I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
That mode is also one type of download mode. Flash a stock rom like roto jmi with repartition.
i was DL new ROM to and my pc died and brickedmy P1000 and i can only see the phone ! PC sign if i have it plugged into electricity and ODIN doesnt recognize it if i plug it in to intall official 2.3.3.
what should i do?
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
omr911 said:
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
Click to expand...
Click to collapse
Thanks for your instruction ! You saved my life
help pls..from asia Kuala Lumpur
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
if you can't boot into download mode, chuck your tab into the rubbish bin or use it as a paperweight. its a perma brick, nuff said.
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
Plug it in the mains and let it sit there for a day... Then try again.
I wonder how come ppl 'unplug-by-accident'... Ever heard of concentration, awareness etc ... ?
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
If u have warranty,claim it at Sammy service center telling them nothing about ur flashing business.
If not,read these threads and try one by one.
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
http://forum.xda-developers.com/showthread.php?t=1214955
If nothing works,still try sammy service center.[Ur tab is worth of that service cost, isn't it?]
@IcedCube
What u told could have been told in a gentler way,couldn't it?
It seems that u have acquired ur Tab only yesterday and here u r giving ur "Valuable 2 cents" at a newbie.
BTW, our tab cannot be Hard bricked that easily and even PC-triangle-Device screen as well as a Blank screen also r Download modes for our Tab.
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
unubtanium said:
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
Click to expand...
Click to collapse
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
dirlan2001 said:
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
Click to expand...
Click to collapse
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
unubtanium said:
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
Click to expand...
Click to collapse
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
dirlan2001 said:
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
Click to expand...
Click to collapse
Thanks for the help and now i will go out on the big world wide web and see if can learn about Google SDK and basic ADB support..
And when that is done lets hope it will be on long enough to receive and execute an command like this one: adb reboot download or something like that..
If no go there i will send it it of for JTAG
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
Mkay learning done:
And it all points to JTAG.
Because adb do not find the device, and i think that is becuase it turns it selv off verry quickly.
Command:
C:\Program Files\Android\android-sdk\platform-tools>adb reboot download
error: device not found
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
unubtanium said:
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
Click to expand...
Click to collapse
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
dirlan2001 said:
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
Click to expand...
Click to collapse
Thanks for pounding in to my head that it is not bricked and that there are a chance to get it in to download mode... Now i am going to make this usb thing happen..
"i Have Odin ready with all the files selected and ready to push tha button"
My Galaxy tab (Korean Made) GT P1000 "GOON TOO SOON"
Hello;
I used Odin to mistakenly flashed my Samsung galaxy tab GT1000 with wrong firmware; I end-up with black screen no boot. Odin was able to detect the device after 3 times; after the third flash Odin can not detect the device any more. all efforts proved abortive in other to connect the device back. If I power the device it will show flash light and on with no display on the screen after 5 seconds the light will off but the device will still ON with blank screen I can not get my device to download mode even if I try to it will still power up in blank screen. so please what is your advice on this mess?
Thanks.
nuti1025 said:
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
Click to expand...
Click to collapse
Connect the usb, HOLD VOLUME UP + DOWN , then hold POWER BUTTON for 5 secs ... Let it reboot to recovery. Reboot the phone.. And reflash -_- ...I've done this many times, but not sure if it works to u
Related
Hi, i had one phone i9000 that was not going into recovery or download mode. SO, i tried flashing Aries_P-SBL.tar.md5 as PDA to enable recovery mode. I then got failed message and now phone is stuck on "PC ! Phone" logo. It wont go into recovery or download mode. Help
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
lcgmadeira said:
Take the battery out, wait a little and see if it will boot up,if not, do the same again but try to turn it on while connected to pc....
Click to expand...
Click to collapse
I think i need jig cable. DO you know how to make it or where to buy it from online?
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
lcgmadeira said:
i dont know about the cable, sorry. but the same thing append to my first galaxy and it came back on doing what i said on previous post, i had about half hour trying and it worked...
Click to expand...
Click to collapse
Ok, will try again thanks
Hi, im off to making my own jig cable. Just need some advice after getting download mode should i first try repairing recovery mode by flashing Aries_P-SBL.tar.md5 or should i direct try flashing XXJPU via ODIN?
How did you resolve this i have the same here with my girlfriends samsung galaxy s. I can't come in download and recovery moe anymore. Pls have same one a solution?
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
cgingermany said:
whats crazy for is when this happened Odin still recognized my phone(there was a com 3 showing) so i decided to hit start and it actually worked for me.
Click to expand...
Click to collapse
This worked for me as well. I never thought to try the download anyway with that screen showing.
Thanks for the tip.
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Up. Help me.
neilgoco said:
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Click to expand...
Click to collapse
Sometime the phone discharges have u tried starting op in 'download mode' while charging and reinstalling Froyo again using Odin?
Yesterday I have received my sgm mobile and i had exactly the same problem with the same aplication. The mobile seems to be dead it is not detected by the pc and can't be charged. Can anybody help us ?
i have same problem with my mini today, i upgraded to 2.34 because of wi-fi, it won't connect and everything was allright.
then i downgraded to 2.2 wih 2.33 ops and odin 4.38, but then my phone it doesn't even turn on. i mean no recovery mode, no downloading mode, nothing. it don't turn on at all and odin don't detect. what to do?
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
Can you post a link to that specific video? Thanks.
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
By the way, is the USB Jig for SGS the same size with the USB slot of the Galaxy Mini? Does the USB Jig works on Galaxy Mini? Is this tried and tested on this pgone? Sorry for too many questions. Thanks.
---
I am here: http://maps.google.com/maps?ll=14.728119,121.029307
Go a google search with "unbricking galaxy s jig"
It can be use for xperia mini too.
Gudluck!
It might be,battery suddenly empty. Its hard for phone to brick.Charge ur phone 1st at full... And choose the right baseband according rom prequistid. I b4 this rooted and installing CWM on this galaxy mini and the phone at samsung logo or samsung galaxy mini logo.
As on my condition,follow guide that been explained. If u have flashed the CWM, REBOOT. Then at samsung logo,press volume down,then u can access CWM. To avoid other probs, flash it with cyanogen mod. Or it maybe cant be loaded.
As far i concerned, for galaxy mini got 2 type of recovery. That is,
Enchanced recovery
&
Tass Recovery
For me,choose tass recovery.
Sent from my HTC Vision with Doubleshot Rom
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Did I get some of the previous posts about using usb jigs for SGS on samsung galaxy GT S 5570 right??
What software is required?
Some USB jigs for SGS 900XX (as in 9000i 9003i etc) are available on line for between INR 250 to 600 (1 U$D is approx 49 INR).
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
The best thing is to give it to the service center
I agree, I should have made it
armanke13 said:
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
Click to expand...
Click to collapse
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
stepph said:
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
Click to expand...
Click to collapse
cud be the firmware u used or somethin?
roofrider said:
cud be the firmware u used or somethin?
Click to expand...
Click to collapse
tried two official for my region from 'checks fus downloader'...
stepph said:
tried two official for my region from 'checks fus downloader'...
Click to expand...
Click to collapse
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
roofrider said:
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
Click to expand...
Click to collapse
i'm behind a firwall and cannot acces... i'll try tonite from home...
and let you know...
Not working....
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Dear Arsalan,
I face same problem with my galaxy mini and try to use your procedure for ON my galaxy mini but I not successful please help me.
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom
First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.
tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
What about a Tab P1000N? What can be done with that one?
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.
You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:
hi, i flashed my galaxy tab with euro modem to enable the call
I rooted it with superoneclick and used odin to flash
after flashing, it got stuck in t-mobile logo and downloading screen
I saw a tread telling me to wall charge for 4 hours, so i did it.
now i cant even turn it on. all buttons are unresponsive..
can anyone help me with this?
bump
bump
skazyjae said:
bump
Click to expand...
Click to collapse
did someone really told you to wall charged when you had dowload screen? that's so uncharacteristic of XDA users.
nothing on your screen is not necessarily bricked.
find and download rom/firmware for t-mobile on ur pc.
start odin on ur pc.
press the power button on ur tab for at least 5secs.
connect ur tab to ur pc.
see if odin can detect your tab
if you can detect your tab, go ahead flash with the rom you just downloaded. No need to do repartition.
once done, reboot and see if it is fixed.
skazyjae said:
hi, i flashed my galaxy tab with euro modem to enable the call
I rooted it with superoneclick and used odin to flash
after flashing, it got stuck in t-mobile logo and downloading screen
I saw a tread telling me to wall charge for 4 hours, so i did it.
now i cant even turn it on. all buttons are unresponsive..
can anyone help me with this?
Click to expand...
Click to collapse
yappoe said:
did someone really told you to wall charged when you had dowload screen? that's so uncharacteristic of XDA users.
nothing on your screen is not necessarily bricked.
find and download rom/firmware for t-mobile on ur pc.
start odin on ur pc.
press the power button on ur tab for at least 5secs.
connect ur tab to ur pc.
see if odin can detect your tab
if you can detect your tab, go ahead flash with the rom you just downloaded. No need to do repartition.
once done, reboot and see if it is fixed.
Click to expand...
Click to collapse
yes the told me ti drain the battery and charge for four hours. thats like replacing battery
ill try that and ill post again
.
okay, so I tried to try that method, but my computer doesn't recognize galaxy at all. I can't even get into the download mode nor the recovery mode.
I take it that you managed to revive your tab?
priyana said:
I take it that you managed to revive your tab?
Click to expand...
Click to collapse
yes, im not sure how i did it, but i did it. i messed with it for hours and i could get into dl mode