download link is http://www.multiupload.com/X558NDM1WO
Tested on my bell atrix
If no signal or unknown baseband is found, just flash to other radio
it wont break the phone unless you have done sth awesome
UPDATE: I am upgrading this radio on top of France Orange 2.1.1
I don't own a ATT Atrix so I am not sure whether it works on ATT Atrix or not
ytwytw said:
download link is http://u.115.com/file/e615oxg1
then click on "电信下载" to start downloading
Tested on my bell atrix
trying to upload the radio file to the forum now... but really slow!
(YES, you know bell DSL sucks)
Click to expand...
Click to collapse
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
josuetenista said:
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
Click to expand...
Click to collapse
I believe other radios have been used on the AT&T atrix before, you should be good to use this. If you end up w/o signal just flash SBF and you'll be back to normal.
Sent from my MB860 using XDA Premium App
and what can u say about new radio? is there smth new? smth better?
some att plz test it !!
What's the point of this radio?
Sent from my MB860 using XDA Premium App
frankiedizzle87 said:
What's the point of this radio?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
agurzhiy said:
and what can u say about new radio? is there smth new? smth better?
Click to expand...
Click to collapse
I just flashed yesterday, gonna see how it works (Bell Canada)
The point is to share...
however in China only 2100 band works, so I assuming it works better for Europeans instead of Americans
Let's see...
For a second there I had hope that it would be the same version as the stock Bell radio. (1.77, I had to look it up)
I am guessing that since China has some differences in their mobile networks compared to NA, it might be interesting to see if it improves things over here.
Cheers!
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
laitalk said:
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
Click to expand...
Click to collapse
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes please, iam be the first ,iam sure we all want to try it
Didn't work for me tried flashing it twice even without the sim and sd inserted. I get no service and the phone menu doesn't allow me to select any bands etc.
Bell device w/ french rom
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes,plz.i'm dying to use it.cuz i'm now living in china,and i uses the att atrix,the baseband don't fit the network.thx.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
from what i can see,
your definition of "benefits" must be very limited. not everyone needs hsupa, i'd live without it if it improves stability.
you have no idea about what ymmv means. with the vast possibilities/combinations of different carriers/terrains/vendors/gen of devices, why would you even ask about the "benefits"? chances are someone would benefit from it but just not you.
racca said:
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
Click to expand...
Click to collapse
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Whipon said:
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Click to expand...
Click to collapse
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
lanyao1920 said:
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
Click to expand...
Click to collapse
what exactly do you think this baseband is gonna do to an at&t sku?
you'd most likely go from "loss signal and too much heat" to no signal at all.
i suppose you can just turn on flight mode if you want it so bad.
ytwytw said:
so I assuming it works better for Europeans instead of Americans
Let's see...
Click to expand...
Click to collapse
we have 900/1800/2100
atrix should launch these days in mid europe, maybe there's a better compability with our radio for switching in baseband...
i got a at&t atrix too, no setting for FU baseband, just the american one... (quadband eh?)
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Click to expand...
Click to collapse
baseband does seriosly nothing to packetservice?
Related
Hi,
I extracted the radio from the Bell OTA and created a sbf from it.
Here you go:
Radio N_01.77.15P
Cheers!
Hey man, do you know if this radio or 01.97.00R are the same but just with different naming conventions because of the country?
I've got a Bell Atrix running OLYEM 2.1.1 SBF with GreyBlur and apparently have N_01.92.00R unless the build.prop was changed with the GreyBlur mod. Wondering if I should upgrade to 01.97.00R or N_01.77.15P... voice quality is still slightly poor.
Anyone with a Bell Atrix try both radios yet?
I find it has slightly faster uploads on the Bell network, ~1.7x vs ~1.85.
Cheers!
NFHimself said:
I find it has slightly faster uploads on the Bell network, ~1.7x vs ~1.85.
Cheers!
Click to expand...
Click to collapse
Good enough for me!
I'll give it a flash today after work. Cheers and many thanks!!
NFHimself said:
Hi,
I extracted the radio from the Bell OTA and created a sbf from it.
Here you go:
Radio N_01.77.15P
Cheers!
Click to expand...
Click to collapse
Yeah thanks man i was waiting your post !!! Thanks for your fast work. How is the update running ? Do you think its better than 2.1.1?
Sent from my GT-I9000 using XDA Premium App
I never noticed any real speed difference between stock and 2.1.1, so that it for what it's worth. But I ran my own tweaks on stock and 2.1.1, probably the reason.
Few thoughts, the framework is the same as stock, to be expected since the OTA is a patch, so my deodexed mods work the same as stock (ref translucent dropdown). The music player is the same one from stock, so no hiphop country jazz Internet blur craptastic player as in 2.1.1, and my translucent mod works with it.
Cheers!
Just flash it... Upload a bit faster... Still same ****ty download speed on market btw
Sent from my MB860 using XDA Premium App
hburn said:
Just flash it... Upload a bit faster... Still same ****ty download speed on market btw
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Meh, even when my wireless connects over 20mbps the Market still downloads slowly. It's just the Market. Thankfully apps usually aren't too big.
bongd said:
Meh, even when my wireless connects over 20mbps the Market still downloads slowly. It's just the Market. Thankfully apps usually aren't too big.
Click to expand...
Click to collapse
I thought when i was on my sgs it was downloading as fast as on the browser.... Maybe its me... Lol
Sent from my MB860 using XDA Premium App
Radio works much better for me vs. the 2.1.1 and 2.2.3 French SBF 1.9.2 Radio's.
Thanks!
:Radio N_01.77.15P Cheers! HK TW the same
I'm running that new Orange French gingerbread ROM, can I flash this using RSD, or will it brick my phone?
Well I know this wont help you but I have a bell atrix running att gingerbread and I have this radio flashed and running on my phone ...
IrshaadH said:
I'm running that new Orange French gingerbread ROM, can I flash this using RSD, or will it brick my phone?
Click to expand...
Click to collapse
Hi,
Unlikely, but if you are concerned about the sbf, you can use the cwm version to install it.
radio_CWM_N_01.77.15P.zip
Cheers!
NFHimself said:
Hi,
Unlikely, but if you are concerned about the sbf, you can use the cwm version to install it.
radio_CWM_N_01.77.15P.zip
Cheers!
Click to expand...
Click to collapse
Thanks, will do!
Sent from my MB860 using XDA App
NFHimself said:
Hi,
Unlikely, but if you are concerned about the sbf, you can use the cwm version to install it.
radio_CWM_N_01.77.15P.zip
Cheers!
Click to expand...
Click to collapse
I'm getting an error (status 6) message when trying to flash it via CWM. What is that?
IrshaadH said:
I'm getting an error (status 6) message when trying to flash it via CWM. What is that?
Click to expand...
Click to collapse
That was me trying to replace the updater binary with the smaller one from the Bell OTA, back to the way it was now, download again. I just flashed it again to test.
Cheers!
It's most likely impossible, but for a Bell user to be able to flash an ATT SBF and actually have it work would be amazing. As I'm 99% sure if we ever see gingerbread come from Bell this month (or summer for that matter) it most likely will not have an unlocked bootloader. I'm willing to do whatever necessary in order to help.
I'm no expert, but so far what I know of the difference involves the fact that we were able to install ATT themes/psuedoRoms by booting into recovery and using "Wipe DATA/Factory Reset". (http://forum.xda-developers.com/showthread.php?t=1070076). Why this is so I'm not sure.
Thanks for any consideration of the topic.
Ok. I'm no dev and I don't have bell. However, I was thinking... Could you use recovery to flash a flashable .zip file of the 1.83 update and then unlock that way? Not sure if that would work at all but it just crossed my mind.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!
lyon21 said:
Ok. I'm no dev and I don't have bell. However, I was thinking... Could you use recovery to flash a flashable .zip file of the 1.83 update and then unlock that way? Not sure if that would work at all but it just crossed my mind.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!
Click to expand...
Click to collapse
Wont work cause zip with fail cause can't flash the boot.img file.
Sent from my MB860 using XDA Premium App
stevendeb25 said:
Wont work cause zip with fail cause can't flash the boot.img file.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Got ya. That makes sense.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!
OP - Requests do not belong in the development section. For future reference. It does suck that Bell is lagging so far behind AT&T though...
If your referring to that fact that they were able to get the Chinese version to load onto an ATT phone and then unlock the bootloader and not the Bell then yes unfortunate...But Bell isn't lagging behind ATT...Correct me if im wrong but i don't remember hearing any official announcements about when ATT was going to be getting the official gingerbread update.
On topic, i too wonder if there is a way to merge the two as it seems very fragmented right now.
From what i understand it's a matter of the Bell Atrix having a different "framework" than ATT.
Hopefully some Dev's care enough to maybe make a go at it? =)
my 2 cents
cheers
Guys the UK official gb release is coming out the same day as the ATT one. We can just flash the uk one, unlock, and then flash any atrix roms can we not?
And what garantee the uk one will be unlocked?
guidoido004 said:
And what garantee the uk one will be unlocked?
Click to expand...
Click to collapse
I agree, Motorola said they would only unlock bootloaders where "carriers permit".
However, what would be the result of flashing an ATT sbf, as I don't know if anyonr has tried it but I have heard that RSDLite doesn't allow a Bell phone to flash an ATT sbf. If the hardware in the two phones is identical then at least in theory they should be able to flash either sbf. Or am I wrong?
4real*leb said:
I agree, Motorola said they would only unlock bootloaders where "carriers permit".
However, what would be the result of flashing an ATT sbf, as I don't know if anyonr has tried it but I have heard that RSDLite doesn't allow a Bell phone to flash an ATT sbf. If the hardware in the two phones is identical then at least in theory they should be able to flash either sbf. Or am I wrong?
Click to expand...
Click to collapse
They signed with different sigatures
Sent from my MB860 using XDA Premium App
Another awesomely garbage thread. This isn't YouTube; quit taking dumps on your keyboard and hitting "Submit" at the end. Use the search function, damn it. Did you even consider doing some research before clogging up this board?
mods please move this thread to general or Q&A
OKay, i need someone with a bell phone to please upload their build.prop and PM me with it!
samcripp said:
OKay, i need someone with a bell phone to please upload their build.prop and PM me with it!
Click to expand...
Click to collapse
Now that's taking the bull by its horns!
Can anyone post any updates of whether or not they have sent samcripp their build.prop?
I can't on my phone because i have a different sbf flashed onto it but i DO have my wife's atrix....all I've done to it is root it and freeze the bloatware...
Maybe i can look into where i can locate the build.prop file and send it to you=)
Sent you a link sir
Magnetox said:
Guys the UK official gb release is coming out the same day as the ATT one. We can just flash the uk one, unlock, and then flash any atrix roms can we not?
Click to expand...
Click to collapse
Will the uk build have unlockable BL?
Sent from my MB860 using XDA Premium App running samcripp 2.3.4 fruit cake
msd24200 said:
Will the uk build have unlockable BL?
Sent from my MB860 using XDA Premium App running samcripp 2.3.4 fruit cake
Click to expand...
Click to collapse
Doubt it. As the bell and at&t ota.zips for gingerbread. The bootloaders are still locked
Sent from my MB860 using XDA Premium App
After the ICS update leak, does the bionic support GSM networks?
I highly doubt it. Typically, if a device has the capacity for using a type of cell network, it comes with that capability enabled.
Take a look at this thread, there's a hack to get it to work, but part of it must be done before installing the ics leak.
http://forum.xda-developers.com/showthread.php?t=1297714
linuxgator said:
Take a look at this thread, there's a hack to get it to work, but part of it must be done before installing the ics leak.
http://forum.xda-developers.com/showthread.php?t=1297714
Click to expand...
Click to collapse
Thanks for the link to the superthread, it's a little long and I'm not sure how current the information is. Which pieces need to be done before going to ICS? Is everything compatible with gingerbread .905?
Also, I thought applying the ICS update would overwrite the radio code...
Thanks a lot
danifunker said:
Thanks for the link to the superthread, it's a little long and I'm not sure how current the information is. Which pieces need to be done before going to ICS? Is everything compatible with gingerbread .905?
Also, I thought applying the ICS update would overwrite the radio code...
Thanks a lot
Click to expand...
Click to collapse
I haven't read it too thoroughly as I'm not doing it, but it was just within the last few days where someone posted something about the ICS update issue. My suggestion is to start at the end and work your way back.
It works I'm using it now, ics on att 3g
Sent from my DROID BIONIC using xda premium
stefan.buddle said:
It works I'm using it now, ics on att 3g
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Did you have to do the hack? Does data work also for you?
Sent from my XT894 running ICS
How about European freq bands ie GSM900/1800 UMTS2100?
YES
danifunker said:
After the ICS update leak, does the bionic support GSM networks?
Click to expand...
Click to collapse
Hi Dani.
Yes it does. Mine was operating very well before I bricked it. Go to "Droid on TMobile" and you will learn how to do it.
Good Luck
Regards
Yes there is a guide in the thread on how to do it
http://forum.xda-developers.com/showthread.php?t=1297714&highlight=ics&page=70
Hi everyone,
I have an XT860 from Bell Canada. I would like to mod it. Can someone tell me if it's a Droid 3 or Droid 2?
Also, what are the latest versions of Android available for these devices? The one installed now is 2.3.6 and I would very much like to jump to a Jelly Bean.
I appreciate some input before I waste too much trying to mod this.
Thanks
Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.
MrObvious said:
Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.
Click to expand...
Click to collapse
MrObvious, thanks a lot for the feedback.
1- What is an "860" patch?
2- What is the latest stable version of Android for my device? Not looking for Jelly Bean if camera doesn't work.
3- Where can I find instructions and latest ROMs for my device? ***I don't want to mess up the radio frequencies as it's a Canadian phone***
Thanks again.
Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app
MrObvious said:
Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks
torontobc said:
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks
Click to expand...
Click to collapse
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium
Endoroid said:
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I will go with Minimoto first and then try other MODs. There are many threads on Minimoto. I wonder why there is no sticky "Droid 3 ROMs & Instructions"
So far I learned that I have to install (somehow) SafeStrap and then MiniMoto ROM. Am I getting that correct? Is there a comprehensive guide to this specific to XT860?
Thanks
Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.
MrObvious said:
Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.
Click to expand...
Click to collapse
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?
torontobc said:
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?
Click to expand...
Click to collapse
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium
Endoroid said:
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks
torontobc said:
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks
Click to expand...
Click to collapse
Actually his link goes right to the patch (to the post with the patch)
DoubleYouPee said:
Actually his link goes right to the patch (to the post with the patch)
Click to expand...
Click to collapse
Yes, it does. I was hasty and not waiting for full page to show up. Thanks.
1- I have got Minimoto installed but Android version is 2.3.4 and that is lower than the 2.3.6 that came as stock. Is there anyway to upgrade that?
2- Would overclocking make a major different? Where is the official guide for overclocking for XT860?
Thanks
1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app
MrObvious said:
1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.
torontobc said:
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.
Click to expand...
Click to collapse
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium
Endoroid said:
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?
torontobc said:
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?
Click to expand...
Click to collapse
No, the phone most likely wouldnt even be able to read it. It happens to me pretty regular, I just toggle airplane mode
Sent from my GT-P5113 using xda premium
Hello, i have a galaxy tab 8.9 SGH I957(LTE AT&T version) with 16gb of memory, so all was working good with the stock firmware (3.2 honeycomb), but i bricked my device. So, i bought on ebay a jtag service, and when i received my tablet back, it was in download mode, and as you know guys, it says the model in the same screen, and say P7320, so, i flashed the tablet with the stock rom ICS for the SGH-I957 that i got from a page,
i did the flash by odin, and then, after finish the process, the tablet was alive, all was working fine, except that the intern memory was just of 127mb, now i dont know what can i do, i read something about the partition table, but i hope that you can help me guys, thanks a lot!!
Flash a 7320 rom and keep it as that. The partition tables got changed when you jtag'd it.
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Flash a 7320 rom and keep it as that. The partition tables got changed when you jtag'd it.
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
What stock rom do you recomend me?, because there are many versions of another countries,but no one of an american.
Alonsonbarrios said:
What stock rom do you recomend me?, because there are many versions of another countries,but no one of an american.
Click to expand...
Click to collapse
There is another user, hondaz50, who had the same issue after jtag. He posted in early April. Look for his post and maybe you can pm him and ask what he did.
Edit: Google "my i957 now a p7320 xda"
Sent from my SAMSUNG-SGH-I727
jd1639 said:
There is another user, hondaz50, who had the same issue after jtag. He posted in early April. Look for his post and maybe you can pm him and ask what he did.
Edit: Google "my i957 now a p7320 xda"
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Ok, im going to try tonigth, im nervous, i just need use the .tar file?, or the pit, and the modem too?
Alonsonbarrios said:
Ok, im going to try tonigth, im nervous, i just need use the .tar file?, or the pit, and the modem too?
Click to expand...
Click to collapse
Just use the tar. Put it in odin PDA. Only have auto reboot and f.reset checked.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
just use the tar. Put it in odin pda. Only have auto reboot and f.reset checked.
Sent from my samsung-sgh-i727 using xda app-developers app
Click to expand...
Click to collapse
thanks, i did the flash yesterday, and now my tablet is working like new, thanks, !!!!!!!
alonsonbarrios said:
thanks, i did the flash yesterday, and now my tablet is working like new, thanks, !!!!!!!
Click to expand...
Click to collapse
i suppose that my tablet has a sex change, because it was an i957 and now is a p7320, lol!!!
Alonsonbarrios said:
i suppose that my tablet has a sex change, because it was an i957 and now is a p7320, lol!!!
Click to expand...
Click to collapse
I'm glad its working for you and everything turned out well.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
I'm glad its working for you and everything turned out well.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
That's in part thanks to you, Thanks!!!:good::good:
Alonsonbarrios said:
That's in part thanks to you, Thanks!!!:good::good:
Click to expand...
Click to collapse
Now i have another problem, my 3g is not working, the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band?
Alonsonbarrios said:
Now i have another problem, my 3g is not working, the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band?
Click to expand...
Click to collapse
That's the same problem the other guy had. You might try to send him a pm and see if he solved it. I'm not aware of any radios that you can flash.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app