Ok, 1st here is the case I got on Buy.com It is Neoprene outside, soft leather on the inside. It says USAGear on the bottom outer corner.
I like the case, but it is just a touch small.
You should be able to see by the pics that the upper corners just barely stick out of the edge.
It does a great job of protecting, but I opened the door to my van once and it slid off the seat and hit the ground - the corner of the cast hit first (top edge of the A7) and the A7 corner hit 2nd. Left a nasty concrete mark on the A7 - Really ticked me off.
Trying to find a little larger case with a keyboard....
Pics....
http://www.buy.com/pr/product.aspx?sku=220177260
http://img849.imageshack.us/img849/7348/casefrontbig.jpg
http://img851.imageshack.us/img851/4531/caseopenbig.jpg
http://img59.imageshack.us/img59/5945/casecornerbig.jpg
The pics are large to make it easier to see what it is like.
I will reply to this with other accessories.
Nice case! I've been looking for one for mine
Bluetooth dongle ....
Ok, here are the bluetooth dongles I bought on eBay. They plug in to any USB, worked perfectly on a Dell laptop with XP and an Asus laptop with Win-7. No extra drivers needed.
After installation, I just paired the A7 with the laptop. Then when browsing files on computer using Windows Explorer, you can right click a file and "send to". Choose the A7 and it sends quickly and painlessly!!
Great deal! Only $2.50 each and free shipping.
http://cgi.ebay.com/ws/eBayISAPI.dl...48984&ssPageName=STRK:MEWNX:IT#ht_1933wt_1139
GPS for A7
Here is the GPS receiver I bought on eBay. It is Bluetooth, paired with the A7 with no problem, worked fine.
I used bluetooth gps provider to turn the gps on and off. It is free on the market place.
I used GPS Status to verify the GPS functions. Worked great.
I need a good GPS program to use that has maps etc. and will work WITHOUT PHONE. Most of the programs only work if u use the phone function on the phone. A7 don't have that.
It cost me $40 on eBay.
Here is the link for the GPS:
http://www.holux.com/JCore/en/products/products_content.jsp?pno=227
and here is the Holux link:
http://www.holux.com/JCore/en/home/index.jsp
I wanted the 1200E, but won the 1200 on ebay. It works fine.
Anyone know of a good GPS software that has maps but doesn't need 3g or phone to work?
Do you know what chip is inside the gps receiver..
Mr.Pete2u,
Thanks for the information about the dongle. I just purchased on E-bay.
I do not see the GPS receiver that you mentioned. I really want to have that option for my tablet.
Is there a link?
Thank you so much for sharing this information.
Diania
I edited the gps post and added the links.
I am thinking of purchasing the GlobalSat BT-368i Bluetooth & USB GPS Receiver,
Works on all platform,
http://www.usglobalsat.com/bt368i/
acid123 said:
I am thinking of purchasing the GlobalSat BT-368i Bluetooth & USB GPS Receiver,
Works on all platform,
http://www.usglobalsat.com/bt368i/
Click to expand...
Click to collapse
I also looked at getting that one. I bid on several on eBay, and won the Holux. Let us know how it works.
copilot live works great and only 4.95 on market
ninetoes49 said:
copilot live works great and only 4.95 on market
Click to expand...
Click to collapse
I'll check out copilot live. Most of the programs that are "live" or similar i found need the phone to work. They use google maps and you need an ongoing data connection while driving - not a good option since the phone is left out of the A7.
GPS for A7
I got my bluetooth GPS receiver working with both Mapdroyd and Maps in my pocket. I have only been able to check my static position so far, but it was found quite quickly. Not sure how it will perform on the move.
These apps are available on one of the markets, not sure which one I got them from. Getjar, slideMe or the Appstore.
What I would like to try next is create a route, import to the map program for the gps to follow. Any ideas?
Also, anyone been able to mount the a7 in a vehicle?
Mrpete2u,
Thanks for adding the information.
Does this configuration work to give the map of where you are at that time? Are you tethering it to your cell phone via the Bluetooth dongle?
Regarding co-pilot, will that work without a tether to a cell phone? Thanks,
Diania
acid123,MrPete2u,
Are there differences in the two GPS systems other than one offers USB and Bluetooth?
Thanks,
Diania
How can you access it? It's
not available to me on the market...
CoPilot Live
The only version of CoPilot that I could find was the North Amaerica version on Amazon Appstore. Nothing shows up on Market. It was $19.99 and it works great with a Qstarz 818XT GPS receiver and BlueGPS.
Thanks, I'll check it out.
Hey there anyone,
I notice the elocity has a docking port... For what? I cannot find anything to dock it with.
okantomi said:
How can you access it? It's
not available to me on the market...
Click to expand...
Click to collapse
Try to google
rooCASE
Just bought a rooCASE for my wife. Fits perfect if you like it very snug. I checked the dimensions before I ordered it....
http://www.amazon.com/gp/product/B004HXO5FM
Related
There is a short review of the Targus Universal Wireless Keyboard on Geekzone . The unit works with either PocketPCs or PalmOS PDAs via the IR port. The article does not answer the number one question I have though: "Does it work with the XDA?"
Note the second picture in the article; Notice (1) the mouse, and (2) the adjustable IR xceiver. The built-in mouse seems pretty neat -- I don't know how useful it actually is, but if it eliminates the need to use the stylus when using the keyboard, that could be huge! Also, I would think that having an adjustable IR xceiver (2) would make IR operation with the XDA better because of the odd placement of the XDA's IR port.
This unit is $79.95 at my local Best Buy, and $49.95 with free shipping from Amazon.
Can anyone comment on the operation of this device with the XDA?
Donovan.
The keyboard is excellent. Mouse works great...lets you move around on the screen and click with a mouse pointer. Keyboard is nice and full sized so easy to type on. The arm does move to adjust to just above the IR port. Very responsive you would never know it was a IR keyboard.
I had a pocketop and sorry - it was just junk not to mention the driver for the XDA. Im running 2003 and love the keyboard. No problems at all. GO FOR IT.
Thx drj. This is just the feedback I was hoping to receive. I'm picking up one on my way home from work!
one thing I shoud mention. Go to Targus.com and download the latest driver for the Pocketpc.com Think the CD version is out of date.
Thx drj. I just spent an hour getting acclimated to my new Targus Universal Wireless keyboard. You are absolutely on point! This unit is amazing. The combination of near-full-size keyboard, "mouse" and function keys really enhances the PocketPC user experience. Even though I am not seeking it, this is very close to a desktop experience; what I am looking for is an accessory that will allow rapid text entry when I need to do a lot of it. I think I've found it. Thx for your input, it's much appreciated.
Donovan.
I wonder why at Amazon, there are only negative reports!! Is it as good as you guys say or should I believe the reports?
Targus has no driver for the XDA. Will the other drivers of the units offered, work with the XDA?
If somebody knows pls. reply.
THX
Gear
i just installed the pocket pc 2002 driver / ipaq
and it works great
what i DONT like about is... my ppc has the extended battery, and its too thick for that little hook to hold it.
what it needs is an angled mirror! like i saw on some other design... so that way, even if the IR handle DONT reach it, it will still reflect off the mirror.
but, its a wonderfull product, as close to a full size keyboard as u can get!
There is a driver for O2 XDA. You have to download it off targus.com.
It works great...no conflicts.
Well lets just say I bought a pocketop and it was JUNK. When they released the so called driver for the XDA it was very flakey, I had to hard reset my device to get it back to normal. If they fixed their drivers then maybe it would be an OK input solution. (not great though) But they have 3rd party contractors coding their drivers so no one on staff.
The Targus among other things has an adjustable arm that you move to just over your IR port. As I said have it running on my XDA and WM 2003 and no problems. I do love this keyboard and can take it with me when the XDA2 is here!
ntabikha said:
i just installed the pocket pc 2002 driver / ipaq
and it works great
what i DONT like about is... my ppc has the extended battery, and its too thick for that little hook to hold it.
what it needs is an angled mirror! like i saw on some other design... so that way, even if the IR handle DONT reach it, it will still reflect off the mirror.
but, its a wonderfull product, as close to a full size keyboard as u can get!
Click to expand...
Click to collapse
What about a sync cable?
Can you have this keyboard working with the device ands till have it attached to a sync/charge cable?
the problem with my current keybaord is I constantly plug it and unplug it in order to transfer test apps over etc.
..Chuck..
well.. with This particular model, yes!
its IR... the pda never have to physicaly connect to nothing!
infact... if u lay them both on a desk... it can be up to 2 feet away from the keyboard.. provided u have the IR transmitter and IR receiver on the pda facing each other.
thats why i was suggesting the mirror thingie... or maybe a bottle of scotch might act like a prizm and reflect the IR in all directions
I've seen these simple USB GPS receiver antennas that hook to a laptop for GPS duties so naturally I'm thinking why can't this be done for the nook. Ideally we would have a dual/split port so power could still be supplied at the same time.
I'd rather have this config since I don't like the idea of tethering to a GPS capable cell for privacy reasons and it ties up the cell too.
Why couldn't this be possible? Is it just a matter of the Nook recognizing the GPS antenna and being able to get a software package to recognize it?
Any ideas?
With CM7, and a bluetooth GPS reciever, this is no problem. We will never be able to build a GPS into the device, but we can get close enough...
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
KDOG2020 said:
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
Click to expand...
Click to collapse
Im not following, sorry.
I just ordered a "kit" for my NC actually - a car window mount, and a stand-alone BT GPS. I plan on attaching the the GPS to the window mount via velcro, and leave it in the car. You don't need USB at all (nor would it work, since our nook does not currently support usb host). Just get a BT module, and leave it in the car; connect it to the nook when you need it. done.
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
KDOG2020 said:
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
Click to expand...
Click to collapse
Ah, let me fill ya in then.
What i am talking about are standalone recievers - nothing more than a GPS and BT transmitter. No screen, no frills. Most have batteries that will last for weeks, and are small enough to store anywhere in the car when not in use. YOu can see a good selection here:
http://www.amazon.com/s/ref=nb_sb_n...eiver&keywords=bluetooth+gps+receiver&ie=UTF8
Hope that may give you some new ideas.
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
KDOG2020 said:
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
Click to expand...
Click to collapse
Now, i guess i cannot guarantee, but in theory, ANY BT gps should work with our system, since all GPS's transmit in the same standard. All you should need for software on the nook will be:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
Assuming my GPS arrives sometime soon, i will be able to give ya some first hand advice.
You will still need a data connection if you intend to use Google Maps for your GPS software.
If you want to use it without a data connection, you will need something like this:
https://market.android.com/details?id=com.alk.copilot.market.usa&feature=search_result
"maps stored on your phone, not downloaded"
Also note, Bluetooth range is very limited on the NC. My BT GPS has to be within 2 feet of the NC to connect.
That is true, a stand alone program is the best, but google will cache the maps if you pre-plan the route.
As for distance - with a car mounted GPS< you really don't need to worry about that - the GPS should be by the windshield anyway, so keeping it close to the nook isn't an issue..
What about this Google "Navigation" program that is on the nook? (the blue arrow)
KDOG2020 said:
What about this Google "Navigation" program that is on the nook? (the blue arrow)
Click to expand...
Click to collapse
You'd still need a data connection. The best probable solution would be to tether to a smartphone that has GPS - so the Nook has a data connection for the Google Maps and Navigation, and GPS data from the phone's GPS.
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
rogerdugans said:
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
Click to expand...
Click to collapse
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
I had trouble with some GPS apps.
I was able to use the GPS and data access on my Motorola Cliq to have GPS voice guided navigation.
http://forum.xda-developers.com/showthread.php?p=12076390
That is how I accomplished it.
If you have a hardware GPS, then you only need the 1 app, which is even easier, but I still recommend wifitether or barnicle for data access (you can download the maps for offline use if you plan ahead.)
colorado_al said:
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
Click to expand...
Click to collapse
I actually tried those apps to no avail, which is why I started looking for the other puck (not as accurate but easier to connect) and alternative solutions.
I actually had looked at all of the other (non- Google) nav apps for Android before to use with a now unused Droid (original) but found them all to be ... less than desirable for various reasons.
Note that I am NOT trying to discourage this project- it is possible, I am certain, but much like linux navigation software... lacking a certain "polish" if not functionality.
Hi, I'm thinking of getting a 7" tablet to install in my car, I'm not looking for anything super high spec as I'm literally just going to use it for mapping and playing music. That being said, the nook HD looks like a really good spec for the price..
I've just got a few questions
It doesn't have GPS, but I assume it will work using a bluetooth GPS once I've installed CM10?
I understand it uses a proprietary usb cable, how far does it stick out? Does anyone have a picture of it? This may be me only problem mounting it in dash as I wont be able to find a right angled one!
Yes, you can use a Bluetooth GPS puck. I haven't gotten Google Maps to work with it yet but I have gotten other programs to see it. A 3rd party GPS program should work with it. I'm still planning on testing that theory but to much family stuff has been going on right now to actually do it.
With the connector and the way the cable is wrapped right next to it it sticks out about an inch (just a little under that) from the bottom of the device. I'm pretty sure that to much pressure on that part of the cable will make is useless so you would have to make allowances for it. Also, it needs more power than a normal micro usb cable to actually make it charge. The AC adapter puts out 1 volt at 2 amps.
Got Sygic working today. Had to use this program to get it working though. https://play.google.com/store/apps/...?t=W251bGwsMSwyLDYsImRlLm1vYmlsZWouYnRncHMiXQ..
Other then that seems to work quite well. I should mention that I am on CM10.1.
I got Google maps to work fine with my phone using Bluetooth for gps and Wi-Fi for data.
Have to see up maps to accept debug data and use bluetooth gps programs on both devices
Sent from my Galaxy Nexus using xda app-developers app
Possibility of getting GPS working?
What are the chances of getting GPS working on the Fire? The info thread has a post saying the chip in it is a MediaTek MT8127 and links to the spec page which says it has GPS on the chip, as well as an FM receiver. Curious if it requires dedicated antenna connections that aren't there on the Fire, or if it's ready to go hardware-wise and just requires something on the software side? Would be pretty awesome to get it working and use these as a dedicated car tablet, especially now that cm12.1 is booting on it thanks to ggow, and the upcoming Black Friday $35 price.
GPS would require it's own antenna (plus a couple of supporting components) since it's a different frequency than wifi/bluetooth. So even if the chip includes GPS we can't use it.
Tho in your scenario of a dedicated car tablet you should be able to use a cheap usb GPS dongle. The fire has USB host.
Use TetherGPS Works great.
Tobb555 said:
Use TetherGPS Works great.
Click to expand...
Click to collapse
an app for GPS i would never have thought of such LOL
unfortunately i personally don't need GPS :silly:
Thanks though
I have old OBD2 v1.5 adapter. Chinese, big one. Which pairs with HU and works well.
I wish to buy new one, that call 'mini'. I know I have to look for v1.5 (as 2.1 is a crap) and with PIC18F25K80 chip.
But I read that even much of these new mini are PIC based, that have some strange Mac address like AA:BB:CC:11:22:33.
Anyone has experience with such adapters? Do they pair and work with Torque on our HUs?
If anyone is using such an 'mini' adapter, please post link to eBay/AliExpress where you purchased it. Will be very grateful (and it may help other people here, too, as many have issues pairing/using crap adapters).
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
PekeMM said:
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thank you for sharing. I was not considering USB option, but it sounds interesting.
I see you both the 'big' one (same as my old one). And they really work very good.
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving. Here is obe model I consider
Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
There are 2 models of these (not colours): old design with 2 PCB boards, and new one with just 1 board. I wonder if anyone has any of these?
pa.ko said:
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving.
Click to expand...
Click to collapse
:silly: I do not see the problem there as if you checked both links from my post you would see that I use extension cable that do not have issue with connector position. Mine is located right above gas pedal so I could not drive car normally with any OBD Adapter unless I used extension cable.
pa.ko said:
Here is obe model I consider Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
Click to expand...
Click to collapse
PIC is programmed micro controller and not actual ELM327 see https://www.elmelectronics.com/products/ics/obd/ and v1.5 nor v2.1 exist officially as they are clones and you should use https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier to test actual model and support.
Re which one: I ordered 6 different models and kept two that worked flawlessly with my car 1 was broken (got refund) and resold other 3 to get my money back.
PekeMM said:
I personally bought so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
How did you mod this?
gazenbeek said:
How did you mod this?
Click to expand...
Click to collapse
It is fairly simple MOD:
1. Soldered positive wire of lighter connector that have power only when Ignition is turned on.
2. Bought FLAT cable that I can easily cut the wires like in picture s-l1600.jpg
3. Cut Wire on pin 16 BAT power see ODBII%20Master%20Pinout.jpg
4. Connected wire that goes to OBDII to Positive wire I prepared in step 1
5. Connected OBDII to connector from FLAT CABLE
6. Connected USB to HU SINGLE USB CABLE
7. Tested if all works with Toque
8. Used cable ties to secure all cabling behind dashboard
and now I enjoy the all the diags on HU
PekeMM said:
so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
To change BATT to ACC, is that just so it's ' done properly'?
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
abbots said:
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
Click to expand...
Click to collapse
Glad I helped someone
abbots said:
To change BATT to ACC, is that just so it's ' done properly'?
Click to expand...
Click to collapse
Yes, it is safe no issues at all
abbots said:
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Click to expand...
Click to collapse
It is not the problem that it drains a ot but all small drains can pile up so eventually you have a problem. I have park mode security enabled on my dashcam system so it drains some, OBDII can drain a littl, but it is known that in some cases keeps ECU awake that can drain a lot due teh number of sensors it keeps awake also
abbots said:
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
Click to expand...
Click to collapse
All was ECU side due the different pinouts see my pics, I have seen in the past several USB -> COM chips that are not supported on Android due the OEM build and specific drivers like some factory that are not recognized on laptop till you install their licensed software (Usually JUNGO Based Drivers).
---------- Post added at 00:24 ---------- Previous post was at 00:20 ----------
abbots said:
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
Click to expand...
Click to collapse
Only if you got specific cables with canbus decoder (black little box). even then USB OBDII is used to diagnostic and clear codes. I use Toque 1.83 and it works on one unit that v1.52 didn't worked with. Usually ELM v1.5 works better than v2.1
thanks! I have now got USB OBD unit 1.5 (still need splitter/extender), tried yesterday with Torque as well as with Palmer's DashCommand:
it kinda worked - during first trip, 45min, Torque app crashed twice or more, worked after restart, on return trip, DashCommand also choked once or twice, thenm I relaized, as fuel tank level is not reported, unless I run app 100% of the time, fuel consumption won't be correct - and, realsiticall, I need TomTom on the screen more than gauges....
I see there are OBD spliters that 'allow' two or three OBD devices plugged in, wouldn't you know, is it OK to split/use multiple OBDs ?
like, I have TomTom 'Curfer' OBD data logger - just logs 'quality of driving", thoiught to get splitter to log data, AND, if so desire, call gauges on screen ?
thanks for explaing CANBUS!
do you use TPMS tyre pressure units, if so, which ones ? my radio has an app to read such, wonder if it's worth it ?
I have connected my USB OBD. Torque not recognised device. How to check that Scanner is properly installed on android system?
OBD scanner is generic just like this:
https://www.amazon.co.uk/ELM327-USB-Interface-Diagnostic-Scanner/dp/B00IWLLX1Y
BTW I have MTCE with android 8.0 with KLD MCU.
Torque lite ain't work with android/usb, only in bluetooth mode.
I have torque pro so there is no problem there.
Any way problem solved. Bought Bluetooth version.