Database Develop

Stock ROMs

Guys, even the ROM customization has already started I think that very useful would be to have stock ROM backup for the warranty claiming cases. I found site with links to different SGN stock ROMs. I have not installed any of them so be careful.
Here is the site:
http://www.sammobile.com/forumdisplay.php?f=57

Thanks guy! downloading HK official ROM. any clue on how to install?

Download service Manual from same page, that will show you detail

dr.ketan said:
Download service Manual from same page, that will show you detail
Click to expand...
Click to collapse
thanks! will do. Hopefully will not cause flash counter increment and triangle.

no it doesn't as it is samsung stock. had no problems flashing it via odin.
lokto7 said:
thanks! will do. Hopefully will not cause flash counter increment and triangle.
Click to expand...
Click to collapse

Hello,
What's naming conviention for firmwares?
is KJA newer or older than KJ4?
*CodePages links on sammobile are not working.
Thx

can someone start up a Note wiki page here on xda..
It needs someone with an obsessive attention to detail, and all consuming passion to list and catalogue everything, rom wise especially!
(counts me out)
that way we can point people to it easily..

lokto7 said:
Thanks guy! downloading HK official ROM. any clue on how to install?
Click to expand...
Click to collapse
Use Odin to flash the ROM.
By the way, can't figure out the country code. How do I know which rom is HK ROM?
EDIT: The country code page is here:
http://www.sammobile.com/showthread.php?t=36. Now I can find the Hong Kong ROM. Should be N7000ZSKK1

New one Stock 2.3.6
new one 2.3.6 German and ......?
Hotfile.com: 1-CLICK Dateihoster: N7000XXKK9_N7000OXAKK9_DBT.zip
password: samfirmware.com
for you Chainfire for Mod as Ch-Root 5 Kernel Modding
saludos y Gracias

damenchoy said:
Use Odin to flash the ROM.
By the way, can't figure out the country code. How do I know which rom is HK ROM?
Click to expand...
Click to collapse
I would say N7000ZSKK1 .... I have tried to flash custom version attached somewhere here at forum ... and successfully

Just finished the painfully slow download of the Hong Kong stock ROM ZSKK1.
Now I've uploaded to UploadKing for your convenience
http://www.uploadking.com/IRK2FGRBW4
md5: 21971e2e28833d61be0f6e6d205b033d SGN-Stock_ROM-N7000ZSKK1.7z
I have just flashed PDA and CSC. My SGN is Hong Kong version (yep, I've screwed up some system apps so I need to restore to stock .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Link provided on the first post isn't working. Any others, please share.

guru_root said:
Link provided on the first post isn't working. Any others, please share.
Click to expand...
Click to collapse
Its unter maintenance, so we have to wait for a few days

emptynick said:
Its unter maintenance, so we have to wait for a few days
Click to expand...
Click to collapse
It works. Just try http://www.sammobile.com/forum/showthread.php?t=27 instead. All the best

perfsthepiper said:
It works. Just try http://www.sammobile.com/forum/showthread.php?t=27 instead. All the best
Click to expand...
Click to collapse
Thanks for this

i just dl from the sammobile for my ROM. when i extract, i only saw 1 file which is
N7000DXKK1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5
hw do i flash this using odin?

warboy85 said:
i just dl from the sammobile for my ROM. when i extract, i only saw 1 file which is
N7000DXKK1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5
hw do i flash this using odin?
Click to expand...
Click to collapse
Use mobile odin..Download it from market
Sent from my GT-N7000 using xda premium

razorpixel said:
Use mobile odin..Download it from market
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
This type use mobile odin? Will it increase counter?

warboy85 said:
This type use mobile odin? Will it increase counter?
Click to expand...
Click to collapse
Mobile odin don't increase the counter

andromeda1968 said:
Mobile odin don't increase the counter
Click to expand...
Click to collapse
Dont worry about counter .
Use this guide all the way to rooting :
http://jjpda.blogspot.com/2011/11/n7000-how-to-flash-n7000zskk1-236.html
Than go here http://shortfuse.org/?page_id=2 and download superoneclick , run it with your phone connected , change " exploit to zergrush .
my counter has not changed ( or maybe it's reset this is official rom )

[ROM] Xperia arc : Icecream Sandwich Diet [FW:562]

[ROM] Xperia arc : Icecream Sandwich Diet [FW:562]
GSM
WIFI
Bluetooth
Pre-Root
Auto APN set
Remove some apps
Add some apps (TitaniumBackup,DSPManager)
DOWNLOAD
ROM
DOWNLOAD LINK : http://pilotsky.iptime.org/XPERIA/Arc/LT15i 4.1.A.0.562 [1255-1753]/XDA/
MIRROR : http://www.mediafire.com/?mrlg57f8mshyr14
KERNEL
ICS Beta DOOMKERNEL : http://forum.xda-developers.com/show....php?t=1520654
ICS Beta Stock Kernel with CWM : http://forum.xda-developers.com/show....php?t=1514849
Warning : This will Remove All user Data, and format System Partition
HOW TO
1. Download LT15i_4.1.A.0.562_Diet_1255-1753.zip and LT15i_4.1.A.0.562_1255-1753.tft
2. Install LT15i_4.1.A.0.562_Diet_1255-1753.zip with CWM
3. And Install LT15i_4.1.A.0.562_1255-1753.tft with Flashtool (above 0.6.7.0)
4. Enjoy!!
Special Thanks to.
Sony (Official Release), Doomlord (install script), velislav25 (ftf files)

Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You are fast thanks 4 this

deleted post

MIRROR : http://www.mediafire.com/?mrlg57f8mshyr14
Mirror added..

is there a file called uxpnxtlockscreen.apk in this ROM?
Sent from my X10S using xda premium

championswimmer said:
is there a file called uxpnxtlockscreen.apk in this ROM?
Sent from my X10S using xda premium
Click to expand...
Click to collapse
no..

kes4817 said:
no..
Click to expand...
Click to collapse
oh...ok thanks...and does the arc official ics have lockscreen music and gallery controls like xperia s?
(I'm sorry about these stupid questions here...but i'm a x10 user and i work on porting xperia s and arc roms onto x10,.so i was curious to know)
Sent from my X10S using xda premium

Can i install it on an unlocked unbranded lt18a with a locked bootloader??
Thanks ss
Sent from my LT18i using XDA

how long does it take to boot? mine took forever, 10 minutes already (LT15i, unlocked bootloader).

Don't work for me, i can't flash ftf file
14/058/2012 17:58:03 - INFO - Ending flash session
14/058/2012 17:58:03 - ERROR -
14/058/2012 17:58:03 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
p/s: install zip file, flask ftf ok, but get boot loop

Wifi problem..keeps connecting and disconnecting all the time..anyone git the same thing?

omarfaieq007 said:
Wifi problem..keeps connecting and disconnecting all the time..anyone git the same thing?
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showthread.php?p=21406675

Here my arc
http://www.youtube.com/watch?feature=player_embedded&v=lqPEexF7c-U

Thanks for your great job, your install work fine on Xperia Arc S
I noticed that you deleted Google Music Play from your ROM...
I found it here
Maybe it will be helpfull for someone who is using it like me.
btw. start/pause/forward buttons are working ok under screenlock

So does this work on the LT18i also do u have the bad process for installing through flashtools like the original

simz1987 said:
So does this work on the LT18i also do u have the bad process for installing through flashtools like the original
Click to expand...
Click to collapse
It works fine with DooMKernel #4 on Xperia Arc S (1.4GHz)
Now, I can see that it is LT15i in phone info - I'm not shure what was before.
No errors during flashing, clear install.

I just flash the zip file with DoomKerneL recovery and my LT15i boots on ICS. Thank you for the archive.

It runs very good. I don't like that it has a lot of sony appl that I don't need. So, I had to uninstall them

simz1987 said:
So does this work on the LT18i also do u have the bad process for installing through flashtools like the original
Click to expand...
Click to collapse
I think what the OP tried to do is to flash /system and /data via CWM (this step is suspectedly failed via flashtool). 2nd, step is flashing the rest of kernel.sin, baseband etc via flashtool. In my case, it will stuck at Sony logo.
Then I flashtool the full official ftf, and excluded flashing system.sin - and it works that way.

[ROM] [JB][V20A]LG 4X HD deodexed and zipaligned by S3V3N

Hi, I would like to offer you the original JB (V20A) with made- deodexed and zipaligned
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For those who do not know what is meant by these two terms, please do not ask unnecessary questions in the topic
All the answers we have in the Forum.
I will say briefly that there is a gate gives us the full modification to recently made ​​available to the network v20a
Reupload ROM with improved, operating keyboard (pure stock)
Download : Dev-Host - LG_4X_HD_v20a_deodex_zipaling_by_S3V3N.zip - The Ultimate Free File Hosting / File Sharing Service
Amendment (TaskManager) via CMW : Dev-Host - LG_4X_HD_v20a_deodex_zipaling_by_S3V3N_patch.zip - The Ultimate Free File Hosting / File Sharing Service

awesome rom, will download and report back.

is it containing the deodexed weather widget apk too?

Some new feedback about this rom ?

fmgeraldine said:
Some new feedback about this rom ?
Click to expand...
Click to collapse
i've downloaded and i think some apks missing...
for example the weather widget

djtheball said:
i've downloaded and i think some apks missing...
for example the weather widget
Click to expand...
Click to collapse
what else is missing?

WeatherThemebin.apk
WeatherMultiCPbin.apk

What are the prerequests.
Installation steps please.

Tnx for the rom! Will try soon.
Sent from the Supreme LG-P880 4xHD

lkswrp said:
What are the prerequests.
Installation steps please.
Click to expand...
Click to collapse
I don't know what you mean with prerequests, but if you mean something like (pre)requirements I would say it's like
A installed 20A firmware
Root
Unlocked Bootloader
Installed CWM.
How to install should be like any other rom atm:
Place it on your internal sd card
Boot into CWM recovery
Choose something like "install zip from internal storage"
Choose the downloaded zip
Install it and on next reboot you will have a deodexed and zipaligned V20A
I take no warranty to these steps, but I think it should work. I would be glad if somebody could confirm these steps...

i tried to install it via cwm and after phone stays in lg logo.now im reflashing v20 euroopen,fix it please

has anybody else tried to flash this via cwm???

come on men suport your them or else delete it

I flashed it with cmw not the touch version. Working great.
Sent from my LG-P880 using xda premium

what do u mean saying "not the touch version"?dd u made before a wipe data ? cause i made it and after the flash the phone stucks on lg logo

palalos81 said:
what do u mean saying "not the touch version"?
Click to expand...
Click to collapse
He means the version of CWM - there is a touch and a non-touch version of it

The reason this won't boot is it doesn't have boot included, you need to have the same v20a its based on installed, this works much like the deodex for ICS where it only modifies the /system partition. Just look inside the zip, no boot.img!
Sent from my rooted P880

And what can i do to fix the boot problem?

palalos81 said:
And what can i do to fix the boot problem?
Click to expand...
Click to collapse
Reading posts above may help...
This ist NOT a complete ROM. First you have to flash a Stock JB Rom. After that be shure unlock is working CWM Recovery is installed. Then you can flash the deodexed one...

Fladder72 said:
Reading posts above may help...
This ist NOT a complete ROM. First you have to flash a Stock JB Rom. After that be shure unlock is working CWM Recovery is installed. Then you can flash the deodexed one...
Click to expand...
Click to collapse
here's good program to do the job

[Q] What are firmwares, CSC, kernels etc..

Hi, I'm planning on flashing a custom rom and I don't know a thing about customization, it would be greatly appreciated if anyone could explain those things? Thanks! :fingers-crossed:

raziel54 said:
Hi, I'm planning on flashing a custom rom and I don't know a thing about customization, it would be greatly appreciated if anyone could explain those things? Thanks! :fingers-crossed:
Click to expand...
Click to collapse
very vague question so difficult to provide you with an answer
how ever
have a read through the forums and you will learn about what those are and how to flash them and how they work together

Sorry, just a newbie here, but thanks for your reply.
Can I ask you where I could get this stock rom? I am planning on getting CM11 but I wanted to have a contingency plan first.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I8190 using XDA Free mobile app

raziel54 said:
Sorry, just a newbie here, but thanks for your reply.
Can I ask you where I could get this stock rom? I am planning on getting CM11 but I wanted to have a contingency plan first. View attachment 2732544
Sent from my GT-I8190 using XDA Free mobile app
Click to expand...
Click to collapse
You can get original stock ROMs from : sammobile.com/firmware
Type on dailer *#1234# to see your current AP, CSC and MODEM version. Notice or note your AP,CSC and MODEM version (you need it if you want your original firmware back)
If you want your original stock ROM back then go to http://www.sammobile.com/firmwares/2/ type your noticed version in the fields (PDA, CSC, MODEM) and download it. done!
Check Screenshot!
Note : you need a SamMobile account for downloading firmwares

Thanks! One more question, I have read that the kernel also changes when I flash CM11, if I would like to revert to Stock do which file is the kernel? Is it the PDA, CSC or Modem? I'm now downloading my stock rom from sammobile thanks to you!

raziel54 said:
Thanks! One more question, I have read that the kernel also changes when I flash CM11, if I would like to revert to Stock do which file is the kernel? Is it the PDA, CSC or Modem? I'm now downloading my stock rom from sammobile thanks to you!
Click to expand...
Click to collapse
In PDA
if you install a custom recovery example TWRP or CWM then you're able to backup your current Stock ROM and safe it on your PC, laptop or external SD card till you want it back . If you want your Stock ROM back then you can simple restore it via custom recovery
Note : a backup of the Stock ROM take very often more than 2GB!
Good luck with flashing

Thanks! Does installing cwm requires rooting?
Sent from my GT-I8190 using XDA Free mobile app

Bro, I just rooted my phone and installed twrp, it came with busy box with smart install in it, what does it do?
Sent from my GT-I8190 using XDA Free mobile app

raziel54 said:
Bro, I just rooted my phone and installed twrp, it came with busy box with smart install in it, what does it do?
Sent from my GT-I8190 using XDA Free mobile app
Click to expand...
Click to collapse
please make use of the search tools before posting
all of your questions can be answered if you search for them

Flashtool support for XZ2

Hi, anyone knows if the XZ2 is supported by flashtool? Is it possible to debrand it? Or is there some other option available like it was for XZp and XZ1 (newflasher)?

Same question. I bought phone from ebay and its in some kind of demo mode. ffs

ufo56 said:
Same question. I bought phone from ebay and its in some kind of demo mode. ffs
Click to expand...
Click to collapse
If it is in demo mode try this code *#*#73556673#*#*

It's not yet supported, but will be.
https://forum.xda-developers.com/xa2-ultra/help/xa2-xa2-ultra-create-fsc-script-t3764804

Newflasher v11 fully functional on 2018 devices -> https://forum.xda-developers.com/cr...ewflasher-xperia-command-line-t3619426/page78 , FlashTool need some small modification to get support for 2018 models, hope my git save time @Androxyde for making similar update to FlashTool.

Newsflasher 11 does work (thanks!) but make sure you turn of driver signing enforcement in Windows before you try it - I struggled to get it working until I did this. I copied the replacement firmware without any .ta files.

munjeni said:
Newflasher v11 fully functional on 2018 devices -> https://forum.xda-developers.com/cr...ewflasher-xperia-command-line-t3619426/page78 , FlashTool need some small modification to get support for 2018 models, hope my git save time @Androxyde for making similar update to FlashTool.
Click to expand...
Click to collapse
thanks a lot,
so can i just put the newflasher exe to the firmware folder and start it or have i to put something else to the folder or delete something from the folder ?

Unpack partition.zip to partition folder and You are good to go. Newflasher won't do it for You.

ch3mn3y said:
Unpack partition.zip to partition folder and You are good to go. Newflasher won't do it for You.
Click to expand...
Click to collapse
which partition zip? where do i find it? in the fw folder that i downloaded there is already a partition folder in there whit one xml and 3 sin files... why newflasher won´t do it ?

If You have folder already than You don't have to unpack anything You are good to go.
I meant that Newflasher won't unpack the zip for You. However as You don;t have one, that there is no problem.

ch3mn3y said:
If You have folder already than You don't have to unpack anything You are good to go.
I meant that Newflasher won't unpack the zip for You. However as You don;t have one, that there is no problem.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that´s what i have in the fw folder within the partition folder..

Yep. That's how it should be.

ch3mn3y said:
Yep. That's how it should be.
Click to expand...
Click to collapse
ok, so i put in the fw folder just the newflasher exe and then i start it? On the XZp i had to move some other file from the newflasher zip too... now not anymore?

Only .exe if You are using Windows. And as I remember older versions there were always 5-7 files (except v10 test versions), but only one was used - .exe for Windows other for Linux and Android (so not needed by Windows).

flashed fw no brand with newflasher on my XZ2, everything is fine!

sladluk said:
flashed fw no brand with newflasher on my XZ2, everything is fine!
Click to expand...
Click to collapse
Which model do you have & which (model) firmware did you flash?
Also, do you have VoLTE/Wi-Fi Calling/Video Calling options available in your settings?
Also, is there any notable difference in what you had, before vs after (notably, the above-mentioned & otherwise)?
TIA.....
Sent from my Sony H8296 using XDA Labs

KOLIOSIS said:
Which model do you have & which (model) firmware did you flash?
Also, do you have VoLTE/Wi-Fi Calling/Video Calling options available in your settings?
Also, is there any notable difference in what you had, before vs after (notably, the above-mentioned & otherwise)?
TIA.....
Sent from my Sony H8296 using XDA Labs
Click to expand...
Click to collapse
I have the model H8216 (XZ2) and i flashed the Customized_IT version (no brand) because i bought the phone from an operator and it has brand fw installed. I didn't found any settings for volte, it was there on the operator fw. I like the customized because the updates coming every month and it is without operators bloatware... And often on operator fw there are bugs and other problems...

Is there any chance that someone will do the exact instructions on how to do it? I also have software from the operator

@ko8ric
Check this one: http://www.xperiablog.net/2018/01/2...-firmware-for-xperia-xz-premium-xz1-and-more/

Hi Sladluk. i am Italian sorry for my english... i have a xz2 brand tim... newflasher dosen't work... please help me for flash no brand