAP's, but root tools and wintt fail.
I had to format my PC and lost my backup.
Click to expand...
Click to collapse
no is the short answer if you have already got the newer firmware, the Windows build has little to do with it,although the tango builds do phone home to relock but that can be prevented
dev unlock is not interop unlock, which is needed to access high privileged functions
if you didn't update the firmware but you did let it relock then simply reapply the unlock and then apply the relock prevent xap, but I suspect you have already tried that suggesting you have the new firmware as well
goldenpipes said:
I'm sort of in the same boat as you. I will be going to my local at&t device support center and getting my phone flashed. I'm hoping the guy there can use the oldest rom he has and or give me a copy of it. I'll post results.
Click to expand...
Click to collapse
perhaps ATT will flash the older ROM, I doubt it though and I doubt it even less that they would give you a flashable copy
but stranger things have happened so lets (hope) wait and see
Not what I really wanted to hear, but that's about what I figured/expected. I can't imagine going into AT&T & finding someone who had a clue about re-flashing a WP device.
spd_rcr said:
Not what I really wanted to hear, but that's about what I figured/expected. I can't imagine going into AT&T & finding someone who had a clue about re-flashing a WP device.
Click to expand...
Click to collapse
indeed, much less someone willing to lose their job for a complete stranger
Sent from my Samsung Focus S using XDA Windows Phone 7 App
spd_rcr said:
I've been running around in circles for hours, is it possible to go from a developer unlock to a full interop unlock -after- having updated to Tango 7.10.8773.98 ? I can load some XAP's, but root tools and wintt fail.
I had to format my PC and lost my backup.
Click to expand...
Click to collapse
No interop unlock after firmware 2103.11.10.1
It is annoying everytime I plugin zune pop out the "update" thing for the firmware, anyone know how to disable that?
r19578 said:
No interop unlock after firmware 2103.11.10.1
It is annoying everytime I plugin zune pop out the "update" thing for the firmware, anyone know how to disable that?
Click to expand...
Click to collapse
change the device ID to a nokia
goto HKLM system platform
change OEMdevicename to Lumia 900
OemName to NOKIA ( that is case sensitive)
MODeviceName Lumia 900
that will stop the Samsung update notification and also let you use nokia apps
oh before you change them can you post what yours say? im curious about something
Hei guys can somebody help me?I'm using the guide to interop unlock samsung ativ s but when i click toast notification i remain with this.(see on photos)
And i can't acces registry editor.How can i acces registry?
The phone is dev unlocked with official GDR3.
Try this
I'm gonna give this a try but how can I acces phone/data?Its seems to not appear on computer.
*Sigh*
Reading. You should try it sometime, before trying to run hacks you don't understand.
Tell me: What does the second line (you know the one with bold text tell you you're doing wrong?
@sp4rt4n-i17: The problem isn't that his RPC is blocked (although it is), it's that Samsung removed the registry editor from the version of Diagnosis built into their latest firmware. I'm pretty sure that if Diag has been installed *prior* to the update it would work, but it seems that this is not the case here.
You need to either downgrade, or install one of the "custom ROMs" that just make the relevant changes. Check the Dev&Hacking sub-forum.
Hello there,
I have questions about my rooted Lumia 925.
I bought it used, with the latest Firmware. Then I loaded up the correct Firmware with Windows Device Recovery Tool, then I unlocked the bootloader, and now I have root access.
I wanted to load up Win10, I haven't made yet, as my phone works fine.
My very 1st question is: IF I'll be successfull with the OS-update, will I lose the root access later on?
I know I could flash the phone back to Win 8.1 but actually the very annoying part is to customize again the device.
Moreover I have a huge problem with "Back-up" built-in function of my WinPhone. I NEVER had a successful back-up of app, settings and SMS... Fortunately my contatcs are secured as they are synced with my account, but that's all.
This bring me to the 2nd question:
ANYONE HAS N IDEA HOW TO FIX THE BACKUP PROBLEM?! ... my phone backs-up pictures and Video on OneDrive BUT NOT the Apps and Settings and SMS...
I got this idea: since I have no chance to back-up my data and settings, what IF make a Back-up of all partitions let's say once a week, following this thread https://forum.xda-developers.com/nokia-lumia-520/development/make-backup-windows-phoneguide-t3628612 or using WPInternals, do I keep my contatcs/sms/settings/apps and so on ?!?
Anyone can confirm this ?
3rd question concerns UPDATE.
since i loaded the firmware 3051.50009.1424.0010 I keep getting this annoying message "there is a critical update, do you want to download it?" If I press on "agree" the phone gets the Firmware 3051.50009.1451.1011 . Then I lose all superuser rights... I tested it.
Is there a way to DISABLE the update completely? Like on Windows Desktop ?!?!
I have to say I got lucky here.
WPINTERNALS warns :
Updating your phone
After you unlocked the bootloader or enabled Root Access, you MUST disable Windows Updates on your phone. Future updates may corrupt the SecureBoot modifications and your phone may not boot anymore.
After you unlocked the bootloader or enabled Root Access, you can only update your Windows Phone by flashing a new Custom ROM which is based on the latest OS version.
Well I did this:
With "ROOT ACCESS ACTIVED" I pressed on agree to get the critical update. The updated failed. The Package has been downloaded but could not be applied (ERROR 800..... don't remember the error-code)
With "ROOT ACCESS DISABLED" the update has been made w/o errors.. and I had for a while the 3051.50009.1451.1011 ... no bootloader corruption !!! , then switched back to 3051.50009.1424.0010 to keep root access.
BUT can I get rid completely of this annoying message about the UPDATE !??!?! I do not want to challenge my luck again.
OR can I block completely the Win-Update process ?!?
OR can I force the phone to check on 127.0.0.1 instead of checking the Microsoft servers thorugh a registry modification?!?
OR could I modify the HOST file instead !? If I would know the server name, I could try to limit the contact by adding 1 line to the HOST file, something like: 127.0.0.1 windowsupdate.microsoft.com !?
Would this work!?
3rd question: I searched long about this... it seems nobody knows... well I try and ask it directly: is there any way to change the GUI ?
I want to know IF / HOW throug registry
1) I can change the tiles fill-colors using custom HEX or RGB format,
2) I can tiles outline/symbols color instead of using the annoying WHITE using HEX or RGB values.. (my idea is to make a "total-black" GUI with darkgrey symbols... )
3) If I can change phone FONTS (dream)
4th question:
My phone is branded Vodafone (as it has 32GB memory) I would like to unbrand it and use the nice computer Boor Screen "Energy Star" . I read I have to make actually a Custom-ROM since the splash-screen is part of the firmware. OK. So following WPINTERNALS, I can select a source FFU-file and extract the EFIESP partition and MainOS partition.
WPINTERNALS says: "You can enable Root Access on these partitions"
Well HOW?
If they are not on the phone how can I enable the root access and how can can I customize MainOS if it is on my Desktop Hard-Drive ?!?
I'm sure I do need another tool for that... Any hint for me please?! Anybody?
Then ok... "After you have unlocked the bootloader of the phone, you can flash the custom ROM to the phone". that's easy.
Last question, just curiosity: is there a SHELL in Win 8.1 mobile ?!
It wuold be nice to have sometime a hack-library divided by phone sometime.... hope that XDA mods will think about it.
With WPINTERNALS for WinPhones there is a fully new world to discover.
Thanks everyone for your answers.
In case you decide to reply, please be kind... since I cannot read your mind nor I have any "palantir" nor divination skills, try to explain things esaly.... e.g. as you would explain them to your dog.... :good:
Have unlocked bootloader and rooted old Nokia lumia 925 through WPINTERNALS... As I did not have many apps or games on it I would like to install some but now am stuck for how to get apps to phone or even is there a custom rom I can flash to it?...any help please..
PS: Phone is on windows 8.1 CYAN, I have made a full backup to pc with WPINTERNALS just in case anything goes wrong/
PS:-All fixed now and can now deploy xap