Database Develop

[Q] HELP: Froyo screwed my galaxy S!

Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
For some reason ive never been able to enter recovery using the volume+home+power button, the only way was through command prompt SDK
Now my obviously problem is, i can't boot the phone so can't reboot into recovery that way.
HELP!

goto samfirmware and download your original firmware with bootloader.
Flash via odin and it should boot you straight into recovery.

Or check out the post I just commented on in this same section.
Cheers,
BS...

Hi - can't see the bootloader on that site :S

they should all come with a bootloader, just download your original firmware.
download odin v1.3, beside the firmware you are downloading should be a PIT number.
Goto the bottom of the page and download that pit number.
Open Odin, and set your pit and pda.
Then set your phone to download mode,
connect, flash, and you should boot directly into recovery

I can't enter download mode. neither 3 button mode works, never has done, can't use up or down for recovery or download.
The only way i've ever been able to get into a recovery console was through ADB.exe which requires the phone to be booted lol.

hmm... lol I dont know man. you might need to return your phone :-(

StonoARGH said:
Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
Click to expand...
Click to collapse
Reboot with the up button on the left, the right one, and the home one.
and then full factory reset, and cache clean.
then reboot and wait

Exact same problem here ... not luck through ADB or FASTBOOT. Stuck!

I have the same issue. Please help.

Same here...I cant get into recovery mode with the 3-button solution

I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from here. Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...

It's an utter nightmare not being able to get into recovery/download. think i'm gonna have to send it off

Brownstone said:
I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from . Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...
Click to expand...
Click to collapse
the links for JG5 aren't working. Do you have any other?

atcasanova said:
the links for JG5 aren't working. Do you have any other?
Click to expand...
Click to collapse
The links worked for me just now...

would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.

My phone was bricked 1 month ago (no download mode, stuck immediately on power on), I didn't send it back to Samsung but I used Riff JTag to repair it and now it's running perfectly.

atcasanova said:
would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.
Click to expand...
Click to collapse
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.

Jordiharrison said:
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.
Click to expand...
Click to collapse
Damn! I'm clicking that link, witch directs me to "coblitz codeen org www romraid com paul galaxys JG5.zip"
i've tried just "www romraid com paul galaxys JG5.zip" and it redirects me to modaco dot com
What do i have to do to download it?????????

Hi, i finally completed the download, had to change some DNS and routes using some proxies
So, I'm really new to android, and i've got a few questions
1) how am i supposed to flash my Galaxy S if i can't turn it on to make my pc recognize it?
2) Brownstone mentioned PDA, CSC and MODEM files. In JG5.zip I have: CODE, CSC and MODEM files. And Odin asks me PDA, PHONE and CSC.
So how will I fill in Odin's fields?
PDA = CODE_I9000XWJG5.tar
PHONE = MODEM_I9000XXJG1.tar
CSC = CSC_I9000XXJG4.tar
??
is that correct?

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

My Note updated with XXLPY now no google service or play store :S

I have update my Samsung Galaxy note n7000 from GB to ICS from phone not from KIES but right after update i can't access play store or any google services. I have factory restore my phone from both the option and 3 buttons restore from recovery. Now when i try to add google account its says can't establish network connection. I have tried to add account from Youtube but no success.
My current version is ICS 4.0.3
PDA:N7000xxlpy
Phone: N7000xxlpt
Csc: n7000oxxlp5
I am unable to log inn any of the account like facebook, youtube or chat, Even if i download the .apk from any other source its downloaded but its does not fetch download the from Internet.
I have checked the phone on many different router there is no problem in wifi connectivity.
While searching on google XXLPY is the culprit here and its the bad update which i got from the OTA now what to do next, i have reset my phone two or three time but all in vain or may be i am lucky that i don't get my device bricked

Dont reset while u r in ICS,for google account try to us ur data connection not ur wifi for adding account, it may work..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

HALT!
You're on ICS - Stop messing about with Factory Resets / Recovery etc..
Downgrade to Stock GB via ODIN - Do your wipes - Make sure it's working in GB - Update to ICS / Flash a Stock ICS in ODIN..

Mobile network is not working too, can any one tell me how to downgrade it or is it safe to flash it with another kernel ??

Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app

CJSlim79 said:
Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply all these Emmc error is going over my head my phone is in warranty should i gave it for warranty claim or try to reflash it with another stock ICS rom ??

Take time. Read through this. Read through this again. Thus will teach you how to reflash safely using odin.
http://forum.xda-developers.com/showthread.php?t=1801341

Have you used Odin before ?

numbnutsuk said:
Have you used Odin before ?
Click to expand...
Click to collapse
yes many time i have used it on my Galaxy Ace but that was low end phone and i don't want to mess with this phone. Its all just because of OTA update from Samsung
My question is that should i have to flashed it with Gb first if yes then which region is safe to flash it with.
P.S i have ask a friend who has flashed it from ICS to ICS of different firmware by using abssyynote kernel :S

This is what my friend told me to do is it safe ?? or can be done in this way ??
i dont need to tell you that you have to be very careful in following these steps,
although i have tried them 5 times on 5 different notes successfully still mistakes can be dangerous so be careful and follow them to the letter and take your time to read before you start
also if you can do this with a laptop its better than a pc because if the electricity cut out it could mess up the phone. its safer to have a battery, btw just as i finished this line we had a black out here lol electricity cut off for the whole block
copy AbyssNotekernel42.zip and CWM.zip to the phone
power off the phone and take the battery out to make sure its off
power it back on holding volume up + home + power to go to recovery mode
choose install zip from sdcard
select the CWM.zip and choose yes install
you will get clock work mode interface then choose install update zip from sdcard again
select AbyssNotekernel42.zip and install it
power off and remove the battery and put it back
power on holding volume up + home + power to go to recovery mode again
this time it the abyss kernel recovery and it works with the touch screen
it is safe to do a factory reset from here so do it
then power off and remove the battery again and put it in
this time power on the phone with volume down + home + power to go to download mode
start Odin on the pc then connect the phone in download mode
click on PDA and then select the rom XXLPD file "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5" and click start
when the phone restarts make sure the samsung logo apears then remove the battery so that it doesnt boot up
start the phone again in download mode volume down + home + power
select the speedmod kernel file and flash it to the phone same way you flashed the rom in PDA select "speedmod-kernel-n7000-ics-k3-11-Odin.tar" then click start
when the phone restarts again remove the battery after the samsung logo apears
power on the phone into recovery again for the last factory reset volume up + home + power
do the factory reset and reboot the phone

There are a few steps missing there. I would go to the link I posted above.
First download Odin 1.85 from link A. 1

Next download pre rooted GB from A.8 and flash it using Odin under pda

Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?

numbnutsuk said:
Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?
Click to expand...
Click to collapse
Thank you very much i will try that

Ask if u need any further help. Let me know how you get on

numbnutsuk said:
Next download pre rooted GB from A.8 and flash it using Odin under pda
Click to expand...
Click to collapse
Can you tell me what do you meant by A.8 in GB :S

OK got it what does A.8 means thanks once again

section A number 8

Then you'll find the ics rom from section B useful guides 1 stock ics roms

can you tell me from where i have to get a PDA file for GB rom ??

going back to stock from ics. how?

hi guys i have galaxy s and now i am on daky ics rom 4.04..
Can you please tell me the exacts steps on how can i go back to a stock gingerbread
because i want to sell my galaxy s to upgrade to s2..
Thanks..

vangelis89 said:
hi guys i have galaxy s and now i am on daky ics rom 4.04..
Can you please tell me the exacts steps on how can i go back to a stock gingerbread
because i want to sell my galaxy s to upgrade to s2..
Thanks..
Click to expand...
Click to collapse
Flash a downgrade ROM or GB rescue kit from My Android solutions, link below using Odin

Signup at http://samfirmware.com/, type "i9000" in the search field, choose the newest ROM released for you country/carrier, download it, flash it...

if u get the files, click here and download Odin v1.85 !
*Make sure Kies is not opened (Task manager > close anything named "Kies") / Battery is more than 80% / don't disconnect until the process is finished !
Open Odin, place the files like this: PDA (choose Code...) / PHONE (Modem...) / CSC (Phone...) and if there's a .PIT file you will see it (it's something like 512.pit). Then get the phone in Download Mode: Vol. Down + Home + Power, connect to pc and wait until appears in Odin. If nothing appears, you will need the Drivers. If appears, make sure repartition is unticked, and others two are ticked. Press START and don't disconnect until the phone restarts.
Done.
P.S.: That worked for me

xViBeR said:
if u get the files, click here and download Odin v1.85 !
*Make sure Kies is not opened (Task manager > close anything named "Kies") / Battery is more than 80% / don't disconnect until the process is finished !
Open Odin, place the files like this: PDA (choose Code...) / PHONE (Modem...) / CSC (Phone...) and if there's a .PIT file you will see it (it's something like 512.pit). Then get the phone in Download Mode: Vol. Down + Home + Power, connect to pc and wait until appears in Odin. If nothing appears, you will need the Drivers. If appears, make sure repartition is unticked, and others two are ticked. Press START and don't disconnect until the phone restarts.
Done.
P.S.: That worked for me
Click to expand...
Click to collapse
It is 4 days old thread,, I think he have already done it

xsenman said:
Flash a downgrade ROM or GB rescue kit from My Android solutions, link below using Odin
Click to expand...
Click to collapse
If want to flash from ICS to GB just need to flash ROM is enough (my device is I9001)?

mizuki_kai said:
If want to flash from ICS to GB just need to flash ROM is enough (my device is I9001)?
Click to expand...
Click to collapse
Depends on which ROM did you put onto the device. I recall if you're trying to go back from CM9 you're going to have to do the 3 files combo via ODIN.

xbesiegerx said:
Depends on which ROM did you put onto the device. I recall if you're trying to go back from CM9 you're going to have to do the 3 files combo via ODIN.
Click to expand...
Click to collapse
Yes. I saw most ICS is from CM9. What are the three files needed?

S5830 - Bootloop problem

Good afternoon,
I have a S5830 here.
Basically my cousin bought it from some one, it was running cyanogenmod.
He didn't like it so asked me to flash stock firmware.
I did so using Odin.
Now the phone is stuck on a bootloop.
Sometimes it even gets to the main menu & then reboots.
Sometimes it just reboots after the samsung animation, depends on which firmware really.
I've tried a couple, no luck, tried flashing a custom rom, no luck.
Tried clearing cache, factory reset and formatting /data /system etc in advance settings & mounting, still no luck.
Tried KIES emergency recovery, still no luck.
Read a bunch of different threads and tried the suggestions there, still no luck.
I think this could possibly be the problem.
When flashing with Odin and the phone gets to a certain stage and displays the following.
Code:
Finding update Package...
Opening update Package...
-- Appling Muti-CSC --
Can't access to '/system/csc/XEU
/system'.
Formatting /cache...
--Appling Muti-CSC --
Can't access to '/system/csc/XEU
/system'.
Rebooting...
Any help would be appreciated, thanks.

bump

after flashing the firmware with odin , go to the recovery and do a full wipe data and wipe cache, you can go to recovery by pressing (power + home + volume up) then reboot and it will work, and you have to wait l little bit
Sent from my iPad using Tapatalk HD

Already tried that mate.
It'll get to the setup screen and a second or two later it will reboot.

G-STAR01 said:
Already tried that mate.
It'll get to the setup screen and a second or two later it will reboot.
Click to expand...
Click to collapse
Hi G-STAR01, in S5830, you go to the recovery by pressing at the same time just two buttons Home+Power .
You could try it and do the wipes.
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN

I know.
What I meant by my previous message was that I went into recovery menu (Home+Power), wiped data and cache.
After that I rebooted the phone, it gets to the home screen/setup screen and then reboots and does the same thing.

It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?

keylocker said:
It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?
Click to expand...
Click to collapse
all that you need to know is here
http://forum.xda-developers.com/showthread.php?t=1034145

Viper The Ripper said:
all that you need to know is here
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
I am not looking out to know the process. Was asking the OP to state the steps so we can help him in succeeding.

keylocker said:
It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?
Click to expand...
Click to collapse
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package, Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 (XDA)
S5830XWKPY_S5830XWKPA_S5830XEUKP1_HOME.tar.md5 (Sammobile)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 (can't remember)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (Sammobile)
S5830XWKPY_S5830XWKPA_S5830CPWKP1_HOME.tar (Sammobile)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (can't remember)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
Also tried seperate files (some website)
S5830XWKPO
BOOT: APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
PDA: CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
CSC: GT-S5830-csc-LUXKP1.tar.md5
PHONE: MODEM_S5830XWKP7_CL407346_REV03.tar.md5

G-STAR01 said:
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package , Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5...
Click to expand...
Click to collapse
Hi G-STAR01, you could try this (from Hubix's guide):
[*]If archive contains only .tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN

G-STAR01 said:
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package, Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 (XDA)
S5830XWKPY_S5830XWKPA_S5830XEUKP1_HOME.tar.md5 (Sammobile)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 (can't remember)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (Sammobile)
S5830XWKPY_S5830XWKPA_S5830CPWKP1_HOME.tar (Sammobile)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (can't remember)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
Also tried seperate files (some website)
S5830XWKPO
BOOT: APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
PDA: CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
CSC: GT-S5830-csc-LUXKP1.tar.md5
PHONE: MODEM_S5830XWKP7_CL407346_REV03.tar.md5
Click to expand...
Click to collapse
Is your phone hot during this process?
Sent from my GT-S5830 using xda app-developers app

BajoPrimate said:
Hi G-STAR01, you could try this (from Hubix's guide):
[*]If archive contains only .tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
Click to expand...
Click to collapse
Just tried it with the H3G firmware.
.tar.md5 as PDA and OPS as OPS.
Still got the same problem, I also tried another wipe after that but still the same.
Blackbox421 said:
Is your phone hot during this process?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
No.

Try changing the CSC for your Phone. Odin error message states that it can't access to the particular folder where the necessary files are present.
Possible ways to me are changing the CSC to the correct one.
You mentioned that you tried flashing Multiple Package too. In that, for CSC(GT-S5830-csc-LUXKP1.tar.md5) you used a file which can be renamed to CSC_GT-S5830_LUXKP1_REV03_user_low_true.tar.md5
Just try it. Can't assure you as a solution but trying is worth it

Just an update.
I tried all the suggestions and others but couldn't get it to work.
Luckily he was able to send it to Samsung for a repair under warranty, they repaired it.