Hi guys!
This kernel is for stock/MCR ROMs only. I've tried to combine all the best bits from existing kernels into this one. This is based on the stock LG kernel.
First of all special thanks to Benee/Cpujuste since a lot the changes are from their kernels.
Features of the kernel:
* OC to 1500 mhz (minimum is 500 mhz but if you don't change it 300 mhz will work)
* GPU/AVP/VDE have been overclocked
* noop I/O scheduler
* Disabled all LG debugging messages
* 64 mb hack
* EXT4/CIFS built into the kernel
Few other misc changes to the kernel config. This is my first kernel so take it easy on me
Download:
[Release 1]
http://www.mediafire.com/?9g08udzg0d21fmj
[Release 2]
http://www.mediafire.com/?szkweyakk691wx2
[Release 3]
http://www.mediafire.com/?7z7rcw6x136pcaj
Release 3
=======
- Fixed wifi thering
- Updated voltages/speeds a little bit so there aren't any > 100mv jumps as before
- Added multicast support
Release 2
=======
- Reduced AVP/VDE clock speeds
- Changed voltage/cpu tables to:
389 mhz ]
503 mhz ]
655 mhz ] Stock LG voltages/speeds
760 mhz ]
1015 mhz ]
1216 mhz - ] For overclocking
1408 mhz - ] Default voltages are higher
1504 mhz - ]
Release 1
=======
- Initial Release
testing, hope you can release source code someday
info :
testing with FR18, stuck at LG logo...
do i need to make a wipe or wil this do it for me?
smokeweedevery said:
do i need to make a wipe or wil this do it for me?
Click to expand...
Click to collapse
no need to wipe when installing new kernel ...
ok thank
applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
3.) videorecording with camera mod works fine @ highest settings
4.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
5.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k.,
If it´s stable the next 10hrs, i think i will stay with this one, thx !
--------------------------------------------
bugs i found yet :
bootanimation is interrupted when starting 2.nd or 3.rd time (not a big problem)
O2X reboot is not working (reboot & reboot recovery) , or is it because of new CWM recovery 4.0.0.2. ?
tethering not working (tried wifi)
somebody tested the tethereing options with this kernel?
75markus said:
applied at FR18b2, booting ok, did some testing now :
1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)
2.) LG videoplayer plays 1080p fine !
2.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761
3.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793
overall : phone seems very snappy even @ 1000mhz, vibration o.k., couldn´t find any bug yet...
If it´s stable the next 10hrs, i think i will stay with this one, thx !
Click to expand...
Click to collapse
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?
will this work on stock?
fajarep said:
wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?
Click to expand...
Click to collapse
i used MCK kernel r14 without RAM hack before ...
smokeweedevery said:
will this work on stock?
Click to expand...
Click to collapse
This kernel is for stock/MCR ROMs only.
Click to expand...
Click to collapse
i guess so?
peewster said:
somebody tested the tethereing options with this kernel?
Click to expand...
Click to collapse
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
75markus said:
couldn´t get wifi tethering to work ...
notebook connected to phone, but no internet connection ...
Click to expand...
Click to collapse
All the froyo kernels with ramhack and oc have tethering issues, so it seems....
Sent from my Optimus 2X using XDA App
Kenchitech said:
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
Click to expand...
Click to collapse
just do a nandroid backup first, when you choose advanced restore, you can only restore kernel if you want, but i would advise you to make full restore if you need to, cause one module (wireless.ko) seems also different ...
not working on stock rom. cant boot
just had some freeze when playing aroung with pimpmycpu, selecting different scheduler & undervolting,next reboot ended in bootloop -> reverted to MCK r14 ...
seems to be more stable at the moment ...
same here
smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
same here. freeze at LG logo.
smokeweedevery said:
not working on stock rom. cant boot
Click to expand...
Click to collapse
Clean dalvik cache?
Related
NeoBlaze Kernel for stock/MCR
Click to expand...
Click to collapse
Information about kernel, really, this contains everything (almost)
This is based on the newly released LG v10e kernel sources. Now works on both Froyo and Gingerbread stock and MoDaCo based ROMs. Will not work with CyanogenMod based ROMs.
There are 2 versions now, ext3, and a separate ext4 version. Make a backup before flashing especially the ext4 version, in case if it goes wrong.
Features:
- EXT4 built in (finally)
- OC/UV support, overclocking upto 1400 mhz - use pimp-my-cpu (other apps may not work)
- SDRAM, VDE and GPU overclock
- Voodoo Sound
- BFQ I/O scheduler
- SLQB Memory Allocator
- CIFS, TUN
- few other little tweaks inc some designed to improve battery life
- new wireless.ko module
Credits
- Cpasjuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life
INSTALLATION
- Be sure to REMOVE "boot settings" from Pimp My Cpu before installing the kernel to reset default values.
1. reboot to CWM
2. Clear cache
3. Advanced, clear Dalvik
4. install zip from SDcard
5. Reboot
DOWNLOAD
make sure you back up before installing, just incase something goes wrong..
280911 - froyo & gingerbread (doesn't change mount)
280911 - EXT4 FROYO
- Fixed bfq i/o scheduler
- stock voltage at boot (1000mV)
- halt avp when entering suspend
210911b - EXT3 (froyo & gingerbread)
210911b - EXT4 FROYO ONLY
- now works on gingerbread ROMs (thanks to koush, benee and rusty for their work on AnyKernel flasher) (also heads up to TopoGigi for first running it on 2.3)
- touchscreen tweaks, battery tweak
- fixed touchscreen bug
150911
- BFQ now default I/O scheduler
- OC/UV is back
- default clock speed 1015MHz, 950mV
130911
- Added BFQ I/O Scheduler
- Tegra2 specific compiler optimization
- Added SLQB Memory Allocator and made it default allocator
- lowmemorykiller: only check cache for thresholds (Brian Steuer)
- CIFS, TUN
120811 - normal version
120811 - lower OC values
- removed USB accessory (wasn't working properly anyway)
- enabled RNDIS
- fixed init.d permissions (hopefully will solve bootloops)
- added a version with lower oc value - upto 1200Mhz
090811
- Voodoo sound added (thanks supercurio)
070811
- change to UV/OC values
- SDRAM, VDE and GPU overclock (thanks vork and morfic)
- fix for proximity and accelerometer sensor
- USB accessory mode enabled
050811b
- optimised app killing (thanks beene)
- 8 step clock speeds and volts - same as in vorkkernel (hopefully will fix some of the bootloops)
- overclock upto 1400mhz
- compiled with toolchain 4.4.3
040811
- included init.d (thanks ilos for the heads up) - should fix some of the bootloops
030811
- initial release
My Github here
NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning
If you like it dont forget that 'Thanks button'
Thanks!
I will test it!
will this work on fr19???
Thanks a lot for the kernel. Flashed some moments ago and so far no issues.
System feels very smooth, 3g, wifi and bt are working fine.
Kickasskev said:
will this work on fr19???
Click to expand...
Click to collapse
Yes it will, but always good to back up just in case.
Sent from my LG-P990 using XDA App
I have flashed it on my djdroid 0.6 and it works very well atm...
OC is max @1.2ghz.
Thank you Imperticus!
What tool can I use to convert ext3 to ext4?
BR.
flashed on stock V10e => stuck on LG logo ( with progress bar )
ilos said:
flashed on stock V10e => stuck on LG logo ( with progress bar )
Click to expand...
Click to collapse
That's strange, because this is based on the stock v10e kernel. I've only tried it on Modaco based ROMs. Sorry, I can't think of a reason... I'll look into it. Did you manage to flash any other ext4 kernels?
yukkio said:
What tool can I use to convert ext3 to ext4?
BR.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1137218
that's a problem i have each time i try to flash a custom kernel on a stock rooted rom that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...
ilos said:
that's a problem i have each time i try to flash a custom kernel on a stock rooted rom that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...
Click to expand...
Click to collapse
Thats very strange. is that specific to you?
Sorry to say, but is Paul can't find the problem, then I surely won't.
i'm not the only one , take a look here : http://android.modaco.com/topic/340...-ocuv-kernel/page__view__findpost__p__1705341
ilos said:
i'm not the only one , take a look here : http://android.modaco.com/topic/340...-ocuv-kernel/page__view__findpost__p__1705341
Click to expand...
Click to collapse
From what i read so far, seems like a few models can't support kernels that has overclocking over 1200mhz. is that what you experienced?
Imperticus said:
This is based on the newly released LG v10e kernel sources. It will only work with stock/Modaco based ROMs. Will not work with CyanogenMod based ROMs.
Features:
- EXT4 built in (finally)
- UC/OV support, overclocking upto 1300 mhz - use pimp-my-cpu (other apps may not work)
- deadline I/O scheduler
- few other little tweaks inc some designed to improve battery life
- new wireless module
- more to come..
Credits
- Cpujuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life
DOWNLOAD
make sure you back up before installing, just incase something goes wrong..
NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning
If you like it dont forget that 'Thanks button'
Click to expand...
Click to collapse
sorry if you think im picky but is this right, whats highlighted in red above???
Under Clock/ Over Volt
should it not be
Over Clock/Under Volt
Kickasskev said:
sorry if you think im picky but is this right, whats highlighted in red above???
Under Clock/ Over Volt
should it not be
Over Clock/Under Volt
Click to expand...
Click to collapse
I'm sure you know when i meant - corrected 1st post
Imperticus said:
I'm sure you know when i meant
Click to expand...
Click to collapse
hehehe i did say i was being PICKY, but thanks it's does work on FR19
it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.
Am I just being picky again???
Kickasskev said:
it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.
Am I just being picky again???
Click to expand...
Click to collapse
That my friend is what we call a bug lol..the kernel itself has capacity to go to 1300mhz, but for some reason doesn't show up here. I'm working to fix that.
thats no problem, runs great anyway cheers
Hi All,
Here is a first release of my overclocked kernel.
This kernel enables 1.1 - 1.5 Ghz cpu frequencies in cpu governor.
- 1.1 and 1.2 are with Archos stock voltage
- 1.3, 1.4 and 1.5 are with a slight increase of voltage: 1.4V instead of 1.388V
Usual disclaimer: I'm not responsible if you fry your tablet with this kernel, I don't recommend overclocking at all.
I'm personally a bit against it but as many are interested, here it is. My tablet is apparently very stable at 1.2. 1.3 works a little but eventually crashes. Without voltage increase, 1.3 crashes very early.
Instructions:
- Flash this kernel in recovery along with your build initramfs
- Enable overclocked frequency with your favorite tool (setcpu, cpu boost, system tuner).
- If overclock crashes your tablet, power off with a long press (more than 10 seconds) on power button, then you can power on again and try lower overclock.
By default, this kernel boots at 1.0 Ghz to avoid any issue. I don't recommend using it on 4460, it won't bring you anything.
I also enabled tun.ko if anyone needs it.
Let me know how it runs for you!
letama said:
Hi All,
Here is a first release of my overclocked kernel.
This kernel enables 1.1 - 1.5 Ghz cpu frequencies in cpu governor.
- 1.1 and 1.2 are with Archos stock voltage
- 1.3, 1.4 and 1.5 are with a slight increase of voltage: 1.4V instead of 1.388V
Usual disclaimer: I'm not responsible if you fry your tablet with this kernel, I don't recommend overclocking at all.
I'm personally a bit against it but as many are interested, here it is. My tablet is apparently very stable at 1.2. 1.3 works a little but eventually crashes. Without voltage increase, 1.3 crashes very early.
Instructions:
- Flash this kernel in recovery along with your build initramfs
- Enable overclocked frequency with your favorite tool (setcpu, cpu boost, system tuner).
By default, this kernel boots at 1.0 Ghz to avoid any issue. I don't recommend using it on 4460, it won't bring you anything.
I also enabled tun.ko if anyone needs it.
Let me know how it runs for you!
Click to expand...
Click to collapse
great, i'll test it
I report if it works
btw. what did you change in the sources, did you just added the frequencies ?
djnilse said:
btw. what did you change in the sources, did you just added the frequencies ?
Click to expand...
Click to collapse
Yes, with voltage, and removed 1.2 ghz soc check. See attached diff of all changes.
Bonjour et Merci
Fonctionne a merveille sur archos 80g9 jusqu'a 1200 mhz.
encore merci
what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??
ICXPlay said:
what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??
Click to expand...
Click to collapse
nope there are the omap 4430, which runs at 1,0 GHz
and the omap 4460, which runs at 1,5 GHz
for last mentioned overclock to 1,5 GHz doesn't make any sense
ICXPlay said:
what do you mean with: don't use it on 4460??
i thought all g9's have omap 4460 cpu??
Click to expand...
Click to collapse
Only Turbo models have Omap4460 which runs @1.5GHz by default. Other models use Omap4430- 1.2GHz max
lol, yes
i just woke up
i thought i had a 4460 it is a 4430
Edit:
Did you include a autoroot methode in your kernel???
letama said:
Yes, with voltage, and removed 1.2 ghz soc check. See attached diff of all changes.
Click to expand...
Click to collapse
thank you, so in theory it could go even higher ?
what value defines the volt ?
the 1400000
Code:
+#define OMAP4430_VDD_MPU_OPPNUCLE_UV [B]1400000[/B]
or the 0x29 ? :
Code:
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNUCLE_UV, 0, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, [B]0x29[/B], OMAP_ABB_FAST_OPP),
after flashing this i can't enter sde anymore
when i enter sde i just reboot ?
Edit: working now
i need to hold power button and then select developer then release power button and it boots in developer recovery
wow! working great on my 80 G9! thanks letama
My tablet (archos 101 g9) is unlucky with overclcok, at 1200MHz (standard "hotplug" governor) passes all benchs like antutu, quadrant etc. but after a while, "go launcher ex" is refreshed infinitely. at 1300Mhz passes benchs but launching x-plane (flight simulator game) tablet crashes. maybe in my case is necessary overvolt even at 1200mhz. I usually have luck with the phones overclocking... patience! thank you and sorry for my poor englis
Letama, for tun.ko, do u just copy that to the drive along with zimage and initramfs
Shano56 said:
Letama, for tun.ko, do u just copy that to the drive along with zimage and initramfs
Click to expand...
Click to collapse
No, you should boot Android and copy it to /lib/modules through adb or a root file explorer.
hitman72 said:
My tablet (archos 101 g9) is unlucky with overclcok, at 1200MHz (standard "hotplug" governor)
Click to expand...
Click to collapse
Did you try 1100 ?
ICXPlay said:
Did you include a autoroot methode in your kernel???
Click to expand...
Click to collapse
No, it's not really useful with SDE imho.
djnilse said:
thank you, so in theory it could go even higher ?
Click to expand...
Click to collapse
Yes, but I doubt it would be any use except if you open tablet and watercool it
what value defines the volt ?
the 1400000
Click to expand...
Click to collapse
Yes
or the 0x29 ? :
Click to expand...
Click to collapse
I didn't check this one deeply, but it seems related to tolerance in voltage, I have to look deeper. It seems to play a role in raising tensions, so it could be useful to modify value there.
I did this overclock quickly, I'm out of free time these days, but I'm sure overclock addicts could get better results with fine tuning.
hi, at 1100mhz tablet (archos 101 g9) seems stable, better than nothing thank you again. ciao
First of all thanks for the OC kernel! It works perfect with surdu_petru's first ROM. Unfortunately it does not work with his latest ROM, the deodexed version. The touchscreen does not work at all.
Any thoughts or ideas on that? Will there be an updated version of this kernel?
Thanks in advance!
JayVee said:
First of all thanks for the OC kernel! It works perfect with surdu_petru's first ROM. Unfortunately it does not work with his latest ROM, the deodexed version. The touchscreen does not work at all.
Any thoughts or ideas on that? Will there be an updated version of this kernel?
Thanks in advance!
Click to expand...
Click to collapse
Can you give me a dmesg quickly after boot ? It could be modules that are not loading or something else.
HI !!!
I am pleased to present my new Update - [email protected]_V02 - based on Archos ICS Firmware 4.0.5(4.0.3)...
This release is permanently Rooted and Busybox is already installed !
If the first version [email protected]_V01 went pretty hard, now I have made effort to achieve a rapid and stable version -> [email protected]_V02 ;
Now this version comes to the aid of amateur overclocking fans !!!
- so we can overclock our device =>
- Stock 1GHz -> Max. 1.18GHz ( 1.06GHz - 1.12GHz - 1.18GHz );
- Stock 1.2GHz -> Max. 1.32GHz ( 1.24GHz - 1.28GHz - 1.32GHz );
- Stock 1.5GHz -> Max. 1.68GHz ( 1.56GHz - 1.62GHz - 1.68GHz );
Included : 02/05/2012
- boot animation;
- battery percentage, and other new Icon;
- several applications in addition ( Office Free, Root-Browser free, Terminal, FaceLock and ....++);
- enabled init.d for run scripts ;
- windows animations on;
- windows animations can turn off ( see Spare Parts+);
- increase sdcard speed;
- zipaling for all apk in /data/app/*;
- module tun.ko for enable VPN;
- custom Kernel for enable Overcloking;
- other stuff to improve performance ;
How to install :
You can flash this Custom Rom as usual => copy archos.ext4.update into Internal Storage or /data/media/ or /mnt/storage/ ; - than into SDE -> choose Flash Kernel and Initramfs -> here you need to copy zImage and initramfs !
For beginners : you can find installation details here ! => Thanks @Shano56 => http://forum.xda-developers.com/showthread.php?t=1542058
The files you need to install : [email protected]_V02 =>
- download ( ics_blue_update.zip) => https://hotfile.com/dl/154778665/e6b99ad/ics_blue_update.zip.html => https://rapidshare.com/files/3982555368/ics_blue_update.zip
- download custom kernel ( ics_blue_kernel.zip) => http://www.4shared.com/zip/rI2-rhMF/ics_blue_kernel.html => http://www.2shared.com/file/triOUMDR/ics_blue_kernel.html
CAUTIONS !!!
- I advise you to overclok your device with moderation !
- I'm NOT responsible for damaged equipment after overclocking !!!
This Custom Rom [email protected]_V02 work on all tablets gen9 : is stable, fast and can be used as a daily ROM ! ( NOT available for maximum overclocking !!! )
regards,
surdu_petru
Update failed: (1)
Okay, ignore this post: user error.
Nothing to see here. Move along...
Sorry this version is not running well on my device. It makes it nearly unusable. Every time reboots no matter what I am doing.
For the moment I use your rooted stock 4.06 version. Runs nearly perfect. THX for that.
Sent from my GT-I9100 using XDA
nice. you have changelog ?
anyways I am wondering about your max overclock speeds. is not 1.0ghz stock and 1.2ghz stock the same processor? if so why limit 1.0ghz stock to 1.18ghz
Shano56 said:
nice. you have changelog ?
Click to expand...
Click to collapse
Second! Would love to see a changelog if available!
anyways I am wondering about your max overclock speeds. is not 1.0ghz stock and 1.2ghz stock the same processor? if so why limit 1.0ghz stock to 1.18ghz
Click to expand...
Click to collapse
Some are, and some aren't. Early G9s had OMAP 4430 processors designed for 1.0GHz operation, while later G9s in had OMAP 4430s designed for 1.2GHz but were downclocked to meet demand for the lower-end model. You can read this post here to see how you can determine which processor you have.
While we're talking about overclocking, I see that the new kernel is not overclock-enabled. (The first post is actually a little conflicting on whether the kernel released has overclock capabilities.) Any chance of getting an overclock-enabled kernel with your new tweaks?
- Stealth Dave
stealthdave said:
While we're talking about overclocking, I see that the new kernel is not overclock-enabled. (The first post is actually a little conflicting on whether the kernel released has overclock capabilities.) Any chance of getting an overclock-enabled kernel with your new tweaks?
Click to expand...
Click to collapse
thanks for that. I remember seeing that actually now that i think about it
Okay im adding [email protected] instructions to my guide. what is the .ext4.update file named?
PS you can tell them to look for the big STEP 4 in bold letters in my guide
for the Buzz in France
http://www.jbmm.fr/?p=27760
For the update, just replace the file ?
First of all ... Thanks.
But, if I'm not wrong this version is odexed ... and we cannot change services.jar to ICS oom fix.
Also with this version and at 1.2Mhz my antuto score decreased from 6200 to 4600 ... spooky.
In the end, I cannot see to many diferences from v1, only OC ...
Regards.
Hello
Thanks For your Job
Just One question.
When I flash with your kernel i m blocked at 1Ghz it s normal?
Thanks for your Time, for increase the perfs of our Tablets
thams said:
Hello
Thanks For your Job
Just One question.
When I flash with your kernel i m blocked at 1Ghz it s normal?
Thanks for your Time, for increase the perfs of our Tablets
Click to expand...
Click to collapse
HI !
No, isn't normaly !!! ....sorry ! I re-upload the kernel files !!! Good luck !
i have the same problem
impossible to up the Ghz with setcpu
setcpu said no rooted and SU said yes rooted
i use an archos 8" 1 ghz
HI !
This time it's OK ! I re-uploaded the files ( zImage and initramfs ) - now should be work "overclock" on all device !
NOTE: For me, I say for me ( with g9 101 Turbo stock 1.2GHz) this version V02 seems to be more smooth and more rapid movement compared with the previous version V01 , and all this with stock 1.2GHz; ...and of course is pretty fast if I'll activate overclocking options !!!
cajl said:
i have the same problem
impossible to up the Ghz with setcpu
setcpu said no rooted and SU said yes rooted
i use an archos 8" 1 ghz
Click to expand...
Click to collapse
HI !
Solved ! Please RE-DOWNLOAD ics_blue_kernel.zip ! ...sorry !!!
not the update ?
Well done for me
Thanks
Ok for me
from 300 to 1180 !
Shano56 said:
nice. you have changelog ?
anyways I am wondering about your max overclock speeds. is not 1.0ghz stock and 1.2ghz stock the same processor? if so why limit 1.0ghz stock to 1.18ghz
Click to expand...
Click to collapse
HI !
Sorry ! have not yet changelog ! ....and I'm not sure they have the same processor ( for stock 1GHz and stock 1.2GHz).
I made the maximum frequency ( 1.18 ; 1.32 and 1.68 GHz ) to keep the device in normal operation even if you choose max. frequency ! - frequencies can be clocked much higher ...but do not see the point as long as the device does not work properly !!!
cajl said:
Ok for me
from 300 to 1180 !
Click to expand...
Click to collapse
HEY !!!!! What is 300 ????? and What is 1180 ?????
the number of all my archos
cajl said:
the number of all my archos
Click to expand...
Click to collapse
I think he means to say in cpu control app the min frequency is 300mhz and the max is 1180mhz
Anyways, could I get the file name of the .ext4.update ? is it just "archos.ext4.update" like usual ? I have not downloaded this, so i need to ask for my guide
EzyICS Kernel v1
for 6800 For Stock XXLQ1 (Austrian) Roms
FEATURES - Version 1 (31/07/12)
1) Built from GT-P6800_ICS_Opensource_Update1.zip
(Thanks Samsung for broken config settings. / Took me ages to figure out some kernel issues!!!)
2) Various compiler optimizations (neon etc.) ( Debug stuff remains for now but will be taken after some more mods are added )
So should get smoother / more optimised in time
3)Mali state tracking disabled
4) Removed MMC_CAP_ERASE (BrickBug)
5) /etc/init.d/S* script support
Add your various tweak / ramscripts from custom roms etc. here
6) Added Pegasusq Governor - (recommend as it deals better with multi-cpu devices like our tabs but may require some tweaking)
7) Overclocking Support upto - 1600 mhz
(ICS changes how frequency control is implemented so not as easily overclockable as honeycomb.)
Fixed CPU Boot Up frequencies to default values / not overclocked settings
8) Undervolting Support:
Some of my settings - (ALL DEVICES will be different)
I have only tried undervolting at these frequencies so far 200 / 500 / 16000 hz (As these are the most used)
So far running pretty stable on:
1600 mhz -------------------> 1300mv
1400 mhz -------------------> 1250mv
1200 mhz -------------------> 1175mv
1000 mhz -------------------> 1075mv
800 mhz ---------------------> 1000mv
500 mhz ---------------------> 875mv
200 mhz ---------------------> 875mv
Use SetCpu to change voltages or cpu overclocks.
9) Slightly undervolted GPU voltages
(As ICS is not as overclockable as honeycomb - needed to reduce heat)
Reduced by 50mv for default GPU levels
10) Bootanimation support
place in /system/media
11) in built CIFS support
Changed Max_BUFFER Size to max 130084
Thanks to Pinkowl for first supporting this.
In cifs options put:
rsize=130048
12) NFS share mounting.
13) UDF & ISO support - i.e native bluray disk support.
Other optimizations & stuff - to be added.
Believe me this stuff takes a whole lot of time to do & test - with high risk etc.
Please support my works and further development on 7.7 tabs by purchasing my apps (only 1 for now on google play. Latest version adds MTP/UMS switching for 7.7 tabs)
https://play.google.com/store/apps/details?id=hokikoki.ezymountcontrol&hl=en
Installation:
**Important***
Make sure backup your device first in CWM.
As this is a kernel only - it does not flash over your data/apps/system etc you should be able to simply restore boot.img from advanced restore settings in CWM if things go wrong. I have done this myself.
I am still using my previous cwm (honeycomb based kernel) and it is working fine for me. So should any other honeycomb based kernel cwm recoveries should be ok too)
1) You can either simply flash zImage using heimdall:
(THIS WILL INCREASE YOUR BINARY DOWNLOAD COUNT OR WHATEVER ITS CALLED)
sudo heimdall flash --kernel zImage
(zImage is in cwm flashable zip file)
or
2) Flash in the CWM
p6800_EzyICSKernel.zip
No need to wipe data cache
( I need someone to confirm that CWM flashing works, as I use heimdall)
Usual disclaimer - flash at your own risk.
(Souces code changes added below)
Cheers,
List of Reported Issues - to be addressed in next version hopefully.
Although there is no reason to wipe data / cache etc when using this kernel or restoring stock kernel.
1) Wiping from within Android ICS may cause boot loops.
If you insist of wiping within Android ICS - please go back to stock kernel- first restore (stock kernel) boot.img from andvanced restore / in cwm. then do a wipe
Alternatively - just wipe in data/cache in CWM and you should be fine.
ezynow
Yeah!
Cwm works fine. Noticeable perfomance increase.
{Diemex} said:
Cwm works fine. Noticeable perfomance increase.
Click to expand...
Click to collapse
Good to know.
This just a base kernel really (some unnecessary things left in) - should get better and smoother in time
Idem...installation ok with Recovery Custom v6.....I test my machine for The moment......all is ok....nosoftbrick!
+1 for your appli!
ezynow said:
EzyICS Kernel v1
Please support my works and further developmen
https://play.google.com/store/apps/d...zymountcontrol
Click to expand...
Click to collapse
link is not working
EzyMount....play store
https://play.google.com/store/apps/...e=google&utm_medium=organic&utm_term=ezymount
☞ From my Humans Phone | Jelly Bean using Tapatalk
i have already found him, thx.
bamserl said:
i have already found him, thx.
Click to expand...
Click to collapse
Cheers - updated now
Hello ezynow
Does this Kernel solve issue with internal memory partitions ? , I have my Tablet issue with custom ROM and I had to move DATAFS and FACTORYS Partitions in order to make Tablet work , it doesn't accept flashing by ODIN but it can work with Aroma ROM , so can this Kernel help my problem to restore lost partition are ?
amroman said:
Hello ezynow
Does this Kernel solve issue with internal memory partitions ? , I have my Tablet issue with custom ROM and I had to move DATAFS and FACTORYS Partitions in order to make Tablet work , it doesn't accept flashing by ODIN but it can work with Aroma ROM , so can this Kernel help my problem to restore lost partition are ?
Click to expand...
Click to collapse
It will not change the partition structure.
Have you tried heimdall. I would suggest try using one of the first released honeycomb firmwares as it should be a wipe one i am guessing.
Once back on hc then flash ics.
Worth a try.
So by flashing this kernel i can overclock in Setcpu to 1600mhz?
Applied this server over ICS Quckisilver 1 pre. Works perfect. Udervolted by 50 throughout the full spectrum.
Sent from my GT-P6800 using Tapatalk 2
ezynow said:
It will not change the partition structure.
Have you tried heimdall. I would suggest try using one of the first released honeycomb firmwares as it should be a wipe one i am guessing.
Once back on hc then flash ics.
Worth a try.
Click to expand...
Click to collapse
Hello
I tried many times to access device using heimdall but i receive error
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I tried Zadig as well but no luck at all , any suggestions ?
CM9 ?
I'm taking from past experience that this will not work with cm9? am I right? If yes Could you make one for cm9 for my p6800?
Verry much appreciate your work! I love OC UV-ing!!!
amroman said:
Hello
I tried many times to access device using heimdall but i receive error
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I tried Zadig as well but no luck at all , any suggestions ?
Click to expand...
Click to collapse
Are you in download mode. I use linux for heimdall so if its a driver issue you will need to specific ones for your distro. Besides having a faulty emmc you should be able to get back to working state. you will need to repartition i suspect but try flashing first.
zsolti256 said:
I'm taking from past experience that this will not work with cm9? am I right? If yes Could you make one for cm9 for my p6800?
Verry much appreciate your work! I love OC UV-ing!!!
Click to expand...
Click to collapse
Cm9 is pretty much vanilla android /linux - so different enough to be incompatible but could be done. This version is a long way off before i could do so anytime soon.
thanks for this awesome kernel.
If anyone has found a way to decrease brightness A LOT below factory thresholds, I would be delighted to know.
Thing is way to bright in a plane or in bed.
lucid said:
thanks for this awesome kernel.
If anyone has found a way to decrease brightness A LOT below factory thresholds, I would be delighted to know.
Thing is way to bright in a plane or in bed.
Click to expand...
Click to collapse
there is an app for that, called screenfilter
Great finally an ICS custom kernel!!!!
Do you think you have any chance to implement LCD undervolting? I come from the original Tab and this can increasw amazingly the battery life
Sent from my GT-P6800 using xda app-developers app
This kernel IS NOT BATTERY FRIENDLY, if your battery lasts for a short period of time don't blame me, you were adviced.
It is fully working (it will have same bugs as 3.1.10 kernel) on Epinter CM10.1 (Android 4.2.2), not sure if it will work on other ROMs.
** The kernel should not damage your device, I take no responsability on this, use it at your own risk **Features:
- OC to 1.2ghz @ 1175mV.
- Powersave and Performance governors enabled.
- Ondemand governor as default.
- Noop I/O as default.
- Thermal throttle starts when CPU reaches 70ºc.
- GPU OCed @ 400 MHz
I've run StabilityTest for half an hour and it was completely stable @ 1.2ghz, max temperature was 65ºc.
Download:
Kernel: http://www.mediafire.com/folder/dhsn6kvp28nnc/Atrix_4g_kernel
Source: https://github.com/Feche/android_kernel_motorola_olympus_oc
Since version r2 there is a new frequency list:
- 200 MHz
- 400 MHz
- 600 MHz
- 800 MHz
- 1000 MHz
- 1200 MHz
XDA:DevDB Information
[KERNEL] 1.2Ghz + GPU OC kernel for Atrix 4g (CM 10.1), a Kernel for the Motorola Atrix 4G
Contributors
Feche
Kernel Special Features: CPU OC @ 1200 MHz - GPU OC @ 400 MHz
Version Information
Status: Testing
Current Stable Version: r2.3
Stable Release Date: 2013-10-13
Created 2013-10-12
Last Updated 2013-10-12
Versions:
r2.3: Minor voltage bumps for stability, disabled cpu hotplug.
r2.2: Fixed 'MDM_SHUTDOWN' error on logcat, fixed 3g data drops? (to be confirmed)
r2.1: Minor voltage tweaks for better kernel stability.
r2: GPU OCed @ 400 MHz, new frequency list, voltages tweaked, removed some governors.
r1.1: Fixed shutdown/restart freezes, fixed USB storage problems.
r1: Initial release.
TODO list:
- OC up to 1.4ghz.
- Enable USB fast-charge. (?)
Thank you for your contribution to the Atrix community. I've been waiting for an OC kernel to arrive
Sent from my MB860 using xda premium
Wi-Fi is not working for me with this kernel, on epinter 27/08 build, is just for me or for everyone?
tested with smartlight it boots up, but I got a power off lately.
which 4.2.2 release from epinter should we use it for best working??
lucasmoney10 said:
Wi-Fi is not working for me with this kernel, on epinter 27/08 build, is just for me or for everyone?
Click to expand...
Click to collapse
Did you wipe cache/dalvik?
jcrahul said:
which 4.2.2 release from epinter should we use it for best working??
Click to expand...
Click to collapse
I am using it with 26/08 build! but it should work with others too I supose..
Thanks a lot
MB860 cihazımdan Tapatalk 4 ile gönderildi
Feche said:
Did you wipe cache/dalvik?
Click to expand...
Click to collapse
Yes, before and after flash the kernel.
Thank you for your work.
I would very much like to try your new kernel, but I need my Atrix for tethering, so please make one with the original bcm drivers.
Much appreciated.
Wi-Fi is not working! epinter 27/08 build.
I wipe the cache/dalvik!
I've added a bcm_4329 WiFi driver version, try that if bcmdhd driver isn't working for you
Feche said:
I've added a bcm_4329 WiFi driver version, try that if bcmdhd driver isn't working for you
Click to expand...
Click to collapse
Thanks for your work Feche.
The WiFi is still not working. I tried both the kernels. Wiped Cache/Dalvik before and after installing the kernel. But the Wifi button still continues to be disabled (Greyed out). I am using Epinter's 08/26 build.
I tried "dmesg" to get following logs:
For bcmdhd:
<4>[ 367.522975] bcmdhd: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
<4>[ 384.335843] bcmdhd: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
For bcm_4329
<4>[ 445.496907] bcm4329: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
<4>[ 445.501556] bcm4329: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
Some other users and I had put together logs for this WiFi problem. We didn't use your kernel back then. But attaching it here anyway as it could be relevant.
http://forum.xda-developers.com/showthread.php?p=45431580#post45431580
Please let me know if I can gather any other logs for this issue. Thanks again.
Feche said:
I've added a bcm_4329 WiFi driver version, try that if bcmdhd driver isn't working for you
Click to expand...
Click to collapse
neither is working for me
Could you try this one? thanks
Feche said:
Could you try this one? thanks
Click to expand...
Click to collapse
Just tried it. Didn't work. But this time there's a different error message in dmesg.
Butterfly effect?
Thanks
I think that Toolchain is breaking WiFi module, when I get home I'll upload a new one. Thanks
I would like to test Real Racing 3 at high settings, but it doesn't work on high settings on CM Roms :/ Atrix can get 12-17 Fps with cm7
btw you got 9K point with antutu
I got 5k points lower than 1ghz version, Do u know why?
Hopefully WiFi should be fixed on this one.
Feche said:
Hopefully WiFi should be fixed on this one.
Click to expand...
Click to collapse
Flashed the kernel. The phone is now in a reboot loop. Now sure how to get back into recovery (i used to use twrp and my volume down key doesn't work). Will try something else and report back.