Any beutiful chinese ROM for TP2?? - Touch Pro2, Tilt 2 Windows Mobile ROM Development

Have been seeing some very nice ROM created by great chefs.... wonder if there is any created for TP2...

Can you show us examples?

FeareX said:
Can you show us examples?
Click to expand...
Click to collapse
This kind of rom http://forum.xda-developers.com/showthread.php?t=562773 that can Read, Write and display chinese characters...

Have you tried flashing one of those roms, then installing the appropriate fonts and IMEs? I have Chinese working perfectly on my Tilt 2 on the ROM you linked to.

Thanks
jedah said:
Have you tried flashing one of those roms, then installing the appropriate fonts and IMEs? I have Chinese working perfectly on my Tilt 2 on the ROM you linked to.
Click to expand...
Click to collapse
Can you please show me which ROM you have installed and whick fonts and IMEs you have installed that have worked perfectly on your Tilt2?

find Traditional Chinese ROM?tp2
Excuse me!!!
Where can i find Traditional Chinese ROM for Touch pro2 (Taiwan)
Rom 28244 sense2.5+cookie2.0
Thank you Sir
PS.Sorry my English is bad

bhloo said:
Can you please show me which ROM you have installed and whick fonts and IMEs you have installed that have worked perfectly on your Tilt2?
Click to expand...
Click to collapse
Sure, man.
ROM: Energy 28244 2/12 Dink
Font: sunglobe
IME:
ngn4's EZInput (basically the HTC IME)
http://forum.xda-developers.com/showthread.php?t=622054
The above setup is what I use now. If you have a Tilt2, you will need to use Tarkim's keyboard controller to remap the hard keyboard back to its stock setting after installing EZInput. Otherwise, you should be set.
I have also tried qq and sogou (formerly plumsip). Both work okay, but for qq, I couldn't figure out how to turn off Chinese; and I don't use sogou because it did not do traditional (or I couldn't figure out how).
Do a google search for the cabs above. You should be able to find them. If you can't find them, you can pm me.

Thank you once again
jedah said:
Sure, man.
If you have a Tilt2, you will need to use Tarkim's keyboard controller to remap the hard keyboard back to its stock setting after installing EZInput. Otherwise, you should be set.
What does this mean? And how do I go about using Tarkim's keyboard controller to remap the hard keyboard back to its stock setting? Any link or cab to help me do that?
Click to expand...
Click to collapse

question:
can you just flash a ROM from say HTC Honk Kong? i have the offical ROM from the HTC HK site; will it work on a TMOUS TP2?

bhloo said:
jedah said:
Sure, man.
What does this mean? And how do I go about using Tarkim's keyboard controller to remap the hard keyboard back to its stock setting? Any link or cab to help me do that?
Click to expand...
Click to collapse
Go to this link, go to post #26, and follow the instructions. I am not sure if you need both the Tilt2HWkeyboard cab and this keyboardconfig file, but I install both of them anyway (no harm in using both).
http://forum.xda-developers.com/showthread.php?p=6831859
opatim said:
can you just flash a ROM from say HTC Honk Kong? i have the offical ROM from the HTC HK site; will it work on a TMOUS TP2?
Click to expand...
Click to collapse
I've installed an official ROM from SE Asia before, and it seemed to work just fine. Same is probably true for an HK version (where did you find one.. I couldn't find one). However, I don't know what TMO's keyboard looks like since I have a Tilt 2. If it is different than the unlocked version, then you will need to find a way to map it back to stock (I'm sure there's a cab floating out there for that).
Click to expand...
Click to collapse

jedah said:
bhloo said:
Go to this link, go to post #26, and follow the instructions. I am not sure if you need both the Tilt2HWkeyboard cab and this keyboardconfig file, but I install both of them anyway (no harm in using both).
http://forum.xda-developers.com/showthread.php?p=6831859
Thanks, will give the above a try and see how it works...
Click to expand...
Click to collapse
Click to expand...
Click to collapse

THank you
Thank you everybody for your great info... I tried the above recomendations and works great on my TP2. One issue is the memory on my device seems to run from initial 53mb down to around 20mb after awhile, anyway to prevent that from happening???

That would be an issue with the rom you chose to flash, I would suggest using one that isnt full of bloatware and adding only what you need....The cab mentioned in the link above is for those who dont have a rom compatable or made for the Tilt 2....There are a few that were made specifically for the Tilt2 and no outside cabs for hardware are needed....Chinese language would be your only obstacle to overcome....
Regards,
WC

bhloo said:
Thank you everybody for your great info... I tried the above recomendations and works great on my TP2. One issue is the memory on my device seems to run from initial 53mb down to around 20mb after awhile, anyway to prevent that from happening???
Click to expand...
Click to collapse
You're welcome, dude. I can only take credit for pointing you the right direction. The real hero is the guy who made the cabs available for everyone.
As for RAM, the Chinese input does use up a little extra ram at initial boot, but definitely not 23 MB. At 53MB startup, it sounds like you're using one of Energy's Cookie Roms w/ the stalk start menu. Memory usage has been discussed to death in that thread. Do a search for memory or RAM, and you'll probably find several ways to save RAM. So far, the one that yields the highest results seems to be to replace the start menu. Also, consider using cleanRAM (you can probably find here in xda or in OpnMarket)

jedah said:
You're welcome, dude. I can only take credit for pointing you the right direction. The real hero is the guy who made the cabs available for everyone.
As for RAM, the Chinese input does use up a little extra ram at initial boot, but definitely not 23 MB. At 53MB startup, it sounds like you're using one of Energy's Cookie Roms w/ the stalk start menu. Memory usage has been discussed to death in that thread. Do a search for memory or RAM, and you'll probably find several ways to save RAM. So far, the one that yields the highest results seems to be to replace the start menu. Also, consider using cleanRAM (you can probably find here in xda or in OpnMarket)
Click to expand...
Click to collapse
Thank you once again, I tried installing HTC Clean RAM but this ROM won't allow me to do that, any great RAM Cleaner software out there??

bhloo said:
Thank you once again, I tried installing HTC Clean RAM but this ROM won't allow me to do that, any great RAM Cleaner software out there??
Click to expand...
Click to collapse
That's strange. What ROM are you using? I didn't have any trouble installing it on an Energy ROM (or any other ROM). Is this the cleanRAM you were trying to install?
http://forum.xda-developers.com/showthread.php?t=514333
Some other ram cleaners include Ram Sweeper and Memmaid. I didn't use them much, so I can really only vouch for cleanRAM.

jedah said:
That's strange. What ROM are you using? I didn't have any trouble installing it on an Energy ROM (or any other ROM). Is this the cleanRAM you were trying to install?
http://forum.xda-developers.com/showthread.php?t=514333
Some other ram cleaners include Ram Sweeper and Memmaid. I didn't use them much, so I can really only vouch for cleanRAM.
Click to expand...
Click to collapse
Yes this is the cleanRAM I installed but of different version, this one seems to work just fine, thank you once again....

Related

Liberated Chinese Traditional SnapVue Backup

Here is liberated Chinese Traditional SnapVue, http://www.zshare.net/download/177435127433672d/
Please use this for your ROM Cooking to help localization. This is backup of my system.
Thanks to cmonex for her help in reconstructing NBH file. She is amazing.
Thanks to thaihugo for WWE 1.22. I used to extract the OS.nb file.
Thanks to pof for the thread, how to dump HTC Shift ROM.
Thanks to all who answered my questions regarding this.
I am planning to install thaihugo 1.22, because I cannot read chinese and move to WWE.
I am learning cooking, please let me know how could i help. I have few cycles available for the next couple of weeks.
Thanks
Ram
Thanks for your help
Right now, my two subjects are phone and video (d3d mainly). If you want to help, please try to make this work on my rom, or to provide the necessary folders from SYS to adapt to any rom. Make sure you post your progress so we can stay in sync
Will do.
thaihugo
definately. If I could get phone and d3d on this, i could retire hermes, that I am using for my official calls and keep dell lattitude 620 home while travelling. I will try to work on those and update the progress.
Thanks
Ram
thanks a lot for your ROM, I flashed the new ROM without backing up the original ROM, otherwise, I will have problem if my shift needed to take back for service.
szjohnwong said:
thanks a lot for your ROM, I flashed the new ROM without backing up the original ROM, otherwise, I will have problem if my shift needed to take back for service.
Click to expand...
Click to collapse
szjohnwong
No problem. you are welcome.
Thanks
Ram
one more request, can you make it with RUU?
we can wait!
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Hi Saiweb,
Can you post the original CHT rom?
Many Thanks!
hkesunny said:
Hi Saiweb,
Can you post the original CHT rom?
Many Thanks!
Click to expand...
Click to collapse
It is original ROM only. For your other question, I am currently travelling as soon as I am back home, I would help you out. did you try to hard reset (take out battery, wait for few seconds and reinsert battery) and try.
Thanks
Ram
szjohnwong said:
one more request, can you make it with RUU?
we can wait!
Click to expand...
Click to collapse
Hi
I am currently travelling. I will as soon as I am back home.
Thanks
Ram
hkesunny said:
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Click to expand...
Click to collapse
Hi Sunny
I sent you couple of PMs regarding this. Follow this thread, http://forum.xda-developers.com/showthread.php?t=421351
Let me know how did it go.
Thanks
Ram
Try this.
hkesunny said:
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Click to expand...
Click to collapse
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
saiweb said:
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Thanks a lot for your great help. Your NBH file is downloading and I will keep you update.
Sunny
saiweb said:
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Thanks again for your kindness and great work! Just restored your NBH using CustomRUU. Everything looks fine and I got back the Chinese Snapvue. Could you do me a favor use Thaihugo mentioned style to re-build the Rom with the GPS?
Your kindness is much much appreciated!
Sunny
Gps is there if you copy OEMdrivers folder from my source. The gpstool, used to check the gps, is not here if you don't copy the content of the OEM folder. But you can try google maps to see if it get a fix.
Cool.
hkesunny said:
Dear Ram,
Thanks again for your kindness and great work! Just restored your NBH using CustomRUU. Everything looks fine and I got back the Chinese Snapvue. Could you do me a favor use Thaihugo mentioned style to re-build the Rom with the GPS?
Your kindness is much much appreciated!
Sunny
Click to expand...
Click to collapse
Sunny
Glad to know that it worked for you. Definately, will add GPS to that and upload it again.
Thanks
Ram
thaihugo said:
Gps is there if you copy OEMdrivers folder from my source. The gpstool, used to check the gps, is not here if you don't copy the content of the OEM folder. But you can try google maps to see if it get a fix.
Click to expand...
Click to collapse
thaihugo
I will do that. how far did you go with Phone?
Thanks
Ram
For the phone, I couldn't find any DLL that can connect. It's either a radio problem, or the RIL.Dll and rilphone.dll that must be found. Using the one from kaiser doesn't help, as it complains about sim door not locked.
So far, I cannot go further, but maybe the rights DLL's can make if work. That's also why I'm posting the kitchen, and hope to discuss about this in the thread.
thaihugo said:
For the phone, I couldn't find any DLL that can connect. It's either a radio problem, or the RIL.Dll and rilphone.dll that must be found. Using the one from kaiser doesn't help, as it complains about sim door not locked.
So far, I cannot go further, but maybe the rights DLL's can make if work. That's also why I'm posting the kitchen, and hope to discuss about this in the thread.
Click to expand...
Click to collapse
Ok. I will work on that. I have few cycles free starting today.
Thanks
Ram
saiweb said:
Sunny
Glad to know that it worked for you. Definately, will add GPS to that and upload it again.
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Few days past, still waiting your CHT Rom with GPS.
Thanks
Sunny

HTC Diamond abnormal font behaviour

Hi All,
I need your help please, my diamond is displaying strange unreadable fonts as attached in some applications, the reason for this is enabeling the arabic windows mobile of "informability Fee Jeibi version 6.1 build 09.02.08" the arabic support version released on HTC official support site.
Disabeling the Arabic windows mobile makes these application work fine but of course the arabic letters are not displayed properly.
Steps I have done and didnt solve the problem:
- Exclude the applications from the "exclude/include" functionality in the Fee Jeibi settings.
- modifying the registry font items to increase/decrease and even changing the fonts in "HKLM/System/GDI/SYSFNT/Ht, Nm and Wt" and the same in "HKLM/System/GWE/Menu/BarFnt and PopFnt".
Any ideas to help me please?
Thanks in advance.
I need your help guys, I am discovering more and more applications having the same problem, any advise please?
I use Mobdiv 416 arabizer. It works great with these applications mate.
I did't try the official one..if you want the arabizer I have...tell me and I will upload it for you. I think its better than the one ur using.
Shouma said:
I use Mobdiv 416 arabizer. It works great with these applications mate.
I did't try the official one..if you want the arabizer I have...tell me and I will upload it for you. I think its better than the one ur using.
Click to expand...
Click to collapse
I will be very thankfull if you did this mate, but I wish it won't ask for a hard reset again
Thanks a lot.
ntorki00 said:
I will be very thankfull if you did this mate, but I wish it won't ask for a hard reset again
Thanks a lot.
Click to expand...
Click to collapse
When I installed it, it did not require any hard reset for the mobile.
I think you just have to make sure that the official one you installed is removed completely.
Here is the link mate
http://rapidshare.de/files/40669167/MOBiDIV.416.cab.html
Tell me howz life going after you install ...its working here like a charm with all the other apps.
Shouma said:
When I installed it, it did not require any hard reset for the mobile.
I think you just have to make sure that the official one you installed is removed completely.
Here is the link mate
http://rapidshare.de/files/40669167/MOBiDIV.416.cab.html
Tell me howz life going after you install ...its working here like a charm with all the other apps.
Click to expand...
Click to collapse
Thaaaaaanx, you are the best
It is working great on my diamond with all the other applications too, I had to disable "Fee Jeibi" Arabizer because it is not giving the option to be removed from the system.
Thanks again
ntorki00 said:
Thaaaaaanx, you are the best
It is working great on my diamond with all the other applications too, I had to disable "Fee Jeibi" Arabizer because it is not giving the option to be removed from the system.
Thanks again
Click to expand...
Click to collapse
Your welcome m8. Glad it worked well
is there any cure for this???
a lil bit more description would really help us with your problem-.-
like: recent flashes;
hard spl status;
radio used and so on...
try to give us a little view at your mobile ;-)
Regards
just updated my signature...but it doesnt matter because it is present in almost all landscape menus and with official last ROM too and ofcourse default radio which ended 03...

advancedconfig.exe issue

OK, so i installed andvanceconfig to my fuze, but everytime i try to open it a message says an unexpected error has ocurred. it looks like this:
at
Microsoft.AGL.Common. MISC. HandleAR()
at
System. Windows. Forms. ImageList..ctor()
at Advanceconfig.(square).(square)()
at Advanceconfig.(square)..ctor()
at Advanceconfig.(square).(square)()
help please!!!
note: i already have net 3.5 installed
danes0301 said:
note: i already have net 3.5 installed
Click to expand...
Click to collapse
normally i'd ask if 3.5 was installed.
what rom and have you experienced anything like this with other apps? also, did you install 3.5 from a cab or was it in the rom?
ndn715 said:
what rom and have you experienced anything like this with other apps? also, did you install 3.5 from a cab or was it in the rom?
Click to expand...
Click to collapse
the problem is only with that particular app,every other app runs smooth, the 3.5 was installed using a cab
and what do mean by "what rom"??
thanks
nevermind, i just had to restart the phone, thank you anyways.
Watch out for Advanced Config. Some (like me) have found that it screws up basic function like being able to answer a damn call. There's a thread about this on PPCGeeks somewhere.
Lorrimer said:
Watch out for Advanced Config. Some (like me) have found that it screws up basic function like being able to answer a damn call. There's a thread about this on PPCGeeks somewhere.
Click to expand...
Click to collapse
thanks for the advice, i don't wanna mess with it too much anyways, i don't wanna end up with a non-working fuze, lol

Xperia X1 The best setup?

Hello!
This is my first post in the forum.
I recently got a X1 prototype to play with, im all new to WM Phones. So i dont know what to do and not to do.
What i personally feel is that X1 is kinda slow, but from what I've read I understand that some people has customized their own stuff for the phone to make it faster than it is with original firmware (or what its called)
My question to you guys/girls is: What is the best setup for the phone to make it run smooth but, what ROM should i use, if someone could put up a simple guide with links so what i need to download, the best roms, best appz.
Note that i dont want a GUI that looks like win 3.11. I still want it to look good. Not neccecearly with just spb shell.
Anyone that reccomend putting WM 6.5 into X1?
Anyway, the best stuff so the phone will run at its best!
That would be much appreciated!
Thanks in advance.
Edit: A list of "what to do" would be good, stuff i need to do before doing anything to the phone, to make sure i wont brick it.
Welcome .
I see that you are looking for the perfect setup and the easiest way of doing it, just like me, when I first came here. The short answer is that there is no such thing .
It all comes down to personal preference when WinMo is concerned. I can tell that you have read a bit, so my advice is to continue reading and do a lot of experimenting to see what you might like. You might like a stripped ROM that is blazingly fast and has only the basic features. You might want a slower, but fully stocked phone with every app available.
I can bet that if someone from the forum picked up my X1 he wouldn't like it and vice versa.
Maybe you should start with the ROMs that are specifically made for speed and smoothness and see if you like them. Just read the descriptions.
Cheers .
Hello! Thank you for your reply.
I almost figured that i would get a reply like yours. As we say in sweden: Smaken är som baken, delad = One mans meat is anothers poison. Ofcourse its hard to find the perfect setup.
But according to my directives (Going fast, but still pretty neat) As you said. Its either the basics = going fast, or a fully stocked = slow phone.
Isn't it something in between? A setup that contains both the basic features, but also some neat GUI.
And if someone has got any experience from WM 6.5 on xperia X1, please tell if it worked good.
Are they any ROMs more popular than others, if i put it that way....There must be something that a slight majority likes.
Is it even possbile to do something with a prototype?
Fructis said:
What i personally feel is that X1 is kinda slow, but from what I've read I understand that some people has customized their own stuff for the phone to make it faster than it is with original firmware (or what its called)
Click to expand...
Click to collapse
Your problem might also be hardware, rather software. Prototypes usually don't have the same "guts" as their commercial, mass produced siblings. Some have less RAM, or a slower processor, or less internal memory, etc.
harveydent said:
Your problem might also be hardware, rather software. Prototypes usually don't have the same "guts" as their commercial, mass produced siblings. Some have less RAM, or a slower processor, or less internal memory, etc.
Click to expand...
Click to collapse
Im with you there. Its not the first proto i have, so im aware that hardware may not be the same as retail. But still..firmware can do much, eventough ram is lesser than the retail (256) I have R1A at the moment.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
ah yes the R1A firmware. that's what i had on my X1i when i first got it. when i upgraded to the R3A....it was BEYOND the difference between night and day. it was like night vs standing on the sun.
to get the ball rolling, i would recommend getting the Sony Ericsson Update Suite from their website, and updating the phone through their automated system. it will bring you up to date on the R3A rom and it's painfully easy, so it will give you a taste of what's to come...
asayamalaka said:
ah yes the R1A firmware. that's what i had on my X1i when i first got it. when i upgraded to the R3A....it was BEYOND the difference between night and day. it was like night vs standing on the sun.
to get the ball rolling, i would recommend getting the Sony Ericsson Update Suite from their website, and updating the phone through their automated system. it will bring you up to date on the R3A rom and it's painfully easy, so it will give you a taste of what's to come...
Click to expand...
Click to collapse
If you didnt know this or just didnt read my post carefully, it said that its a Prototype im using. And SEUS doesn't accept them. It just say that im already using the newest firmware.
Fructis said:
If you didnt know this or just didnt read my post carefully, it said that its a Prototype im using. And SEUS doesn't accept them. It just say that im already using the newest firmware.
Click to expand...
Click to collapse
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!
laurence0609 said:
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!
Click to expand...
Click to collapse
Haha, thanks!
Nice that a Pinoy wanted to help
laurence0609 said:
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!
Click to expand...
Click to collapse
I totally agree - I run the Valkyrie ROM and it's absolutely amazing! I will recommend flashing it any day. One of my co-workers has the same ROM, and he's also amazed.
One thing to notice: If you're from Sweden, you might want to stay clear of the Manila versions. For me (from Denmark) I can't run the Danish keyboard settings while running Manila, and that's a total deal-breaker. After all, you want to take advante of full QWERTY, right?
Manila is what you might know as Touch Flo from HTC phones. IMO you should avoid that, go with Valkyrie's Xperio ROM (without Manila) and use the SPB panel (free). Then you have a really strong setup!
But hey - that's just me
millen said:
I totally agree - I run the Valkyrie ROM and it's absolutely amazing! I will recommend flashing it any day. One of my co-workers has the same ROM, and he's also amazed.
One thing to notice: If you're from Sweden, you might want to stay clear of the Manila versions. For me (from Denmark) I can't run the Danish keyboard settings while running Manila, and that's a total deal-breaker. After all, you want to take advante of full QWERTY, right?
Manila is what you might know as Touch Flo from HTC phones. IMO you should avoid that, go with Valkyrie's Xperio ROM (without Manila) and use the SPB panel (free). Then you have a really strong setup!
But hey - that's just me
Click to expand...
Click to collapse
Great, thanks for the info, i was kind of unsure what version of a rom i should install
If you're still feeling your way around, install the official Sony Ericsson R3A ROM. No need to Hardspl, and you'll still have the same interface that you're used to.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
First of all: If you want the original firmware, don't take it from XDA - take it from the SE official program.
Second: If you want to install a cooked ROM, first run HardSPL. This only works in some of my USB-ports, and only without inserting the memory card.
Once HardSPL is installed, you need the Kovsimg.nbh file...
Hope it helps
millen said:
First of all: If you want the original firmware, don't take it from XDA - take it from the SE official program.
Second: If you want to install a cooked ROM, first run HardSPL. This only works in some of my USB-ports, and only without inserting the memory card.
Once HardSPL is installed, you need the Kovsimg.nbh file...
Hope it helps
Click to expand...
Click to collapse
How am i supposed to get it from SE's Official program when its not supporting prototypes?
Do they have a site where you can download them manually?
Fructis said:
How am i supposed to get it from SE's Official program when its not supporting prototypes?
Do they have a site where you can download them manually?
Click to expand...
Click to collapse
Try here:
http://forum.xda-developers.com/showthread.php?t=475482
Oobly said:
Try here:
http://forum.xda-developers.com/showthread.php?t=475482
Click to expand...
Click to collapse
Already got that one...but its not working
Thanks anyway.

15.06.2010 ROM LAST - (My FIRST ROM not FAST/SMALL/SHINY)

Hy all
this is My FIRST ROM not FAST/SMALL/SHINY
my rom is big/has a fiew apps /does not have any new shiny theme
THIS IS NOT AN CONCEPT
IS AN ROM FASHIONED LIKE A BRICK
FAST AS AN ROCK
do you dare to try the most simple manila rom ?
DO NOT ASK FOR THEMES,APPS,enything that can be foud as an cab because i will not include them into rom
this rom is my aniversary rom
is based on 4 years of rom cooking and analising
Do you dare to try?
rom is bigger than anything you tryed before
but has 0 junk inside
i will not post any screenshot and ask everybody
DON'T POST ANY SCREENSHOT!
This rom comes with no guaranties,lack of support for bugfixes,and can brick your phone!
Do you still wanna try this rom?
1.here is the download link for splash screen (screen capture inside)
http://www.multiupload.com/90EKXVP5OY
DOWNLOAD,UNPACK AND RUN ROMUpdateUtility.exe
2.here is the download link for ROM LAST
http://hotfile.com/dl/39467052/d3aa3f4/rel.rar.html
DOWNLOAD,UNPACK AND RUN ROMUpdateUtility.exe
flash will take longer than any rom that you tried
rom will boot slower than any rom that you tried
free storage/ram will be lower than on any rom that you tried
YOU NEED TO MANUALY CONFIGURE INTERNET FOR YOUR CARRIER
MS apps provided as cabs (Install what you need)
http://forum.xda-developers.com/showthread.php?t=638942
Thanks for the base
http://forum.xda-developers.com/showthread.php?t=656744
looking forward to it..
You talk of big games but no link whatsoever.
Just put up the link already.
jerp has his style ....
anticipated april fool ??
maybe he's tricking us into believing its a bad rom and in reality it's a super fast windows 7 rom !!
NAH must be the first one !!
dun know what to say..
but i belive your skill...
i ran all possible test and rom is slower than others
rom is bigger around 250 mb
free ram is around 100mb so nothing shiny here (do not install htc task manager)
manila is standard like most roms here
so i ask you again
do you dare to try my aniversary rom ?
ok, i assume this is actrually your second rom, isn't it?
ha.
happily trying the rom.
do i dare.
of course!
jerpelea said:
so i ask you again
do you dare to try my aniversary rom ?
Click to expand...
Click to collapse
splash screen can't be 67MB downloading now ...
jerpelea said:
i ran all possible test and rom is slower than others
rom is bigger around 250 mb
free ram is around 100mb so nothing shiny here (do not install htc task manager)
manila is standard like most roms here
so i ask you again
do you dare to try my aniversary rom ?
Click to expand...
Click to collapse
lol, if it doesnt have anything special in it why the heck is it 250mb?
I made my own sense rom and that was 108mb getting jealous?
I just finished flashed.
Build 21896, sense 2.5 2012. missing HTC Task Manager , people and internet tab. 45% ram usage on boot (I installed Duttys Task Manager). nothing special in my opinion.
preston74 said:
I just finished flashed.
Build 21896, sense 2.5 2012. missing HTC Task Manager , people and internet tab. 45% ram usage on boot (I installed Duttys Task Manager). nothing special in my opinion.
Click to expand...
Click to collapse
some people never learn to read the instructions
and will never learn to read
neock said:
ok, i assume this is actrually your second rom, isn't it?
Click to expand...
Click to collapse
actualy .....
i lost count after my firt device long time ago
jerpelea said:
some people never learn to read the instructions
and will never learn to read
Click to expand...
Click to collapse
I know, i know. you wrote about "the most simple manila rom". but why people tab has been removed?
btw, nice joke. I thought it was a win 7
I appreciate your work. cheers.
preston74 said:
I know, i know. you wrote about "the most simple manila rom". but why people tab has been removed?
btw, nice joke. I thought it was a win 7
I appreciate your work. cheers.
Click to expand...
Click to collapse
no
is about task manager
that tab was removed because i don't like it
everybody who touched your phone will go there and look what pictures you have there so i hate it
you can fast type any person pressing dialer and typing first letter from name
so is useless and resource hungry
Love your ROM for being lite. A very nice surprise (I've forgot how nice is the bounce back effect at the end of a list; sad that Microsoft didn't use it for 6.5.x builds). Thank you!
It was funny to read the introduction. It's sad that some people didn't understood your game. I was hoping to see the funniest thread.
(The Opera Mini is in Romanian, or is because of my settings; when I've installed opera mini myself it was in English, even with the same settings. Nice lock-screen)
Cheers!
P.S. If you want to edit my post and delete some information don't hesitate and PM me.

Categories

Resources