Hi, anyone knows if the XZ2 is supported by flashtool? Is it possible to debrand it? Or is there some other option available like it was for XZp and XZ1 (newflasher)?
Same question. I bought phone from ebay and its in some kind of demo mode. ffs
ufo56 said:
Same question. I bought phone from ebay and its in some kind of demo mode. ffs
Click to expand...
Click to collapse
If it is in demo mode try this code *#*#73556673#*#*
It's not yet supported, but will be.
https://forum.xda-developers.com/xa2-ultra/help/xa2-xa2-ultra-create-fsc-script-t3764804
Newflasher v11 fully functional on 2018 devices -> https://forum.xda-developers.com/cr...ewflasher-xperia-command-line-t3619426/page78 , FlashTool need some small modification to get support for 2018 models, hope my git save time @Androxyde for making similar update to FlashTool.
Newsflasher 11 does work (thanks!) but make sure you turn of driver signing enforcement in Windows before you try it - I struggled to get it working until I did this. I copied the replacement firmware without any .ta files.
munjeni said:
Newflasher v11 fully functional on 2018 devices -> https://forum.xda-developers.com/cr...ewflasher-xperia-command-line-t3619426/page78 , FlashTool need some small modification to get support for 2018 models, hope my git save time @Androxyde for making similar update to FlashTool.
Click to expand...
Click to collapse
thanks a lot,
so can i just put the newflasher exe to the firmware folder and start it or have i to put something else to the folder or delete something from the folder ?
Unpack partition.zip to partition folder and You are good to go. Newflasher won't do it for You.
ch3mn3y said:
Unpack partition.zip to partition folder and You are good to go. Newflasher won't do it for You.
Click to expand...
Click to collapse
which partition zip? where do i find it? in the fw folder that i downloaded there is already a partition folder in there whit one xml and 3 sin files... why newflasher won´t do it ?
If You have folder already than You don't have to unpack anything You are good to go.
I meant that Newflasher won't unpack the zip for You. However as You don;t have one, that there is no problem.
ch3mn3y said:
If You have folder already than You don't have to unpack anything You are good to go.
I meant that Newflasher won't unpack the zip for You. However as You don;t have one, that there is no problem.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that´s what i have in the fw folder within the partition folder..
Yep. That's how it should be.
ch3mn3y said:
Yep. That's how it should be.
Click to expand...
Click to collapse
ok, so i put in the fw folder just the newflasher exe and then i start it? On the XZp i had to move some other file from the newflasher zip too... now not anymore?
Only .exe if You are using Windows. And as I remember older versions there were always 5-7 files (except v10 test versions), but only one was used - .exe for Windows other for Linux and Android (so not needed by Windows).
flashed fw no brand with newflasher on my XZ2, everything is fine!
sladluk said:
flashed fw no brand with newflasher on my XZ2, everything is fine!
Click to expand...
Click to collapse
Which model do you have & which (model) firmware did you flash?
Also, do you have VoLTE/Wi-Fi Calling/Video Calling options available in your settings?
Also, is there any notable difference in what you had, before vs after (notably, the above-mentioned & otherwise)?
TIA.....
Sent from my Sony H8296 using XDA Labs
KOLIOSIS said:
Which model do you have & which (model) firmware did you flash?
Also, do you have VoLTE/Wi-Fi Calling/Video Calling options available in your settings?
Also, is there any notable difference in what you had, before vs after (notably, the above-mentioned & otherwise)?
TIA.....
Sent from my Sony H8296 using XDA Labs
Click to expand...
Click to collapse
I have the model H8216 (XZ2) and i flashed the Customized_IT version (no brand) because i bought the phone from an operator and it has brand fw installed. I didn't found any settings for volte, it was there on the operator fw. I like the customized because the updates coming every month and it is without operators bloatware... And often on operator fw there are bugs and other problems...
Is there any chance that someone will do the exact instructions on how to do it? I also have software from the operator
@ko8ric
Check this one: http://www.xperiablog.net/2018/01/2...-firmware-for-xperia-xz-premium-xz1-and-more/
Hi Sladluk. i am Italian sorry for my english... i have a xz2 brand tim... newflasher dosen't work... please help me for flash no brand
Related
Hello
Flashtool can be downloaded on the Flashtool Homepage (on Installation tab)
As Flashtool was originally developped for X10, you can find a lot of information on the Original X10 Flashtool thread
Major new feature : Fastboot toolbox for 2011 line devices.
Major update for 0.6.8.0 : Ability to now install CWM from Flashtool on locked bootloader.
Fastboot now works fine under linux
Please post fastboot issues here in this thread
If ever you want to setup an eclipse environment for Flashtool, you can check this thread
Flashtool does not recognize the decrypted FW.
I downloaded the decryptd FW for the Arc - extracted the files and copied it to the firmware folder of the flashtool (with Folder inside and without folder inside (.sin files directly to "firmware" folder)).
Started flashtool, pushed Flash, but no FW is available. Maybe I have to convert the .sin files in one .ftf file, but how?
Good initiative
Will follow this thread closely and hope for it being completely rooted before release
UserX10 said:
Flashtool does not recognize the decrypted FW.
I downloaded the decryptd FW for the Arc - extracted the files and copied it to the firmware folder of the flashtool (with Folder inside and without folder inside (.sin files directly to "firmware" folder)).
Started flashtool, pushed Flash, but no FW is available. Maybe I have to convert the .sin files in one .ftf file, but how?
Click to expand...
Click to collapse
To create ftf file from your sin files, use the Advanced->Bundle creation wizard
Jozinek said:
I try on my XPERIA Arc and root is not working. All seem to be ok, but after restart no superuser and no root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Can you set the flashtool to debug mode ? (Help->Log Level->Debug) and try again, then send me the log file ?
I'm not an expert, but from that log it looks like it'll be a while before the new phones are rooted, looks like they can't be rooted in the same way as the previous SE Droids!
Jozinek said:
yes, i can. Log file in attachment.
Click to expand...
Click to collapse
Thanks
Actually yes, the exploit does not work on Arc device :
20/059/2011 15:59:24 - DEBUG - stdout :Failed to set prot mask (Inappropriate ioctl for device)
I will follow superoneclick developpment (the exploit is extracted from this project)
To be continued ...
Thanks. I created the ftf file over the wizard and flahsed the FW on the Arc.
Works perfect.
Can also confirm, that rooting is not possible...
UserX10 said:
Thanks. I created the ftf file over the wizard and flahsed the FW on the Arc.
Works perfect.
Can also confirm, that rooting is not possible...
Click to expand...
Click to collapse
Good news about flashing
Succesfully flashed by Decrypted ROM (without root...)
Guys why don't you try something to root the ARC like the nexus s phone?
i think they are at the same ver2.3.2
Maybe it will help looking at nexus s dev forum?
i would like to root it as i just brought mine today.
its a generic ver. with no branding of telco.
Nexus S was not rooted. It was security unlocked. Same will be done with XPERIA Arc.
UserX10 said:
Can also confirm, that rooting is not possible...
Click to expand...
Click to collapse
But that doesn't mean it that it will take eternities, or will it? I think about getting the Arc and rooting is not a must, but would be really nice to have for such things as SetCPU...
How much has to be done to enable rooting for it, or will it all be solved by unlocking the bootloader?
i think since the bootloader is now unlockable (& mine is already unlocked ) it would be much appreciated to have recovery compiled for our handsets..
has any1 a clue how to do so?
Question for people that that have created a FTF file.
What loader did you use? If you select the arc, I notice it just hangs. However, if you use the X10 loader it completely very quickly.
Thanks
do we need to unlock the bootloader if we flash the SE rom?
we unlock the bootloader doesn't want the se rom.
Has anyone here decrypted ROM from their phone. I did the SEUS update and placed two files into a folder and decrypted them with FlashTool then when it tried to package it up it get stuck here
"Adding loader.sin to the bundle" and this happens when I select the ARC option but if I do the X10 it goes through.
Any hints?
EDIT:
Attached is the LT15 missing from Loaders folder in Flash Tool for make Bundling available for arc decrypted file.
Will there be any support for the xplay?
Sent from my R800i using XDA App
thatsupnow said:
Will there be any support for the xplay?
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Considering that people all over the xplay forum have already been posting that it's working and people are using it ...
Basically this thread will have all the latest firmwares ready to be flashed, ill try my best to keep it updated, so far it includes the o2 and hong kong firmware, will post others when they get released, if anyone has them, please let me know
Hong Kong Branded
http://www.megaupload.com/?d=J80IGWRK
http://www.multiupload.com/CQ0TB9Q5XB
A big thank you to Rumnyc for providing the files
o2 Branded - no bloatware included, so i suggest flashing this compared to the hong kong version(i found it to be smoother as well)
http://www.multiupload.com/7JF5BD3P9H
Big thanks to superutp for providing the files
Generic UK
http://www.multiupload.com/Y26JCR7DM5
Generic Global
http://www.multiupload.com/ETLCF3ISUO
Thank you to jlmcr87 for providing the files
Generic Sweden
http://www.multiupload.com/TJD9TXU1H7
Thanks to Waden for providing the files
Singapore Generic
http://www.multiupload.com/AHZLTE3JIH
Thanks to iragon for providing the files
Lt15a Generic US
http://www.multiupload.com/7ET97S0A7P
Thanks to kbadone for the files and Nimche for providing the ftf file
Rogers Branded
http://www.multiupload.com/3GRFDY87RC
Thanks to BlueChipJ for the link
Note: Root isnt working using superoneclick or gingerbread method
It will wipe everything so make sure you guys back up your files
Here are the list of changes I found so far and the dump:
http://forum.xda-developers.com/showthread.php?p=14080867
Flash it using flashtool?
Sent from my ADR6400L using Tapatalk
Can be used using fastboot?
- Sent from my Arc thru XDA Premium App
ajftl said:
Flash it using flashtool?
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Yes, that is correct. Flashing it as I type...
thanks mate!!!
lets try try first!!!
anyone able to root with gingerbreak?
Could you please try to root using Gingerbreak? Thanks.
is this a full image or just the system.img (in order not to wipe data and apps) ?
thanks
yes it is a full image, flash using flashtool, and it will wipe everything, so make sure you backup your files, and rooting doesn't work on this firmware unfortunately
Awsmness thank u
Sent from my Arc using XDA premium App
thanks.
I'm familiar with fastboot to flash but not flashtool.
- the HK Rom zip file has two files in it. Do I use them as is or do I need to build a tft file as I read somewhere?
- what do you use to backup your apps and not having to reinstall everything ?
Thanks again
waanz
ignore my previous request. I found this and separate thread
<quote>
Hi here's a guide for flashing a Firmware on Xperia Arc using Flashtool. Below are the links:
Instructions -- http://www.theandroidsoul.com/tutori...-on-xperia-arc
Video guide -- http://www.youtube.com/watch?v=JmmThXTWu74
</quote>
actually still needs to make the tft file from the two files in the zip...
one request:
why dont u guys use rar/7zip to compress these files?
ftf files compress by almost 30% to 70% if u use 7zip (LZMA ultra high compression)
would save a lot of bandwidth, upload & download time...
see:
~280 MB compressed to ~150MB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
erm can someone make the rom rootable by using the previous method, not by using gingerbreak?
Worked great using Flashtool method
Boots in like under 10 seconds now. Extremely fast. Even launcherpro seems to be running smoother. Bloatware is a bit of a negative though easily remedied. Facebook integration is there but tbh makes no difference to me
many thanks～～
DooMLoRD said:
one request:
why dont u guys use rar/7zip to compress these files?
ftf files compress by almost 30% to 70% if u use 7zip (LZMA ultra high compression)
would save a lot of bandwidth, upload & download time...
Click to expand...
Click to collapse
right & great & agree
kiz1983 said:
erm can someone make the rom rootable by using the previous method, not by using gingerbreak?
Click to expand...
Click to collapse
hi kiz, you may look at the thread by kanzone, he updated it with this new HK rom
Here is the final version of Flashtool, compatible with Z/ZL
To clarify about bootloader unlock/relock :
Q : Can Flashtool unlock bootloader for a first time unlock ?
A : Yes, it does it using official sony method (get key, then issue the right fastboot command)
Q : Can Flashtool relock bootloader ?
A : Yes
Q : Can Flashtool unlock bootloader after a relock ?
A : Yes.
With this release, before unlocking first time, root your device and you will be able to backup your TA partition (Raw ta backup). By doing this, you will be able to relock / restore your TA partition and have back BE2 and all DRM keys.
Happy flashing
Flashtool can be downloaded from this page
For those having issues downloading, you can try this link : unrestrict.li Flashtool homepage
Very Good。
the complete version of FT should take some time as Androxyde is rebuilding/redesigning the entire interface, but till then this will have to do...
Androxyde said:
When flashing, you cannot exclude/include sin files. This release cannot create bundles too.
Click to expand...
Click to collapse
Hello,
thank you very much for your work
can i decrypt the file with this minimal version...then create bundles with the previous realease???
if not how to???
thanks again
works very well in C6602~ thanks!:good:
black97one said:
Hello,
thank you very much for your work
can i decrypt the file with this minimal version...then create bundles with the previous realease???
if not how to???
thanks again
Click to expand...
Click to collapse
yes u can decrypt the file and then create bundle with older FT versions...
can i use the older bundle here: http://forum.xda-developers.com/showthread.php?t=2157794
if i replace the correct loader.sin ? (because din't have original file from SEUS)
black97one said:
can i use the older bundle here: http://forum.xda-developers.com/showthread.php?t=2157794
if i replace the correct loader.sin ? (because din't have original file from SEUS)
Click to expand...
Click to collapse
i have created an FTF... wait i will post it...
EDIT: it already work with the french firmware i post here: http://forum.xda-developers.com/showthread.php?t=2157794
thanks for the help
Flashtool beta for z ....
french firmware test ok。
Blob fs Files
yeeson said:
french firmware test ok。
Click to expand...
Click to collapse
Thnx
Many thanks Androhyde and DooMLoRD for their work!
I have a few questions.
1. When creating a firmware normal Flashtool v0.9.10.1 does not know how to define multiple files.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there a risk? Or beta Flashtool, when flashing the firmware of received, all the files correctly identify and sew the right sections?
I looked at the French firmware - it has the same structure as the creation of me, so I'm pretty sure of the correctness of their actions, but would like to know your opinion.
Thanks in advance for your answers.
dogsly said:
Many thanks Androhyde and DooMLoRD for their work!
I have a few questions.
1. When creating a firmware normal Flashtool v0.9.10.1 does not know how to define multiple files.
View attachment 1761905
Is there a risk? Or beta Flashtool, when flashing the firmware of received, all the files correctly identify and sew the right sections?
I looked at the French firmware - it has the same structure as the creation of me, so I'm pretty sure of the correctness of their actions, but would like to know your opinion.
Thanks in advance for your answers.
Click to expand...
Click to collapse
Don't worry, all files will be treated and sent to the phone
Androxyde
Thank you, we will wait for the further development of the program.
Please delete
i can not download it, i have a very strange file ended with JS, is this the right one ?
has anybody mirrored this =?
Hi,
I want to use the backup/restore TA option.
If i copy the folder \Flashtool\devices\C660x (from Z flashtool) to original version v0.9.10.1\Flashtool\devices\..
is it work??
AW: Flashtool beta for z ....
Lef.teris said:
Hi,
I want to use the backup/restore TA option.
If i copy the folder \Flashtool\devices\C660x (from Z flashtool) to original version v0.9.10.1\Flashtool\devices\..
is it work??
Click to expand...
Click to collapse
You should not use TA option yet. With old flashtool loader sending is not correct for Xperia Z and new version is not TA option implemented.
Better wait a little!
Sent from my C6603 using xda app-developers app
Bin4ry said:
You should not use TA option yet. With old flashtool loader sending is not correct for Xperia Z and new version is not TA option implemented.
Better wait a little!
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
ok! thanks!
Hello,
Shouldnt a FULL UPDATE install "all" necessary like partitions for the system etc, i mean everything?
Why am i asking this?
Because recently i debranded my P9+ and now i have 3 problems:
1. Icons look like Huawei P8 series
(@Emui 3.x)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Some features are not function as before, like - Themes (can download but can't apply)
3. Factory reset now always goes as "lowlevel reset"
As my understanding this might be because when failed on debranding phone woke up asking decryption storage password (and shouldn't) then he did a wired wipe out before restart again and then started with the problems i said on top
I also know it affected system folders in any way because, for example, at locked screen when I press settings there are none "subscriptions" to choose.
migueli2 said:
Hello,
Shouldnt a FULL UPDATE install "all" necessary like partitions for the system etc, i mean everything?
Why am i asking this?
Because recently i debranded my P9+ and now i have 3 problems:
1. Icons look like Huawei P8 series
(@Emui 3.x)
2. Some features are not function as before, like - Themes (can download but can't apply)
3. Factory reset now always goes as "lowlevel reset"
As my understanding this might be because when failed on debranding phone woke up asking decryption storage password (and shouldn't) then he did a wired wipe out before restart again and then started with the problems i said on top
Click to expand...
Click to collapse
What's ur new build number?
Abdo2 said:
What's ur new build number?
Click to expand...
Click to collapse
B181
migueli2 said:
B181
Click to expand...
Click to collapse
U need to flash the hw and dt folder toghether with stock firmware to bring back stock icons, put them toghether with update.app in dload folder and flash. U can find theme here.
http://huawei-updates.ru
Mostar088 said:
U need to flash the hw and dt folder toghether with stock firmware to bring back stock icons. U can find theme here.
http://huawei-updates.ru
Click to expand...
Click to collapse
Hi.
I did that already...
migueli2 said:
Hi.
I did that already...
Click to expand...
Click to collapse
I had the same problem but when i flash the first stock firmware B101 with the hw and dt folder it was returnd to stock for me.
Mostar088 said:
I had the same problem but when i flash the first stock firmware B101 with the hw and dt folder it was returnd to stock for me.
Click to expand...
Click to collapse
I'm missing more features that only icons.
Probably everything because of the lowlevel restart.
migueli2 said:
I'm missing more features that only icons.
Probably everything because of the lowlevel restart.
Click to expand...
Click to collapse
Just i said i had the same problem when i debrand my L29C636 and that fix it for me.
flash all zip file with twrp , then reboot and force flash update.app with 3 button method, now everything is stock
I had the same problems when I flashed a 'full' ROM as well (B190, for reference). Had the same ugly icons you mentioned, and I had lost MagazineUnlock plus all stock themes.
In the end I found the themes, and it seems to have fixed both the icons and unlock.
Main issue now, is that each time it does a factory reset (when unlocking boatloader for instance), it fails and prompts me to run it again, which it then completes successfully. Not sure what I messed up on there, but it's just a minor annoyance whenever I have to flash an update now.
Updated kangvip to version M9_B211
Download M9_B211_Кangvip: https://drive.google.com/file/d/0BxUuiDq_FRA_SGFyWFZTNWY2dFk/view?usp=sharing
Original link http: //cn.club.vmall.com/thread-12639964-1-1.html
I've flashed it now. I'll prove that it works
Im totally confused about this phone, too many versions, Im on C635 and I cant find what rom I should use without bricking my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
[email protected] said:
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
Click to expand...
Click to collapse
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
lemonade747 said:
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
Click to expand...
Click to collapse
There is no Kangvip B183 for Mate 9. Only Kangvip B175, B186, and B211. I am on C567B183 and I flashed KangVip B186 without problem. Since you are on B130 you should start with Kangvip B175 and see if it works.
bscnym said:
Click to expand...
Click to collapse
how to get that windows on screen. cant see any options for that window view on ksettings
got it on adb type: adb shell settings put global enable_freeform_support 1 and reboot then press recent an select square button next to lock app button
nougat freeform move can also be achieved by downloading Root Essentials, scrolling to the interface tab, and selecting freeform mode..
Sent from my MHA-L29 using Tapatalk
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
you must have base rom B211 for flash rom kangvipB211. I think you must rebrand to rom china and update ota to B211.
Anybody here already testing it? Any clue if the GPS bug is solved?
rsm86 said:
Anybody here already testing it? Any clue if the GPS bug is solved?
Click to expand...
Click to collapse
I have C567B183 I flashed this rom (B211). It booted up but some functions did not work properly. However I just flashed the boot image from Kangvip 186 and everything works fine.
Maybe auras76 thinking ahead on RomAur 1.6??