[I896] Firefly or Phoenix 2.2.1 version 4.5 - Captivate Q&A, Help & Troubleshooting

Hello All,
I have the Rogers Captivate i-896 and recently moved over from a Bell I-9000 GTM. Reason why I moved from I9000 is due to the scare that most of the Bell Versions weren't flash friendly.
Due to my bad experience in the past, I just want to double check before I flash any roms. My two big interests lately have been either the Firefly ROM or Pheonix 2.2.1 version 4.5. Just wondering, anyone on XDA with a Rogers I896 that is currently running any of these ROMs with no issues at all?
Sorry if this is a repeat. I'm just not about to read 800 pages through the thread. Thanks a lot and your feedback will help a lot!

I too would love to know the answer to this.
Sent from my SAMSUNG-SGH-I896 using Tapatalk

Firefly all the way!
The only flaw I have found in it is the SMS timestamps, that can be fixed by installing SMS time fix from the market.
Its infinately customizable. (there is a huge thread based on it and pheonix here, alot of the Pheonix stuff will work on it as well)
It also does not apply the AT&T boot screen on startup, so if you do have any warranty issues getting back to stock is all that much easier.
I'm currently running it and its great!
Its also based on our stock rom.........Whats better than that

GPS working?
Sent from my SAMSUNG-SGH-I896 using Tapatalk

djnoicatse said:
GPS working?
Sent from my SAMSUNG-SGH-I896 using Tapatalk
Click to expand...
Click to collapse
Yes I can get 9 sats in 10 seconds. 5meter accuracy

@nickm50 Sweet! Thanks for the reply..
Anyone else on here? What do you guys recommend? Firefly or Pheonix?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry its better than I thought!

Sweet! How do you do that test?

nickm50 said:
Sorry its better than I thought!
Click to expand...
Click to collapse
FireFly = Outstanding...
Check my untouched screen shot using the GPS!!!!!!!!!!!!!!!!

What do you mean by untouched?

fluidd said:
Sweet! How do you do that test?
Click to expand...
Click to collapse
Dial *#*#1472365#*#*

I'm gonna try out firefly right now. Will post if I run into any issues. Thanks
PS @nickm50 so my understanding is that you said that Phoenix themes is compatible with firefly right?
Sent from my SAMSUNG-SGH-I896 using Tapatalk

Some of the parts of them are. I don't believe the whole themes are. But there are firefly themes in the thread as well.
I know the dialers and boot screens work 100% for sure.

Flashing as we speak.. thanks for the feedback

Can I theme the Stock Dialer on the Fire Fly ROM? Or, will I screw things up if I flash this?
As per this URL: http://www.phoenix-hq.com/images/themes/dialers/dialers.html

fluidd said:
Can I theme the Stock Dialer on the Fire Fly ROM? Or, will I screw things up if I flash this?
As per this URL: http://www.phoenix-hq.com/images/themes/dialers/dialers.html
Click to expand...
Click to collapse
That will work! I'm running their green one right now

Dammit. Now I feel like a noob, with the question I am about to ask...........
Sooooo, the old way I flashed the rom is not working for me. I am installing Clockwork Mod Recovery via Rom Manager, and then I keep clicking "Reboot into Recovery Mode".. I've done this process over and over atleast 5 times, and its not booting into CWM Recovery. What do I do?
I am trying the OneClick ODIN, but it doesn't give me an Option of which ROM file to flash..
HELP?!

Have you got firefly installed?

What do you mean? I downloaded the ROM and put it on my SD Card.. But, its just a matter of getting into Clockwork Mod Recovery so I can flash it.. I know what to do in Clockwork, just don't know why its not booting into Clockwork Mod.. :??

power down the phone.
boot into recovery manually vol-/vol+ and power
when you get into recovery choose reinstall packages.

Related

Newbie ROM Question

Hey all, recently bought the Sprint HTC Hero CDMA, got it rooted, flashed, and using ModACO 2.2 Custom.
Before and After I installed the ROM
When I go to "settings" > "phone info" it says "firmware 1.5"
My question is, can I install a custom ROM that is higher than Android 1.5, or can I only use the custom ROMS under Android 1.5 category?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^
kronik03 said:
Hey all, recently bought the Sprint HTC Hero CDMA, got it rooted, flashed, and using ModACO 2.2 Custom.
Before and After I installed the ROM
When I go to "settings" > "phone info" it says "firmware 1.5"
My question is, can I install a custom ROM that is higher than Android 1.5, or can I only use the custom ROMS under Android 1.5 category?
Click to expand...
Click to collapse
First of all, as long as your posting a general question you "NEED" to post it under "General" or "Q&A" category!!
Once you are rooted, you can install "any" ROM that's compatible with your device and carrier!!!
Can some admin please move this thread to appropriate section?
Sorry and Thanks
Sorry, wasn't sure if I should do general or here just because it has to do with ROMS.
But, thank you for answering my question
I bet you guys are great to party with. Do you call the cops on someone that's had a couple beers too? Let the mods do their job. They don't need you crying tattle-tale.
To answer the original question, yes you can use any ROM in this section whether it's 1.5 or 2.1. Just pick one that has the features you want and go for it. Be sure to nandroid.
Going to try Aloysius 2.1
It has Apps2SD already installed it so it says, I've still been trying to get that to work right.
You just gotta wipe phone, partition sd fat32+ext2+swap, than install the new update.zip ROM right?
Just follow the instructions the the thread of the ROM of your choice. You'll do fine.
Well said sub. Well said. But yes just follow directions and search the forum. You will learn a lot.
-------------------------------------
Sent via the XDA Tapatalk App
I bet you guys are great to party with. Do you call the cops on someone that's had a couple beers too? Let the mods do their job. They don't need you crying tattle-tale.
Click to expand...
Click to collapse
Quoted for truth.
-------------------------------------
XDA Tapatalk
Decad3nce said:
^
Click to expand...
Click to collapse
LMFAO!!!!!
I think thats funnier than THIS
kronik03 said:
Going to try Aloysius 2.1
It has Apps2SD already installed it so it says, I've still been trying to get that to work right.
You just gotta wipe phone, partition sd fat32+ext2+swap, than install the new update.zip ROM right?
Click to expand...
Click to collapse
Yeah...Make sure to backup anything on your sdcard to your computer including your very 1st nandroid. Do not lose it. Which recovery do you have 1.6.2 or 1.5.2 or 1.2.3?
When creating the partitions, leave the defauts as they are unless you plan on installing 800+ apps. Most of the time the ROM will tell you what to do. Always nandroid and also copy your nandroid folder to your computer so you don't lose everything if you sd card fails
MOD EDIT - Moved to Q&A
I have 1.2.3
I got Aloysius up and running, still having trouble with the Apps2SD though.
Once I go into DConfig and save my settings it asks me to reboot. Not sure why, but phone won't start up with microSD card in it. It reads the card if I put it in after reboot though.

[Req] Notification Panel Redesign

I found this over on the CDMA forums and wondered if anyone had seen it or tried to get it working on our Hero's?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source for images: Droid Mechanic
jpool81 said:
I found this over on the CDMA forums and wondered if anyone had seen it or tried to get it working on our Hero's?
Source for images: Droid Mechanic
Click to expand...
Click to collapse
would love this! =)
It's a nice one.
Looks interesting! I think you need to compile a hero version of cyanogen with that new xml for it to work.
I'm actually trying it now, so fingers crossed and I'll report once I've got the ROM running
(compiling on laptop... sllllooowwwww)
krispijn_s said:
Looks interesting! I think you need to compile a hero version of cyanogen with that new xml for it to work.
I'm actually trying it now, so fingers crossed and I'll report once I've got the ROM running
(compiling on laptop... sllllooowwwww)
Click to expand...
Click to collapse
so, have you succeed?
is it working now?
vijaysapkota said:
so, have you succeed?
is it working now?
Click to expand...
Click to collapse
Lol... patience, my young padawan. Turns out that the original xml posted in Droid Mechanics' blog was not compatible with the current CM6.1 source format, so I needed to edit that.. (something about id assignment) resuming compilation as we speak
EDIT: it also turns out that I've pushed my little lappy a bit too far; my linux partition is outta space. I'll continue work when I'm on my big machine again at home. Prolly later tonight (if I don't crash driving home through the snow )
Excellent Look forward to seeing this working.
Okay this is kind of very off topic... But how did you get your link to show blue??
MacaronyMax said:
Okay this is kind of very off topic... But how did you get your link to show blue??
Click to expand...
Click to collapse
Just quote his post to see the where hes used the bb tags
Okies... I've managed to get it working
But...
1) The carrier text is not displayed correctly (should be right-aligned)
2) This _will_ change your framework-res.apk. Having build it using CM6.2.0 RC0 (currently nightly), it _might_ not work on other ROMs.
Once I get the text properly aligned I will put up a framework-res.apk and a metamorph package for those who want to try
Cool Thanks for taking this on.
Ok, I've solved it
Now all I need to figure out is how to get it to you guys. What ROMs are you using?
Wow nice!
FroydVillain 1.7.2 over here
I've created a two options for you guys to try... but first:
DONT FORGET TO NANDROID
Having said that: I honestly do not know if this will work or not (my hero is also also my main phone and is currently running my own custom build of CM6.1), but for those brave enough to try here you go!
(all files can be found HERE)
Your options are to:
replace your framework-res.apk with one of these (this will reset any theme you've applied!):
(plain) Cyanogen 6.1 - Stable
Floyo 1.2.0
Froyd 1.7.2
or use a metamorph
(plain) Cyanogen 6.1 - Stable
Floyo 1.2.0
Froyd 1.7.2
Again, I have no clue if this will work, so backup first! I recommend a wipe of cache (and maybe dalvik) as well.
Post if it works or not. If this way turns out to be one big mess, I can share my private build, but hopefully this will work.
can it be done to Hero 2.1 with SENSE?
sychie said:
can it be done to Hero 2.1 with SENSE?
Click to expand...
Click to collapse
Sorry, but no. The framework is totally different and the power widget is exclusive to Cyanogen mod CM6 which is android 2.2 based.
Will try on floyo and reply
Edit:- its working
Sent from my HTC Hero using Tapatalk
shamsud said:
Will try on floyo and reply
Edit:- its working
Sent from my HTC Hero using Tapatalk
Click to expand...
Click to collapse
Great to hear!
Did you metamorph or did you replace the framework-res.apk?
Will you be doing a gingerbread framework version of this?? (metamorph doesnt work for me )
Calico5 said:
Will you be doing a gingerbread framework version of this?? (metamorph doesnt work for me )
Click to expand...
Click to collapse
You betcha! I'm currently learning as a ROM assembler and at the moment my first ROM with natively build gingerbread theme is booting up

[ROM] VEGAn-Tab for Adam 5.1.1 040411

This is a port of the work that Gojimi, Roebeet, and I did for the Gtablet. I will try to keep it current with any VEGAn changes.
VEGAn-TAB for Adam BETA 5.1.1 040411: http://www.multiupload.com/J7DA70PDNR
Features:
VEGAn-TAB 5.1.1 base
NI Browser, Calendar, Sniffer, Calculator, Canvas, Mail'd, Quickoffice
gps.conf
(040411) Flash 10.2 auto install
(040411) Latest NI kernel with sleep/wake fix + CIFS/NTFS support
(040411) 3G toggle in build.prop
(040411) Performance mode toggle in build.prop
Build.Prop Toggles:
0(3G disabled), 1(3G enabled)
persist.3G.toggle=0
WARNING, Can Cause Instability, MUST WIPE DATA TO DISABLE
Very Fast (3000+ quadrant)
0(data2loop+SQL hack off), 1(data2loop+SQL hack on)
persist.perfmode.toggle=0
Instructions:
Flash from recovery like any other ROM
Wipe Data/Cache
Reboot
NIH Thread: http://notioninkhacks.com/forums/viewtopic.php?f=113&t=2072
Original Thread: http://forum.xda-developers.com/showthread.php?t=884103
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ISSUES:
Currently working out a flash causing browser crash issue
Going to add a new kernel with next release with sleep/wake fix AND Cifs support
Glad to see this! Looks like a very good rom, I will try it out soon.
Hi,
Unable to download...anybody kind enough to post another link..?
Best Regards..
Yay another dev workin on the adam!
Sent from my SGH-T959V using XDA App
How does this run?
pete338 said:
Hi,
Unable to download...anybody kind enough to post another link..?
Best Regards..
Click to expand...
Click to collapse
Try now, I uploaded the latest version and updating the link.
ttxcsabby said:
Yay another dev workin on the adam!
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I've been working on the adam since the very beginning . You should check out notioninkhacks.
Does this include the PixelQi toggle apk?
Thanks,
Daniel
danward said:
Does this include the PixelQi toggle apk?
Thanks,
Daniel
Click to expand...
Click to collapse
It is in there, someone had to manually install it to get it to work. I'm not sure, let me know if it doesn't and I can install it on first boot.
Got everything installed fine, but ended up finding two bugs. First was the mouse pointer not oriented correctly and not able to hit the right side of the screen. And second is when I reboot my Adam it just sits at a black screen and cant get back into recovery. I have to run the official Notion Ink fix to revert to stock and start fresh.
Any ideas?
isolated_epidemic said:
Got everything installed fine, but ended up finding two bugs. First was the mouse pointer not oriented correctly and not able to hit the right side of the screen. And second is when I reboot my Adam it just sits at a black screen and cant get back into recovery. I have to run the official Notion Ink fix to revert to stock and start fresh.
Any ideas?
Click to expand...
Click to collapse
The first issue is related to an accelerometer fix. Check the gtablet VEGAn-Tab post I link to for more information. There is a patch to fix the mouse issue, but then you use support for the games with x-y swap for the accelerometer.
The second issue isn't related to the ROM, but with the Adam's partition layout and clockworkmod or the stock recovery. It gives random issues like that to me every so often. If you keep having it, change to a different recovery then try again.
isolated_epidemic said:
And second is when I reboot my Adam it just sits at a black screen and cant get back into recovery. I have to run the official Notion Ink fix to revert to stock and start fresh.
Any ideas?
Click to expand...
Click to collapse
Do you have cwm installed? I've noticed this issue only with cwm installed.
Hi Rothnic,
is there something I have to keep in mind if I currently have installed the EdenX rom and want to install yours?
thx
André
I had the same problem and its because CWM doesn't flash the bootloader. Or maybe CWM incorrectly flashes the bootloader but either way it always hangs eventually. Stick with the stock recovery. I haven't had any problems since I did so.
Sent from my HTC Vision using XDA App
Tenny said:
Do you have cwm installed? I've noticed this issue only with cwm installed.
Click to expand...
Click to collapse
I had the same problem and its because CWM doesn't flash the bootloader. Or maybe CWM incorrectly flashes the bootloader but either way it always hangs eventually. Stick with the stock recovery. I haven't had any problems since I did so.
Sent from my HTC Vision using XDA App

[JUST TO TRY] Android 2.3 GRI40 (ported from T-Mo G2X)

Hi all! I've tried to run v20c on o2x.
Some libs and modules added from CM7.
-Odexed
-gsm\3g not work.
Intalling only with CWM 3.0.2.8.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
Download it now!
Nice! Will try it out when 3G is all good...
Really nice, I'm happy
Sent from my LG O2X CM7 Nightly
Ohhhhhhhh cant wait
3g mobile network doesnt work on this ? Just checking if i read 1st post correct :-D
Sent from my Optimus 2X using XDA App
Can we make phone calls?
ermacwins said:
Can we make phone calls?
Click to expand...
Click to collapse
No..
So, i will not fix some issues, cuz i'm not specialist in programming android...
ermacwins said:
Can we make phone calls?
Click to expand...
Click to collapse
NOPE..... not yet
SO...... is this a dead post now????
This has been known for a long time. Paul stated long ago, thats why he didn't use it for his rom yet.
Available to download!
Why should I install the rom if Internet not works?
Just try it. See how work 2.3 official.
P900 said:
Why should I install the rom if Internet not works?
Click to expand...
Click to collapse
I don`t know if you know but that`s Ooptimus 2X Android Development section not General section. Posting things here is mainly for people that can program and tweak android so they can kick in and help out on the project.
Hmm, has some one tryed to flash this ROM and after that flash latest baseband from v10c?
Since the ROM is ported and US is using a different radio hardware it might work to change baseband after flash?
Or am i totaly wrong here
What does Quadrant say?
Power in quadrant 2d test???
Sent from my LG-P990 using XDA Premium App
CM7 USB connection problem fixed?
and CM7 sdcard problem fixed?
When you fixed 3f problem I will try it.
plz have mercy people.
I see posts saying : when you fix 3g i will try. As if the guy wants you to try it. He is offering something good just hit the thanks button and leave this thread clean.
I would ask a moderator to clean up this whole thread full of useless comments.
help
xda-developers is to help one another with things like this.
he is offering he's findings so everybody can help to sove problems, and maby the road to a working rom, i don't understand the negative comments from everybody, give him a brake, he is trying to help, that's what this forum is for in the first place.
everybody is here to think of a solution.
thanks.
gtr-kir ------ thank you fore sharing you'r findings
i guess it might be really wrong, but did you tried to extract the radio from stock p990 rom v10d, or even CM7's one instead?
edit: i will try by my self!
omiblack said:
i guess it might be really wrong, but did you tried to extract the radio from stock p990 rom v10d, or even CM7's one instead?
edit: i will try by my self!
Click to expand...
Click to collapse
How did it go? How is the rom compared to cm7?

[Q] My exhibit 4g is not acting up correctly

Hello guys,
This phone is giving me headaches. Once I rooted the phone is not allowing me to to flash CWM and nothing at all but continue stock. Im looking like a paranoid for the Pit file and the flash rom for me to go stock 100% but there is nothing in the forum to well organized I guess that I have missed looking for it or getting lucky to find it.
Im on 2.3.3 right now and the more I do factory reset the more the superuser stays installed. Pleas advise how to successfully flash my phone from scratch for me to install one of the custom ported roms we have in the forum.
I came from Samsung Vibrant with an experience of more then 1000 flashes. I think the bad thing about this phone is that we have to navigate over 7 different forums to get the info correctly and is very confusing.
Guys I also dont have Network Signal meaning I cant use the phone.
Thanks guys very much for any help
SVLAN said:
Hello guys,
This phone is giving me headaches. Once I rooted the phone is not allowing me to to flash CWM and nothing at all but continue stock. Im looking like a paranoid for the Pit file and the flash rom for me to go stock 100% but there is nothing in the forum to well organized I guess that I have missed looking for it or getting lucky to find it.
Im on 2.3.3 right now and the more I do factory reset the more the superuser stays installed. Pleas advise how to successfully flash my phone from scratch for me to install one of the custom ported roms we have in the forum.
I came from Samsung Vibrant with an experience of more then 1000 flashes. I think the bad thing about this phone is that we have to navigate over 7 different forums to get the info correctly and is very confusing.
Guys I also dont have Network Signal meaning I cant use the phone.
Thanks guys very much for any help
Click to expand...
Click to collapse
I think you are in the wrong forum this is for the galaxy exhibit 4g aka the exhibit 2. I say this because I think the stock ROM that the exhibit 2 came with was 2.3.5
Sent from my Nexus 7 using xda app-developers app
well the Firmware version of this phone is 2.3.3
with a kernel version 2.6.35.7-T759UVKE8-CL205219
BUILD NUMBER is GINGERBREAD.UVKE8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone I have is that one above
thanks
SVLAN said:
The phone I have is that one above
thanks
Click to expand...
Click to collapse
Sorry man, wrong phone, try googling xda stock t759. Yours is t759 ours is t679. Best of luck
Sent from my Nexus 7 using xda app-developers app
OMG this phone is getting me so frustrate it very soon it will meet my wall.
Do we have a forum for this phone here at XDA?
thanks
SVLAN said:
OMG this phone is getting me so frustrate it very soon it will meet my wall.
Do we have a forum for this phone here at XDA?
thanks
Click to expand...
Click to collapse
No forums, but there are threads. Just Google xda t759 stock and read around. I know that a stock Odin flash able package is available, but I don't remember where. Also post in their forums because although our phones are very similar I don't know the exact steps/files for your phone.
Sent from my Nexus 7 using xda app-developers app
Sorry wrong no forms at all t759 they all were removed!
Sent from my SGH-T759 using xda premium

Categories

Resources